Related
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
There is a Mi5 flashing tool, but I've never used it.
sent from my Mi5
Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
Use MiUnlock tool to unlock BL
Then flash TWRP through fasboot
otonieru said:
Use MiUnlock tool to unlock BL
Then flash TWRP through fasboot
Click to expand...
Click to collapse
my problem now is i have no idea how to get miui 7 on it. Iknow that all CM based roms will end in a bootloop if i try to flash with that on.
i have tried a number of things, last time i tried i ended up with it not detecting my sim card, so i had to revert back to Miui 8
Citroon said:
my problem now is i have no idea how to get miui 7 on it. Iknow that all CM based roms will end in a bootloop if i try to flash with that on.
i have tried a number of things, last time i tried i ended up with it not detecting my sim card, so i had to revert back to Miui 8
Click to expand...
Click to collapse
Use miflash tool to flash latest stable global miui 8, then flash CM
It will be fine. I went to CM that way
otonieru said:
Use miflash tool to flash latest stable global miui 8, then flash CM
It will be fine. I went to CM that way
Click to expand...
Click to collapse
i guess ill trust you then! =)
i have the latest stable rom with my bootloader unlocked i'll try to flash TWRP now
did you do that with ADB? seems like im a tad unlucky there as well. (i'm not a noob at this, nor a pro)
Citroon said:
i guess ill trust you then! =)
i have the latest stable rom with my bootloader unlocked i'll try to flash TWRP now
did you do that with ADB? seems like im a tad unlucky there as well. (i'm not a noob at this, nor a pro)
Click to expand...
Click to collapse
No, the MIUI need to be flashed through Miflash tool
TWRP through fastboot
And CM through TWRP
No adb at all
otonieru said:
No, the MIUI need to be flashed through Miflash tool
TWRP through fastboot
And CM through TWRP
No adb at all
Click to expand...
Click to collapse
my miflash wont detect my phone :/
Citroon said:
my miflash wont detect my phone :/
Click to expand...
Click to collapse
let me correct that, it wont detect the file
Citroon said:
let me correct that, it wont detect the file
Click to expand...
Click to collapse
What do you mean by that?
marcoly said:
What do you mean by that?
Click to expand...
Click to collapse
in the flash tool it simply says "error could not find the package"
Citroon said:
in the flash tool it simply says "error could not find the package"
Click to expand...
Click to collapse
Could you post screenshot of MiFlash showing path too?
marcoly said:
Could you post screenshot of MiFlash showing path too?
Click to expand...
Click to collapse
This is what it does, it finds my phone
Gyazo link: https://gyazo.com/a68917c96a4e9d6b3aa4da60ae671454
i locate the file, i've tried both in zip and as a normal folder.
Citroon said:
This is what it does, it finds my phone
Gyazo link: https://gyazo.com/a68917c96a4e9d6b3aa4da60ae671454
i locate the file, i've tried both in zip and as a normal folder.
Click to expand...
Click to collapse
this is another problem, when i want to flash TWRP it cant find my device
https://gyazo.com/9ef62b14719dcc9049b7103167921853
Your thread is getting slightly confusing so let's do it step by step.
Is your phone currently unlocked?
To check, put it into fastboot mode manually without adb:
Turn off your device. Then turn on your device again while holding volume down button.
Plug in your device. Use fastboot:
Code:
fastboot oem device-info
Post screenshots.
Reboot your phone. Post a screenshot of your "About phone" settings menu.
Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
I also tried this way.But not miflash tool. I use twrp to flash global stable rom,boot up the rom and flash twrp through fastboot.And then you can flash your favourite rom.
Hi,
sorry to hijack this thread, but i also have problem flashing TWRP.
I have unlocked phone.
I have USB debugging enabled.
I can reboot to fastboot via adb.
I ca flash twrp (twrp-3.0.2-1-gemini.img 25.2M 2016-07-19 18:48:36 EDT).
But when i go to recovery i still see Mi PcSuite thing. No twrp.
What am i doing wrong? IS there some other, more appropriate twrp image?
Svashtar said:
Hi,
sorry to hijack this thread, but i also have problem flashing TWRP.
I have unlocked phone.
I have USB debugging enabled.
I can reboot to fastboot via adb.
I ca flash twrp (twrp-3.0.2-1-gemini.img 25.2M 2016-07-19 18:48:36 EDT).
But when i go to recovery i still see Mi PcSuite thing. No twrp.
What am i doing wrong? IS there some other, more appropriate twrp image?
Click to expand...
Click to collapse
I got mine sorted out, what you are missing is when you are done flashinh you have to type "Fastboot reboot" and then set TWRP to default recovery
hope that helps you out
Same problem for me, when i type "Fastboot reboot", my Mi5 reboot quickly and after when i go to recovery i see also Mi PC Suite....
Do you have a workaround ?
Second question, is it normal that time to send TWRP.img to phone in ADB is only 0,9s ?
http://forum.xda-developers.com/showthread.php?p=69249337
sent from my MI5
Hi all
Unfortunately, I'm having serious problems with my new Mi8, which arrived yesterday. It arrived with Global ROM and opened Bootloader.
Switch On, set up, data from the Mi6 pulled by NFC, all tutti. the Mi account I have connected here too.
Then I wanted to play the xiaomi.eu. TWRP installed via "Minimal adb and fastboot", installed via TWRP then the xiaomi.eu-ROM (newest). Has also worked. When setting up the point that I can play back via NFC what was not displayed, or I have overlooked him. Okay, again from the beginning, I thought. Have then reset the phone to factory settings to repeat the device.
Then the phone stuck in the bootloop. Again and again the Mi logo appeared and "unlocked", disappeared and came back, disappeared and came back. I did not get into the TWRP anymore, just into the fastboot.
On advice of different users on FB and another forum I should flash the Global ROM again over the MiFlash tool, which I did then also. Unfortunately I carelessly chose "Flash-and-Lock" and closed the boot loader. Unfortunately, this flash did not work and the phone now only starts in recovery mode 3.0
Due to the closed boot loader, it is not possible for me to install TWRP again, to flash another ROM with MiFlashTool. Also, the Unlock tool does not work, because I get the error message that the device is not linked to my account. I have also tried to install a recovery mod on the Xiaomi PC suite, as the bar remains on the PC but at 0%, on the phone remains the image with the pictured Mi8, after I in the recovery menu "Connect with MiAssistent "selected. Otherwise nothing happens.
With the latest version of the PC suite flashing works, but still boots the box in the recovery mode and the red font remains. Another user in the other forum said that I need the CN version, because on the CN device no EU-Rome is allowed. The CN version is rejected by the PC suite not get verified.
What else can I do. Do you have an idea that helps me getting the phone back on track?
This, for me, is the biggest joke of Xiaomi! Many users are getting stuck in this new policy! That does not exist! A total lack of respect for brand lovers. Let the developers figure out how to reverse this.
try CN Dev version, is latest and best,
forget xiaomi.eu rom lol, almost all they do you can do by yourself within minutes, uninstalling few chinese apps and get google works with googleinstaller_v3. and dev rom have root. just suggestion.
I tried the last cn-version, but the pc-suite dont verify this ROM and dont flash it.
Rantanplan12345 said:
I tried the last cn-version, but the pc-suite dont verify this ROM and dont flash it.
Click to expand...
Click to collapse
use mi flasher
This is Mi 8 thread not Mi 6.
altvolt74 said:
use mi flasher
Click to expand...
Click to collapse
Miflasher dont work, because the bootloader is locked.
To OP and the issue at hand, have you tried the fastboot image to install chinese stable or developer rom? That should flash and allow you to unlock bootloader again.
To the people whining about this policy of Xiaomi, you are buying a product for a different market. There is nothing wrong with their policy and you should wait for global version of the phone if you want global image with locked bootloader. It's a little like complaining that the chinese MMO you play over vpn doesn't have english menus. Well no, it's not for that market.
Superbia said:
To OP and the issue at hand, have you tried the fastboot image to install chinese stable or developer rom? That should flash and allow you to unlock bootloader again.
Click to expand...
Click to collapse
I tried only the chinese recovery rom for flashing with the pc-suite. The fastboot image, I can only flash with twrp or miflashtool, right? TWRP dont work, I cant boot in it. And miflashtool says, as I tried to flash the global rom, that it isnt allowed to erase a locked device.
Rantanplan12345 said:
I tried only the chinese recovery rom for flashing with the pc-suite. The fastboot image, I can only flash with twrp or miflashtool, right? TWRP dont work, I cant boot in it. And miflashtool says, as I tried to flash the global rom, that it isnt allowed to erase a locked device.
Click to expand...
Click to collapse
Nah, the fastboot image flashes best in my experience if you unpack it, all the way. You will get some folders and .bat files. make sure you have fastboot in either PATH or same directory make sure fastboot detects the image and after that run the flash_all.bat and it should flash it.
Superbia said:
Nah, the fastboot image flashes best in my experience if you unpack it, all the way. You will get some folders and .bat files. make sure you have fastboot in either PATH or same directory make sure fastboot detects the image and after that run the flash_all.bat and it should flash it.
Click to expand...
Click to collapse
That dont work, because the bootloader is locked. Fastboot says too, that it isnt allowed because the lock, same when I try to install twrp on the locked phone.
Rantanplan12345 said:
That dont work, because the bootloader is locked. Fastboot says too, that it isnt allowed because the lock, same when I try to install twrp on the locked phone.
Click to expand...
Click to collapse
Hmm you tried "fastboot oem unlock" also right?
Yes, I tried. Result in a failef, I remember.
Token verify failed
Hello all, i unlocked the bootloader on the xiaomi mi A2 , and i was trying to follow this guide :https://forum.xda-developers.com/mi-a2/how-to/tutorial-camera2api-gcam-root-t3842475 to install the gmcam, but after the point 5. i just rebooted the phone from the recovery, just cause i wanted to try it, after that is stucked in android 8.1 animation, but i have access to the recovery (even if the tool shouldnt have installed it), but dunno what can i do from the recovery, and the device can go in fastboot mode but is not recognized by adb, what can i do?
What version of software was your Mi A2, if it was V9.6.13.0.ODIMIFE, then download the full stock ROM from here
http://en.miui.com/download-353.html
In fastboot mode, adb is not working, fastboot commands works there.
Extract boot.img from images of downloaded ROM.
Put the boot.img in adb folder.
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot reboot
it should start normally
If not, then flash every image like in this post.
https://forum.xda-developers.com/showpost.php?p=77302899&postcount=4
minnuss said:
What version of software was your Mi A2, if it was V9.6.13.0.ODIMIFE, then download the full stock ROM from here
http://en.miui.com/download-353.html
In fastboot mode, adb is not working, fastboot commands works there.
Extract boot.img from images of downloaded ROM.
Put the boot.img in adb folder.
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot reboot
it should start normally
If not, then flash every image like in this post.
https://forum.xda-developers.com/showpost.php?p=77302899&postcount=4
Click to expand...
Click to collapse
Thanks for the help, but, I don't know why, ADB driver were not working properly, didnt recognize the phone so I couldnt follow this guide, and i couldnt switch off the phone either, it was stuck in bootloop, the only thing I was able to do is to put the device in fastboot mode using the button combination..
Luckly the Mi Flash tool was able to recognize the device so I flashed the stock rom with that and now everything is back to normal, I've just a question, the phone sais that the bootloader is still unlocked, is that true? Even if I've flashed from zero the stock rom?
fuffy841 said:
Thanks for the help, but, I don't know why, ADB driver were not working properly, didnt recognize the phone so I couldnt follow this guide, and i couldnt switch off the phone either, it was stuck in bootloop, the only thing I was able to do is to put the device in fastboot mode using the button combination..
Luckly the Mi Flash tool was able to recognize the device so I flashed the stock rom with that and now everything is back to normal, I've just a question, the phone sais that the bootloader is still unlocked, is that true? Even if I've flashed from zero the stock rom?
Click to expand...
Click to collapse
Yep, it's true. You have to relock the bootloader, but this cause full wipe. IMO there's no need to relock the bootloader if you not enable the usb dev mode.
Also, theres an option in mi flash tool to lock the bootloader after flash. Something like flash_all_lock
DO NOT use flash_all_lock_crc. This will cause dead wifi and Bluetooth modem.
I am stuck on the exact same issue. Can you explain in detail all the steps you followed.
Mine was updated to September patch and it is Indian variant.
---------- Post added at 06:16 PM ---------- Previous post was at 05:31 PM ----------
rt1279_isBITW said:
I am stuck on the exact same issue. Can you explain in detail all the steps you followed.
Mine was updated to September patch and it is Indian variant.
Click to expand...
Click to collapse
Nvm I was able to flash that rom but now after the phone locks once the touch is gone until I reboot the device.
Are there any hardware differences in my indian variant or did I just flash it wrong?
I used flash_all.bat and clean all option.
Daniesz said:
Yep, it's true. You have to relock the bootloader, but this cause full wipe. IMO there's no need to relock the bootloader if you not enable the usb dev mode.
Also, theres an option in mi flash tool to lock the bootloader after flash. Something like flash_all_lock
DO NOT use flash_all_lock_crc. This will cause dead wifi and Bluetooth modem.
Click to expand...
Click to collapse
Nono i want to keep the bootloader unlocked, that's why I asked ! Thanks man.
Nvm I was able to flash that rom but now after the phone locks once the touch is gone until I reboot the device.
Are there any hardware differences in my indian variant or did I just flash it wrong?
I used flash_all.bat and clean all option
Click to expand...
Click to collapse
I used the same option, cause it didnt work with the other ones.. I didnt have any issue so far tho, and I dont know about hardware differences, but I dont think a bad flash can cause this kind of problem, not sure tho. Maybe now that everything is working try to flash again a stock rom.
Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
forget this..i've got ROOT check the other thread !
How do you fix it?
simika said:
forget this..i've got ROOT check the other thread !
Click to expand...
Click to collapse
How did you managed to fix this?
by reading lol.. check the other thread all written
For reference to whoever that are confused about where to look for the solution.
ROOT GAINED !!!!
THIS METHOD WORKS on both: POCO M3 Pro / Redmi Note 10 5G hey guys.. wonderful news.. been trying here and there and IT WORKS FINALLY i gained root of POCO m3 Pro 5G ! i'll write in steps how it works and post all files i've been using...
forum.xda-developers.com
Download the vbmeta and flash it via fastboot to get rid of the dm-verify.
simika said:
by reading lol.. check the other thread all written
Click to expand...
Click to collapse
Could you reference a link or give me a little how to?
I tried a lot now:
- Installed a new Firmware trough Fastboot
- Using MsmDownload Tool
nothing helped so far.
So it would be great if you could assist in any way.
simika said:
Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
Click to expand...
Click to collapse
I done everything but my phone doesn't unlock so now I have the dm-verity warning and I can't do a clean flash with Miflash. Also Miflash Unlock doesn't work. What I can do now?
if you can enter in fastboot mode, reflash stock boot and vbmeta
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
How can I do? Miflash says:
error:Writing 'crclist' FAILED (remote: 'not allowed in locked state')
bro you have relock bootloader, this is a fatal error. the only way is try to unlock with an mtk tool that do this via pc. you can find on internet. search unlock all mtk devices. i think there a link also on xda
Just realized that the M3 thread, my phone is a M4.
.
@simika how are you sending this question?
1. Hello friends, there are two ways to fix this problem, first you need Root, I read your Root tutorial, your tutorial is very good, and after using Root, you need to download any file manager, give Root Permissions, you need to backup your baseband, nvram nvdata nvcfg backup and save, you also need an MTK Bypass, you can search for MTK Auth Bypass Tool through Google, you also need to use SP Flash to flash the machine, you need to download the official firmware package, which can be downloaded from xiaomirom.com , download the corresponding version, use SP Flash to read your firmware package, after the reading is completed, choose to format all and download, wait for completion, press the power button after completion, you will find that the error has disappeared, but the baseband is lost, But you have backed up. Boot through fastboot to unlock the BL lock, perform fastboot flash nvram ....... fastboot flash nvdata ....... fastboot flash nvcfg ....... Fastboot reboot reboot. Congratulations The baseband is back, I'm a novice, my instructions are not comprehensive, such as where is the baseband location, but I have too many characters, I will list the baseband location. 2. Replace a new motherboard, all mobile phone problems are all solve.
Hope to help you.
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
Thanks. This worked on my Umidigi A11 phone.
xdadev_user11 said:
Thanks. This worked on my Umidigi A11 phone.
Click to expand...
Click to collapse
nice!
hello i got the same problem today, my phone is redmi9a can some help me regarding to this error ?
i had this problem even though i never unlocked my bootloader so i couldnt flash anything to fix it. but when i got the miui 13 update it fixed it for me
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
What if you cant enter fastboot?
Hello, i have a redmi note 9,
I was using lineage OS from here https://t.me/HelioG85_Updates/265
Custom firmware, custom opensource vendor
I wasnt able to boot into the recovery today for some reason, i was using the recovery from here https://t.me/HelioG85_Updates/268
In a moment of genius, i decided to get this app https://play.google.com/store/apps/details?id=net.mxbi.reboot and used it to boot to the recovery , now my device is bricked, doesnt enter fastboot or the recovery , and i cant turn the device of meaning i cant flash with sp flash tool
My bootloader is unlocked. i do not have a xiaomi account anymore
I have my imei and nvdata backed up, so i should be fine on that regard
Please do help me, This is the only phone i have and i cannot get a another one . If you help me i will be forever greatfull to you, Please help me i am desperate
Ifuckinghatemyselfandall said:
Hello, i have a redmi note 9,
I was using lineage OS from here https://t.me/HelioG85_Updates/265
Custom firmware, custom opensource vendor
I wasnt able to boot into the recovery today for some reason, i was using the recovery from here https://t.me/HelioG85_Updates/268
In a moment of genius, i decided to get this app https://play.google.com/store/apps/details?id=net.mxbi.reboot and used it to boot to the recovery , now my device is bricked, doesnt enter fastboot or the recovery , and i cant turn the device of meaning i cant flash with sp flash tool
My bootloader is unlocked. i do not have a xiaomi account anymore
I have my imei and nvdata backed up, so i should be fine on that regard
Please do help me, This is the only phone i have and i cannot get a another one . If you help me i will be forever greatfull to you, Please help me i am desperate
Click to expand...
Click to collapse
So sp flash tool will lock your phone to engineer mode if it turns off follow this instruction:
prepare sp flash tools to only flash recovery (the one you want to boot into)
then click the download button to start flash
then wait for phone to get to boot( when image appears, before it gets to reboot plugin your phone to pc)
sp flash tools will flash then when done make sure you reboot to the custom recovery
then if you can access your system from recovery , look next to build.rop for recovery or rebootfromrecovery.p
copy the file somewhere
edit in notepad to clear everything, save it then use the edited one to overwrite
flairepathos.info said:
So sp flash tool will lock your phone to engineer mode if it turns off follow this instruction:
prepare sp flash tools to only flash recovery (the one you want to boot into)
then click the download button to start flash
then wait for phone to get to boot( when image appears, before it gets to reboot plugin your phone to pc)
sp flash tools will flash then when done make sure you reboot to the custom recovery
then if you can access your system from recovery , look next to build.rop for recovery or rebootfromrecovery.p
copy the file somewhere
edit in notepad to clear everything, save it then use the edited one to overwrite
Click to expand...
Click to collapse
I am going to try the mtk bypass tool, is that going to work? if not i am going to try your instructions, however it did not boot into the recovery even after reflashing , i have tried that before with the twrp app
It cannot detect the device, it isnt in device manager either, i am getting scared
edit: actually it gets detected in device manager as "usb serial device (com4)" when i hold the power button, volume up and volume down at the same time, when i do that, the device stays with a black screen
SP flash tool still does not detect it
it seems to be disconnecting while in this state
Please help, i cant turn the device off
sp flash tool says STATUS_EXT_RAM_EXCEPTION i was trying to flash miui 12.5 R i will try flashing 12.0.5 q since thats what people are using
Ifuckinghatemyselfandall said:
sp flash tool says STATUS_EXT_RAM_EXCEPTION i was trying to flash miui 12.5 R i will try flashing 12.0.5 q since thats what people are using
Click to expand...
Click to collapse
You need to flash the SAME miui version present on the device first.
VD171 said:
You need to flash the SAME miui version present on the device first.
Click to expand...
Click to collapse
But i do not know which version was present before, i was using a custom rom when it bricked...
I do think it was running 12.0.6 EEA Q
i am trying to flash miui 12.0.5 global, will that be okay?
It is now giving me "error status error" please help
Ifuckinghatemyselfandall said:
But i do not know which version was present before, i was using a custom rom when it bricked...
I do think it was running 12.0.6 EEA Q
i am trying to flash miui 12.0.5 global, will that be okay?
Click to expand...
Click to collapse
Certainly, mixing files from different miui versions, bricked your device.
You need to flash the correct miui version to fix the partition table.
And then, you can flash another miui version using fastboot.
VD171 said:
Certainly, mixing files from different miui versions, bricked your device.
You need to flash the correct miui version to fix the partition table.
And then, you can flash another miui version using fastboot.
Click to expand...
Click to collapse
No, this is not waht bricked my device, i rebooted to a custom recovery while on a custom rom and thats when it happened
Ifuckinghatemyselfandall said:
No, this is not waht bricked my device, i rebooted to a custom recovery while on a custom rom and thats when it happened
Click to expand...
Click to collapse
Custom recovery will never brick a device.
VD171 said:
Custom recovery will never brick a device.
Click to expand...
Click to collapse
You dont seem to understand what i am saying, It does not if you disable boot verification, which i did , please reread the post
Ilovethewholeworldbutme said:
You dont seem to understand what i am saying, It does not if you disable boot verification, which i did , please reread the post
Click to expand...
Click to collapse
Just flash the full stock miui again.