Database Develop

ROM installation fails with Status 7

Hi,
when I try to install the unofficial CM cwm recovery quits with status 7 and says something about installing on top of invalid data.
The official OTA Update to KitKat failed too. This was why I unlocked the bootloader and installed cwm . Any suggestions?
I already tried to remove the device checks from the update script in the cm rom like suggested many times to solve status 7, didn't work for me.
EDIT: Updatet CWM to v6.0.5.1, still not working
EDIT2: After trying the OTA Update again with CWM 6.05.1 the device is in a bootloop now.
CWM says that the signature verification failed and asks to install anyway. If I do it files with status 7 and reboots, reboots again. and tries to install again. If i don't it reboots, reboots again...

Have you done the wipe/factory reset directly before flashing the cm11 rom?
check hazous initial post for cm11 rom

Well, I did a factory reset, but I did't it not immediately before rom installation.
Anyway, it worked now. Thanks for the rtfm pointsatme...

Updater process ended with ERROR: 7 | assert failed: oppo.verify_trustzone

Hi guys today I tried to update my RR rom to newer version but everytime I try to flash rom i get error:
Updater process ended with ERROR: 7
Error installing zip file '/sdcard/Download/RR-N-v5.8.1-20170208-oneplus3t-Official.zip'
Updating partition details...
...done
I tried wiping data, factory resetting, switching system image back to f2fs and on ext4 but nothing, same error every time.. I have TWRP 3.0.4.1 and phone boots to system normaly

99% chance of a corrupt zip.

ast00 said:
99% chance of a corrupt zip.
Click to expand...
Click to collapse
Its not corrupt, i redownloaded zip couple of times, tried different rom zip too, checked md5 it matches, its something else
There is also this error in log:
Comparing TZ version TZ.BF.4.0.1-76917 to TZ.BF.4.0.1-0028.2
assert failed: oppo.verify_trustzone("TZ.BF.4.0.1-76917") == "1"

Your phones firmware partitions are to old, you need to update to the Oxygen OS 4.0.1 stable or even better to 4.0.2 for it to accept it and install.
This is the second thread with the same problem I'm answering.
Just check out koenkks unofficial LOS 14.1 thread, he has linked to the zip packages for TZ 4.0.2 for both 3/3t in the first post.

https://forum.xda-developers.com/showthread.php?t=2522762

Thanks guys I solved the issue yesterday, I just flashed OS 4.0.2 and reflashed latest version of RR over that

That's the long road of doing it, but end result is the same of course.

I'll use this thread since I have a very smiliar problem and I can't post in the developers forums.
I tried to install the latest LineageOS Nightly on my 3t but I also got the assert failed error message.
I used the unofficial TWRP 3.0.4-1 as suggested but one thing I overlooked was this:
"Started from lineage-14.1-20170207-nightly-oneplus3-signed.zip, we provide unified builds for both 3&3T, and you need to install certain firmware to pass the TrustZone assertion. Currently they're the OxygenOS 4.0.2 ones. As oneplus won't update them every time new OTAs are rolling out, firmware from other versions might also pass the assertion."
Yesterday I updated to OOS 4.0.3. (haven't had a custom rom installed yet) Can anyone confirm that this causes the error? Or did someone manage to switch from 4.0.3 to LineageOS?
Since I have a nandroid backup it's not that big of a deal but it's still annoying.
Hope anyone has an idea.
Best Regards

Need urgent help, please

Hi, two days ago i tryied to install Xposed framework, and my Huawei P10 (VTR-L29C432B360) ended in a bootloop.
I reinstalled your TWRP (Oreo V3) but when i tryied to open in recovery it got stucked and the follow message appears in red:
" ERROR MODE
Attention: Please update system again
(android image followed by yhe rest of the message)
Error
Func NO:11 (recovry image)
Error NO:2 (load failed) "
I tried every single methods, but with out result.
Can someone help me, please?
I allready tried this thread, both methods: https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286

Then I guess you should unbrick it..xposed is not really friendly with emui, i remember since i had my p8 lite and it's not worth trying. Better stick with magisk modules.
Try this .

I tried, but the recovery_ramdisk gives me error

you need too flash kernel.extract oreo files and flash kernel.img after that you can reach twrp

Also having the same issue. I've flashed the Kernel as well via fastboot but no luck. I don't have access to a Windows machine at the moment but will try tomorrow. Unless anyone knows what I have to flash via fastboot to fix this? My device was updated to Oreo if it helps.

https://forum.xda-developers.com/p10/help/help-please-error-mode-recovery-t3757571 check here

[OpenGApps] Getting error 255 when installing OpenGApps 10 Aroma

I wanted to install Aroma because I want the choice of installing whichever app specifically and mainly so that I can replace stock AOSP apps with Google ones. I tried to do that on top of clean flash RR 8.6.2 which does not comes with any pre-built GApps.
But upon installation on OrangeFox it freezes for 2-3 seconds and gives error 255. This is ARM64 Android 10 Aroma so guess I chose the right version but still the error. I can install others like pico, nano, mini and stock just fine but not aroma.
I even tried previous months versions but no luck. Tried installing ROM, set it up and Aroma separately with going to recovery again but still the same error. I am able to flash ANX camera, custom kernel & Fdecrypt just fine but not this one...
If anybody could help what is the issue.

I too am having this issue with the moto edge (racer). Had issues rooting. TWRP went in, flashed lineage 17.1, rebooted, TWRP gone, LineageOS recovery in its place, attached to USB, flashed TWRP ... AGAIN, rebooted, did a root check, root check said "no bueno". Thought that had something to do with it. Finally got a good copy of SuperSU flashed with "success" confimation. NO ERRORS! rebooted. Let everything run its course, for about 10 minutes (way longer than necessary) then tried to flash OpenGapps 10 Aroma and it fails. tried w/ and w/o signature verification, ARM and ARM64. All of it fails! no matter what version, w/sig ver. I get Error 255. w/o it, I ironically get "Zip Signatured Verification Failed!"
Please, somebody heeeeeellllllp

Skorpyun812 said:
I too am having this issue with the moto edge (racer). Had issues rooting. TWRP went in, flashed lineage 17.1, rebooted, TWRP gone, LineageOS recovery in its place, attached to USB, flashed TWRP ... AGAIN, rebooted, did a root check, root check said "no bueno". Thought that had something to do with it. Finally got a good copy of SuperSU flashed with "success" confimation. NO ERRORS! rebooted. Let everything run its course, for about 10 minutes (way longer than necessary) then tried to flash OpenGapps 10 Aroma and it fails. tried w/ and w/o signature verification, ARM and ARM64. All of it fails! no matter what version, w/sig ver. I get Error 255. w/o it, I ironically get "Zip Signatured Verification Failed!"
Please, somebody heeeeeellllllp
Click to expand...
Click to collapse
UPDATE: For some reason Aroma wasn't giving me error logs but, after trying "full", I noticed the error message was that my device is ARM64. Then, after trying 9.0 and 10 ARM64, (both full versions, not aroma) I found in the logs that there was insufficient space to install. The log for some reason, claims the full version needs 1.7 TB?! So I grabbed a copy of OpenGApps 10 ARM64 pico and that worked. I got basic play store function, that's all I really needed. . . Do not ask why I didn't think of that sooner. Hope this helps poster or anyone else. \m/

E:Unable to decrypt FBE device

Hi,
I have a problem with my lenovo "L78032":
Last week, I tried to flash the lineage 17.1 rom but some fonctionnalities were not working .
then I flashed the crDroid rom but the fingerprint and the camera were not working very good.
before that, I had installed twrp 3.3.0 but now I have twrp 3.3.1 .
When I tried to flash an os or wipe data ....
I have this message: E:Unable to decrypt FBE device.
I tried to wipe all data but it does not work.
Then I tried to flash "disable dm verity forceencrypt08/18/2019" but it does not work .
The next day , I tried to reflash crdroid.
today I noticed that I can browse my files .
Result: I can't boot correctly and I get directly redirected to the bootloader.
I also tried to use QFIL but I get "Download Fail:Sahara Fail:QSaharaServer Failrocess Fail"
Now I don't have OS, I only have twrp 3.3.1
somebody can help me ?
thanks

BENJl said:
Hi,
I have a problem with my lenovo "L78032":
Last week, I tried to flash the lineage 17.1 rom but some fonctionnalities were not working .
then I flashed the crDroid rom but the fingerprint and the camera were not working very good.
before that, I had installed twrp 3.3.0 but now I have twrp 3.3.1 .
When I tried to flash an os or wipe data ....
I have this message: E:Unable to decrypt FBE device.
I tried to wipe all data but it does not work.
Then I tried to flash "disable dm verity forceencrypt08/18/2019" but it does not work .
The next day , I tried to reflash crdroid.
today I noticed that I can browse my files .
Result: I can't boot correctly and I get directly redirected to the bootloader.
I also tried to use QFIL but I get "Download Fail:Sahara Fail:QSaharaServer Failrocess Fail"
Now I don't have OS, I only have twrp 3.3.1
somebody can help me ?
thanks
Click to expand...
Click to collapse
It might worth trying the below post
[GUIDE] Unbrick Guide for Lenovo Z5 Pro GT [L78032/Stock Firmware/BootLoop Fix]
This tutorial is based on the Lenovo Z5 Pro(L78031 - NO-GT version) tutorial By BadCluster .Features - Unbrick - BootLoop Fix - Stock Rom - Stock Firmware - Stock Recovery - System as new as factory Note: This tutorial will remove all your...
forum.xda-developers.com