Hey guys after doing stupid this i ended up with an locked bootloader and and boot loop with (The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it. ).
now i can only access to the phone in edl mode
atm im searching for ways to flash a rom in that edl mode but its difficult
so i need ur help guys
whyphyrl said:
Hey guys after doing stupid this i ended up with an locked bootloader and and boot loop with (The current image (boot/recovery) have been destroyed and can not boot. Please flash the correct image or contact customer service to fix it. ).
now i can only access to the phone in edl mode
atm im searching for ways to flash a rom in that edl mode but its difficult
so i need ur help guys
Click to expand...
Click to collapse
it is simple to put the mode in bootloader, then flash the recovery of mauronfrio and from there you install the rom that you are going to put, then start and the mobile will go to you
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
it is simple to put the mode in bootloader, then flash the recovery of mauronfrio and from there you install the rom that you are going to put, then start and the mobile will go to you
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
no i cant get into any bootloader or fastboot or recovery only thing that works is pressing vol+ and power for some sec then its blackscreen and its shows me connected as Qualcomm HS- USB QDLoader 9008(COM3)
whyphyrl said:
no i cant get into any bootloader or fastboot or recovery only thing that works is pressing vol+ and power for some sec then its blackscreen and its shows me connected as Qualcomm HS- USB QDLoader 9008(COM3)
Click to expand...
Click to collapse
ok that happens you have to leave it about 4 hours without doing anything and then it will work for you alone, it happened to me and looking for I saw that it is like a mistake they have to protect themselves and they are deactivated for a few hours, do not connect it or try to turn it on or anything, set it aside for about four hours and then try
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
ok that happens you have to leave it about 4 hours without doing anything and then it will work for you alone, it happened to me and looking for I saw that it is like a mistake they have to protect themselves and they are deactivated for a few hours, do not connect it or try to turn it on or anything, set it aside for about four hours and then try
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Hi
I'm in the same problem, you also blocked the BL and the same thing happened to you? Then leave it for approx. 4 hours and can I enter the FB?
Sergiocubano1 said:
ok that happens you have to leave it about 4 hours without doing anything and then it will work for you alone, it happened to me and looking for I saw that it is like a mistake they have to protect themselves and they are deactivated for a few hours, do not connect it or try to turn it on or anything, set it aside for about four hours and then try
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
sounds very weird to me but ill give it a try
it didn't work for me
Isavar said:
it didn't work for me
Click to expand...
Click to collapse
You have left it almost four hours and then you have tried to turn on and arrange the charging cable, connect it and then press and hold on + vol + to see if it turns you on that way, I already tell you I had scared for almost 5 hours until without anything else property and look for information and it happens in all are blocked and you have to wait a good while, although the computer recognizes you as a device, he doesn't give an image
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
You have left it almost four hours and then you have tried to turn on and arrange the charging cable, connect it and then press and hold on + vol + to see if it turns you on that way, I already tell you I had scared for almost 5 hours until without anything else property and look for information and it happens in all are blocked and you have to wait a good while, although the computer recognizes you as a device, he doesn't give an image
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
didnt worked for me to
whyphyrl said:
didnt worked for me to
Click to expand...
Click to collapse
Connect the cable and try to light it by pressing the volu + and turning on
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Connect the cable and try to light it by pressing the volu + and turning on
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
yeah then im in edl mode or whats it called
whyphyrl said:
yeah then im in edl mode or whats it called
Click to expand...
Click to collapse
Normally it is to enter the recovery, but they say that this is revived
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
Connect the cable and try to light it by pressing the volu + and turning on
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
not working, do you block BL after remplace original recovery for twrp?
I comment to see if you are in the same case as us
cheers
Isavar said:
not working, do you block BL after remplace original recovery for twrp?
I comment to see if you are in the same case as us
cheers
Click to expand...
Click to collapse
I had the bootloader unlocked but the phone was dead and when I connected it to the computer I recognized it but did not give image or anything
Enviado desde mi RMX1931 mediante Tapatalk
Sergiocubano1 said:
I had the bootloader unlocked but the phone was dead and when I connected it to the computer I recognized it but did not give image or anything
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
yur case its diferent, you should enter in fast mode an re flash room and ready. your case it is not a brick!
Isavar said:
yur case its diferent, you should enter in fast mode an re flash room and ready. your case it is not a brick!
Click to expand...
Click to collapse
Lol I was not allowed to enter anything the phone was dead, or do not understand, the phone was dead for 4 hours without turning on and without anything, although it will connect to the PC appeared on it but the Phone did not turn on or anything
Enviado desde mi RMX1931 mediante Tapatalk
Anyone find a way to unbrick this phone yet?
Hi all It seems that offline charging is broken in Evolution X n others GSI...I had to wait like 8 hours to revive ??
---------- Post added at 11:51 AM ---------- Previous post was at 11:33 AM ----------
Sergiocubano1 said:
Lol I was not allowed to enter anything the phone was dead, or do not understand, the phone was dead for 4 hours without turning on and without anything, although it will connect to the PC appeared on it but the Phone did not turn on or anything
Enviado desde mi RMX1931 mediante Tapatalk
Click to expand...
Click to collapse
Ty bro n u r Cubano from Clan GSM ??
Hi! Did you found any working solution @whyphyrl?
I'm having the same issue, the bootloop on the first screen.
Manage to enter edl mode for a quick time, before it starts to charge again, but I can't find a flash tool.
Hope to hear from someone soon. Thanks! : )
---------- Post added at 09:35 AM ---------- Previous post was at 09:35 AM ----------
Hi! Have you found any working solution @whyphyrl?
I'm having the same issue, the bootloop on the first screen.
Manage to enter edl mode for a quick time, before it starts to charge again, but I can't find a flash tool.
Hope to hear from someone soon. Thanks! : )
I send it to an service center thex fixed it for free now its working
Related
Hi all,
I recently switched to Sprint and I had purchased a Moto X for my wife via Swappa. The user said the phone was rooted and I didn't think anything of it at the time. When I received it, I went to the store and had it activated. I gave it to my wife, who told me that she accepted a software update and the phone now is stuck in a reboot loop.
I tried doing a factory reset, but the phone starts to reset despite me speeding through the menus to hit factory reset. The best thing I've been able to manage so far is to get the phone in the "Fastboot Flash Mode" menu. From there I tried selecting "Recovery" but that just brings the phone back on and continues the reboot cycle.
I downloaded the Motorola drivers and the Android SDK hoping that somehow I could connect via USB to the device, but I don't know how to interface with the phone from there. I can't get through the menus fast enough to check the status of USB debugging (although if the phone had been rooted, this should be enabled I would think). I tried going to the command line and running 'fastboot erase cache' but I get an unrecognized command error. Of course, I'm running this while in the Windows directory because I can't find how to point my command line at the Moto X. In Control Panel there is a device called "fastboot ghost S" but I can't do anything with it.
What can I try from here to break the reboot cycle? Apologies for lack of know-how, and thanks in advance!
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Enviado desde mi XT1053 mediante Tapatalk
Joseluize said:
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
Enviado desde mi XT1053 mediante Tapatalk
Click to expand...
Click to collapse
Well I wasn't sure whether these steps would help, but thankfully, it appears that once is used the RSD Lite application I was able to start talking to the phone. Reflashed, everything seems good. Thanks!
Your welcome!
Enviado desde mi XT1053 mediante Tapatalk
I need help
theprof23 said:
I need help
Click to expand...
Click to collapse
Give more information, i dont understand
Enviado desde mi Moto X mediante Tapatalk
theprof23 said:
I need help
Click to expand...
Click to collapse
install adb and fastboot. connect your phone. open cmd where fastboot has been installed and type fastboot reboot
Hı all. My phone has global stable rom.I want to unlock.but as ı heard need to chine developer rom.how can I doğru this. With edl mode? İf only edl mode need edl cable ?
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
cheleby said:
Hı all. My phone has global stable rom.I want to unlock.but as ı heard need to chine developer rom.how can I doğru this. With edl mode? İf only edl mode need edl cable ?
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
There is no need of Chinese ROM or edl mode. You can unlock your device with global stable ROM. Just follow these steps.
1. First request for unlock permission from here
2. Wait for the permission to arrive.
3. Connect your device in fastboot mode. And unlock.
cheleby said:
Hı all. My phone has global stable rom.I want to unlock.but as ı heard need to chine developer rom.how can I doğru this. With edl mode? İf only edl mode need edl cable ?
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
Click to expand...
Click to collapse
Unless they've changed things you need a developer rom to unlock. If you're on Global Stable download the latest Global Developer rom and use the Updater app to install it (three dots - choose package to install). It will wipe your phone.
Laurencito said:
Unless they've changed things you need a developer rom to unlock. If you're on Global Stable download the latest Global Developer rom and use the Updater app to install it (three dots - choose package to install). It will wipe your phone.
Click to expand...
Click to collapse
Hı again. I solved with below
)*Settings---> About phone---> MIUI Version (Tap on it to enable developer option), this option is available in MIUI 8.1 onwards.*After you've enabled developer option then head towards:
Settings---> Additional settings---> Developer option and bind your approved Mi account under Mi Unlock Status.
2. Log into the Mi account which has acquired unlocking permission on your device
3. Turn off your device, press the Power button and Volume - button at the same time to enter bootloader mode*
4. Log into the unlocking tool on PC with the same Mi account. Connect the device with the PC using USB cable
5. Press 'Unlock'. The unlocking process will complete in about 10 seconds
MI 5 cihazımdan Tapatalk kullanılarak gönderildi
I tried converting my A2 to the 6X model and something went wrong. My phone is not recognized by fastboot and I can not go into EDL cause of that
I managed to get into EDL with the "check point" method
Did you tried to enter EDL mode with button combination?
Sent from my MI 6X using Tapatalk
Mr.Nice.ba said:
Did you tried to enter EDL mode with button combination?
Sent from my MI 6X using Tapatalk
Click to expand...
Click to collapse
Whats the button combination?
Here is the link:
https://www.smartphones.how/repair/edl-mode
Sent from my MI 6X using Tapatalk
Mr.Nice.ba said:
Here is the link:
https://www.smartphones.how/repair/edl-mode
Sent from my MI 6X using Tapatalk
Click to expand...
Click to collapse
I wish I could do the one in which I need to turn off the phone and press volume up and the power button but there's no way i can turn off my phone :/
Press and hold power button for longer period, your phone will reboot for sure.
Sent from my MI 6X using Tapatalk
Mr.Nice.ba said:
Press and hold power button for longer period, your phone will reboot for sure.
Sent from my MI 6X using Tapatalk
Click to expand...
Click to collapse
That didn't work. Tried it earlier. I just cant get it to boot to EDL :/
How you solved this problem?
Try with edl cable
asiranno said:
I tried converting my A2 to the 6X model and something went wrong. My phone is not recognized by fastboot and I can not go into EDL cause of that
I managed to get into EDL with the "check point" method
Click to expand...
Click to collapse
Enviado desde mi Mi A2 mediante Tapatalk
asiranno said:
I tried converting my A2 to the 6X model and something went wrong. My phone is not recognized by fastboot and I can not go into EDL cause of that
I managed to get into EDL with the "check point" method
Click to expand...
Click to collapse
Hi! I have the same problem. Did u flashed 6X rom or A2 stock rom? I don't want to hardbrick (again) my device.
crisagler said:
Hi! I have the same problem. Did u flashed 6X rom or A2 stock rom? I don't want to hardbrick (again) my device.
Click to expand...
Click to collapse
I flashed stock MI A2 rom
My Mi6x went into bootloop all of a sudden (mi logo turning on and off). I tried wiping data from Mi recovery but it doesn't work the problem persists. How do I fix this? My bootloader is locked and usb debugging is off. Please someone help me out with a solution. Thank You.
musfiqahmed said:
My Mi6x went into bootloop all of a sudden (mi logo turning on and off). I tried wiping data from Mi recovery but it doesn't work the problem persists. How do I fix this? My bootloader is locked and usb debugging is off. Please someone help me out with a solution. Thank You.
Click to expand...
Click to collapse
search EDL
KevMetal said:
search EDL
Click to expand...
Click to collapse
Can I use edl test point method without an authorized mi account?
musfiqahmed said:
Can I use edl test point method without an authorized mi account?
Click to expand...
Click to collapse
yeah you just need patched files ...use this
https://miui.blog/mi-6x/unbrick-mi-6x-wayne