Related
Hi guys!
I yesterday flashed my mi3 with miui 8 v6.7.21 it was flashed successfully and when I swiped for reboot it never started....:crying:
I pluged it to charger for like for like 3-4 hrs even the light was not blinking, after some time i connected phone to laptop to see if it could be flashed but i was suprised that my phone showed all the partitions of the phoneI accidently formatted all of them now I am unable to boot... as every thing is formatted is there any thing with which I can recover
Please help:crying:
Download MI flash tool and the latest miui 8 rom for MI 3
Boot your phone into fastboot mode by pressing volume down and power button together
Open Mi flash tool and connect your phone to computer
Browse to the rom package you downloaded
Select your device and click flash
Official guide from MIUI-http://en.miui.com/a-234.html
Hello everyone,
It seems that my worst nightmares came up, and got my device bricked while trying to flash it to a stock ROM (had a custom multilingual ROM installed by the chinese seller), and now it's in a strange stage, as Windows detects the Qualcomm port, but adb can't see it.
The adb devices list is in blank, and QPST detects everything, but when trying to flash the device, the error message on the screenshot appears.
Also tried to do it with MiFlash, but didn't worked too.
Any idea about how to solve this?
Thank you in advance for your help.
P.D.: My device is in black screen, so no menu or anything.
P.D.2: Already downloaded the Android SDK in order to try it's ADB, but it didn't worked too.
Now after some research, I found out that the "ADB interface" is not showing in Windows device manager
I tried to install it manually, but can't find a way to get it working, and after the flash, USB debugging was set on, so can't figure out what could be happening...
Is it possible it's completely dead?
Any idea?
Just to say that I have tried multiple combinations while plugging the device to the PC, and didn't worked...
I mean, the PC seems to react, but always with the same end, only shows the Qualcomm port 9008, nothing about the adb...
Getting out of ideas, anyone more has some?
did you start the tool with admin rights?
read a Little bit here
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
if you have a Z2 pro take this
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
Zukunft said:
did you start the tool with admin rights?
read a Little bit here
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
if you have a Z2 pro take this
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
Click to expand...
Click to collapse
Yeah, I already started the cmd with admin rights, but the problem is that adb does not works, as the device is not turning on.
As you can check in my first post, in the screenshot, after running the "adb devices" command, it doesn't gives any kind of error, just returns a blank list.
Noggin said:
Yeah, I already started the cmd with admin rights, but the problem is that adb does not works, as the device is not turning on.
As you can check in my first post, in the screenshot, after running the "adb devices" command, it doesn't gives any kind of error, just returns a blank list.
Click to expand...
Click to collapse
adb will never recognized it, in 9008 mode or it's called EDL, the only program that recognized the port is QFIL / Miflash. if you get an error when flashing you must reset your phone again to repeat the process by pressing power button for a couple seconds. if your bootloader already unlocked that must be simpler to do, just press power button for a couple minutes until shor vibration then press vol up + vol down and connect to usb at the same time..
arif_kholid said:
adb will never recognized it, in 9008 mode or it's called EDL, the only program that recognized the port is QFIL / Miflash. if you get an error when flashing you must reset your phone again to repeat the process by pressing power button for a couple seconds. if your bootloader already unlocked that must be simpler to do, just press power button for a couple minutes until shor vibration then press vol up + vol down and connect to usb at the same time..
Click to expand...
Click to collapse
Thanks for the info, I've tried the vol + and vol- buttons after the short vibration, and the PC does not detect the device...
Is it there any other way to get the device detected by the PC?
Actually, the only thing the device does, is the following:
After pressing the PWR button for around 5-7 seconds, it makes a short vibration and the notifications led makes a flash in green colour, but nothing more... If you keep pressing it, around 7-8 later, it makes a litte bigger vibration and a flash on green too... And if you continue, it does on, and on, and on...
Any idea? Anyone told me about getting a Xiaomi Deep flash cable, but I'm not sure about if that will work or not...
Noggin said:
Thanks for the info, I've tried the vol + and vol- buttons after the short vibration, and the PC does not detect the device...
Is it there any other way to get the device detected by the PC?
Actually, the only thing the device does, is the following:
After pressing the PWR button for around 5-7 seconds, it makes a short vibration and the notifications led makes a flash in green colour, but nothing more... If you keep pressing it, around 7-8 later, it makes a litte bigger vibration and a flash on green too... And if you continue, it does on, and on, and on...
Any idea? Anyone told me about getting a Xiaomi Deep flash cable, but I'm not sure about if that will work or not...
Click to expand...
Click to collapse
i've already tried xiaomi deep flash cable, and its work on my z2 plus, that's how to force phone into 9008 mode.. and also, dont add space between folder names where your firmware files there or there will always sahara fail
Hey man!
I had the same Problem!
Sahara error, no reaction from device, black screen, port recognized in qfil etc.
I found out that this behaviour of the device means, that it is in EDL-mode.
what helped ma was:
1) Unplug everything.
2) Set up the QFIL Tool completely, but do not hit "Download Content".
3) Try to "reboot" the Zuk Z2 Pro by pressing the power button for several seconds. Kind of resets everything.
4) Plug in USB
5) execute: "adb reboot edl" via adb
6) unplug USB
7) plug in USB and immediately (within a second!) hit the "Download Content" buton, just after it is clickable.
8) dowload should start without sahara error
Hope it works! :good:
Well, finally, I talked with the aftersales dpt from the shop where I got the device, and returned it, and incredibly it seems it was defective.
The guy from the tech dpt said that it wasn't supposed to die that way, so they returned me a brand new device, and fortunately it's up to date with ZUK's last official ROM.
Thank you everyone for your ideas and help, now I can enjoy this great device
My Zuk Z2 plus got stuck after TWRP, I need help badly.
sirmclord said:
Hey man!
I had the same Problem!
Sahara error, no reaction from device, black screen, port recognized in qfil etc.
I found out that this behaviour of the device means, that it is in EDL-mode.
what helped ma was:
1) Unplug everything.
2) Set up the QFIL Tool completely, but do not hit "Download Content".
3) Try to "reboot" the Zuk Z2 Pro by pressing the power button for several seconds. Kind of resets everything.
4) Plug in USB
5) execute: "adb reboot edl" via adb
6) unplug USB
7) plug in USB and immediately (within a second!) hit the "Download Content" buton, just after it is clickable.
8) dowload should start without sahara error
Hope it works! :good:
Click to expand...
Click to collapse
I will tell my issue
I bought this device this July month, I was encouraged seeing you guys did a lot of flashing, I thought I could flash myself but it became a nightmare now.
I am not that much technical so please bare my usage of words below, but I need a real help.
I was doing the basic TWRP for getting the AICP ROM 12.1 but after wiping the data from TWRP my device doesnt get recognized for the Sideload and I did whatever I can but it doesnt detect my phone, so I am having a screen with Start "Green" which is showing the device status as unlocked and when I click on Recovery it goes to the Zuk logo and doesn't have any sign after that.. stuck really
I tried using QFIL but my device detects as 900H but not 9008 also adb doesn't detect my device at all after this.
I think I really did a hard brick of my device.
I dont want to loose hope, I want your help really badly.
For those of you who had the same problem don't give up! I was in that same situation and I solved by putting my phone on EDL via this method
https://www.youtube.com/watch?v=2m44xKog-dI
After plugging the phone for the second time and QFIL recognize as EDL mode I clicked on download content as fast as I could so it started to flash the ROM that I spent like 10h trying to figure a way to do it lol. Anyways, the procedure is the same as putting into EDL via adb fastboot, the only difference is that you make it through a "fake" deep flash cable as that guy in the video shows.
I did the following things
1. Unlocked the bootloader.
2. Flashed twrp 3.0.2 with fastboot.
3. Flashed a rom cm14 unofficial.
4. Phone stuck into Bootloop.
5. Got update.app file from stock rom.
6. Used HUAWEI update extractor tool and made a flashable zip file for 5.1 Android version.
7. Flashed this file as a rom through twrp.
8. Now phone does not switch on.
9. Not even in bootloader, recovery nothing.
10. Screen completely black, nothing.
11. When connected to PC via USB, qsmusb_hub driver is asked by PC.
12. Adb/fastboot not detecting it.
13. Pressing any combination of volume and power buttons, changes the USB device connection (PC makes sound of USB connection and removal but nothing happens.
The led indicator starts blink after some time, it too goes off if I press volume + the power button. After sometime the indicator starts blinking rapidly.
If anyone can help me how to install stock recovery ir to go to bootloader anyway, will be very grateful
Name = Neeraj
Whatsapp= (0091) 8700748606
Mobile=(0091) 9212281840
Mail= [email protected]
Country= India.
neerajksw said:
I did the following things
1. Unlocked the bootloader.
2. Flashed twrp 3.0.2 with fastboot.
3. Flashed a rom cm14 unofficial.
4. Phone stuck into Bollywood.
5. Got update.app file from stock rom.
6. Used HUAWEI update extractor tool and made a flashable zip file for 5.1 Android version.
7. Flashed this file as a rom through twrp.
8. Now phone does not switch on.
9. Not even in bootloader, recovery nothing.
10. Screen completely black, nothing.
11. When connected to PC via USB, qsmusb_hub driver is asked by PC.
12. Adb/fastboot not detecting it.
13. Pressing any combination of volume and power buttons, changes the USB device connection (PC makes sound of USB connection and removal but nothing happens.
If anyone can help me how to install stock recovery ir to go to bootloader anyway, will be very grateful.
Click to expand...
Click to collapse
When you connect it to a charger while it is off, does the screen show the filling battery animation?
No, it does not show battery filling.
Only led starts blinking blue.
neerajksw said:
No, it does not show battery filling.
Only led starts blinking blue.
Click to expand...
Click to collapse
You need to take it to a service center.
When a phone is plugged in and it doesn't show the charging interface, that's a bad sign.
u need drivers and blank_flash file to get it back to life . that case service only these file are not available !
i did something Stupid and my Z2 Pro dead
there is no fast-boot and no recovery .. only black screen and when i press power button there is a short and long vibration just that and the LED there is flash yellow for 0.1 second
aljthab said:
i did something Stupid and my Z2 Pro dead
there is no fast-boot and no recovery .. only black screen and when i press power button there is a short and long vibration just that and the LED there is flash yellow for 0.1 second[/QUOTE try connecting it to the PC, if it doesn't show anything on PC then just hand it over to the lenovo service center and blame it on the device that it stopped booting :silly:. I thought i had bricked my device but they did something and gave it to me in 3 to 4 days and that was done under the warranty no extra charge and don't confess that I had rooted ur device , If u tell them that they will try to extort money from u :crying:
Click to expand...
Click to collapse
aljthab said:
i did something Stupid and my Z2 Pro dead
e LED there is flash yellow for 0.1 second
Click to expand...
Click to collapse
I have exactly the same, what to do? I installed the dev 44, the rate of established but after 15 minutes, logo is stalled, not waiting until the end of excess freewheeling dev 300, it is not fully established and bug crawled, I rebooted the machine and an endless vibration with green LED :crying:
1 Charging can be a little warm
2. can not be detected pc
3. can not access the fastboot mode
4. when charging, the notification light dies
5. deep flash cable has not helped
sorry my bad english
kerei said:
I have exactly the same, what to do? I installed the dev 44, the rate of established but after 15 minutes, logo is stalled, not waiting until the end of excess freewheeling dev 300, it is not fully established and bug crawled, I rebooted the machine and an endless vibration with green LED :crying:
1 Charging can be a little warm
2. can not be detected pc
3. can not access the fastboot mode
4. when charging, the notification light dies
5. deep flash cable has not helped
sorry my bad english
Click to expand...
Click to collapse
Refer to this http://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ and this http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
same issue with zuk z2
adriano1593 said:
Refer to this http://zukfans.eu/community/threads/how-to-unbrick-zuk-z2-from-diagnostic-port-900e.2856/ and this http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-z2131-only.104/
Click to expand...
Click to collapse
Hello there... Any solution you found? I am stuck with my zuk z2 in same situation ?? any help ?
I have a similar problem.
What caused the black screen? -
History:
I booted to test mode at 2.5.033 ST, the phone got stucked at this menue there was no way to get out. TWRP Restore to Nandroid bougt only black screen after 2nd vibration and ZUK logo.
I fixed the Test mode bug, by flashing the ZUI 1.9.104 ST Stock ROM via QPST.
After the phone was "repaired" I unlocked the bootloader, installed TWRP, made a nandroid backup of fully stock ROM and restored a nandroid backup from before the test mode problem.
The nandroid restore was successful, I rebooted the phone and it was "dead". Black screen, only rebooting (perioldy vibrating) there was no end, until the battery was empty.
I got no luck to reach any mode with tricky button pressing (vol+ pwr; vol- pwr; vol+ vol- pwr; usb in vol-) nor Windows detecting the phone. That's why I decided to remove the back glass cover, to got access to the battery.
Now I'm able to get the phone detected by my PC.
What I did: disconnect the battery, connect the phone to my computer, pressed the vol- button and connect the battery.
This made my PC able to detect the phone, but no I have an other problem. Windows only detects the phone as "unknown usb device (device descriptor request failed)". I don't know any way to install the driver....
Maybe anyone is able to help me or has any tip?
Thanks!
Cheers,
m_atze
m_atze said:
I have a similar problem.
What caused the black screen? -
History:
I booted to test mode at 2.5.033 ST, the phone got stucked at this menue there was no way to get out. TWRP Restore to Nandroid bougt only black screen after 2nd vibration and ZUK logo.
I fixed the Test mode bug, by flashing the ZUI 1.9.104 ST Stock ROM via QPST.
After the phone was "repaired" I unlocked the bootloader, installed TWRP, made a nandroid backup of fully stock ROM and restored a nandroid backup from before the test mode problem.
The nandroid restore was successful, I rebooted the phone and it was "dead". Black screen, only rebooting (perioldy vibrating) there was no end, until the battery was empty.
I got no luck to reach any mode with tricky button pressing (vol+ pwr; vol- pwr; vol+ vol- pwr; usb in vol-) nor Windows detecting the phone. That's why I decided to remove the back glass cover, to got access to the battery.
Now I'm able to get the phone detected by my PC.
What I did: disconnect the battery, connect the phone to my computer, pressed the vol- button and connect the battery.
This made my PC able to detect the phone, but no I have an other problem. Windows only detects the phone as "unknown usb device (device descriptor request failed)". I don't know any way to install the driver....
Maybe anyone is able to help me or has any tip?
Thanks!
Cheers,
m_atze
Click to expand...
Click to collapse
What id shown in unknown device.
Like ven_9102&dev_1234
Maybe with editing quallcom drivers for your device id, you can still install it.
and if luck qpst can recognize it as qualcomm debug mod
Sent from my ZUK Z2121 using Tapatalk
eryenakgun said:
What id shown in unknown device.
Like ven_9102&dev_1234
Maybe with editing quallcom drivers for your device id, you can still install it.
and if luck qpst can recognize it as qualcomm debug mod
Sent from my ZUK Z2121 using Tapatalk
Click to expand...
Click to collapse
Hi,
Thanks for your quick response.
The Hardware ID: USB\DEVICE_DESCRIPTOR_FAILURE
"Error Message": This device has been stopped because it has reported errors. (Code 43)
An error occurred while requesting the USB device descriptor.
m_atze said:
I have a similar problem.
What caused the black screen? -
History:
I booted to test mode at 2.5.033 ST, the phone got stucked at this menue there was no way to get out. TWRP Restore to Nandroid bougt only black screen after 2nd vibration and ZUK logo.
I fixed the Test mode bug, by flashing the ZUI 1.9.104 ST Stock ROM via QPST.
After the phone was "repaired" I unlocked the bootloader, installed TWRP, made a nandroid backup of fully stock ROM and restored a nandroid backup from before the test mode problem.
The nandroid restore was successful, I rebooted the phone and it was "dead". Black screen, only rebooting (perioldy vibrating) there was no end, until the battery was empty.
I got no luck to reach any mode with tricky button pressing (vol+ pwr; vol- pwr; vol+ vol- pwr; usb in vol-) nor Windows detecting the phone. That's why I decided to remove the back glass cover, to got access to the battery.
Now I'm able to get the phone detected by my PC.
What I did: disconnect the battery, connect the phone to my computer, pressed the vol- button and connect the battery.
This made my PC able to detect the phone, but no I have an other problem. Windows only detects the phone as "unknown usb device (device descriptor request failed)". I don't know any way to install the driver....
Maybe anyone is able to help me or has any tip?
Thanks!
Cheers,
m_atze
Click to expand...
Click to collapse
Alright bro, there is one method you can try.
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
I assume your phone is a brick now. The only method you can use is the 9008 unbrick mode. (AKA QBST)
There are a few things you need to prepare before you save ur phone. U need to download the require application that the website provided above, after you set everything up,
make sure you download the latest 2.5 QBST rom,
http://bbs.lenovomobile.cn/z2pro/t554654/
Because ur phone wont be able to enter 9008 through software, thus u need to do the following.
1. Load the content XML fille,
2.Turn off your phone. After it's fully shutdown
3. press and hold the volume up button for 3 seconds
4. press power button while hold the volume up (press it for 0.5second and keep holding it)
5. after 0.5 seconds, plug in the usb right away
6. the QFIL tool should appear the Qualcomm usb QD loader
7. the download button should turn blue
8. flash it and wait for reboot
OtakuLi said:
Alright bro, there is one method you can try.
http://zukfans.eu/community/threads/howto-flash-a-stock-zui-rom-zuk-z2-pro-z2121-only.57/
I assume your phone is a brick now. The only method you can use is the 9008 unbrick mode. (AKA QBST)
There are a few things you need to prepare before you save ur phone. U need to download the require application that the website provided above, after you set everything up,
make sure you download the latest 2.5 QBST rom,
http://bbs.lenovomobile.cn/z2pro/t554654/
Because ur phone wont be able to enter 9008 through software, thus u need to do the following.
1. Load the content XML fille,
2.Turn off your phone. After it's fully shutdown
3. press and hold the volume up button for 3 seconds
4. press power button while hold the volume up (press it for 0.5second and keep holding it)
5. after 0.5 seconds, plug in the usb right away
6. the QFIL tool should appear the Qualcomm usb QD loader
7. the download button should turn blue
8. flash it and wait for reboot
Click to expand...
Click to collapse
Thanks for your tip.
I followed your described procedure, but the phone will not be recocnized by the PC.
1st: I loaded QFIL XML file. (By the way this tut is made by me)
2nd: I disconnected the battery (The phone can't be turned off normally!)
3rd, 4th, 5th
6th: nothing happend!
7th: "-"
8th: "-"
The only way the phone will detected by the PC:
1st: disconnect battery
2nd: plug in USB (PC and Phone)
3rd: press VOL+ or VOL- or PWR button (doesn't matter which one)
4th: connect battery
5th: detected as "unknown usb device (device descriptor request failed)"
m_atze said:
Thanks for your tip.
I followed your described procedure, but the phone will not be recocnized by the PC.
1st: I loaded QFIL XML file. (By the way this tut is made by me)
2nd: I disconnected the battery (The phone can't be turned off normally!)
3rd, 4th, 5th
6th: nothing happend!
7th: "-"
8th: "-"
The only way the phone will detected by the PC:
1st: disconnect battery
2nd: plug in USB (PC and Phone)
3rd: press VOL+ or VOL- or PWR button (doesn't matter which one)
4th: connect battery
5th: detected as "unknown usb device (device descriptor request failed)"
Click to expand...
Click to collapse
Make sure you have to plug in the usb right away as soon as you u press power, and keep holding them
OtakuLi said:
Make sure you have to plug in the usb right away as soon as you u press power, and keep holding them
Click to expand...
Click to collapse
Yes, I did exactly you described. Sorry but this isn't working.
I don't know what I should do. Even a repair shop couldn't fix it.
Maybe I need to do this:
http://bbs.lenovomobile.cn/z2/t121791/?highlight=900e
But I don't want to destroy my PC (3000 bugs)
m_atze said:
Yes, I did exactly you described. Sorry but this isn't working.
I don't know what I should do. Even a repair shop couldn't fix it.
Maybe I need to do this:
http://bbs.lenovomobile.cn/z2/t121791/?highlight=900e
But I won't destroy my PC (3000 bugs)
Click to expand...
Click to collapse
oh well, good luck
OtakuLi said:
oh well, good luck
Click to expand...
Click to collapse
I will report the result.
OK. I made the deepflash cable.
After using it there is no difference between pressing one of the button combinations I recently mentioned (VOL+ or VOL- or PWR).
The phone will be detected as Unknown device. After intalling my modified driver to match the unknown ID, QFIL don't detect the COM Port.
Hello had the same problem, only with the difference that my battery was not completely discharged.
What has helped:
1 Start QFIL Tool
2 Press the volume +
3 Connect the original cable to the PC
4 QFIL Tool recognized the phone and I could play an original Rome.
Mfg
Ps. Is now the battery cover (glass) broken?
No, I used a hairdryer, a razorblade, plastic tool and a suction cup to lift the backcover glass.
The glass is fully intact no damages.
You have good nerves. I would not have expected that.
But in the end, it does not matter if it does not start anymore.
Thank you again for your great instructions for playing and rooting the mobile phone.
I hope you get your phone back.
Mfg
Good and bad news
The guy unbricked the phone successfully, I received it today.
Now I have an other problem:
The phone is very very slow and laggy now.
The problem occurs everywere, Recovery, boot (the bootlogo laggs), booted System, also the test mode laggs now
Furthermore the sceen flickers sometimes and at the right side the sceen is mirrored sometimes.
Did anyone has an idea?
What I did today:
reflash through qfil
1.9.104_ST
2.3.044_ST
ZUI_2.5.335_ST
Hi m_atze, I am exactly in the same situation as You. After using deep flash cable method, I got "unknown usb device (device descriptor request failed)". Could You tell me what was the solution to unbrick the phone?
I made a mistake while I was flashing a custom ROM PixelPlus UI in my device Redmi 9
after seccessfully flashing it I locked the bootloader and now my doesn't turn on either going in fastboot mood.I need help to fix it..plz plz plz
Hi, make sure that your battery is full, then hold VOl + and power key together and connect USB cable and see if is detected. The other things is to flash with edl mode but you need testpoint and flash tool like MRT... See over the internet for your model...
Vol+ and power key doesn't shows any sign.
Try then with VOl - and power but keep pressing and plug usb cable, if that doesn't work you need edl flashing....
Does edl supports in MTK processores?
Hi, sorry I mixed your device with Mi 9 model.... For MTK chipset you need BROM mode, so try to hold both VOL + and VOL - and plug usb cable and see if is detected... If it doesn't then send your device to nearby service center in order to flash with service box...
It shows something in ports......and few seconds later it goes away.
Good sign, then follow this flashing... use only if you have same chipset!
Mine is Mediatek G80 / MTK6769
Download Redmi 9 tested Flash File Firmware No Auth 100% Free
Download Redmi 9 tested Flash File Firmware No Auth Firmware Flash by using the SP Flash tool, 100% Free without Authorized MI account
romprovider.com
Do research....
i am trying but the port driver is still disconnecting...it doesnt stays stable
AlJabir001 said:
i am trying but the port driver is still disconnecting...it doesnt stays stable
Click to expand...
Click to collapse
Have your issue resolve and if so what exactly have you done, one of my friend done the same and facing the issue.
You are screwed if you locked the bootloader. Nothing you can do. At all.
AlJabir001 said:
i am trying but the port driver is still disconnecting...it doesnt stays stable
Click to expand...
Click to collapse
use the bypass_flashtool
bypass_flashtool_driver.rar
drive.google.com
YashxOS said:
bypass_flashtool_driver.rar
drive.google.com
Click to expand...
Click to collapse
go to bypass and run the brom.bat if on windows
conect the device it will regenizi it and force it to be stable
here a guide https://forum.xda-developers.com/t/...-etc-from-a-hard-brick.4535709/#post-87924847
YashxOS said:
here a guide https://forum.xda-developers.com/t/...-etc-from-a-hard-brick.4535709/#post-87924847
Click to expand...
Click to collapse
Thanks but issue has already been resolved using some tool provided on YouTube to unlock bootloader
navrkr said:
Thanks but issue has already been resolved using some tool provided on YouTube to unlock bootloader
Click to expand...
Click to collapse
oh ok when done put the [sovled]