Related
:crying::crying: i hve rooted my moto .. i got OTA update ..i have downloaded and when its installing..my mobile is restarting often and its taking me to #Recoverymod plzz help ..or i have to restore bootloader ?? plzz reply fast :crying::crying::crying:
after installing stock recovery u can update your phone but if you modified any file in system it will fail to update just revert any changes in system partition before updating.no need to look bootloader
amith51 said:
:crying::crying: i hve rooted my moto .. i got OTA update ..i have downloaded and when its installing..my mobile is restarting often and its taking me to #Recoverymod plzz help ..or i have to restore bootloader ?? plzz reply fast :crying::crying::crying:
Click to expand...
Click to collapse
Do you remember the version of OTA received? when did you receive it? I also came to know from Motorola Forums that an update is planned to be released to India users today morning IST. Didn't see any notification yet.
Just wondering if I may have missed it!!
amith51 said:
:crying::crying: i hve rooted my moto .. i got OTA update ..i have downloaded and when its installing..my mobile is restarting often and its taking me to #Recoverymod plzz help ..or i have to restore bootloader ?? plzz reply fast :crying::crying::crying:
Click to expand...
Click to collapse
*facepalm .. You never take an ota update if you have a custom recovery,it'll cause a bootloop of death.
Moto G OTA latest
I have successfully updated my moto g this morning to the latest well now my phone is receiving 3G signals too
Is u mobile r0oted ? ..and u have custom recovery i guess ..how u installed it ?
If you modify any system partition it will fail to update the latest patch ota so here is how you should do.. If any system apps is deleted well you have to put it back all the apps inside system partition with right permission then flash stock boot.img and stockrecovery.img then ota update will work..
amith51 said:
Is u mobile r0oted ? ..and u have custom recovery i guess ..how u installed it ?
Click to expand...
Click to collapse
I was unable to update the phone and it bootlooped continuously... Just cleared the cache from the twrp and went back to using the 21.11.14 version...
Think I can live with that version. For now...
Sent from my XT1068 using XDA Free mobile app
I flashed cm12 on my phone and now the super su doesnt work. It say needs binanry updated ..when i say ok it fails ...what do in ed to od to make it work . Please help
darshilshah87 said:
I flashed cm12 on my phone and now the super su doesnt work. It say needs binanry updated ..when i say ok it fails ...what do in ed to od to make it work . Please help
Click to expand...
Click to collapse
which version of supersu did you flash? i believe v2.44 is the latest http://download.chainfire.eu/693/SuperSU/BETA-SuperSU-v2.44.zip
I am pretty new to this. I just downloaded the app.... online .. isnt that what i am supposed to do... I am sorry but i am dumbo with android(rooting and flasing and stuff)
darshilshah87 said:
I am pretty new to this. I just downloaded the app.... online .. isnt that what i am supposed to do... I am sorry but i am dumbo with android(rooting and flasing and stuff)
Click to expand...
Click to collapse
yes, but you can download old versions online. some old versions are way too old for lollipop. try flashing the one in the link i provided. download it via your phone, boot into recovery after its downloaded, then flash it and reboot
Thanks brother
darshilshah87 said:
Thanks brother
Click to expand...
Click to collapse
youre welcome!
flash it, let me know if you are ok, and ask any other questions you might have(ill probably answer them)
simms22 said:
youre welcome!
flash it, let me know if you are ok, and ask any other questions you might have(ill probably answer them)
Click to expand...
Click to collapse
IT WORKS DUDE ........ YOU THE MAN !!! I thought i ****ed up my phone man.... its like when i write java code and **** wont work cuz i havent imported the damn class
darshilshah87 said:
IT WORKS DUDE ........ YOU THE MAN !!! I thought i ****ed up my phone man.... its like when i write java code and **** wont work cuz i havent imported the damn class
Click to expand...
Click to collapse
CM has root disabled by default I believe. If you download the SuperSU app when you're not rooted, you cannot install the binaries because the binaries go in /system which needs root to modify and its the binaries that make root possible. Kind of a catch ²²
When you flash the binaries from recovery to /system, you don't need root because root is only applicable to android, which isn't running when you're in recovery.
Hope this helps
I found simple fix.
just flash CB 7 firmware and modem throuth twrp.
https://www.androidfilehost.com/?fid=457095661767116249
First flash this file and then Rom. That's right?? Or its other way around
karan khara said:
First flash this file and then Rom. That's right?? Or its other way around
Click to expand...
Click to collapse
If u have dm verity error on boot. Just flash it..
Wouldn't this procedure downgrade some performance on the device?
Giocarro said:
Wouldn't this procedure downgrade some performance on the device?
Click to expand...
Click to collapse
No..
Can I flash CB 7 firmware and modem through USB-otg using twrp....I'm on CB9...my phone is encrypted
Nitesh13 said:
Can I flash CB 7 firmware and modem through USB-otg using twrp....I'm on CB9...my phone is encrypted
Click to expand...
Click to collapse
Yes u can..
Firmware is MM-based, can you flash this after you installed beta 9, because this is N-based?
cool.boy said:
I found simple fix.
just flash CB 7 firmware and modem throuth twrp.
https://www.androidfilehost.com/?fid=457095661767116249
Click to expand...
Click to collapse
Nice but what do you fix. If it is only a message that is displayed at boot but has no negative effects what is the point of fixing.
In my opinion using firmware and modem from mm for n can't be a good match or let's say better.
I have no DM verity error and I have cb9 firmware and rooted
Sent from my OnePlus 3 using XDA Labs
Why would you want to flash old firmware and modem, not made for this ROM, just to get rid of a pointless message?
Especially when there are other methods to fix this so called issue ...
Sent from my OnePlus 3 using Tapatalk
puschkin said:
Firmware is MM-based, can you flash this after you installed beta 9, because this is N-based?
Click to expand...
Click to collapse
Yes..
snippem said:
Nice but what do you fix. If it is only a message that is displayed at boot but has no negative effects what is the point of fixing.
In my opinion using firmware and modem from mm for n can't be a good match or let's say better.
Click to expand...
Click to collapse
Its a bug related cb9 firmware. U can use cb7 firmaware to fix it..
This makes sense. I was on open beta 8 for a few days
When I stumble across open beta 8 firmware + modem, I flashed it. Phone was working without issues prior to that, so I dont know what possessed me to do that because after that I began receiving dmverity message right after bootloader warning. I immediately knew it had to be the updated firmware/modem. Unfortunately I was unable to access twrp anymore. I ended up bricking my phone trying to revert this issue lol all is good now. I suggest you do not update to any firmware/moden newer than cb 7.
cool.boy said:
Its a bug related cb9 firmware. U can use cb7 firmaware to fix it..
Click to expand...
Click to collapse
it's not a bug…just another warning for modified partitions.
No need to be "fixed" and don't think using mm firmware to replace n's is a good choice
cool.boy said:
Its a bug related cb9 firmware. U can use cb7 firmaware to fix it..
Click to expand...
Click to collapse
cesar.mk4 said:
This makes sense. I was on open beta 8 for a few days
When I stumble across open beta 8 firmware + modem, I flashed it. Phone was working without issues prior to that, so I dont know what possessed me to do that because after that I began receiving dmverity message right after bootloader warning. I immediately knew it had to be the updated firmware/modem. Unfortunately I was unable to access twrp anymore. I ended up bricking my phone trying to revert this issue lol all is good now. I suggest you do not update to any firmware/moden newer than cb 7.
Click to expand...
Click to collapse
dlhxr said:
it's not a bug…just another warning for modified partitions.
No need to be "fixed" and don't think using mm firmware to replace n's is a good choice
Click to expand...
Click to collapse
Exactly I believe there is no point in flashing old firmware only if you can't wait for 5 sec.
If this was a bug oneplus would have pushed a patch out by now.
snippem said:
Exactly I believe there is no point in flashing old firmware only if you can't wait for 5 sec.
If this was a bug oneplus would have pushed a patch out by now.
Click to expand...
Click to collapse
I absolutely agree. 5 seconds more isnt a big deal. But why was I unable to access twrp?
cesar.mk4 said:
I absolutely agree. 5 seconds more isnt a big deal. But why was I unable to access twrp?
Click to expand...
Click to collapse
I never had that till now only after flash does not reboot.
In my opinion it is more a twrp incompatibility that will be resolved when N sources are out by oneplus
snippem said:
Exactly I believe there is no point in flashing old firmware only if you can't wait for 5 sec.
If this was a bug oneplus would have pushed a patch out by now.
Click to expand...
Click to collapse
Don't even need to wait, just press the power button to skip it (same applies to first bootloader unlocked message).
Sent from my OnePlus 3 using Tapatalk
it's easily avoidable (but the phone will be decrypted)
after flashing ob9 successfully and booting to system, reboot to TWRP (.28) and wipe convert data to f2fs then wipe it, then wipe internal storage (back up your data to your pc 1st)...and that's it, if you want root, reboot back to TWRP and flash root, then roboot to system, dmverity will be gone, and the phone decrypted,
(this will work if you started with a clean ob9 install like sideloading, and you ended with a full stock ob9)
hi guys i have a friend who had tried to root the huawei p8 lite 2017 with this guide,https://newesc.com/root-al-huawei-p8-lite-2017/ , he have this version of the firmware pra-lx1c55b105 after the flash of this kernel for the root , the phone is gone to a bootloop so my friend it's entered to the recovery and than wiped all and the phone works again , the phone had the root but he have a lot of problem if i go to the developer mode and try to open it comes a blank page and than he retun to the setting the same thing appear when i try to open the setting to enable the unkown source for the app, and the last problem is who he can't uninstall the app after installed , the only way to unistall is with titanium backup but the phone force reboot when it uninstall it .... so anyone had this problem? how i need to solve ? i really need a help for him , sorry for my bad english but i'm italian
halfboss said:
hi guys i have a friend who had tried to root the huawei p8 lite 2017 with this guide,https://newesc.com/root-al-huawei-p8-lite-2017/ , he have this version of the firmware pra-lx1c55b105 after the flash of this kernel for the root , the phone is gone to a bootloop so my friend it's entered to the recovery and than wiped all and the phone works again , the phone had the root but he have a lot of problem if i go to the developer mode and try to open it comes a blank page and than he retun to the setting the same thing appear when i try to open the setting to enable the unkown source for the app, and the last problem is who he can't uninstall the app after installed , the only way to unistall is with titanium backup but the phone force reboot when it uninstall it .... so anyone had this problem? how i need to solve ? i really need a help for him , sorry for my bad english but i'm italian
Click to expand...
Click to collapse
IDEM!! COMPLETELY IDEM! I had the pra-lx1c55b105 too, and, after root, I have your same problems too! Please, someone help us!!!
nobody read the multiple thread about this problem ?
Sorry but it's really annoying. (it's not about you, nothing personnal
Your problem is related to a different version between the boot_root image and, the system partition...
You could try to update your phone to the latest firmware (so you have to configure the wifi and then check in the "about" page for an update)
If an update if available, then I think this will solve your problem.
And be very carefull, never install (apk or worse, flash a partition ) something if no version is specified
My friend had maked the update over Wi-Fi but after the download the flash in the recovery fails, why ? @ripp2003 can you link me where la located this theard ? Thanks a lot
halfboss said:
My friend had maked the update over Wi-Fi but after the download the flash in the recovery fails, why ? @ripp2003 can you link me where la located this theard ? Thanks a lot
Click to expand...
Click to collapse
https://forum.xda-developers.com/p8lite/p8-lite-2017-discussion/how-to-root-huawei-p8-lite-2017-android-t3582179
But this topic is related to PR1-LX1C432B110 and this is the source of newesc.... (this topic got a lot of informations on how to find your firmware)
So right now, you need the exact version of the firmware : I think it's pra-lx1c55b105
-> Find it and download it with Huawei Firmware Finder
-> Extract the boot.img from the firmware with Huawei Firmware Extractor (or maybe you've done a copy before flash the boot_root.img ?)
-> fastboot flash boot boot.img
You 'll lost root but this way, I think you can recover your phone
If this doesnt work, I'm really sorry but, you have to wait for some developpers to make Rom....or, some special things for recover an official firmware.
I'm sorry, this situation is a bullsh**
Really Good luck
@ripp2003 thanks a lot, i had tell this to my friend and Now He try
@ripp2003 bad news after the flash of the kernel rom the Phone is soft bricked , it appears the tim logo than reboot in recovery , He has tried to flash the full rom from the recovery but only install failed
halfboss said:
@ripp2003 bad news after the flash of the kernel rom the Phone is soft bricked , it appears the tim logo than reboot in recovery , He has tried to flash the full rom from the recovery but only install failed
Click to expand...
Click to collapse
Even after doing a full wipe whith manual calling recovery ?
ripp2003 said:
nobody read the multiple thread about this problem ?
Sorry but it's really annoying. (it's not about you, nothing personnal
Your problem is related to a different version between the boot_root image and, the system partition...
You could try to update your phone to the latest firmware (so you have to configure the wifi and then check in the "about" page for an update)
If an update if available, then I think this will solve your problem.
And be very carefull, never install (apk or worse, flash a partition ) something if no version is specified
Click to expand...
Click to collapse
ripp2003 said:
Even after doing a full wipe whith manual calling recovery ?
Click to expand...
Click to collapse
Manual calling recovery?
Recovery: Vol. + and power without PC connection
Then you can make a full wipe, try this
ripp2003 said:
https://forum.xda-developers.com/p8lite/p8-lite-2017-discussion/how-to-root-huawei-p8-lite-2017-android-t3582179
But this topic is related to PR1-LX1C432B110 and this is the source of newesc.... (this topic got a lot of informations on how to find your firmware)
So right now, you need the exact version of the firmware : I think it's pra-lx1c55b105
-> Find it and download it with Huawei Firmware Finder
-> Extract the boot.img from the firmware with Huawei Firmware Extractor (or maybe you've done a copy before flash the boot_root.img ?)
-> fastboot flash boot boot.img
You 'll lost root but this way, I think you can recover your phone
If this doesnt work, I'm really sorry but, you have to wait for some developpers to make Rom....or, some special things for recover an official firmware.
I'm sorry, this situation is a bullsh**
Really Good luck
Click to expand...
Click to collapse
The problem is to find it... On the internet I can't find anything, and on firmware finder too. I need the stock PRA-LX1C55B105 firmware (especially the boot.img) but the problem is to find it. I can't find it anywhere!!!
Please help
I Think what firmware finder isn't really good, someone know another method to download firmware or part of firmware like the boot.img?
halfboss said:
I Think what firmware finder isn't really good, someone know another method to download firmware or part of firmware like the boot.img?
Click to expand...
Click to collapse
I think it's this one, the Prague-L11C55B105
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v75035/f1/full/update.zip
ripp2003 said:
I think it's this one, the Prague-L11C55B105
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1458/g104/v75035/f1/full/update.zip
Click to expand...
Click to collapse
I'm not enough brave to risk the death of my device... Are you sure this is good for my device?
Manuele1000 said:
I'm not enough brave to risk the death of my device... Are you sure this is good for my device?
Click to expand...
Click to collapse
If your phone is softbrick, you could try but, I can't tell you this will work at 100%
With this new phone, we actually try a lot of things to see what happened and..... we are now all beta testers lol
I'm sorry but I can't promise you anything : this si what I've found with Huawei firmare finder so source is OK but like I sait : the version is Prague-L11C55B105 and the firmware is full OTA
My is pra-lx1c55b105
I have the same problem as Napoli.
I will try the Prague-L11C55B105 and I will let you know what hapend...
krousnik said:
My is pra-lx1c55b105
I have the same problem as Napoli.
I will try the Prague-L11C55B105 and I will let you know what hapend...
Click to expand...
Click to collapse
Yeah, thank you!! Let me know if you can boot the phone with that stock kernel, and if security and developper options works. Try the Webcam and the music player too, thank you!
Manuele1000 said:
Yeah, thank you!! Let me know if you can boot the phone with that stock kernel, and if security and developper options works. Try the Webcam and the music player too, thank you!
Click to expand...
Click to collapse
OMG!!! It worked! The phone booted with the stock kernel.
---------- Post added at 02:18 AM ---------- Previous post was at 02:14 AM ----------
Music player is working, camera also working... its back on pra-lx1c55b105.
krousnik said:
OMG!!! It worked! The phone booted with the stock kernel.
---------- Post added at 02:18 AM ---------- Previous post was at 02:14 AM ----------
Music player is working, camera also working... its back on pra-lx1c55b105.
Click to expand...
Click to collapse
Oh my God yeah!! Today afternoon I will try it! So, works everything? Security and developper options too? Yeah bro, very thank you!!
-------------------------------------
Can you tell me what you did? You flashed the entire zip, or only the boot.img? And how? With twrp right?
Yes everything works. I did factory reset and the phone is back to default.
I extracted BOOT image and RECOVERY image with HuaweiUpdateExtractor.
After that with I copied both BOOT and RECOVERY image in Minimal ADB and Fastboot folder.
At last I've connected the phone to PC and flashed BOOT and RECOVERY image.
I've disconnected the phone booted in recovery did factory reset and after that phone booted normally.
my mobile is che2-l11 marshmello and rooted with magisk then i separated sd card to ext4 and exfat then download app2sd the problem and the fault is that i link system apps to externel so it restart alone and then go to stuck at honor logo only pls anyone have an idea assist me
Kireto00 said:
my mobile is che2-l11 marshmello and rooted with magisk then i separated sd card to ext4 and exfat then download app2sd the problem and the fault is that i link system apps to externel so it restart alone and then go to stuck at honor logo only pls anyone have an idea assist me
Click to expand...
Click to collapse
It might be best to re-install your firmware. Also why did you linked system apps?
Your explanation is bit difficult to understand, could you maybe give a more detailed explanation or would you want step by step guide to help you with rooting and configurating apps2sd? You seem to be having lot of problems with getting apps2sd working as wanted.
keikari said:
It might be best to re-install your firmware. Also why did you linked system apps?
Your explanation is bit difficult to understand, could you maybe give a more detailed explanation or would you want step by step guide to help you with rooting and configurating apps2sd? You seem to be having lot of problems with getting apps2sd working as wanted.
Click to expand...
Click to collapse
i am already rooted and have twrp working and i wipe every thing as u say then i do all ur replys but it not working but i do all with marshmello update.app only might i try with kitkat ?? thait marshmello might be corrupt as u say ??
Kireto00 said:
i am already rooted and have twrp working and i wipe every thing as u say then i do all ur replys but it not working but i do all with marshmello update.app only might i try with kitkat ?? thait marshmello might be corrupt as u say ??
Click to expand...
Click to collapse
To get past honor logo you need to re-install whole firmware, because most likely system partition has something that prevents boot or boot partition has problem.
I'm using marsmallow and Apps2SD works normally for me. I don't think it matters which version you are using, but getting back to kitkat might be difficult.
keikari said:
To get past honor logo you need to re-install whole firmware, because most likely system partition has something that prevents boot or boot partition has problem.
I'm using marsmallow and Apps2SD works normally for me. I don't think it matters which version you are using, but getting back to kitkat might be difficult.
Click to expand...
Click to collapse
u can tell me what i must do now and i will do ........ but i wipe all thing on sd card and system its say no os found as no system found so what i do i think kitkat it will not be difficult because as no system is in software
Kireto00 said:
u can tell me what i must do now and i will do ........ but i wipe all thing on sd card and system its say no os found as no system found so what i do i think kitkat it will not be difficult because as no system is in software
Click to expand...
Click to collapse
I've read from somewhere that it isn't as easy as it looks like(though I haven't tested it myself). I think it's because there are partitions which you can't flash in fastboot and the "updateflasher.zip" thread says that method only works on android LP and MM.
I can guide you with apps2sd, but if you root with magisk I can't help if problem is somehow related to it since I have never used it.
keikari said:
I've read from somewhere that it isn't as easy as it looks like(though I haven't tested it myself). I think it's because there are partitions which you can't flash in fastboot and the "updateflasher.zip" thread says that method only works on android LP and MM.
I can guide you with apps2sd, but if you root with magisk I can't help if problem is somehow related to it since I have never used it.
Click to expand...
Click to collapse
u mean that u dont know what to do now ??
Kireto00 said:
u mean that u dont know what to do now ??
Click to expand...
Click to collapse
No, I meant to say that you should install firmware you want, and any root method you want. And then your device should boot normally.
keikari said:
No, I meant to say that you should install firmware you want, and any root method you want. And then your device should boot normally.
Click to expand...
Click to collapse
ok i need the method ??
Kireto00 said:
ok i need the method ??
Click to expand...
Click to collapse
Well I prefer this method https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 chapter 8 is rootin.
Actually needed steps are:
1. Flash 1.zip
2. Flash SuperSu.zip can be found from here https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
3. Make sure it says "installing mode system-less" or something similiar.
4. Reboot your phone. It will boot loop once or twice and then works normally.
Then I can help you with apps2sd if you still want.
keikari said:
Well I prefer this method https://forum.xda-developers.com/p8lite/general/mega-thread-root-unbricking-updating-t3400994 chapter 8 is rootin.
Actually needed steps are:
1. Flash 1.zip
2. Flash SuperSu.zip can be found from here https://forum.xda-developers.com/apps/supersu/stable-2016-09-01supersu-v2-78-release-t3452703
3. Make sure it says "installing mode system-less" or something similiar.
4. Reboot your phone. It will boot loop once or twice and then works normally.
Then I can help you with apps2sd if you still want.
Click to expand...
Click to collapse
i am honor 4x this is the first then there is no system for my device i delete it its says no os installed when i boot so i need a method to instal a new frimware not rooting it
Kireto00 said:
i am honor 4x this is the first then there is no system for my device i delete it its says no os installed when i boot so i need a method to instal a new frimware not rooting it
Click to expand...
Click to collapse
Oh my bad I thought you already knew about this but here https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
You can also use it to install p8lite rom which has EMUI 4.1 if you want. Though you can't use OTG feature then. There seems to be fix posted for it, but it didn't work for me.
keikari said:
Oh my bad I thought you already knew about this but here https://forum.xda-developers.com/honor-4x/how-to/install-emui-4-1-4x-4c-g-play-g-play-t3515702
You can also use it to install p8lite rom which has EMUI 4.1 if you want. Though you can't use OTG feature then. There seems to be fix posted for it, but it didn't work for me.
Click to expand...
Click to collapse
i use this method for marshmello and dont work
Kireto00 said:
i use this method for marshmello and dont work
Click to expand...
Click to collapse
Can you tell exactly what you did, also which firmware you are installing like b310 or b360. And what error did it gave you. I've used this method a lot to fix my phone when done something wrong and always worked without problem.
keikari said:
Can you tell exactly what you did, also which firmware you are installing like b310 or b360. And what error did it gave you. I've used this method a lot to fix my phone when done something wrong and always worked without problem.
Click to expand...
Click to collapse
ok now i separate my sd card as well known then i link system apps so when i restart there is no system to boot to it so it stuck at honor logo so i want a method in a step by step to repair it....the error is
E: could not extract ' meta.inf /com/google/android /update-binary
error installing zip file '/externel -sd / lost.dir / meta.inf zip
with red colour
my base is marshmello
Kireto00 said:
ok now i separate my sd card as well known then i link system apps so when i restart there is no system to boot to it so it stuck at honor logo so i want a method in a step by step to repair it....the error is
E: could not extract ' meta.inf /com/google/android /update-binary
error installing zip file '/externel -sd / lost.dir / meta.inf zip
with red colour
my base is marshmello
Click to expand...
Click to collapse
Can you give link to where you downloaded your firmware and which version it was? This is very weird because no one else hasn't has problem like that.
keikari said:
Can you give link to where you downloaded your firmware and which version it was? This is very weird because no one else hasn't has problem like that.
Click to expand...
Click to collapse
the problem he got because the meta-inf folder is corrupt.]
miststudent2011 said:
the problem he got because the meta-inf folder is corrupt.
Click to expand...
Click to collapse
I guess he should then try to re-download updateflasher.zip. Right?
keikari said:
I guess he should then try to re-download updateflasher.zip. Right?
Click to expand...
Click to collapse
Yes he should do it.
He was having unstable internet connection previously while he requested my help.
@Kireto00
redownload the zip file from the link i provided now and repeat the process ie.., unpacking and repacking the two zip files and give a try.
I strongly believe that either the zip downloaded is corrupt or while rezipping the file you might have faced the error.