My phone (Asus Zenforce/Zenfone 4) was bricked since some flashing operations and the connection with USB cable (ADB/Fastboot) isn't possible anymore...
From boot screen sequence message : 'E:Unable to open debricking'.
Remains now my microSD and the boot menu after pressing [Power + Vol. up] buttons.. :cyclops:
if you can get to fastboot (droidboot) with [Power + Vol UP] then u can use this guide:
http://www.asus-zenfone.com/2014/10/how-to-unbrick-your-zenfone.html
usb cloverview driver not supported
I have same problem with my zenfone 4. Bricked and stuck at usb mode, so i can't enter droidrobot mode to flash a new stock ROM.
I already used Manufacturing Flash tool and xFSTK downloader to fix, but I think the main problem is usb cloverview driver not supported to zenfone 4, so it can't be detected well with MFTand xFSTK downloader.
woyzer said:
I have same problem with my zenfone 4. Bricked and stuck at usb mode, so i can't enter droidrobot mode to flash a new stock ROM.
I already used Manufacturing Flash tool and xFSTK downloader to fix, but I think the main problem is usb cloverview driver not supported to zenfone 4, so it can't be detected well with MFTand xFSTK downloader.
Click to expand...
Click to collapse
To unbrick the zenfone 4 check the solution in my blog
http://hemanthkandula.blogspot.in/2014/12/how-to-unbrick-asus-zenfone-4-struck-in.html
hemanth.kandula said:
To unbrick the zenfone 4 check the solution in my blog
http://hemanthkandula.blogspot.in/2014/12/how-to-unbrick-asus-zenfone-4-struck-in.html
Click to expand...
Click to collapse
thanks hemanth
the thing is it succeed and after that i just flashed boot.img and erased system.img for test purpose
but realize i'm a big jerk
now my device stuck at asus logo and no cloverview in device manager just it showing MTP USB Device under portable devices section
now i cant boot into droidboot and recovery pls help me out of here
any ideas
W4sh said:
My phone (Asus Zenforce/Zenfone 4) was bricked since some flashing operations and the connection with USB cable (ADB/Fastboot) isn't possible anymore...
From boot screen sequence message : 'E:Unable to open debricking'.
Remains now my microSD and the boot menu after pressing [Power + Vol. up] buttons.. :cyclops:
Click to expand...
Click to collapse
Hi , i have a huge problem which no one (include myself )couldn't solve this.
i have a bricked asus zenfone 4 a400cg , i have tried every soulutions and also it is bricked , the problem is it doesn't flash with any method such as fastboot sd download , cwm and .....
it shows something like this error or another types of errors
E:failed to mount /data (invable argumen...)
E:failed to mount /data (invable argumen...)
/data available size: 0MB, file size 6....
FAIL: no enough DATA space, please free ....
RESULT: FAIL(FAIL:no enough DATA space please free up at least 1017 MB)
and another errors
if this problem is from the hard , please tell me the exact model of it.
the cause that i want to fix it is that i have many memories with this phone
Tyson12 said:
thanks hemanth
the thing is it succeed and after that i just flashed boot.img and erased system.img for test purpose
but realize i'm a big jerk
now my device stuck at asus logo and no cloverview in device manager just it showing MTP USB Device under portable devices section
now i cant boot into droidboot and recovery pls help me out of here
any ideas
Click to expand...
Click to collapse
my t00i have same problem with your phone,how you fix that problem?
I have flashed custom recovery to install the custom ROM through Flasify yesterday night. But unable to open it into recovery mode. After pressing vol+ & power key the Meizu logo comes & phone gets restarted in normal way. Suddenly in the morning phone switched off and gets stuck on flyme logo... I had enable the USB debugging mode but forgot to change the USB connection type to mtp (it is in "only charger mode") . Because of that I think I am not able to connect my device with PC:crying::crying: & also not able to flash the custom recovery through CMD. Kindly help to get rid of this. Service center is to far way from my area..
Thanks in advance...:angel::angel:
debdinna88 said:
I have flashed custom recovery to install the custom ROM through Flasify yesterday night. But unable to open it into recovery mode. After pressing vol+ & power key the Meizu logo comes & phone gets restarted in normal way. Suddenly in the morning phone switched off and gets stuck on flyme logo... I had enable the USB debugging mode but forgot to change the USB connection type to mtp (it is in "only charger mode") . Because of that I think I am not able to connect my device with PC:crying::crying: & also not able to flash the custom recovery through CMD. Kindly help to get rid of this. Service center is to far way from my area..
Thanks in advance...:angel::angel:
Click to expand...
Click to collapse
help plzzzzzz
up up up
Hey all,
I have Zuk z2pro z2121. I wanted more than stock ROM so I downloaded zui 2.5.344. I unlocked bootloader n rooted my phone as well as installed TWRP. "Tool All in one" PC software helped me to carry out above with ease.
While playing around I clicked "Lock Bootloader" and phone got switched off with indicating continuous blue light. I tried pressing vol down + power + Home button, and several other combination but didn't help. When I pressed power button for long, I got Zuk logo onscreen with a white flash on indicator for 1 sec and then again the blue light indicator.
After a little RnD after pressing power button till I got white flash for 3 times and the blue light got completely off. I don't know what to do further. I have backup of my boot , recovery and ROM. Kindly suggest.
Shoaib
Press and hold volume - and power . Release power, after vibration you can release the volume -. You will be in that menu https://ibb.co/f3vOHm . Go to device manager and check if pc recognize your phone https://ibb.co/bHqZOR . Open CMD in adb folder and write adb devices https://ibb.co/cwCg3R . Then adb reboot edl . You are i EDL https://ibb.co/cvjiHm . Use Qfil to flash stock rom
Didn't work...
Thanks for responding. As said, tried pressing Vol + Power and never got any vibrations. Tried Up vol + power, tried Down vol + power. No vibrations.
When I press power button with any combination, this is what happens,
After Approx 15 secs - 1 white light flash in place of blue along with ZUK pic on d display (stays approx 1 sec)
Still keeping power button pressed
After approx 7-8 secs - same as above
Still keeping power button pressed
After Approx 15 secs - 1 white light flash in place of blue along with ZUK pic on d display (stays approx 1 sec)
But now after this third time of flash, blue light appears and after 4-5 secs disssappears. If I leave the button only at this time, the blue light doesn't comes back.
If I leave the power button before or after this sequence, the blue light doeanon the indicator doesn't goes off at all.
What is happening when you connect phone with pc ? Is there any reaction ?
No reaction from PC.
I tried connecting to PC, earlier Tool all in one immediately use to detect, n now there is no response from the PC or the software after making USB connection.
Sir,
As I said earlier, I clicked lock bootloader, n when the screen went off, I disconnected the phone from PC. There is a possibility of the boot partition getting damaged or so. Kindly assist.
Rgds
There aren't any ways to enter in fastboot or recovery , even in service menu . I think you should try deep flash cable to enter in EDL .
Will do as u say. Just one last thing, when I checked device manager in my PC, it showed the phone as other devicez "QUSB XXXX". Question is,
1. Any possibilities of recovery without going for a deep flash, as I got to learn it first.
2. Other part is, my phones battery seems to be drained now. So, it won't be a problem for a deep flash.
Could you give some print screen ?
The matter is that you must switch your phone to edl . Try this yet . Your phone must be turn off .
Press only volume up button for 10 sec and while keeping it pressed,connect phone to PC . Hold volume up until your PC finds a new hardware . It should be android phone - ShenQi composite adb interface . If it doesn't work I have no more ideas apart from df cable . This cable works on Zuk z2 and I think it should works on our Zuk z2 pro
Sir,
I managed to connect the phone via USB as 9008. Miflash not supporting my ROM. Will download Stock ROM n then try with QFIL and MiFlash as well. Thanks for all your support. Will keep u posted about the progres. XML file is not found in any ROMs I have. Miflash some error also but detecting the device. Is there any other tool similar to Miflash, which I can try..
Rgds
First use QPST/Qfil . Follow this guide https://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
Do all steps .
Good day.
I tried QFIL as well as Mi flash tool. Both showing errors. QFIL displaying Qualcomm HS USB QLoader 9008. But when downloading content , it shows Sahara error with even initiating the installation. After browsing a bit, started eMMC software download, and found displaying COM20 No phone connected. Can u assist me to fix this. I mean the phone must be in download mode. But how ?
Miflash, on the other hand shows Hello packet error. Don't know how to fix.
Things I did to fix above errors,
1. Copied ROM to Qualcomm/ bin file
2. Copied ROM to C:/
3. Tried using different USB ports
4. Tried different USB cables
5. Uninstalled n reinstalled USB driver, adb n fastboot, qpst, n miflash many a times along with restarting my PC.
None of the above helped.
I think, if eMMC software download starts displaying COM20 Phone connected, then the issue might be sorted out.
Kindly assist.
Rgds
DrTahseen said:
Good day.
I tried QFIL as well as Mi flash tool. Both showing errors. QFIL displaying Qualcomm HS USB QLoader 9008. But when downloading content , it shows Sahara error with even initiating the installation. After browsing a bit, started eMMC software download, and found displaying COM20 No phone connected. Can u assist me to fix this. I mean the phone must be in download mode. But how ?
Miflash, on the other hand shows Hello packet error. Don't know how to fix.
Things I did to fix above errors,
1. Copied ROM to Qualcomm/ bin file
2. Copied ROM to C:/
3. Tried using different USB ports
4. Tried different USB cables
5. Uninstalled n reinstalled USB driver, adb n fastboot, qpst, n miflash many a times along with restarting my PC.
None of the above helped.
I think, if eMMC software download starts displaying COM20 Phone connected, then the issue might be sorted out.
Kindly assist.
Rgds
Click to expand...
Click to collapse
U need ufs flash not emmc. Change programmer in qfil.
I have a some experience with miflash but I use it for xiaomi . I've never flashed my zuk z2 pro by miflash . If you want to use miflash use 2016.03.30 and run it on PC with win 64 . Create a folder on c: for example "zuk" and copy to that all contents of unrar Qpst/Qfil zui rom . If you have Qualcomm hs usb 9008 that means your phone is in edl ( download mode ) . Good luck
I appreciate all ur support....
As suggested, tried Miflash 30.03.2016 also. This ones showing class not registered.
No of things i did to overcome this errors.
1. Changed my PC to developer mode. Allowed portable device connections n stuff.
2. Visual studio C++ 2010 was installed along with Qualcomm driver, i believe thats sufficient.
3. Disabled my Firewall.
4. Downloaded n copied some atl70.dll file to my syswow64 folder as well as sys32 folder.
Tried all flash tools again after these changes....Same negative results.
Any further advices !!!
Regards
It's fault of drivers . Go to device manager and chose qualcomm hs usb 9800 and update driver automaticly . The second matter concerning of flashing by qpst/qfil - why did you put rom in qpst location ? . It must be for example on desktop in one folder . The simplest path is better . Don't use spacebar . Load content you must chose from that rom . Don't use other location . It's not necessary . Could you give some screenshots with qfil errors
DrTahseen said:
I appreciate all ur support....
As suggested, tried Miflash 30.03.2016 also. This ones showing class not registered.
No of things i did to overcome this errors.
1. Changed my PC to developer mode. Allowed portable device connections n stuff.
2. Visual studio C++ 2010 was installed along with Qualcomm driver, i believe thats sufficient.
3. Disabled my Firewall.
4. Downloaded n copied some atl70.dll file to my syswow64 folder as well as sys32 folder.
Tried all flash tools again after these changes....Same negative results.
Any further advices !!!
Regards
Click to expand...
Click to collapse
Did u use ufs flash in qfil instead of emmc?
Starchm said:
Did u use ufs flash in qfil instead of emmc?
Click to expand...
Click to collapse
Yups !!! I already did with Meta Build Type selection. Didnt Help. I tried to search for mbn file also to try emmc but cudnt find so was stuck with ufs....
mar.ur said:
It's fault of drivers . Go to device manager and chose qualcomm hs usb 9800 and update driver automaticly . The second matter concerning of flashing by qpst/qfil - why did you put rom in qpst location ? . It must be for example on desktop in one folder . The simplest path is better . Don't use spacebar . Load content you must chose from that rom . Don't use other location . It's not necessary . Could you give some screenshots with qfil errors[/QUOTE
https://forum.xda-developers.com/attachment.php?attachmentid=4339940&stc=1&d=1511421690
https://forum.xda-developers.com/attachment.php?attachmentid=4339941&stc=1&d=1511421690
https://forum.xda-developers.com/attachment.php?attachmentid=4339942&stc=1&d=1511421690
Click to expand...
Click to collapse
Last night I turned off the phone and today I want to turn on but nothing only black screen. not able to charge, when I connect to PC I hear sound but only in the device manager can see COM/LTP ports Qualcomm HS-USB QDLoader 9008 (COM4).
I read this is the EDL mode but I don't know how started in this mode.
I installed the ADB, XIAOMI Drivers and MiFlash. After I flashed a chinese stock rom and after flashed the latest global stock rom. The flash was successful but When I disconnect and reconnect again to PC my Redmi 4x is still in EDL mode...
I tried the 2-3 buttons restart and some youtube things but the results is same: Redmi 4x stuck EDL mode.
Plz could anyone help me?
Hi i got an ASUS ROG 3 I003DD ZS661KS - 6A017CN TENCENT edition bricked while updating any solution? I tried everything from computer but not opening at all, screen total black and no recovery mode starts,
Any help is appreciated
what is the device showing identified as under device manager when plugged in from the side port?
Nothing black screen, i tried up down button and power but nothing, few days ago recovery mode worked now nothing.. i tried to look some programm for force boot the phone through pc but all websites link are empty, I don’t know what to do.. i was updating the phone then this happened..
Get the device in EDL mode with working Qualcom drivers and a good connection to your pc. Then follow below guide, all needed looks to be there. You can get the device in EDL mode with a flash cable that you can buy cheap or make one yourself from a USB cable - there are guides online for doing that too.
[UNBRICK/RAW] Revive your bricked ASUS ROG Phone 3 [23-NOV-2021]
Unbrick your ASUS ROG Phone 3 for free!! Don't pay for this stuff anywhere, it's your device and you deserve the right to fix it yourself. I noticed some people in the community charging upto 50$ for the firmware which should've been free from...
forum.xda-developers.com
I connected the phone with EDL cable the computer recognize as Qualcom device etc.. but
i tried to flash the raw stock firmware trough pc and EDL cable but nothing says Sahara error mode while the process