View attachment 4603992
View attachment 4604003This has lived in a case since day one, I work in an office wtf is the rear made from
I've heard that sometimes small bits of sand (or whatever) can get trapped between a phone case and the phone.
bonerp said:
View attachment 4603992
View attachment 4604003This has lived in a case since day one, I work in an office wtf is the rear made from
Click to expand...
Click to collapse
It's made from butter. Joking aside I remember my note 8 when brand new after day two in a case there was a scratch on the back. Ever since that moment , I've used back film protection as well. It just takes a grand of sand to get lodged inside the case to do a lot of damage.
Also what case ? Some cases are better at trapping the grain of sand and preventing it from moving around than others.
Sent from my SM-N960U1 using Tapatalk
Limeybastard said:
It's made from butter. Joking aside I remember my note 8 when brand new after day two in a case there was a scratch on the back. Ever since that moment , I've used back film protection as well. It just takes a grand of sand to get lodged inside the case to do a lot of damage.
Also what case ? Some cases are better at trapping the grain of sand and preventing it from moving around than others.
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
Spigen la manon.
Made of chocolate.
Yeaup small particles can get sandwiched in the case but it seems odd it would be a long scratch if that was the case.
That's why I either do a clear slick wraps or throw on a debrand.
Phones in cases got those a lot easier than naked. Small debriefs enters the case and starts to scratch the sides/back.
Yeah.. Tell me a phone with glass back and a Case on not getting hairline scratches and dotted "spots" on the back !
Being cautious and have been using plastic protectors there since "glass era".
This is why I purchased a case AND DBrand skin for it. All my phones have gotten scratches on the back from dust and grit getting under the case. Trying real hard to keep this one pristine.
That is why I like Samsung OEM cases for the N9. They line the inside of them with material to decrease the chance of these blunders.
bonerp said:
This has lived in a case since day one, I work in an office wtf is the rear made from
Click to expand...
Click to collapse
Something softer than sand it appears.
my note 8 still is scratch free after riding in a UAG case since launch...hoping to get my Note 9 tomorrow or Thursday...just couldn't bring myself to pay 1250 at launch this year after having new Note every year since GN3 on launch day or before with early shipping. Managed to acquire one on swappa for $850(512GB) so it was worth the wait if it's as described
are these glass backs or some poly type plastic? I wonder whether a session with poly watch might help.
bonerp said:
are these glass backs or some poly type plastic? I wonder whether a session with poly watch might help.
Click to expand...
Click to collapse
Glass back. A good was or oleophobic coating might help with some scratches. Definitely not going to help with sand getting in between case and phone though.
bonerp said:
are these glass backs or some poly type plastic? I wonder whether a session with poly watch might help.
Click to expand...
Click to collapse
Hey, reviving an old thread. Did you find any fix? I have not one, but 2 medium and 1 small scratch on my back and I used Displex but didnt change anything (I mean really nothing). Any other suggestion? I would try a magic pen for cars and then apply dbrand skin. I so ****ing hate how weak is the rear glass
azZA_09 said:
Hey, reviving an old thread. Did you find any fix? I have not one, but 2 medium and 1 small scratch on my back and I used Displex but didnt change anything (I mean really nothing). Any other suggestion? I would try a magic pen for cars and then apply dbrand skin. I so ****ing hate how weak is the rear glass
Click to expand...
Click to collapse
There is no fix. Just prevention. All mentioned above.
Sent from my SM-N960U1 using Tapatalk
Limeybastard said:
There is no fix. Just prevention. All mentioned above.
Click to expand...
Click to collapse
Yea, but I had a HTC 10 before, full metal. Never had a rear glass
Sand/dust will always cause scratches on glass. Only way around it is to put a protective skin on the back. Even if it's a tight case, the device will shift and particles can still move around between device and case.
There's probably no way to fix the scratches once their occur because its happening to the glass, not a layer of protection onto of it like paint is on a car. No matter what clear liquid you put on their to dry, it will always show the scratch/crack as light will refract at multiple angles, causing you to see the scratches/crack.
Also the finger print sensor is very eazy to scratch
Ironically when I got my Note 9 I left the plastic attached to the back of the phone from the factory before I installed a case on it . I learned this from my S8+ which also got similar scratches . My thought process is this , I was putting it in a case anyways and while the case itself should protect it . I decided to leave the plastic backing on the phone in place anyways . Not like I was going to see it under the case anyways .
Related
http://www.bestskinsever.com/google-nexus-10-skin
I find these to be very well made and great on all my devices.
Why would you want to cover the N10 with this? The rubberized texture of the N10 was made to be used "naked'
Techie2012 said:
Why would you want to cover the N10 with this? The rubberized texture of the N10 was made to be used "naked'
Click to expand...
Click to collapse
To protect the screen...
robbiev80 said:
To protect the screen...
Click to expand...
Click to collapse
Aaahh i thought you were going to get the full body one
I have the full body protector for my phone and I've installed many of these type of protectors but I have to say, installing on a device this big was very difficult. A week later and I still have bubbles! Anyone have toys on how to put these on better?
Sent from my Nexus 10 using xda premium
robbiev80 said:
To protect the screen...
Click to expand...
Click to collapse
gorilla glass 2 baby! no need for plastic protectors!
Techie2012 said:
Why would you want to cover the N10 with this? The rubberized texture of the N10 was made to be used "naked'
Click to expand...
Click to collapse
I bought a XOskin screen protector and also their carbon fiber back protector. Used the N10 with the protective film for several days but then removed it. I was thinking about returning the carbon fiber skin beccause it's too smooth compared to the rubberized back of the N10.
After just a few days of usage, what little tackiness the rubberized had is gone and it's fairly slick. I'm not about to clean it with whatever every few days to bring back what little grip it provided. I may slap the carbon fiber skin on after all.
Uh.. I have a hairline scratch in the corner and i still had the factory cover on and babied it. Gorilla glass doesn't protect worth crap.
Sent from my Nexus 4 using xda premium
Jayrod1980 said:
Uh.. I have a hairline scratch in the corner and i still had the factory cover on and babied it. Gorilla glass doesn't protect worth crap.
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Your the best ad for using a screen protector yet!
nissmo66 said:
gorilla glass 2 baby! no need for plastic protectors!
Click to expand...
Click to collapse
I decided to raw dog it, too, and see what happens. I've put protectors on every portable device I've had since...well, almost ever. But, when I got a replacement Galaxy Nexus in July, I never got around to putting a protector on the screen. Despite being some off-brand "fortified glass", it's totally unscratched. I take some care to avoid scratching it (nothing else goes in the phone pocket) but I don't carry it in a any kind of case or pouch. Since my Nexus 10 will be treated even more gently (i.e. not living in my pockets), it should be fine without a protector.
If I'm wrong, I'll put a protector on my OLED retina tablet in a couple years.
I've also been using my Galaxy Nexus with "fortified glass" (tempered, but not Corning Gorilla Glass) since the device was released (a year?) with only the 2 part Incipio case that Verizon Wireless sells for it (silicone liner, hard shell around it) - glass completely unprotected. I put the phone in my pocket (pants, shirt, jacket, etc.) every day, use the phone a LOT, have taken it to the beach (generally throw it in a ziplock bag), put it in my backpack, etc, etc. Not single visible scratch on it -- and I'm a stickler for this, as little flaws somehow always manage to grab my attention more than they deserve. Not saying that it's bulletproof by any means - but with reasonable care, my phone with bare glass still looks brand new. The N10 has Gorilla Glass 2 -- again, not impervious, but should hold up quite well to normal wear and tear. I enjoy the bare glass SO much more than the slightly rubbery feel and drag of a protector that it's worth a bit of extra care for me so I can get away with a bare screen.
I have the full body protection. Was a bear to get on, took 2 hours of my time to get all the pieces on and it did not go smoothly. I used to think I was pretty pro at putting wet application protectors on but this is a HUGE device and getting big vinyl film pieces wet and then onto the device without parts folding over and sticking to itself, etc was a night mare. I even messed up the front protector. Loads of bubbles everywhere after over a week. Not BSE's fault at all but I told them of my situation at the same time that I noted my N4 protectors did not have a proximity sensor cut out and they sent me a new full body kit for the n10 for free with my n4 screen protectors. Great customer service!
Can someone who has the full body protector, installed, post some pictures? I would love to see what a device looks like properly installed! I saw the video for XO and they aren't nearly as hard because, well, they aren't really full body protectors. They have one piece that protects the clam shell for the most part in the back but that is it. All corners and sides are completely exposed. Maybe this is good, as there's that nasty edge seem feel from the little individual pieces, but still. If I can't master the full body kit installation this, I'll just rock it with the front screen protector from BSE and order a dry carbon skins back cover from XO. Those dry carbon things are really really easy to install... you can even peel them off and re apply them on another device and it will stay. Loved that type of protector on my Galaxy Nexus. They are not as poor feeling on seams either.
Nevertheless... can someone please post pictures?
Jayrod1980 said:
I have the full body protection. Was a bear to get on, took 2 hours of my time to get all the pieces on and it did not go smoothly. I used to think I was pretty pro at putting wet application protectors on but this is a HUGE device and getting big vinyl film pieces wet and then onto the device without parts folding over and sticking to itself, etc was a night mare. I even messed up the front protector. Loads of bubbles everywhere after over a week. Not BSE's fault at all but I told them of my situation at the same time that I noted my N4 protectors did not have a proximity sensor cut out and they sent me a new full body kit for the n10 for free with my n4 screen protectors. Great customer service!
Can someone who has the full body protector, installed, post some pictures? I would love to see what a device looks like properly installed! I saw the video for XO and they aren't nearly as hard because, well, they aren't really full body protectors. They have one piece that protects the clam shell for the most part in the back but that is it. All corners and sides are completely exposed. Maybe this is good, as there's that nasty edge seem feel from the little individual pieces, but still. If I can't master the full body kit installation this, I'll just rock it with the front screen protector from BSE and order a dry carbon skins back cover from XO. Those dry carbon things are really really easy to install... you can even peel them off and re apply them on another device and it will stay. Loved that type of protector on my Galaxy Nexus. They are not as poor feeling on seams either.
Nevertheless... can someone please post pictures?
Click to expand...
Click to collapse
I just installed mine today. Was a breeze. I love bse. Pm me to remind me to post pics of mine installed. I'm out of town until friday, so ill try remember to post them then if no one pm's me.
So I took the plunge and purchased the aluminum frame found here:
I just got it in the mail and fitted it to my Verizon G2. Here's what I found:
1) As it's a bumper frame it doesn't cover the whole phone (duh) but the frame interior is fitted with a thin foam material to absorb shock and help with the fit. padding is found on the sides and corners of the frame's interior.
2) It comes with a screen protector. (dry apply 4h hardness aka throw away protector)
3) the lip on the front of the phone gives plenty of allowance for screen protectors but is so thin I'm afraid it may eliminate any glass screen protectors except for maybe the iLoome flex which is .12mm thick.
4) As the back is exposed I'm also investing in a body film like this.
5) Shipment was much faster than projected which is nice since it arrived on my doorstep from mainland China in only 2 weeks.
6) The fit on the front is great, but there are gaps between the back of the frame and battery plate. I was surprised by this since the VS980 is supposed to be the thickest G2.
7) as the back is open the aluminum does not interfere with my signal at all- not wifi, not 4g, nothing.
8) There is a cut out to access the Sim tray, but got to really want it out. Otherwise, you'll need to take the bumper off.
9) My phone can now stand on it's own! May come in handy every once and awhile.
Here's some pictures I'll answer any other questions you guys may have.
this is exactly what i was looking for.
Awesome! Thanks! just what I needed.
Sent from my LG-VS980 using Tapatalk
JCottle said:
So I took the plunge and purchased the aluminum frame found here:
I just got it in the mail and fitted it to my Verizon G2. Here's what I found:
1) As it's a bumper frame it doesn't cover the whole phone (duh) but the frame interior is fitted with a thin foam material to absorb shock and help with the fit. padding is found on the sides and corners of the frame's interior.
2) It comes with a screen protector. (dry apply 4h hardness aka throw away protector)
3) the lip on the front of the phone gives plenty of allowance for screen protectors but is so thin I'm afraid it may eliminate any glass screen protectors except for maybe the iLoome flex which is .12mm thick.
4) As the back is exposed I'm also investing in a body film like this.
5) Shipment was much faster than projected which is nice since it arrived on my doorstep from mainland China in only 2 weeks.
6) The fit on the front is great, but there are gaps between the back of the frame and battery plate. I was surprised by this since the VS980 is supposed to be the thickest G2.
7) as the back is open the aluminum does not interfere with my signal at all- not wifi, not 4g, nothing.
8) There is a cut out to access the Sim tray, but got to really want it out. Otherwise, you'll need to take the bumper off.
9) My phone can now stand on it's own! May come in handy every once and awhile.
Here's some pictures I'll answer any other questions you guys may have.
Click to expand...
Click to collapse
Do you screw it in?
yeah, there are 2 tiny screws at the bottom where you secure everything together. I should also mention how it actually ships with spare screws and a driver.
Bought this with a brushed steel wrap from slickwraps. Lets see how well it turns out on my black G2
Thanks for the review! Do you think you could take a picture of it standing up and also a picture detailing what you said for #6?
I bought a metal case for my last phone (Note 2) and it made reception worse. Maybe you guys will have better luck with this one
I ordered this in Champagne and the IQ Shield for my white LG G2... I hope it works out. Thanks for the review, I'll post back when I get mine (2 weeks shipping on the case)
@JCottle
Nice write up man.
How's your signal?
ikenvape said:
@JCottle
Nice write up man.
How's your signal?
Click to expand...
Click to collapse
I've had it on my phone since the write up and signal is going strong. Both wifi and 4G. I'd notice a drop because I'm on this beast phone all day.
JCottle said:
I've had it on my phone since the write up and signal is going strong. Both wifi and 4G. I'd notice a drop because I'm on this beast phone all day.
Click to expand...
Click to collapse
Rock on thanks bud!
thanks for taking the plunge buddy! ive had my eye on this one for a while but since i too have the vs980 i was weary of getting it as most cases stated they were compatible with the verizon model but in reality arent. i like bumpers and have a tpu that isnt made for the vs but it works. i ordered one of these and am excited to get it now. thanks!
Has anyone tried a case like this?
http://www.amazon.com/DAYJOY-Luxury-Aluminum-protective-protector/dp/B00HDE8E72/
Xeroday said:
Has anyone tried a case like this?
http://www.amazon.com/DAYJOY-Luxury-Aluminum-protective-protector/dp/B00HDE8E72/
Click to expand...
Click to collapse
Although that looks nice, I believe you'll have problems with signal and GPS, etc. Maybe wireless charging too if you have the VZW one.
Good to see people are giving this bumper a try. I've bought 4 cases for the vs980. This one finally adds a premium feel to the phone. And now I have some wet apply clear body film on it I think it's protected enough.
Whoever requested pics of it standing up I haven't forgotten about you. They're coming!
I would buy this in an instant if it wasn't for the bottom right corner. That eyesore should have been smoothed off like the other 3 corners
Sent from my LG-D802 using Tapatalk
SPBoss said:
I would buy this in an instant if it wasn't for the bottom right corner. That eyesore should have been smoothed off like the other 3 corners
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
I think it was meant to be there because that's what holds the phone up if you're setting it on a flat surface, so you can watch videos or w/e. at least, that's what makes the most sense.
Ryoma1337 said:
I think it was meant to be there because that's what holds the phone up if you're setting it on a flat surface, so you can watch videos or w/e. at least, that's what makes the most sense.
Click to expand...
Click to collapse
I think it's where the actual screws for the bumpers go
Xeroday said:
I think it's where the actual screws for the bumpers go
Click to expand...
Click to collapse
Yup! If you look real close at my pic of the bottom of your phone you can see the screw holes.
So I purchased a Skinomi full Techskin kit about $13, to wrap the sides and back of my Note 8. The application of it was pretty simple, there are videos online for it, on how to do it. The only weird thing about applying it is it pretty much doesn't stick at first when you place the solution on it, then as it dries it gets super sticky right away out of the blue. You can be moving it one second, then it just stays and is almost completely stuck on. You need to press down the edges and all and it takes about 45 minutes or less, but just keep revisiting it to press it down more. The back was ok, got some cloudiness (which they say is normal for a day or so) and maybe a couple of slight bubbles but I don't really care, it was mainly to prevent scratches. Attached are the pictures of what it looked like when I got it, and what it is like on the phone. You can feel it for sure, not as smooth as it transitions from one part to the other, but again, I got it to prevent scratches. I did not place the screen protector on it, because I was putting on tempered glass.
In addition you will see tempered glass, which I actually surprisingly feel like its good. No loss of feel at all, it just doesn't go all the way to the edges but the edge features all still work. Its a Luuvvit one, which I bought from amazon for about $11.00
Looks nice. Beats what I have on mine right now. Mine looks like a high 5 year old did it.
Holy crap that was funny!
Sent from my SM-N950U using XDA Free mobile app
I'll actually post some better pictures tomorrow on it. Realized these are not as good as they were taken right after. I'm amazed how unnoticeable it is, really liking this purchase.
I have my skinomi ordered i put it on all my phones. Great protection from dirt and dust getting around case edges etc etc. Keeps them brand new looking
Ok here are some better daytime pictures and bubblesare gone now
And last one
I did mine too with a skinomi full body skin before putting it into my case. I always full body wrap every phone because.....Why not? Dirt ALWAYS makes it's way between a case and the body of a phone. The skin keeps the dirt off and keeps the body like new! The guy at T-Mobile didn't believe I had the S7 Edge for a year until he looked up my account!
Fyi I dropped it on concrete and asphalt literally over a hundred times.
I'm not using the skinomi screen protector though. My Zizo Bolt case came with a Tempered glass protector that seals on the edges, but I've been super impressed and will keep it on until it breaks. Zizo is an awesome company! No sensitivity loss and super clear. Also no rainbow or bubbling. Yes there's a small dot matrix pattern though ( UGH ) but it's not visible at all on the screen while it's on, even in the sunlight.
I had the bolt on my s7 edge too. I love the case and it held up just as good as any otter box defender which I've used on tons of other phones. Like I said, it's been dropped a lot! Lol
Oh and a heads up...... hit it with a hair dryer and let it sit a day before using any tight fitting case or you will peel it up as you put the case on. Been there and done that. Learned my lesson. I LOVE skinomi skins but I equally like the IQ Shield too. Both make good stuff. IQ SHIELD feels a hair less rubbery but both are great!
Sent from my SM-N950U using Tapatalk
---------- Post added at 07:09 PM ---------- Previous post was at 07:08 PM ----------
Kawaisa said:
Looks nice. Beats what I have on mine right now. Mine looks like a high 5 year old did it.
Click to expand...
Click to collapse
Lmao love it !
Sent from my SM-N950U using Tapatalk
I always use skinomi screen protectors. Never got the full wrap since i always use a case.
My s8 plus, I have the skinomi screen protector and a rhionshield crash guard all works great together and the back of the phone doesnt touch so it never got scratched.
Order the same for my note 8. Im waiting for my crash guard to come in. probably at the end of the month, ill be caseless then then
And a tip is to lightly spray the phone. Then lay the protector on and push the bubbles out from the inside to the edge. Then run your fingers up and down the edges for a few minutes and it should stick. Then i let dry for 5mins and then rub everything again.
been doing that since the note 4 edge and has always work.
xile6 said:
I always use skinomi screen protectors. Never got the full wrap since i always use a case.
My s8 plus, I have the skinomi screen protector and a rhionshield crash guard all works great together and the back of the phone doesnt touch so it never got scratched.
Order the same for my note 8. Im waiting for my crash guard to come in. probably at the end of the month, ill be caseless then then
And a tip is to lightly spray the phone. Then lay the protector on and push the bubbles out from the inside to the edge. Then run your fingers up and down the edges for a few minutes and it should stick. Then i let dry for 5mins and then rub everything again.
been doing that since the note 4 edge and has always work.
Click to expand...
Click to collapse
Trust me even with a case, use a full body wrap! It not only keeps dirt off but acts as another cushion for impact even with a good case. They are worth the money for our nearly 1000$ device lol
Sent from my SM-N950U using Tapatalk
xile6 said:
I always use skinomi screen protectors. Never got the full wrap since i always use a case.
My s8 plus, I have the skinomi screen protector and a rhionshield crash guard all works great together and the back of the phone doesnt touch so it never got scratched.
Order the same for my note 8. Im waiting for my crash guard to come in. probably at the end of the month, ill be caseless then then
And a tip is to lightly spray the phone. Then lay the protector on and push the bubbles out from the inside to the edge. Then run your fingers up and down the edges for a few minutes and it should stick. Then i let dry for 5mins and then rub everything again.
been doing that since the note 4 edge and has always work.
Click to expand...
Click to collapse
How does the screen protector feel? Just like the back part? Or is it different material?
MACHEK said:
How does the screen protector feel? Just like the back part? Or is it different material?
Click to expand...
Click to collapse
I did a blind test with my wifes phone before (she remove hers from one of her old phones. I believe the s7e)
You can tell which is skinomi and and which is bare. The bare is slicker.
But overall if its very smooth and people wouldnt know it was there. 100% clear and no gel or ruff feels to it. Ive been using them for years and to me there the best.
Also you can get a 2pack for around $7 ship so if one wears out you can just put the other one on.
Kawaisa said:
Looks nice. Beats what I have on mine right now. Mine looks like a high 5 year old did it.
Click to expand...
Click to collapse
You must be my doppleganger, thats the sort of **** I normally do, i always seem to use the pretexts of "temporarily". Cutting pieces of car clear bra and sticking them on my ****. Lol[emoji2] love it
Sent from my SM-T819Y using Tapatalk
SKinomi has been a weird brand for me. It gets decent reviews but sometimes people hate it. I always get Skinomi for all my phones, imported to Korea because they don't sell them here. I love how thick it is, compared to other "films", which means extra protection. I also like how after a while the solution just seems to have some kind of a chemical reaction with the film itself, and makes the film look very glossy and clear like .... actual glass. Once I get a Note 8 again, I will probably put dome glass on the front, and another layer of skinomi on top, and the back will only be protected by Skinomi. I swear by this stuff, it's in a different league from other films.
ca12bon said:
SKinomi has been a weird brand for me. It gets decent reviews but sometimes people hate it. I always get Skinomi for all my phones, imported to Korea because they don't sell them here. I love how thick it is, compared to other "films", which means extra protection. I also like how after a while the solution just seems to have some kind of a chemical reaction with the film itself, and makes the film look very glossy and clear like .... actual glass. Once I get a Note 8 again, I will probably put dome glass on the front, and another layer of skinomi on top, and the back will only be protected by Skinomi. I swear by this stuff, it's in a different league from other films.
Click to expand...
Click to collapse
Does it show the s. Pen marks also can you send me a link where you buy them I'm on Thailand Thanks
magichoward said:
Does it show the s. Pen marks also can you send me a link where you buy them I'm on Thailand Thanks
Click to expand...
Click to collapse
Ahh actually, yes it shows the s.Pen marks, so don't put one in the front. For the front, use Glass dome, for the back skinomi. THis is the only one I could find on Amazon: https://www.amazon.com/Galaxy-Prote...sr=8-1&keywords=skinomi+note+8+back+protector
POST UPDATED WITH NOTE VERSION IN COMMENTS
So I'm going to cut to the chase here and say I've tried so many screen protectors for this damn phone that I'm fed up. They all sucked or had problems. Whitestone was a bear to install, got it perfect, then the sides started bubbling. Done with that. I've just been on the constant hunt for a stupid screen protector. Today was the day I gave up. I tore the skin I had on from Amazon because the edges just would not stick. It was only about a mm but it drove me nuts. I had a ring of fuzz and dust around my phone and the rubbery smudgy prone texture was just too much. I am SO FED UP with this hunt that I'm ready to take scratches, whatever.
So today while getting some crap at walmart I went to the phone section. No Note 8 protectors (it is habit to look now), but they had this one for the S8+. Those screens are similar, why the hell not I've tried everything short of lining my phone with clear packing tape.
I brought it home, applied it, patiently worked out the bubbles. Don't fret, even if you get a lot they work out easy. Have some tape near by to do the tape pull back and blot any dust spots you see. Then go through the process of getting rid of bubble again. I did this so many times because I was just doing it in a rush, thinking it wouldn't work at all, and getting dust in the damn thing. But I just kept patient and did the process over and over. It took a while, if I did it in the bathroom after running the shower it wouldn't have. IMO it worked amazingly well. It's a PET film with some flex, but it's NOT a skin. It's not self healing. It will show scratches over time, probably even more so with the Spen, but take care like you do and it will hold up well. It's not brittle like most older static PET films. It's literally the only protector of it's kind I've been able to find locally and the dozens on Amazon. It's a cheap, replaceable and great looking screen protector made for the S8+ but fits the Note perfectly. Here are my results. I used a soft rubber squeege that comes with the IQ shield, don't use a credit card or something that will scratch it. For many of the bubbles I just used my thumb. Finger prints wipe off very easy with this film. Hope this help someone going through what I have been.
Oh first, it's this one. 9.99. I plan on going back and getting all of them. lol
This one:
https://www.walmart.com/ip/ONN-Plastic-Screen-Protector-for-Samsung-Galaxy-S8/925343896
Even better just found one made for the Note 8. Same brand
Congrats man!
No glass no deal
Yeah well this post isn't for you then. Glass on a curved screen is joke. The only viable option is a rip off and not even that great after some use. This is for people like me who don't drop their phones (never have dropped or shattered a screen since the Iphone 3G). I want basic scratch protection that doesn't look like saran wrap. This is the one.
The Note specific version is even better. Highly recommend.
try the Rinke invisible defender. its 8 bux off amazon. it wraps over the sides so you don't have any lift issues. heres a youtube link. its probably one of the best NON glass protectors you can get.
https://www.youtube.com/watch?v=XMbol8eljIg&t=97s
Thanks but I tried that. It felt bad to me as far as texture. This one feels just like the glass. Unless I got a bad rinke lol
I think I've tried every possible type on Amazon. This is the best for me. Smooth like glass, doesn't hold on to prints, doesn't collect dust and doesn't lift at all . It's basically what I've been searching for about a month now or more.
For 9.99 it's perfect. Use and replace every 6 months or so if needed, though it feels resilient. Install is easy. I can't imagine having to replace the Whitestone every time it looks like crap after a while. Not to mention for the money it's way too fragile. Again just my opinion, I'm only trying to help those like me looking for scratch protection that looks and feels good
Here's the actual note version on my phone
Im looking for something like this since all those glass protector are a joke. At least we xan avoid scratches. This is the worse walmrt brand for assesories together with blackweb im surprise that their screen protector is good.
ferris2375 said:
Here's the actual note version on my phone
Click to expand...
Click to collapse
Where did you find the note 8 version?
I got it at Walmart.
eduardmc said:
Im looking for something like this since all those glass protector are a joke. At least we xan avoid scratches. This is the worse walmrt brand for assesories together with blackweb im surprise that their screen protector is good.
Click to expand...
Click to collapse
Yeah it was a last ditch effort to try the s8+ version. Never would have thought I'd like it this much. Just put another one on to make sure it wasn't dumb luck. I put the other on my wife's. It's beautiful. Lol The key to no lift is near perfect alignment. You need to be patient with the bubbles on this one but they come out fairly easy and the protector is really durable to pulling up and putting back down a couple times for a flatter lay.
I actually found the S8 plus version was a bit easier to align due to the fact that it has cutouts up at the top versus one large section cut out like on the note version.
ferris2375 said:
I got it at Walmart.
Click to expand...
Click to collapse
Did you find it in the store? I can't find it online at Walmart.com. Would you happen to have the SKU # or product number.
I hate to sound so excited about a piece of plastic but seriously this has been a pain in the ass trying to cover this screen. Frustrating
seawolf823 said:
Did you find it in the store? I can't find it online at Walmart.com. Would you happen to have the SKU # or product number.
Click to expand...
Click to collapse
Yeah in store. The s8+ version shows up online but not this one. I'll grab my reciept in a sec
Here's the reciept with sku. I've been to two that both have them. Again for anyone who is going to install this make sure you're in a dust-free area if possible have some scotch tape nearby to pull up and dab any dust if need be and make sure your alignment is spot-on. I was able to lift it adjust plenty of times and you may think you screwed it up but just keep at it. Alignment is the priority, then worry about dust and bubbles. You want it to be equal on both sides. Hope this helps. Oh and use your thumb or a rubber squeegee to press bubbles out from the center towards to sides.
I've been using the S Pen no problem it hasn't scratched it yet as long as you don't dig down with it you should be fine and it doesn't have the resistance like the Skins did it's glass like imo
Holy edits lol
One other tip. Be careful pulling the cover off the protector that covers the adhesive side. It's a little tricky to do without touching the underside but it's not bad. Just worth mentioning to take your time peeling that off before you lay it down. Sorry about all the posts I'm sick in bed and bored.
ferris2375 said:
Here's the actual note version on my phone[/QUOTe
Delete
Click to expand...
Click to collapse
GMAN1722 said:
ferris2375 said:
Here's the actual note version on my phone[/QUOTe
Delete
Click to expand...
Click to collapse
It's only in store, they aren't online yet. A few posts back I posted my reciept so you can get the SKU off that if it helps any.
Click to expand...
Click to collapse
Even though the back is glass and there is protection from external case, anyone installed a protector in the back (film, glass, or anything material)
Any brands or suggestions?
thanks a million.
I use this, but I also have a skin, and a case haha so probably a little overkill but I don't want to damage this thing. If I could wrap a pillow around it I would. https://m.aliexpress.com/s/item/32832315490.html?spm=a2g0n.search-cache.0.0.30c0f4f1MpT7WO#autostay
Yeah, me really thinking about getting one for the back as well, prefer glass type.
MACHEK said:
I use this, but I also have a skin, and a case haha so probably a little overkill but I don't want to damage this thing. If I could wrap a pillow around it I would. https://m.aliexpress.com/s/item/32832315490.html?spm=a2g0n.search-cache.0.0.30c0f4f1MpT7WO#autostay
Click to expand...
Click to collapse
For the back, i know that there is lots of film ones. Some sites in other languages sell glass ones but it doesn't look trustworthy and there maybe shipping problems ..
Just trust the robots at dbrand. Best back skins around, look cool also!
Sent from my Galaxy Note8 using XDA Labs
I ordered the slickwraps horror series one, once i get it and apply it ill post pics
Yes Dbrand skin. Dragon skin
mikeyjrd said:
For the back, i know that there is lots of film ones. Some sites in other languages sell glass ones but it doesn't look trustworthy and there maybe shipping problems ..
Click to expand...
Click to collapse
Well you asked and that's where I got mine, and had no issues, just like buying from eBay. I also have a skinomi full skin on it.
I installed a full body skinomi, good for protecting back from dust and sand particles that inevitably will get between the case and the back of the phone, these particles trapped this way cause a lot of damage
winol said:
I installed a full body skinomi, good for protecting back from dust and sand particles that inevitably will get between the case and the back of the phone, these particles trapped this way cause a lot of damage
Click to expand...
Click to collapse
Agreed. Hated the way my note 3 looked after a case. Resale should be much easier with a near perfect phone.
MACHEK said:
Agreed. Hated the way my note 3 looked after a case. Resale should be much easier with a near perfect phone.
Click to expand...
Click to collapse
winol said:
I installed a full body skinomi, good for protecting back from dust and sand particles that inevitably will get between the case and the back of the phone, these particles trapped this way cause a lot of damage
Click to expand...
Click to collapse
Did u get a glass protector in front and fits in your case too?
No, because I have bad experiences in the past with cristal protectors that never fit really well with curved screens
2nd for the dbrand dragon skin. Also adds some friction for holding the phone without adding any thickness
I ordered 2 slickwraps Note 8 naked series for the back. One glossy and one Matte. They are regularly 15.95 each but they have a 50% off sale going now with the code Apocalypse so I bought both for 15 bucks to try them out.
Semantics said:
I ordered 2 slickwraps Note 8 naked series for the back. One glossy and one Matte. They are regularly 15.95 each but they have a 50% off sale going now with the code Apocalypse so I bought both for 15 bucks to try them out.
Click to expand...
Click to collapse
Is the Glossy one completely transparent? The pics on website show a black tint which covers mirror shine. What about the sides and top & bottom?
Don't like the skinomi cuz u have to spray & spray.
mikeyjrd said:
Is the Glossy one completely transparent? The pics on website show a black tint which covers mirror shine. What about the sides and top & bottom?
Don't like the skinomi cuz u have to spray & spray.
Click to expand...
Click to collapse
The glossy is completely transparent. It's a thick plastic, though, and you need a ton of solution to get it on, etc. It only comes with the back pieces, they don't seem to have a kit for the Naked series.
Semantics said:
The glossy is completely transparent. It's a thick plastic, though, and you need a ton of solution to get it on, etc. It only comes with the back pieces, they don't seem to have a kit for the Naked series.
Click to expand...
Click to collapse
"need solution" means you have to add the glue yourself? does it cover all the way to the edges?
I know Rhinoshield makes one, not glass, and it doesn't go all the way to the edges.
mikeyjrd said:
"need solution" means you have to add the glue yourself? does it cover all the way to the edges?
I know Rhinoshield makes one, not glass, and it doesn't go all the way to the edges.
Click to expand...
Click to collapse
It goes all the way to the edges but it's not glue, its just a soap and water mix they give you in a spray bottle.
Semantics said:
It goes all the way to the edges but it's not glue, its just a soap and water mix they give you in a spray bottle.[/QUOTE
Thats the same way you apply the skinomi stuff, but their clear wraps are not transparent. I want the peel & stick type. I'll check in other places to see.
Thanks anyways
Click to expand...
Click to collapse
I got a wet applied screen protector for the back. I want to maintain the look of the back without covering it with a skin. This is the one I have and works perfectly with my Lumion case. (I imagine it would work with any case) https://www.amazon.com/gp/product/B07516Y9B5/ref=crt_ewc_title_gw_2?ie=UTF8&psc=1&smid=AZPYIARPTPBOT
For those without back protectors but use a case, the back will still get scratched easily. On my Galaxy S6 Edge Plus, the glass back had tiny scratches even if I kept the phone in a case all the time. Tiny dust particles still managed to get trapped between the glass back and the case. A back protector is a must if you want to maintain the pristine condition of the back glass.
Slickwraps plus spigen
Bought a slikwraps skin and a spigen clear case.
Slickwraps as usual is a pain in the butt to install and they always take 2+ days to ship the item from the moment you buy them but is till prefer their designs.
Spigen iv'e use them since my s6 and i always liked them, past spigen clear cases turn yellow after some time, i'm hoping this ones won't since it says they have improved the yellowish thing happening.