Related
hello, since upgraded from miui v.9.7 to v10 portrait mode on rear camera not working. i tried fastboot flash again and still a bug. anyone can help me or confirm it is a bug ? (v10.0.2.0)
I'm using Xiaomi.eu's beta MIUI 10 ROM & portrait works as it supposed to :/
@engloa Please move this to Mi 8 Q&A. This thread should not be here.
imortalitzik said:
hello, since upgraded from miui v.9.7 to v10 portrait mode on rear camera not working. i tried fastboot flash again and still a bug. anyone can help me or confirm it is a bug ? (v10.0.2.0)
Click to expand...
Click to collapse
Stop posting irrelevant stuff in this forum!, this is getting ridiculous,!!! Where are the moderators to sort things up ffs
imortalitzik said:
hello, since upgraded from miui v.9.7 to v10 portrait mode on rear camera not working. i tried fastboot flash again and still a bug. anyone can help me or confirm it is a bug ? (v10.0.2.0)
Click to expand...
Click to collapse
you should try flash persist ,like this:
fastboot flash persist persist.img
namesuanle said:
you should try flash persist ,like this:
fastboot flash persist persist.img
Click to expand...
Click to collapse
can i flash it without twrp ?
imortalitzik said:
can i flash it without twrp ?
Click to expand...
Click to collapse
you need search how to install and use fastboot
i think flash persist in fastboot mode can solve your problem
persist.img is in the rom file , you should unpacking the package and find it
I've got same problem, but I also have my camera options switched betweend rear and front.
Flashing persist.img doesn't help.
Hello all, i unlocked the bootloader on the xiaomi mi A2 , and i was trying to follow this guide :https://forum.xda-developers.com/mi-a2/how-to/tutorial-camera2api-gcam-root-t3842475 to install the gmcam, but after the point 5. i just rebooted the phone from the recovery, just cause i wanted to try it, after that is stucked in android 8.1 animation, but i have access to the recovery (even if the tool shouldnt have installed it), but dunno what can i do from the recovery, and the device can go in fastboot mode but is not recognized by adb, what can i do?
What version of software was your Mi A2, if it was V9.6.13.0.ODIMIFE, then download the full stock ROM from here
http://en.miui.com/download-353.html
In fastboot mode, adb is not working, fastboot commands works there.
Extract boot.img from images of downloaded ROM.
Put the boot.img in adb folder.
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot reboot
it should start normally
If not, then flash every image like in this post.
https://forum.xda-developers.com/showpost.php?p=77302899&postcount=4
minnuss said:
What version of software was your Mi A2, if it was V9.6.13.0.ODIMIFE, then download the full stock ROM from here
http://en.miui.com/download-353.html
In fastboot mode, adb is not working, fastboot commands works there.
Extract boot.img from images of downloaded ROM.
Put the boot.img in adb folder.
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot reboot
it should start normally
If not, then flash every image like in this post.
https://forum.xda-developers.com/showpost.php?p=77302899&postcount=4
Click to expand...
Click to collapse
Thanks for the help, but, I don't know why, ADB driver were not working properly, didnt recognize the phone so I couldnt follow this guide, and i couldnt switch off the phone either, it was stuck in bootloop, the only thing I was able to do is to put the device in fastboot mode using the button combination..
Luckly the Mi Flash tool was able to recognize the device so I flashed the stock rom with that and now everything is back to normal, I've just a question, the phone sais that the bootloader is still unlocked, is that true? Even if I've flashed from zero the stock rom?
fuffy841 said:
Thanks for the help, but, I don't know why, ADB driver were not working properly, didnt recognize the phone so I couldnt follow this guide, and i couldnt switch off the phone either, it was stuck in bootloop, the only thing I was able to do is to put the device in fastboot mode using the button combination..
Luckly the Mi Flash tool was able to recognize the device so I flashed the stock rom with that and now everything is back to normal, I've just a question, the phone sais that the bootloader is still unlocked, is that true? Even if I've flashed from zero the stock rom?
Click to expand...
Click to collapse
Yep, it's true. You have to relock the bootloader, but this cause full wipe. IMO there's no need to relock the bootloader if you not enable the usb dev mode.
Also, theres an option in mi flash tool to lock the bootloader after flash. Something like flash_all_lock
DO NOT use flash_all_lock_crc. This will cause dead wifi and Bluetooth modem.
I am stuck on the exact same issue. Can you explain in detail all the steps you followed.
Mine was updated to September patch and it is Indian variant.
---------- Post added at 06:16 PM ---------- Previous post was at 05:31 PM ----------
rt1279_isBITW said:
I am stuck on the exact same issue. Can you explain in detail all the steps you followed.
Mine was updated to September patch and it is Indian variant.
Click to expand...
Click to collapse
Nvm I was able to flash that rom but now after the phone locks once the touch is gone until I reboot the device.
Are there any hardware differences in my indian variant or did I just flash it wrong?
I used flash_all.bat and clean all option.
Daniesz said:
Yep, it's true. You have to relock the bootloader, but this cause full wipe. IMO there's no need to relock the bootloader if you not enable the usb dev mode.
Also, theres an option in mi flash tool to lock the bootloader after flash. Something like flash_all_lock
DO NOT use flash_all_lock_crc. This will cause dead wifi and Bluetooth modem.
Click to expand...
Click to collapse
Nono i want to keep the bootloader unlocked, that's why I asked ! Thanks man.
Nvm I was able to flash that rom but now after the phone locks once the touch is gone until I reboot the device.
Are there any hardware differences in my indian variant or did I just flash it wrong?
I used flash_all.bat and clean all option
Click to expand...
Click to collapse
I used the same option, cause it didnt work with the other ones.. I didnt have any issue so far tho, and I dont know about hardware differences, but I dont think a bad flash can cause this kind of problem, not sure tho. Maybe now that everything is working try to flash again a stock rom.
Hi. Well I speak Spanish and I used the Google translator.
Well here is my dilemma. I had my Mi A2 with Miui 10, root and twrp. I download from xiaomi.eu la rom 10.3.14 for Mi6x and the i try to falsh but i didn't delete the folder firmware update. (I do not know if it matters) when I power on the phone remains in boot loop. I did not have access to the recovery or twrp. (vol + + pwr) only to fastboot mode. The Mi Flash program error with the original rom of Mia2 (android one) and the rom mi6x (miui 10). And touching blocking the bootloader. From there I see "the system has been destroyed ...". from that moment I did everything. Test point edl and Mi flash recognize as COM# but the flash error. I tried with the screen in fastboot also skips error. flash rom Mi a2 and mi6x. I try directly from the .bat but close immediately. xiaomi my unlock does not work. I do not know what else to do. I have installed all the usb drivers and nothing. I try with 3 pc's. really the one with the solution is a God.
Have you tried flashing the ROM manually (not with Miflash) from fastboot?
willy899 said:
Hi. Well I speak Spanish and I used the Google translator.
Well here is my dilemma. I had my Mi A2 with Miui 10, root and twrp. I download from xiaomi.eu la rom 10.3.14 for Mi6x and the i try to falsh but i didn't delete the folder firmware update. (I do not know if it matters) when I power on the phone remains in boot loop. I did not have access to the recovery or twrp. (vol + + pwr) only to fastboot mode. The Mi Flash program error with the original rom of Mia2 (android one) and the rom mi6x (miui 10). And touching blocking the bootloader. From there I see "the system has been destroyed ...". from that moment I did everything. Test point edl and Mi flash recognize as COM# but the flash error. I tried with the screen in fastboot also skips error. flash rom Mi a2 and mi6x. I try directly from the .bat but close immediately. xiaomi my unlock does not work. I do not know what else to do. I have installed all the usb drivers and nothing. I try with 3 pc's. really the one with the solution is a God.
Click to expand...
Click to collapse
did you know that this latest beta version of miui 9.3.14 needs to install the hex ne kernel as well? because the default kernel of the loop at boot
cmarcom said:
Have you tried flashing the ROM manually (not with Miflash) from fastboot?
Click to expand...
Click to collapse
Yes. With the .bat but didn't work. The cad Windows close quickly.
Rickk18244001 said:
did you know that this latest beta version of miui 9.3.14 needs to install the hex ne kernel as well? because the default kernel of the loop at boot
Click to expand...
Click to collapse
I really do not know. I followed the steps. and flash the .zip with twrp. zero error and on the turn on was left in boot loop and does not enter recovery or twrp.
this the link the rom: xiaomi.eu/community/threads/9-3-14.49609
willy899 said:
I really do not know. I followed the steps. and flash the .zip with twrp. zero error and on the turn on was left in boot loop and does not enter recovery or twrp.
this the link the rom: xiaomi.eu/community/threads/9-3-14.49609
Click to expand...
Click to collapse
Flash Hex or RA kernel.
willy899 said:
Yes. With the .bat but didn't work. The cad Windows close quickly.
Click to expand...
Click to collapse
thats because the fastboot is not in the same folder as the .bat, and you hast to flash hex v288 for wayne in order to 9.3.14 to boot.
I used Havoc rom
Connect phone to pc in fastboot
In cmd:
Fastboot -w
Fastboot set_active b
And boot twrp
Flash rom, flash twrp and switch partition to A
Forum.xda-developers.com/mi-a2/how-to/guide-how-to-flash-custom-roms-stuff-t3876375
So after trying Xiaomi EU, MiGlobe Rom and Android Q Beta
I decided to flash back to MIUI 10.3.8 via fastboot
Somehow my front camera won't open properly, it kept saying "Can't open front camera, please calibrate".
And when I press Calibrate, popup cam goes up and down 3 times in a row and says "Can't calibrate".
Any idea how to fix this?
EDIT: Must be the fastboot rom I downloaded. Other rom's front cam worked fine...
I am having same issue. Initially I thought it was hardware problem.
But I noticed it seem to be related to software.
Took few restart of camera app and sometime phone restart, for it to work
same problem here
just came from Android Q beta from Mi Global Home, and I decided to go back to MIUI china. The problem occurs after flashing the v10.3.15 china ROM.
Any ideas to solve this?
LogicalMaverick said:
same problem here
just came from Android Q beta from Mi Global Home, and I decided to go back to MIUI china. The problem occurs after flashing the v10.3.15 china ROM.
Any ideas to solve this?
Click to expand...
Click to collapse
Did you install a fastboot ROM or go straight to the latest recovery ROM. If you went for the recovery, then I suggest installing the most recent fastboot ROM, then upgrade to the latest recovery ROM.
Robbo.5000 said:
Did you install a fastboot ROM or go straight to the latest recovery ROM. If you went for the recovery, then I suggest installing the most recent fastboot ROM, then upgrade to the latest recovery ROM.
Click to expand...
Click to collapse
I wiped all partitions via LR. Team TWRP, and flashed the most recent fastboot ROM. Still doesn't work
after analyzing for like 3 hours, I noticed that all sensors are also not working (Gyro, Accel, Proximity, etc). I googled it and found the solution. Here it is:
by flashing persist.img (from the extracted latest fastboot ROM) to persist partition via LR. Team TWRP, all sensors are working fine. Even the camera's calibration now works perfectly
I've got same issue, coming from Android Q beta. I've put the Indian rom and I thought that this is the issue.
---------- Post added at 08:53 PM ---------- Previous post was at 08:50 PM ----------
LogicalMaverick said:
I wiped all partitions via LR. Team TWRP, and flashed the most recent fastboot ROM. Still doesn't work
after analyzing for like 3 hours, I noticed that all sensors are also not working (Gyro, Accel, Proximity, etc). I googled it and found the solution. Here it is:
by flashing persist.img (from the extracted latest fastboot ROM) to persist partition via LR. Team TWRP, all sensors are working fine. Even the camera's calibration now works perfectly
Click to expand...
Click to collapse
What's LR?
degeaba1981 said:
I've got same issue, coming from Android Q beta. I've put the Indian rom and I thought that this is the issue.
---------- Post added at 08:53 PM ---------- Previous post was at 08:50 PM ----------
What's LR?
Click to expand...
Click to collapse
It's referring to the LR.Team TWRP
https://forum.xda-developers.com/k20-pro/how-to/lr-team-wzsx150s-twrp-status-phh-gsis-t3939325
Robbo.5000 said:
It's referring to the LR.Team TWRP
https://forum.xda-developers.com/k20-pro/how-to/lr-team-wzsx150s-twrp-status-phh-gsis-t3939325
Click to expand...
Click to collapse
Problem solved! I flashed via miflash the Chinese rom, in fastboot and the front camera was working. Then I've put the Indian global version and front camera is working fine now.
LogicalMaverick said:
I wiped all partitions via LR. Team TWRP, and flashed the most recent fastboot ROM. Still doesn't work
after analyzing for like 3 hours, I noticed that all sensors are also not working (Gyro, Accel, Proximity, etc). I googled it and found the solution. Here it is:
by flashing persist.img (from the extracted latest fastboot ROM) to persist partition via LR. Team TWRP, all sensors are working fine. Even the camera's calibration now works perfectly
Click to expand...
Click to collapse
Once done!! My device can't use rom (EU, Miglobe, Indian fastboot rom) except China Stable !! Boot is used for the first time, reboot the device it will stuck into TWRP (eu, miglobe), Mi Recovery. Format data can re-enter the system but continue to reboot the device and it will be similar. Go to the log section of TWRP, the whole message is unable to find crypto footer , erros opening data/data.... !! I do not understand which step I made wrong !! Sr for my bad Englosh
Ekalous said:
Once done!! My device can't use rom (EU, Miglobe, Indian fastboot rom) except China Stable !! Boot is used for the first time, reboot the device it will stuck into TWRP (eu, miglobe), Mi Recovery. Format data can re-enter the system but continue to reboot the device and it will be similar. Go to the log section of TWRP, the whole message is unable to find crypto footer , erros opening data/data.... !! I do not understand which step I made wrong !! Sr for my bad Englosh
Click to expand...
Click to collapse
I have the same problem. I'm trying to solve it but nothing for now!
LogicalMaverick said:
I wiped all partitions via LR. Team TWRP, and flashed the most recent fastboot ROM. Still doesn't work
after analyzing for like 3 hours, I noticed that all sensors are also not working (Gyro, Accel, Proximity, etc). I googled it and found the solution. Here it is:
by flashing persist.img (from the extracted latest fastboot ROM) to persist partition via LR. Team TWRP, all sensors are working fine. Even the camera's calibration now works perfectly
Click to expand...
Click to collapse
How did you manage to flash persist.img file? Just one file from the ROM or like in the link below?
I'm getting the same problem with my Redmi K20 (Not Pro) here
http://en.miui.com/thread-478922-1-1.html
topaloglu321 said:
How did you manage to flash persist.img file? Just one file from the ROM or like in the link below?
I'm getting the same problem with my Redmi K20 (Not Pro) here
http://en.miui.com/thread-478922-1-1.html
Click to expand...
Click to collapse
In L.R TWRP, we can flash other kinf of partitions (like persist, for example)
I always used the "persist.img" file of the stock ROM (installed via fastboot). I trasfered it from my computer with ADB. The command is:
Code:
adb push [I]the_path_where_you_stored_the_persist_file[/I] /sdcard/
To to that, go on "Install"->"Install image"->Now choose the persist.img file-> Choose the "persist" partition -> "Flash image" -> Reboot
Then just wait for the MIUI to tell you to calibrate the camera, now it should work!
thelegoboy said:
In L.R TWRP, we can flash other kinf of partitions (like persist, for example)
I always used the "persist.img" file of the stock ROM (installed via fastboot). I trasfered it from my computer with ADB. The command is:
Code:
adb push [I]the_path_where_you_stored_the_persist_file[/I] /sdcard/
To to that, go on "Install"->"Install image"->Now choose the persist.img file-> Choose the "persist" partition -> "Flash image" -> Reboot
Then just wait for the MIUI to tell you to calibrate the camera, now it should work!
Click to expand...
Click to collapse
what if there is no "persist" partition in selection menu. how to make those partition, ive tried using adb terminal by using dd command, but bear no fruit.
thanks for the answer
znsvs123 said:
what if there is no "persist" partition in selection menu. how to make those partition, ive tried using adb terminal by using dd command, but bear no fruit.
thanks for the answer
Click to expand...
Click to collapse
You can't show them up. The only way is to change TWRP, hoping that is supported
thelegoboy said:
In L.R TWRP, we can flash other kinf of partitions (like persist, for example)
I always used the "persist.img" file of the stock ROM (installed via fastboot). I trasfered it from my computer with ADB. The command is:
Code:
adb push [I]the_path_where_you_stored_the_persist_file[/I] /sdcard/
To to that, go on "Install"->"Install image"->Now choose the persist.img file-> Choose the "persist" partition -> "Flash image" -> Reboot
Then just wait for the MIUI to tell you to calibrate the camera, now it should work!
Click to expand...
Click to collapse
I'll try this thank you.
thelegoboy said:
You can't show them up. The only way is to change TWRP, hoping that is supported
Click to expand...
Click to collapse
thanks, not all of twrps are built equally. :good::good::good:
Facing issues with camera pop up calibration and sensors (proximity) after reverting back to stock miui v10.3.3 (Raphael India through fastboot & zip) after flashing android Q Eu rom.
when flashing persist.img through fastboot it gave write protected error. Through LR TWRP, it didnt show any errors but problem is not solved.
I couldnt flash chinese rom through fastboot, faced error saying expected device is Raphael not Raphaelin.
i fixed that problem just flashing chinese.rom via miflash and.camera pop up working again
sagar.anits said:
Facing issues with camera pop up calibration and sensors (proximity) after reverting back to stock miui v10.3.3 (Raphael India through fastboot & zip) after flashing android Q Eu rom.
when flashing persist.img through fastboot it gave write protected error. Through LR TWRP, it didnt show any errors but problem is not solved.
I couldnt flash chinese rom through fastboot, faced error saying expected device is Raphael not Raphaelin.
Click to expand...
Click to collapse
Same problem here
RAJIB AHMED0077 said:
Same problem here
Click to expand...
Click to collapse
try flashing 10.3.16 chinese rom via fastboot yesterday i flash that rom and it fix that problem in my k20 Pro
Hello Guys,
I am facing this weird issue. Whenever i am trying to switch to my front camera the camera keeps switching between both the rear ones. I tried flashing stock, tried different roms, nothing is helping.
Please suggest a solutions. Thanks
gamerboy_010 said:
Hello Guys,
I am facing this weird issue. Whenever i am trying to switch to my front camera the camera keeps switching between both the rear ones. I tried flashing stock, tried different roms, nothing is helping.
Please suggest a solutions. Thanks
Click to expand...
Click to collapse
very unusual sounding problem ...sounds like you tried to play around with vendor props and to make aux camera working
flash stock using miflash ...do it in edl mode using fastboot
fastboot oem.edl
when finished ...BOOT not flash orange fox revovery
fastboot boot recovery.img
*"might be different command depending on pc amd name and location of downloaded recovery
then use a persist restorer flashable zip you can.find in jasmine/wayne official telegram.group and flash that ..
them reboot and use as normal
Thanks, i will try and rever
I tried the process you suggested and followed every step. Even after that the camera is still switching between rear ones. Can't switch to front camera.
gamerboy_010 said:
I tried the process you suggested and followed every step. Even after that the camera is still switching between rear ones. Can't switch to front camera.
Click to expand...
Click to collapse
yeah no bro that is impossible even if nothing is impossible that is 99% impossible and you didn't do everything that i suggested
make a video of the problem and a video of applying my fix
if not i can't help you further ..
Here's what i did.
Rebooted the phone to fastboot - used fastboot oem edl
Phone was detected as COM 10 in Mi FlashTool.
Flashed whole Pie Stock Rom.
Without booting, went to fastboot and unlocked bootloader although it was showing its already unlocked.
Used fastboot boot recovery.img and went into recovery.
Flashed persistrestorer6X.zip, found in Mi A2 telegram group, there is only zip.
Booted the phone. Tell me a few things.
Which stock version to flash?
What's wrong in above steps that i did?
gamerboy_010 said:
Here's what i did.
Rebooted the phone to fastboot - used fastboot oem edl
Phone was detected as COM 10 in Mi FlashTool.
Flashed whole Pie Stock Rom.
Without booting, went to fastboot and unlocked bootloader although it was showing its already unlocked.
Used fastboot boot recovery.img and went into recovery.
Flashed persistrestorer6X.zip, found in Mi A2 telegram group, there is only zip.
Booted the phone. Tell me a few things.
Which stock version to flash?
What's wrong in above steps that i did?
Click to expand...
Click to collapse
what device are you using ?
jasmine or wayne
which recovery did you use ?
_what i can tell you is not all twrp recovery works or can flash persist
_ try to use orange fox but use another recovery that can backup and flash persist ..
press
mount button ...if you don't see persist partition option here the recovery can not flash it even if .zip seems to flash well
look for pie persist.img for your device according to if it is jasmine or wayne ...look for recovery that can mount, backup and flash .img files to persist
---------- Post added at 09:01 PM ---------- Previous post was at 08:42 PM ----------
use these files bro
https://www.dropbox.com/s/w2d2z92yn6115ot/persist.img?dl=0
https://www.dropbox.com/s/zy8prxeum9qbkx5/TWRP-3.2.3-0810-XIAOMI6X-RU-wzsx150-hypeartist.zip?dl=0
https://www.dropbox.com/s/or0n7b6hxagr2ee/4_6050642049911227980.zip?dl=0
if you have jasmine flash persist in both slots
Thanks, i have jasmine. Let me use your files and revert.
Hello,
Sorry took a little longer.
I tried again with the process you suggested.
I used two different recoveries after flashing stock.
1. TWRP 3.2.3 unofficial
2. Orange Fox Recovery
I was successfully able to flash Persist using Orange Fox Recovery but it didn't helped. I was still not able to switch to front camera.
I tried to download and flash another Pie Stock Rom, same thing was happening on that as well.
Now i don't understand how else i can fix this. I have tried different versions of stock, i tried different recovery to flash persist, still the same issue.
gamerboy_010 said:
Hello,
Sorry took a little longer.
I tried again with the process you suggested.
I used two different recoveries after flashing stock.
1. TWRP 3.2.3 unofficial
2. Orange Fox Recovery
I was successfully able to flash Persist using Orange Fox Recovery but it didn't helped. I was still not able to switch to front camera.
I tried to download and flash another Pie Stock Rom, same thing was happening on that as well.
Now i don't understand how else i can fix this. I have tried different versions of stock, i tried different recovery to flash persist, still the same issue.
Click to expand...
Click to collapse
flash stock rom but in edl mode , using Miflash. Use the cmd :
fastboot oem edl
_dont use custom rom
_dont flash in normal fastboot
the only way this problem could be happening is if you were trying modifications in vendor and when you flash a new rom it doesn't overwrite the changes because it is modifying only vendor ...flashing custom roms in recovery won't help , neither will stock in fastboot mode . Only edl mode .... furthermore directly after flashing stock ...flash persist ...that way you start 100% fresh ..if it still doesn't work it is hardware failure
but i can do nothing more for you unless you send videos or photos of you following the steps and the problem with the camera .
**if you know how try removing back and enter edl with testpoint ...flash ... disconnect cameras and reconnect them ... then start phone
***if you remember what you changed just change it back ( did you try modifications? , what did you do ?)
****copy vendor files for camera from friend
Thanks for your help. I managed to get out of this in a weird way.
Flashed Stock in EDL. Tried different different Pie version this time.
Unlocked BL and Critical. Flashed Persist, didn't helped though.
Flashed Derpfest Rom with Mystic kernal and suddenly it started working.
Thanks for the help.
gamerboy_010 said:
Thanks for your help. I managed to get out of this in a weird way.
Flashed Stock in EDL. Tried different different Pie version this time.
Unlocked BL and Critical. Flashed Persist, didn't helped though.
Flashed Derpfest Rom with Mystic kernal and suddenly it started working.
Thanks for the help.
Click to expand...
Click to collapse
no problem man glad you succeeded ... probably it worked but after flashing persist everything usually starts working Normally after a few reboots ..so probably by then it was when you flashed derp
gamerboy_010 said:
Thanks for your help. I managed to get out of this in a weird way.
Flashed Stock in EDL. Tried different different Pie version this time.
Unlocked BL and Critical. Flashed Persist, didn't helped though.
Flashed Derpfest Rom with Mystic kernal and suddenly it started working.
Thanks for the help.
Click to expand...
Click to collapse
today i experienced a funny situation ...i took the new stock update for wayne and then i had the same camera problem ..
after thinking a little i realised it was after uodate so i had to just reapply the api2 for camera and then it started working normally so in future before going the long way make sure to enable api2 again after you update or flash a new thing . if camera works great if not take the long way...