Database Develop

Help installing TWRP on Xiaomi mi5

Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?

Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
There is a Mi5 flashing tool, but I've never used it.
sent from my Mi5

Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
Use MiUnlock tool to unlock BL
Then flash TWRP through fasboot

otonieru said:
Use MiUnlock tool to unlock BL
Then flash TWRP through fasboot
Click to expand...
Click to collapse
my problem now is i have no idea how to get miui 7 on it. Iknow that all CM based roms will end in a bootloop if i try to flash with that on.
i have tried a number of things, last time i tried i ended up with it not detecting my sim card, so i had to revert back to Miui 8

Citroon said:
my problem now is i have no idea how to get miui 7 on it. Iknow that all CM based roms will end in a bootloop if i try to flash with that on.
i have tried a number of things, last time i tried i ended up with it not detecting my sim card, so i had to revert back to Miui 8
Click to expand...
Click to collapse
Use miflash tool to flash latest stable global miui 8, then flash CM
It will be fine. I went to CM that way

otonieru said:
Use miflash tool to flash latest stable global miui 8, then flash CM
It will be fine. I went to CM that way
Click to expand...
Click to collapse
i guess ill trust you then! =)
i have the latest stable rom with my bootloader unlocked i'll try to flash TWRP now
did you do that with ADB? seems like im a tad unlucky there as well. (i'm not a noob at this, nor a pro)

Citroon said:
i guess ill trust you then! =)
i have the latest stable rom with my bootloader unlocked i'll try to flash TWRP now
did you do that with ADB? seems like im a tad unlucky there as well. (i'm not a noob at this, nor a pro)
Click to expand...
Click to collapse
No, the MIUI need to be flashed through Miflash tool
TWRP through fastboot
And CM through TWRP
No adb at all

otonieru said:
No, the MIUI need to be flashed through Miflash tool
TWRP through fastboot
And CM through TWRP
No adb at all
Click to expand...
Click to collapse
my miflash wont detect my phone :/

Citroon said:
my miflash wont detect my phone :/
Click to expand...
Click to collapse
let me correct that, it wont detect the file

Citroon said:
let me correct that, it wont detect the file
Click to expand...
Click to collapse
What do you mean by that?

marcoly said:
What do you mean by that?
Click to expand...
Click to collapse
in the flash tool it simply says "error could not find the package"

Citroon said:
in the flash tool it simply says "error could not find the package"
Click to expand...
Click to collapse
Could you post screenshot of MiFlash showing path too?

marcoly said:
Could you post screenshot of MiFlash showing path too?
Click to expand...
Click to collapse
This is what it does, it finds my phone
Gyazo link: https://gyazo.com/a68917c96a4e9d6b3aa4da60ae671454
i locate the file, i've tried both in zip and as a normal folder.

Citroon said:
This is what it does, it finds my phone
Gyazo link: https://gyazo.com/a68917c96a4e9d6b3aa4da60ae671454
i locate the file, i've tried both in zip and as a normal folder.
Click to expand...
Click to collapse
this is another problem, when i want to flash TWRP it cant find my device
https://gyazo.com/9ef62b14719dcc9049b7103167921853

Your thread is getting slightly confusing so let's do it step by step.
Is your phone currently unlocked?
To check, put it into fastboot mode manually without adb:
Turn off your device. Then turn on your device again while holding volume down button.
Plug in your device. Use fastboot:
Code:
fastboot oem device-info
Post screenshots.
Reboot your phone. Post a screenshot of your "About phone" settings menu.

Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
I also tried this way.But not miflash tool. I use twrp to flash global stable rom,boot up the rom and flash twrp through fastboot.And then you can flash your favourite rom.

Hi,
sorry to hijack this thread, but i also have problem flashing TWRP.
I have unlocked phone.
I have USB debugging enabled.
I can reboot to fastboot via adb.
I ca flash twrp (twrp-3.0.2-1-gemini.img 25.2M 2016-07-19 18:48:36 EDT).
But when i go to recovery i still see Mi PcSuite thing. No twrp.
What am i doing wrong? IS there some other, more appropriate twrp image?

Svashtar said:
Hi,
sorry to hijack this thread, but i also have problem flashing TWRP.
I have unlocked phone.
I have USB debugging enabled.
I can reboot to fastboot via adb.
I ca flash twrp (twrp-3.0.2-1-gemini.img 25.2M 2016-07-19 18:48:36 EDT).
But when i go to recovery i still see Mi PcSuite thing. No twrp.
What am i doing wrong? IS there some other, more appropriate twrp image?
Click to expand...
Click to collapse
I got mine sorted out, what you are missing is when you are done flashinh you have to type "Fastboot reboot" and then set TWRP to default recovery
hope that helps you out

Same problem for me, when i type "Fastboot reboot", my Mi5 reboot quickly and after when i go to recovery i see also Mi PC Suite....
Do you have a workaround ?
Second question, is it normal that time to send TWRP.img to phone in ADB is only 0,9s ?

http://forum.xda-developers.com/showthread.php?p=69249337
sent from my MI5

Big problems after bootloop

Hi all
Unfortunately, I'm having serious problems with my new Mi8, which arrived yesterday. It arrived with Global ROM and opened Bootloader.
Switch On, set up, data from the Mi6 pulled by NFC, all tutti. the Mi account I have connected here too.
Then I wanted to play the xiaomi.eu. TWRP installed via "Minimal adb and fastboot", installed via TWRP then the xiaomi.eu-ROM (newest). Has also worked. When setting up the point that I can play back via NFC what was not displayed, or I have overlooked him. Okay, again from the beginning, I thought. Have then reset the phone to factory settings to repeat the device.
Then the phone stuck in the bootloop. Again and again the Mi logo appeared and "unlocked", disappeared and came back, disappeared and came back. I did not get into the TWRP anymore, just into the fastboot.
On advice of different users on FB and another forum I should flash the Global ROM again over the MiFlash tool, which I did then also. Unfortunately I carelessly chose "Flash-and-Lock" and closed the boot loader. Unfortunately, this flash did not work and the phone now only starts in recovery mode 3.0
Due to the closed boot loader, it is not possible for me to install TWRP again, to flash another ROM with MiFlashTool. Also, the Unlock tool does not work, because I get the error message that the device is not linked to my account. I have also tried to install a recovery mod on the Xiaomi PC suite, as the bar remains on the PC but at 0%, on the phone remains the image with the pictured Mi8, after I in the recovery menu "Connect with MiAssistent "selected. Otherwise nothing happens.
With the latest version of the PC suite flashing works, but still boots the box in the recovery mode and the red font remains. Another user in the other forum said that I need the CN version, because on the CN device no EU-Rome is allowed. The CN version is rejected by the PC suite not get verified.
What else can I do. Do you have an idea that helps me getting the phone back on track?

This, for me, is the biggest joke of Xiaomi! Many users are getting stuck in this new policy! That does not exist! A total lack of respect for brand lovers. Let the developers figure out how to reverse this.

try CN Dev version, is latest and best,
forget xiaomi.eu rom lol, almost all they do you can do by yourself within minutes, uninstalling few chinese apps and get google works with googleinstaller_v3. and dev rom have root. just suggestion.

I tried the last cn-version, but the pc-suite dont verify this ROM and dont flash it.

Rantanplan12345 said:
I tried the last cn-version, but the pc-suite dont verify this ROM and dont flash it.
Click to expand...
Click to collapse
use mi flasher

This is Mi 8 thread not Mi 6.

​
altvolt74 said:
use mi flasher
Click to expand...
Click to collapse
Miflasher dont work, because the bootloader is locked.

To OP and the issue at hand, have you tried the fastboot image to install chinese stable or developer rom? That should flash and allow you to unlock bootloader again.
To the people whining about this policy of Xiaomi, you are buying a product for a different market. There is nothing wrong with their policy and you should wait for global version of the phone if you want global image with locked bootloader. It's a little like complaining that the chinese MMO you play over vpn doesn't have english menus. Well no, it's not for that market.

Superbia said:
To OP and the issue at hand, have you tried the fastboot image to install chinese stable or developer rom? That should flash and allow you to unlock bootloader again.
Click to expand...
Click to collapse
I tried only the chinese recovery rom for flashing with the pc-suite. The fastboot image, I can only flash with twrp or miflashtool, right? TWRP dont work, I cant boot in it. And miflashtool says, as I tried to flash the global rom, that it isnt allowed to erase a locked device.

Rantanplan12345 said:
I tried only the chinese recovery rom for flashing with the pc-suite. The fastboot image, I can only flash with twrp or miflashtool, right? TWRP dont work, I cant boot in it. And miflashtool says, as I tried to flash the global rom, that it isnt allowed to erase a locked device.
Click to expand...
Click to collapse
Nah, the fastboot image flashes best in my experience if you unpack it, all the way. You will get some folders and .bat files. make sure you have fastboot in either PATH or same directory make sure fastboot detects the image and after that run the flash_all.bat and it should flash it.

​
Superbia said:
Nah, the fastboot image flashes best in my experience if you unpack it, all the way. You will get some folders and .bat files. make sure you have fastboot in either PATH or same directory make sure fastboot detects the image and after that run the flash_all.bat and it should flash it.
Click to expand...
Click to collapse
That dont work, because the bootloader is locked. Fastboot says too, that it isnt allowed because the lock, same when I try to install twrp on the locked phone.

Rantanplan12345 said:
​
That dont work, because the bootloader is locked. Fastboot says too, that it isnt allowed because the lock, same when I try to install twrp on the locked phone.
Click to expand...
Click to collapse
Hmm you tried "fastboot oem unlock" also right?

Yes, I tried. Result in a failef, I remember.
Token verify failed

help please root mi8

hello everyone
Buy a Chinese mi8, unlock it waiting for the days that xiaomi tells you.
I installed the global version, and everything works correctly, but I want to change the rom.
I've tried to install TWRP with adb and it's impossible, it tells me the ADB template that OKEY, but never restarts in recovery mode with TWRP, so I can not install magisk, or any rom that is not official.
Is there any way to install a ROM (.zip) without TWRP?, how do I do Root without magisk? Has it happened to anyone?
thanks!

First of all, you're in the wrong section.
Second you should install via fastboot as described a thousand times AND reboot directly to your TWRP image via fastboot command.
The you can flash another from and root it.
Third, I'd like to strongly advice you to do some research about android, flashing etc to make sure that you know what you are doing.... So many people are moaning about bricked devices....

trahzebuck said:
First of all, you're in the wrong section.
Second you should install via fastboot as described a thousand times AND reboot directly to your TWRP image via fastboot command.
The you can flash another from and root it.
Third, I'd like to strongly advice you to do some research about android, flashing etc to make sure that you know what you are doing.... So many people are moaning about bricked devices....
Click to expand...
Click to collapse
Thanks for your help
It's not the first cell phone I've flashed that you're not smart.
I have followed the steps as they are, and as you can see in the image, everything seems to be installed correctly. But whenever I restart in recovery mode, I get the xiaomi no twrp.
Do you know why?

cheteuk said:
Thanks for your help
It's not the first cell phone I've flashed that you're not smart.
I have followed the steps as they are, and as you can see in the image, everything seems to be installed correctly. But whenever I restart in recovery mode, I get the xiaomi no twrp.
Do you know why?
Click to expand...
Click to collapse
You are trying to be smart? Well...
Why didn't you post your exact steps with fastboot in the first post?
Now it's clear what you did wrong. I already expected it. And you did NOT read what I wrote:
You are rebooting your device with fastboot reboot. In this case your twrp is wiped out by the XIAOMI recovery. Use: fastboot boot yourimagename.
btw, why are you using such an old TWRP? You won't be able to flash actual roms.
So I'd like to come back to my advice in the first answer....

cheteuk said:
Thanks for your help
It's not the first cell phone I've flashed that you're not smart.
I have followed the steps as they are, and as you can see in the image, everything seems to be installed correctly. But whenever I restart in recovery mode, I get the xiaomi no twrp.
Do you know why?
Click to expand...
Click to collapse
fastboot boot recovery.img
not fastboot reboot
Sent from my MI 8 using Tapatalk

Vuska said:
fastboot boot recovery.img
not fastboot reboot
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
I've tried twrp-3.3.1-0-dipper too, and fastboot boot xxxx.img.
And it hasn't been restarted either.

cheteuk said:
I've tried twrp-3.3.1-0-dipper too, and fastboot boot xxxx.img.
And it hasn't been restarted either.
Click to expand...
Click to collapse
Use the all in one tool, to remove encryption and flash a compatible TWRP.

tsongming said:
Use the all in one tool, to remove encryption and flash a compatible TWRP.
Click to expand...
Click to collapse
What is the all in one tool?

cheteuk said:
What is the all in one tool?
Click to expand...
Click to collapse
Try this. There is all you need.
https://tradingshenzhen.com/de/cont...sh-tutorial-global-firmware-xiaomieu-firmware
Upps, in German. You can choose English.

Goalach said:
Try this. There is all you need.
https://tradingshenzhen.com/de/cont...sh-tutorial-global-firmware-xiaomieu-firmware
Upps, in German. You can choose English.
Click to expand...
Click to collapse
Thanks for the help.
But all the steps that indicate, I have passed them and I never install the TWRP correctly.
1. my mobile phone is unlocked (with the padlock open)
2. I have the official rom installed
3. I try to install twrp with all the commands you have told me, and I never restart the mobile with twrp. I've tried new, intermediate and older versions. and nothing
Is there any way to install an unofficial rom without TWRP?

cheteuk said:
Thanks for the help.
But all the steps that indicate, I have passed them and I never install the TWRP correctly.
1. my mobile phone is unlocked (with the padlock open)
2. I have the official rom installed
3. I try to install twrp with all the commands you have told me, and I never restart the mobile with twrp. I've tried new, intermediate and older versions. and nothing
Is there any way to install an unofficial rom without TWRP?
Click to expand...
Click to collapse
You can't flash a ROM without TWRP and Magisk is the only way you can root your phone that I know of. If you don't even know these simple things/haven't done simple research you might risk to softbrick or even hardbrick your new and shiny phone. There are many guides on how to flash TWRP but you can PM me if you want more help.
Also you don't install TWRP with adb, you need to use fastboot...

cheteuk said:
What is the all in one tool?
Click to expand...
Click to collapse
The number 1 result
http://bfy.tw/Nvtb

You can try this
Make sure you have activated the usb debugging in developer options.
1. Download the tools from here: bit.ly/FlashToolMi8
2. Install the minimal_adb_fastboot_v1.3.1_setup
3. Copy the twrp-3.2.3-0-dipper.img to Minimal ADB and Fastboot Folder
4. Turn off your phone completely. then press power button + volume down to boot in fastboot mode.
5. Run CMD as Administrator then cd to the installed Minimal ADB and Fastboot folder. (Ex: cd C:\Program Files (x86)\Minimal ADB and Fastboot)
6. Use this command on your cmd: fastboot flash recovery twrp-3.2.3-0-dipper.img
7. Then: fastboot boot twrp-3.2.3-0-dipper
8. And: fastboot reboot recovery
9. You're now in twrp recovery mode
10. Copy Disable_Dm-Verity_FEC_v1.1 and Magisk-v18.1 to your phone
11. Install Disable_Dm-Verity_FEC_v1.1 from twrp
12. Then install Magisk-v18.1
13. Reboot, Your phone now rooted

[GUIDE] Mega Unbrick Guide for A Hard Bricked OnePlus 7 Pro

Similar to the previous threads for OnePlus 5, OnePlus 5T or OnePlus 6, here are the necessary packages to unbrick/revive a hard bricked OnePlus 7 Pro.
The following hardware revisions are supported:
GM1910: China
GM1911: India
GM1913: Europe
GM1917: Global/US Unlocked
Download: https://www.androidfilehost.com/?w=files&flid=294744
guacamole_21_H.04_190416_unlocked.zip
After using it, the phone will be restored to HydrogenOS aka Chinese firmware.
Click to expand...
Click to collapse
guacamole_21_E.08_190515_unlocked.rar
After using it, the phone will be restored to OxygenOS 9.5.4.GM21BA aka European firmware.
Click to expand...
Click to collapse
guacamole_21_O.07_190512_unlocked.zip
After using it, the phone will be restored to OxygenOS 9.5.3.GM21AA aka global firmware.
Click to expand...
Click to collapse
In every case, it is possible to upgrade to latest OxygenOS by using full signed zip from this thread via Local Upgrade.
With the device powered off, hold Volume Up & Volume Down buttons to force it to boot to Qualcomm download mode.
Use the most updated signed driver (2.1.2.2 at this moment) to avoid potential issues..
For detailed procedures, please consult the linked threads above. There is no reason to repeat the same thing again.
Make sure the path of the extracted files doesn't contain any non-English character. The tool isn't unicode aware.
Source:
HydrogenOS package: 人艱不拆 (OnePlus China forum thread), @trollavin & @Some_Random_Username for the help in mirroring
OxygenOS (EU) package: @MrVoshel
OxygenOS (global) package: @Lucifer6

Reserved for future.

Thank you for this!!

Doesn't this leave you with a Chinese modem (limited LTE bands and roaming configs?) and critical partitions? Wouldn't an international or European tool be more suitable considering that Oxygen zips may not overwrite everything? Or is this just a temporary guide with what we have?

LLStarks said:
Doesn't this leave you with a Chinese modem (limited LTE bands and roaming configs?) and critical partitions? Wouldn't an international or European tool be more suitable considering that Oxygen zips may not overwrite everything? Or is this just a temporary guide with what we have?
Click to expand...
Click to collapse
Temp? yes and no, I would say. Better than warranty R&D in days no phone for use.
As far as you can revive the phone from QDL9008 back to HOS/OOS, you now have a chance Again to switch over whatever ROM or OS you want later on.

jkyoho said:
Temp? yes and no, I would say. Better than warranty R&D in days no phone for use.
As far as you can revive the phone from QDL9008 back to HOS/OOS, you now have a chance Again to switch over whatever ROM or OS you want later on.
Click to expand...
Click to collapse
Well, that's the perfect explanation.
:highfive:

Can you turn TMobile to int'l with this ?

HtcOnekid said:
Can you turn TMobile to int'l with this ?
Click to expand...
Click to collapse
What he said

When i start MsmdownloadtoolV4.0.exe it says :
Packet image not exist!

Take out the Chinese characters in the file name and then try

joemossjr said:
Take out the Chinese characters in the file name and then try
Click to expand...
Click to collapse
Yep that's i though, but i finaly looking for EU version. Because i think with OTA upgrade to GMBA EU modem will not contain the good modem right ?
---------- Post added at 12:59 AM ---------- Previous post was at 12:27 AM ----------
failed to install on EU model : param preprocessing and stop at 5 ou 7 sec before flashing. I tryed using anothere patched tool and not working :s

Please help me, I failed pretty hard and bricked my phone.
I rooted my phone with stock recovery using a patched magisk boot image and all went fine.
Today, I deviced to temporarily boot into twrp to check it out, so I booted into fastboot and used "fastboot boot twrp.img"
and booted into system. I was confused and rebooted but now I was stuck in stock recovery. So I completely flashed TWRP
on boot_a and boot_b and into TWRP I rooted my device. But even now I am always bootlooping into TWRP and can't
get my phone to boot into system.
I tried using the unbrick tool but my device won't show up on my computer, even with the driver installed.
I'm screwed, can someone help?
Can I somehow reflash the stock recovery and revert back to my patched boot image?

uniQ191 said:
Please help me, I failed pretty hard and bricked my phone.
I rooted my phone with stock recovery using a patched magisk boot image and all went fine.
Today, I deviced to temporarily boot into twrp to check it out, so I booted into fastboot and used "fastboot boot twrp.img"
and booted into system. I was confused and rebooted but now I was stuck in stock recovery. So I completely flashed TWRP
on boot_a and boot_b and into TWRP I rooted my device. But even now I am always bootlooping into TWRP and can't
get my phone to boot into system.
I tried using the unbrick tool but my device won't show up on my computer, even with the driver installed.
I'm screwed, can someone help?
Can I somehow reflash the stock recovery and revert back to my patched boot image?
Click to expand...
Click to collapse
what is your device OOS 9.5.3/4/5/6 ?
flash the co-responding stock boot.img from twrp with magisk zip together, and see if you can boot

uniQ191 said:
Please help me, I failed pretty hard and bricked my phone.
I rooted my phone with stock recovery using a patched magisk boot image and all went fine.
Today, I deviced to temporarily boot into twrp to check it out, so I booted into fastboot and used "fastboot boot twrp.img"
and booted into system. I was confused and rebooted but now I was stuck in stock recovery. So I completely flashed TWRP
on boot_a and boot_b and into TWRP I rooted my device. But even now I am always bootlooping into TWRP and can't
get my phone to boot into system.
I tried using the unbrick tool but my device won't show up on my computer, even with the driver installed.
I'm screwed, can someone help?
Can I somehow reflash the stock recovery and revert back to my patched boot image?
Click to expand...
Click to collapse
You havn't bricked your phone, just put it in fastboot mode and reupload boot image to the correct slot !
Regards,

thebigtross said:
You havn't bricked your phone, just put it in fastboot mode and reupload boot image to the correct slot !
Regards,
Click to expand...
Click to collapse
Thanks for your replies! I was on OOS 9.5.5 and I tried flashing the twrp/magisk zips but that didn't work either. I also tried applying the stock boot.img to the active slot, but still got the recovery bootloop.
So as my last hope, I wiped all data in recovery mode, rebooted to fastboot and sideloaded the complete stock image from here https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
I reconfigured my phone from scratch, rooted with the patched boot image like before and everythings works now. Guess I will not bother with TWRP any time soon.

Added global and EU packages.

Titokhan said:
Added global and EU packages.
Click to expand...
Click to collapse
Will global work for 1911 (India)

Mr.Crucial said:
Will global work for 1911 (India)
Click to expand...
Click to collapse
Yes, the packages are interchangable.

[/COLOR]
Titokhan said:
Yes, the packages are interchangable.
Click to expand...
Click to collapse
But I think that these packages will not work on T-mobile 1915!

When I reboot into edl mode, it recognizes the "Qualcomm HS-USB QDLoader 9008", but then 10 seconds later, the phone automatically boots the the battery display, which disables edl. The same this happens whether I use the vol up+down and plug in, or `adb reboot edl`.
Edit: "How I learned to stop worrying and risk a brick"
Selecting the right COM and hitting start in MSMtool in that 10 second window kept it in edl mode for the duration of the flash.

MiFlash error: "Flash vendor_ab error"

My first post, after some modding (and soft bricking too:silly My recovery doesn't work anymore (Touch not working, twrp 3.1.1-1) I want to flash stock miui 11 global with miFlash but it gives me the Flash vendor_ab error. What I have to do? or maybe u have a method to solve my recovery. Fastboot works, bootloader unlocked. Let me know if u need logs. Thanks, at the moment I have no working phone.

xD_Lol said:
My first post, after some modding (and soft bricking too:silly My recovery doesn't work anymore (Touch not working, twrp 3.1.1-1) I want to flash stock miui 11 global with miFlash but it gives me the Flash vendor_ab error. What I have to do? or maybe u have a method to solve my recovery. Fastboot works, bootloader unlocked. Let me know if u need logs. Thanks, at the moment I have no working phone.
Click to expand...
Click to collapse
Hey brother @tsongming May be you can help him
[emoji1191]

xD_Lol said:
My first post, after some modding (and soft bricking too:silly My recovery doesn't work anymore (Touch not working, twrp 3.1.1-1) I want to flash stock miui 11 global with miFlash but it gives me the Flash vendor_ab error. What I have to do? or maybe u have a method to solve my recovery. Fastboot works, bootloader unlocked. Let me know if u need logs. Thanks, at the moment I have no working phone.
Click to expand...
Click to collapse
Be sure that you are using Fastboot rom , and not a recovery rom.
Make sure that your ADB and drivers are up to date, and finally you may be experiencing the driver issue issue that a lot of people with Ryzen processors experience. I had the same issue on my Intel neon processors. This can be fixed by flash the batch file from here : https://forum.xda-developers.com/showpost.php?p=82607121&postcount=25
Unpack the fastboot file twice on your desktop and then combined with the batch file it should flash.