Database Develop

flash stop at 11 % normal ?

somme help please
hello i have download X1_HardSPL.exe
i have execute it
i connect the usb after remove batterie and click down volume and power
the software update my phone since 11 % and nothing
now my phone is blocked in attemps for flash
how can i deblock and hvae a real new rom whithout original bug
please help me thank's

Please search or read the faq stickies.

try flashing orig rom by bootloader-mode.
if no than
try flashing orig rom by flashcard.
if no too
you have a problem.

[Q] need help battery stuck on 42% and not charging and battery drain

Im on stock jelly bean from sammobile.com and im getting this and a lot of freezing.
Please help

remove the battery for a few seconds and check again.. then try a factory reset.

[Q] stucked in boot loop need imei flasher/changer

It was a nice day with my phone and suddenly it restarts, and it was month now I have tried flashing every stock rom I had. so many custom roms too but the time it reaches to desktop phone restarts. Out of 1000 or more restarts 1 time I got succes and one thing I noticed that my imei is showing unkonown. So this may or may not be the root cause, since then I am searching for the solution how to flash the imei but coudn't find anyuthing so please if anyone have anything to say on this pls reply.
Also the phone can go in recovery and don't restart so this may help anybody to understand the problem more aptly.

With sut lr and try to flash stock rom

rizla13shd said:
With sut lr and try to flash stock rom
Click to expand...
Click to collapse
Tried that too but it didn't help.

Flash without battery first

good

Updated a8.0

Hard Brick Android one micromax AQ4501 plz help

android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.

afireon8 said:
android one is not powering on . this is happen when i was flashing kitkat stoke rom on it . i chose the option download+formate all and connect my phone but after flashing finish its not powering on .
its detecting in sptool and i tried to flash stoke rom , flashing is successful but phone is not booting or power button not working .
in SPTool v5.1552 memory test it showing nand flash memory not detected .
i also showed this phone in service center they said to change motherboard which cost 3000 inr .
please help me is there any way to unbrick this.
Click to expand...
Click to collapse
It is recommended never to use "download+format all" option ......I have many times used sp flash tools for flashing stock rom ....I always used "firmware upgrade" option......I never faced any problem ....

same here bro...
my a1 also dead after flashing and not powering on
not even shows charging....
plz post if found any solution...

found something
i cannot try this because i dont hv fon with me....
http://forum.xda-developers.com/showthread.php?t=1943442

Try latest sptool i also face this problem & flash stock rom lollipop build may it will help you )*

just use sp flash tool 5.142

Guys m facing the same problem... Using sp flash tool version 5.1604 .. Help me plz

Battery indicator doesn't fully charge or discharge

Hi everyone,
My battery indicator doesn't go up to 100% and it also doesn't go to 0% (or 1%?).
While the full power is more a nuisance, I yesterday was trying to make a phone call while my phone said 63%, just for it to power off when I dialed out (when plugging it in it showed 1%).
Does anyone know how to fix this?
I am on 7.1.2 Official Ressurection Remix, firmware v32, stock kernel.
ps: I did downgrade from Oreo (NOS) - clean flashed - does this have anything to do with it?

Fastboot method FTW!
The best way to solve the issue is to Flash Fastboot ROM [Guide here]
Remember not to select Lock Bootloader option Inside Mi Flash tool as You will be Reverting back to Custom ROM later. Use The Fastboot ROM for 2-3 Days. Charge till 100% then drain to 4/5%.
If you want to calibrate Your Battery in Custom ROM and think fastboot method is not-so-easy for you.. then Flash MIUI Via recovery mode and Calibrate battery there (Charge till 100% then drain to 4/5%.) for Two times.
If recovery method fails try Fastboot method. :highfive:

__PG__ said:
The best way to solve the issue is to Flash Fastboot ROM [Guide here]
Remember not to select Lock Bootloader option Inside Mi Flash tool as You will be Reverting back to Custom ROM later. Use The Fastboot ROM for 2-3 Days. Charge till 100% then drain to 4/5%.
If you want to calibrate Your Battery in Custom ROM and think fastboot method is not-so-easy for you.. then Flash MIUI Via recovery mode and Calibrate battery there (Charge till 100% then drain to 4/5%.) for Two times.
If recovery method fails try Fastboot method. :highfive:
Click to expand...
Click to collapse
So you're saying I should flash the stock rom with Fastboot and use it for few days, or did I misunderstand that?
If I didn't will the xiaomi.eu roms also work?

supermooshman said:
So you're saying I should flash the stock rom with Fastboot and use it for few days, or did I misunderstand that?
If I didn't will the xiaomi.eu roms also work?
Click to expand...
Click to collapse
Yes, flash stock via Fastboot and stay there, also Xiaomi.eu if coming for Fastboot method you can try.