I tried converting my A2 to the 6X model and something went wrong. My phone is not recognized by fastboot and I can not go into EDL cause of that
I managed to get into EDL with the "check point" method
Did you tried to enter EDL mode with button combination?
Sent from my MI 6X using Tapatalk
Mr.Nice.ba said:
Did you tried to enter EDL mode with button combination?
Sent from my MI 6X using Tapatalk
Click to expand...
Click to collapse
Whats the button combination?
Here is the link:
https://www.smartphones.how/repair/edl-mode
Sent from my MI 6X using Tapatalk
Mr.Nice.ba said:
Here is the link:
https://www.smartphones.how/repair/edl-mode
Sent from my MI 6X using Tapatalk
Click to expand...
Click to collapse
I wish I could do the one in which I need to turn off the phone and press volume up and the power button but there's no way i can turn off my phone :/
Press and hold power button for longer period, your phone will reboot for sure.
Sent from my MI 6X using Tapatalk
Mr.Nice.ba said:
Press and hold power button for longer period, your phone will reboot for sure.
Sent from my MI 6X using Tapatalk
Click to expand...
Click to collapse
That didn't work. Tried it earlier. I just cant get it to boot to EDL :/
How you solved this problem?
Try with edl cable
asiranno said:
I tried converting my A2 to the 6X model and something went wrong. My phone is not recognized by fastboot and I can not go into EDL cause of that
I managed to get into EDL with the "check point" method
Click to expand...
Click to collapse
Enviado desde mi Mi A2 mediante Tapatalk
asiranno said:
I tried converting my A2 to the 6X model and something went wrong. My phone is not recognized by fastboot and I can not go into EDL cause of that
I managed to get into EDL with the "check point" method
Click to expand...
Click to collapse
Hi! I have the same problem. Did u flashed 6X rom or A2 stock rom? I don't want to hardbrick (again) my device.
crisagler said:
Hi! I have the same problem. Did u flashed 6X rom or A2 stock rom? I don't want to hardbrick (again) my device.
Click to expand...
Click to collapse
I flashed stock MI A2 rom
Related
I need help
theprof23 said:
I need help
Click to expand...
Click to collapse
Give more information, i dont understand
Enviado desde mi Moto X mediante Tapatalk
theprof23 said:
I need help
Click to expand...
Click to collapse
install adb and fastboot. connect your phone. open cmd where fastboot has been installed and type fastboot reboot
Hi,
I have a big issue with my Mi 5 right now. Can anyone help me with this please? The fastboot seems to be broken. These are symptoms:
1. I connected my phone to the computer, with USB debugging turned on, in normal mode, open adb command promp, I typed adb devices, adb recognize the phone, then I type adb reboot bootloader to reboot the phone to bootloader, it works, the phone goes to fastboot mode, and I type adb devices, adb does not recognize the phone. Therefore I can't install TWRP. I fell something not right at this moment.
2. I can't use MiFlash to flash my phone anymore. I plugged the phone in, with USB debugging turned on, in fastboot mode. The latest MiFlash can recognize my phone but when I flash the 7.4 global ROM, it just run something, but does not have any effect on the phone. The phone restarts, nothing changes. I tried the older MiFlash, and this one does not recognize my phone.
3. I can't update the phone through OTA or the xiaomi updater with downloaded ROM from official xiaomi. It says something not right. There's only a circle appear, the phone restart, and nothing changes.
4. I can't reset the phone to factory using the reset function in setting. There's only a circle appear, the phone restart, and nothing changes.
My phone is running global ROM 8.0.2.0 Stable from xiaomi. The previous ROM I flash is Resurrection Remix Rom. I used MiFlash to flash back to the 8.0.2.0 Rom. The phone has never been rooted. Everything is running well on my phone. Except that fastboot. I am using windows 10 anniversary. ADB is installed. I tried on windows 7 on my laptop, it has the same problem.
These are some methods on the internet I did try but nothing changes. Please help me. Thank you so much
On fastboot mode you should use fastboot command, not adb. Did you flash it via edl mode?
Sent from my MI 5 using Tapatalk
having the same problem here, miflash doesn't work
arif_kholid said:
On fastboot mode you should use fastboot command, not adb. Did you flash it via edl mode?
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
how to enter edl mode?
tsukiyakie said:
having the same problem here, miflash doesn't work
how to enter edl mode?
Click to expand...
Click to collapse
Fastboot oem edl
Sent from my MI 5 using Tapatalk
arif_kholid said:
Fastboot oem edl
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
tried it, the screen went blank and nothing happened afterwards, am I doing it wrong?
tsukiyakie said:
tried it, the screen went blank and nothing happened afterwards, am I doing it wrong?
Click to expand...
Click to collapse
Maybe you are on newer firmware where edl mode is locked. You can try update via Chinese mi pc suite or unlock your bootloader then flash via fastboot
Sent from my MI 5 using Tapatalk
arif_kholid said:
Maybe you are on newer firmware where edl mode is locked. You can try update via Chinese mi pc suite or unlock your bootloader then flash via fastboot
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
I see...
Btw I already unlocked the bootloader.
Is it possible to flash official FW via fastboot? If so, would u mind telling me how?
tsukiyakie said:
I see...
Btw I already unlocked the bootloader.
Is it possible to flash official FW via fastboot? If so, would u mind telling me how?
Click to expand...
Click to collapse
Yes it's possible and safest way to flash via fastboot. You can use miflash for that, I'm sure there is some tutorial on this forum or If you cant find it then go to miui forum
Sent from my MI 5 using Tapatalk
Hı all. My phone has global stable rom.I want to unlock.but as ı heard need to chine developer rom.how can I doğru this. With edl mode? İf only edl mode need edl cable ?
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
cheleby said:
Hı all. My phone has global stable rom.I want to unlock.but as ı heard need to chine developer rom.how can I doğru this. With edl mode? İf only edl mode need edl cable ?
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
There is no need of Chinese ROM or edl mode. You can unlock your device with global stable ROM. Just follow these steps.
1. First request for unlock permission from here
2. Wait for the permission to arrive.
3. Connect your device in fastboot mode. And unlock.
cheleby said:
Hı all. My phone has global stable rom.I want to unlock.but as ı heard need to chine developer rom.how can I doğru this. With edl mode? İf only edl mode need edl cable ?
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Unless they've changed things you need a developer rom to unlock. If you're on Global Stable download the latest Global Developer rom and use the Updater app to install it (three dots - choose package to install). It will wipe your phone.
Laurencito said:
Unless they've changed things you need a developer rom to unlock. If you're on Global Stable download the latest Global Developer rom and use the Updater app to install it (three dots - choose package to install). It will wipe your phone.
Click to expand...
Click to collapse
Hı again. I solved with below
)*Settings---> About phone---> MIUI Version (Tap on it to enable developer option), this option is available in MIUI 8.1 onwards.*After you've enabled developer option then head towards:
Settings---> Additional settings---> Developer option and bind your approved Mi account under Mi Unlock Status.
2. Log into the Mi account which has acquired unlocking permission on your device
3. Turn off your device, press the Power button and Volume - button at the same time to enter bootloader mode*
4. Log into the unlocking tool on PC with the same Mi account. Connect the device with the PC using USB cable
5. Press 'Unlock'. The unlocking process will complete in about 10 seconds
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
My little brother tried to convert MiA2 into mi 6x.He flashed the mi6x rom without deleting the firmware folder and also didn't replace the A2 camera files.He flashed the miui 10.2 rom and locked the bootloader.now I am stuck on miui 10 rom and my camera app crushes.No third party camera app works(tested them all).Tried testpoint method.It doesn't work too.I can flash only the patched miui rom which is terrible and buggy.Several apps crush all the time.Youtube app doesn't work.Does anyone have faced similar problem! Can i have any solution please?
Unlock_crit then reboot to edl mode, then reflash using mi flash
hafizhlf said:
Unlock_crit then reboot to edl mode, then reflash using mi flash
Click to expand...
Click to collapse
Doesn't work.I can reboot to fastboot mode but cannot flash anything.My bootloader is locked and i am not in stock rom
Nayeemmnu said:
Doesn't work.I can reboot to fastboot mode but cannot flast anything.My bootloader is locked and i am not in stock rom
Click to expand...
Click to collapse
Trigger edl mode via shortpoint gotta open up device short the pins while inserting usb slot. Took me a lot of tries to get this done properl
Sent from my Xiaomi MI 6X using XDA Labs
dr460nf1r3 said:
Trigger edl mode via shortpoint gotta open up device short the pins while inserting usb slot. Took me a lot of tries to get this done properl
Click to expand...
Click to collapse
Did you face same problem!
I took it to a service center. The person there tried this method.but he couldn't do it.Rather he bricked my phone totally.Later flashed the patched rom again.Also he removed imei number.now imei shows 0000000000 but i can use the phone. There is no problem with network. Testpoint method is supposed to work but flashing gets stuck at 50-60% every time.
im also stuck on miui with locked bootloader. You can't flash a2 rom beacuse u have enabled arb 4. I was looking for a solution but didnt find so far
Nayeemmnu said:
Did you face same problem!
I took it to a service center. The person there tried this method.but he couldn't do it.Rather he bricked my phone totally.Later flashed the patched rom again.Also he removed imei number.now imei shows 0000000000 but i can use the phone. There is no problem with network. Testpoint method is supposed to work but flashing gets stuck at 50-60% every time.
Click to expand...
Click to collapse
Tried to convert and locked bootloader while no system installed accidently.
The trick in my case was to press power button while pressing flash. Otherweise it would fail
Try different USB Ports too
Sent from my Xiaomi MI 6X using XDA Labs
dr460nf1r3 said:
Tried to convert and locked bootloader while no system installed accidently.
The trick in my case was to press power button while pressing flash. Otherweise it would fail
Try different USB Ports too
Click to expand...
Click to collapse
Which rom did you flash??
Hey guys after doing stupid this i ended up with an locked bootloader and and boot loop with (The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it. ).
now i can only access to the phone in edl mode
atm im searching for ways to flash a rom in that edl mode but its difficult
so i need ur help guys
whyphyrl said:
Hey guys after doing stupid this i ended up with an locked bootloader and and boot loop with (The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it. ).
now i can only access to the phone in edl mode
atm im searching for ways to flash a rom in that edl mode but its difficult
so i need ur help guys
Click to expand...
Click to collapse
it is simple to put the mode in bootloader, then flash the recovery of mauronfrio and from there you install the rom that you are going to put, then start and the mobile will go to you
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
it is simple to put the mode in bootloader, then flash the recovery of mauronfrio and from there you install the rom that you are going to put, then start and the mobile will go to you
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
no i cant get into any bootloader or fastboot or recovery only thing that works is pressing vol+ and power for some sec then its blackscreen and its shows me connected as Qualcomm HS- USB QDLoader 9008(COM3)
whyphyrl said:
no i cant get into any bootloader or fastboot or recovery only thing that works is pressing vol+ and power for some sec then its blackscreen and its shows me connected as Qualcomm HS- USB QDLoader 9008(COM3)
Click to expand...
Click to collapse
ok that happens you have to leave it about 4 hours without doing anything and then it will work for you alone, it happened to me and looking for I saw that it is like a mistake they have to protect themselves and they are deactivated for a few hours, do not connect it or try to turn it on or anything, set it aside for about four hours and then try
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
ok that happens you have to leave it about 4 hours without doing anything and then it will work for you alone, it happened to me and looking for I saw that it is like a mistake they have to protect themselves and they are deactivated for a few hours, do not connect it or try to turn it on or anything, set it aside for about four hours and then try
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Hi
I'm in the same problem, you also blocked the BL and the same thing happened to you? Then leave it for approx. 4 hours and can I enter the FB?
Sergiocubano1 said:
ok that happens you have to leave it about 4 hours without doing anything and then it will work for you alone, it happened to me and looking for I saw that it is like a mistake they have to protect themselves and they are deactivated for a few hours, do not connect it or try to turn it on or anything, set it aside for about four hours and then try
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
sounds very weird to me but ill give it a try
it didn't work for me
Isavar said:
it didn't work for me
Click to expand...
Click to collapse
You have left it almost four hours and then you have tried to turn on and arrange the charging cable, connect it and then press and hold on + vol + to see if it turns you on that way, I already tell you I had scared for almost 5 hours until without anything else property and look for information and it happens in all are blocked and you have to wait a good while, although the computer recognizes you as a device, he doesn't give an image
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
You have left it almost four hours and then you have tried to turn on and arrange the charging cable, connect it and then press and hold on + vol + to see if it turns you on that way, I already tell you I had scared for almost 5 hours until without anything else property and look for information and it happens in all are blocked and you have to wait a good while, although the computer recognizes you as a device, he doesn't give an image
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
didnt worked for me to
whyphyrl said:
didnt worked for me to
Click to expand...
Click to collapse
Connect the cable and try to light it by pressing the volu + and turning on
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Connect the cable and try to light it by pressing the volu + and turning on
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
yeah then im in edl mode or whats it called
whyphyrl said:
yeah then im in edl mode or whats it called
Click to expand...
Click to collapse
Normally it is to enter the recovery, but they say that this is revived
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Connect the cable and try to light it by pressing the volu + and turning on
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
not working, do you block BL after remplace original recovery for twrp?
I comment to see if you are in the same case as us
cheers
Isavar said:
not working, do you block BL after remplace original recovery for twrp?
I comment to see if you are in the same case as us
cheers
Click to expand...
Click to collapse
I had the bootloader unlocked but the phone was dead and when I connected it to the computer I recognized it but did not give image or anything
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
I had the bootloader unlocked but the phone was dead and when I connected it to the computer I recognized it but did not give image or anything
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
yur case its diferent, you should enter in fast mode an re flash room and ready. your case it is not a brick!
Isavar said:
yur case its diferent, you should enter in fast mode an re flash room and ready. your case it is not a brick!
Click to expand...
Click to collapse
Lol I was not allowed to enter anything the phone was dead, or do not understand, the phone was dead for 4 hours without turning on and without anything, although it will connect to the PC appeared on it but the Phone did not turn on or anything
Enviado desde mi RMX1931 mediante Tapatalk
Anyone find a way to unbrick this phone yet?
Hi all It seems that offline charging is broken in Evolution X n others GSI...I had to wait like 8 hours to revive ??
---------- Post added at 11:51 AM ---------- Previous post was at 11:33 AM ----------
Sergiocubano1 said:
Lol I was not allowed to enter anything the phone was dead, or do not understand, the phone was dead for 4 hours without turning on and without anything, although it will connect to the PC appeared on it but the Phone did not turn on or anything
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Ty bro n u r Cubano from Clan GSM ??
Hi! Did you found any working solution @whyphyrl?
I'm having the same issue, the bootloop on the first screen.
Manage to enter edl mode for a quick time, before it starts to charge again, but I can't find a flash tool.
Hope to hear from someone soon. Thanks! : )
---------- Post added at 09:35 AM ---------- Previous post was at 09:35 AM ----------
Hi! Have you found any working solution @whyphyrl?
I'm having the same issue, the bootloop on the first screen.
Manage to enter edl mode for a quick time, before it starts to charge again, but I can't find a flash tool.
Hope to hear from someone soon. Thanks! : )
I send it to an service center thex fixed it for free now its working