So I've been having lots of problems, it all started trying to upgrade to oreo from nougat and I got stuck part way with trying to install recoveries and missing the _ramdisk part. So then I think I was stuck somewhere in-between nougat and oreo and @Jannomag has been a huge help trying to push the device towards Oreo. You can see the thread where that begun here (https://forum.xda-developers.com/p1...-partition-length-t3766191/page2#post75966617) and Jannomag's guide here (https://forum.xda-developers.com/showpost.php?p=75760807).
After that as going to oreo wasn't working I looked into maybe trying to roll back to nougat as TWRP 3.2.1 was working. I have followed this guide as best I could (https://forum.xda-developers.com/p10/how-to/guide-to-rollback-huawei-p10-oreo-to-t3735156) and got to the end where you install the update let the phone reboot to huawei recovery to install the update. However the update got to 6% in verifying update and failed. At this point I tried to reflash twrp from fastboot. That seemed to flash fine however when I reboot the phone to recovery (vol-Up + pwr) it boots to the huawei recovery menu with reboot/wipe data/wipe cache options. I have tried flashing both twrp 3.2.1 3.1.1 and 3.0.1 and even reflashing the stock recovery before these from the file linked in the rollback guide that HWOTA8 uses (MHA_RECOVERY8_NoCheck.img)
Any ideas for fixes this are appreciated,
Thanks
Edit: Solved using DC-phoenix
Hi folks,
I'm facing a problem with my Huawei P10. It was running VTR-L29C432B371 firmware (Oreo 8.0.0, EMUI 8.0) rooted with Magisk v17 (I think), bootloader is open. TWRP is running on 3.2.1-0.
I lost my Magisk Manager app and therefore wanted to reinstall Magisk completely. I booted to TWRP and installed the following: Magisk-uninstaller-20190328.zip
Now my phone does not start anymore, it says:
Error Mode, Attention! Please update system again. Error!
Func NO : 10 (boot image)
Error NO : 2 (load failed)
I cannot install Magisk anymore but TWRP and fastboot is still working. Does anyone know what is going on? How can I bring my P10 back to life? Would it help to flash ramdisk image (Huawei doesn't have boot.img I think) and where could I find this?
I forgot to mention: I do need my data. So wiping / factory reset is not an option...
Many thanks in advance,
Jens
Hi,
I am trying to install on my device the TWRP image but it doesn't work.
What I've tried so far:
A tons of twrp images
SRK Tool
injecting image to recovery
injecting img to recovery2
injexting image to recovery_ramdisk
Nothing works still. The error im getting is "partition length get error"
Im running EMUI 9.0.1 and Android 9 Build Version 9.0.1.175(C432E2R1P5). Any ideas how to get TWRP work on my device?
You are running a HONOR 9 and you wanna help to install TWRP on a P9 thread... maybe you try to install the wrong version.
(Resolved)
my device is not starting the system anymore, it enters fastboot without problems, but twrp is very strange, does not erase anything from memory, does not install zip files, I tried to uninstall the magisk and error1 appears. I'm not able to install the rom stock of my device, I don't have much experience with it but I know the basics. someone help me please.
Info: -Zenfone 4 2017 (ZE554KL) SDM630 64GB/4GB
-The device was rooted (magisk)
-was with asus rom
-contains twrp 3.1.1-0 (problematic)
I tried asus flash tools but does not recognize my device, I tried QFIL and also did not recognize "port available" and an XML error occurred.
I do not know what to do.
----------
I don't know why, but TWRP worked perfectly after a while.
I managed to fix it by cleaning the stock ROM with TWRP and then installing the original recovery, I downloaded the first version of ROM to my device on the official website and installed.
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
ajadamjones87 said:
Hi all,
I have a rooted redmit note 9 that was running the stock rom (EU version i believe as i am UK based) perfectly well for several months until today when then latest over the air update installed and my phone is now stuck in a bootloop where i can only access the custom PBRP recovery (installed from when i rooted previously). I can also access fastboot. I have tried wiping all data and cache etc, i have tried reflashing the magisk patched stock rom that previously worked, i have also tried flashing vbmeta that i flashed previously but still no luck. This is my only phone so I really need to get it working again.
I was about to try re-flashing the stock rom with SP tool but it tells me the scatter file is invalid.
Not sure what else to try now. I also note that when i PBRP loads up it always asks for a password however i dont have a password on the device.
Please could someone suggest something i could try?
Click to expand...
Click to collapse
your devices is encrypted try flash other custom rom first then try revert to stock hope it help u out
Thanks very much for your response. Based on your advice i tried to flash the latest Kraken 11 Vanilla rom from this fourm, however after installing via TWRP now i can't even get into recovery anymore, just goes straight to fastboot.
Any other suggestions please?
I have now managed to get back in to TWRP and tried flashing lineage latest rom but still i am stuck in a boot loop taking me to fastboot this time.
Please can someone help suggest hwo i can get my phone working agian. At this point i dont care which rom i end up (custom or stock) with as long as i can get it to function again
If your device is rooted, you can NOT update the system using the OTA (over-the-air), or the device will be stucked in bootloop.
If your device is rooted, you need to update the system MANUALLY, using the fastboot or spflashtool.
I suggest to update the system using the fastboot.
Now, you need to flash the whole MIUI again, except userdata and you will have your device back.
For anyone with a asimilar problem i eventually managed to fix my issue by using miflash tool version 20180528 and flashing merlin_eea_global_images_V12.0.10.0.QJOEUXM_20210413.0000.00_10.0_eea_c4a9d5d7fc fastboot version which i downloaded from the xiami site.
I had to try this multiple times because the extraction of the file did not seem to be correct on the first attempts.