Database Develop

PC does not recognise phone [device descriptor request failed]

So the story is that i got a samsung galaxy note 5 (n920i) with a broken screen from my sister and it worked fine before. A year later i fixed the phone and wiped the files, cache and stuff i noticed that it did not charge with my aftermarket charging cable (battery was at 0%). I thought the cable was screwed so i used an official samsung one and it started charging. once it started up i did all the startup installation process and such but then i noticed that it would not use fast charge (i have an official samsung fast charge socket) even with the fast charge setting on. so i thought to plug it into my pc but it does not recognise it at all. (device descriptor request failed every time) I used many different ports on my pc and laptop, used many aftermarket and official charging cables, i even used it on devices like the gear vr and a docking station and they dont recognise it either.
I found a post saying to push up the tongue in the charging port which did not fix it, i tried all such drivers and fixes thinking its my pc and/or laptop but no luck, like i said i even used devices like docking station and gear vr and both dont recognise it either. So i just thought it may be the charging port its self and purchased a new one to install(i also got a new battery just incase) . After replacing both the charging dock and the battery successfully it still does not work on my pc nor does it charge properly. it is running on the newest update out right now.
edit: I also lost the little white signal cable for the antenna while replacing charge port but i have purchased a new one and its on the way. (if that causes an issue)
I have tried using samsung kies and smart switch with drivers and it does not recognise it either
I dont know what else to do can someone help me figure it out whats wrong.
Thanks

I have the same problem.

Is there any way to root note 5 n920v without pc?
My phone have a problem that does not connect to pc with usb cable, my last hope is to try to install a new firmware.
By research, i think its a software problem.

arturroch said:
Is there any way to root note 5 n920v without pc?
My phone have a problem that does not connect to pc with usb cable, my last hope is to try to install a new firmware.
By research, i think its a software problem.
Click to expand...
Click to collapse
Thats exactly what i think but i dont know how to flash it without a pc

i have same problem...
problem usb unable to recognized
currently my note 5 no os installed, i try flash stock rom using odin but usb not recognized. i also try pendrive otg also unable to detect the pendrive

After Update to Pie Mobile Phone crasht by during connecting car

Hello, everybody
Before I did the update to Android 9 on my Huawei P20 Pro, AA worked fine in combination with the Opel Intellink. Unfortunately, this has changed to a disadvantage since the update. As soon as I connect my mobile phone with the USB cable, the system asks me which USB option I want. So far so good.
But now it comes: As soon as I activate "Android Auto" in the Intellilink 4.0 settings, my phone crashes and tries to reboot. I already tried everything possible:
- other cable
- AA de- and newly installed
- Bluetooth newly paired
- USB debugging enabled (developer mode enabled)
- USB option set to MTP
- Wipe Cache partition performed
nothing helps.
Even if I don't have AA installed it crashes.
Does anyone have this phenomenon too?
Without activation this is not a problem. Bluetooth also works here.
Many thanks in advance for any suggestions or solutions.
Greetings Finrok

Me too - solution please?
Same here. Working just fine before the update. Now whenever I connect the phone to the car via USB it crashed and reboots. Tried the same as above but I can't see a solution.. I've managed to get it working since by uninstalling and unpairing the device. Plugging it in and reconnecting. But as soon as I unplug and go again next time it crashes again and reboots as before.
Not an issue with the cable, cache or Bluetooth.
May also be worth noting, I also have a p20 pro. Brand new in November
Has anyone figured it out? Please!

Was it OTA update or one of the methods from the forum (eRocovery, OTG)?
Is factory reset an option for you?

Moto X4, p4 XT1900-1, G-Fi variant: USB issues, what custom ROM?

Hello, all, I looked on various forums and it looks like the Stock firmware of this the phone I have (see specs in the title) has issues with USB devices plugged to the phone. I have a USB-C FLIR ONE camera that is normally compatible with the X4. It however does not get recognized when plugged into the charging USB port of the phone. The camera is working (brand new) on my wife's phone (Alcatel IDOL 5S). I tried USB debugging and USB by default checked for file transfer with no luck. Most of the menu in the USB preference is grayed. The phone does USB connect fine to my PC and I can exchange files fine .
I desperately hard reset the phone and even with a fresh stock, it still is not working with my FLIR ONE camera. I then unlocked the bootloader and tried OREO 8 to find out that the camera would work, but then I have no wifi and no cell service. I tried loading Havoc OS and I did not have cell or wifi either.
Do you guys have a solution? My phone is now rooted and I run the stock Payton firmware. Still is no go for my camera but at least I have cell and wifi, but lost a lot of time in the making. If there is rom that would work on my phone and that has no issues with USB, then I take it. I heard that LineageOS 16.0 should work on my phone?
Thanks for helping. This is a really frustrating situation but I have seen on other forums that I am not alone.
Cheers to all.
Hydro.

USB connection to PC not working

I recently purchased a refurbished Mi A2. Today i tried to connect the phone via USB to my PC (tried Win10, Manjaro & Ubuntu) which did not work. While I can charge the phone it is not recognized as a storage device. When looking at the USB configuration in the developer options all the "use usb for" options are greyed out.
It runs Android 10 with the Dec 2020 security update. Since I already tried pretty much every solution recommended in other threads I was wondering if it is an issue with the current android version or if the charging port (which should be new after refurbishment) has to be replaced.
I would appreciate any input or help. Many thanks!

Android Auto in a toyota yaris

I'm trying to use Android Auto with my toyota yaris and my oneplus 9 pro. But whenever I plug in the usb c cable nothing happens. The phone only starts to charge. I have tried to delete the cache and storage of the app, reinstall android auto, reboot and changing the default usb configuration in developer settings of my phone. But nothing happens, my girlfriend can use android auto in the car with her galaxy s21+ with the same cable. So it does not seem to be the car or the cable.
Does anyone has any recommendations to fix this?
Android version: 12
Oxygen OS: 12.1
Build number: LE2123_11_C.61
Android Auto version: 7.8.622514-release
Thanks

2019's and below don't have Android Auto. Only 2020+
This is same issue with our Corolla Hatchbacks. 2019 only had Apple CarPlay & only swapping Headunits from a newer year was the solution to getting Android Auto.

AktionCat said:
2019's and below don't have Android Auto. Only 2020+
This is same issue with our Corolla Hatchbacks. 2019 only had Apple CarPlay & only swapping Headunits from a newer year was the solution to getting Android Auto.
Click to expand...
Click to collapse
My model does have Android Auto since it's from 2021.

drumstick3 said:
My model does have Android Auto since it's from 2021.
Click to expand...
Click to collapse
If someone elses phone is working it's a setting on your phone. Changing the cable wouldn't hurt to try.

Could be corrosion on the phones usb port. Try seeing if you can access files on your phone with a PC. I had same problem (different toyota) and realized even on PC i couldnt access files despite charging still working and using brand new cable. Soaking the port with isopropyl and cleaning it fixed the problem.