Hi. I have buyed Xz2 with CE1 fw... Problem is that I want pie, and it wasn't released for CE1. Then I tryed to flash DE pie fw using flash tool, but there wasn't any fsc for 52. Fw, so I just used 51.1 fsc. That bringed me red flag... Then I flashed DE oreo, and using Xperia Companion updated to DE Pie.
But now I got problem. When I try unlock bootloader I get error Remote command not allowed.
In developer settings is OEM Unlockinng greyed and cannot be enabled. In service menu is Bootloader unlock allowed: Yes.
What should I do to unlock bootloader?
gouster3 said:
Hi. I have buyed Xz2 with CE1 fw... Problem is that I want pie, and it wasn't released for CE1. Then I trues to flash DE pie fw using flash tool, but there wasn't any fsc for 52. Fw, so I just used 51.1 fsc. That bringed me red flag... Then I flashed DE oreo, and using Xperia Companion updated to DE Pie.
But now I got problem. When I try unlock bootloader I get error Remote command not allowed.
In developer settings is OEM Unlockinng greyed and cannot be enabled. In service menu is Bootloader unlock allowed ' Yes.
What should I do to unlock bootloader?
Click to expand...
Click to collapse
Try a factory reset if this option is greyed out without doing anything.
MartinX3 said:
Try a factory reset if this option is greyed out without doing anything.
Click to expand...
Click to collapse
Thanx.
But I tryed disabling screen lock, booting phone without Sim..
Right now i have done factory reset and its still greyed.
gouster3 said:
Thanx.
But I tryed disabling screen lock, booting phone without Sim..
Ritch now i have done factory reset and still greyed.
Click to expand...
Click to collapse
Then do what I did.
Using xperifirm Software you reinstall your device with the latest PIE firmware.
I use the German H8266 PIE firmware on my Hongkong H8296.
MartinX3 said:
Then do what I did.
Using xperifirm Software you reinstall your device with the latest PIE firmware.
I use the German H8266 PIE firmware on my Hongkong H8296.
Click to expand...
Click to collapse
I'm already using latest H8266 German pie.
gouster3 said:
I'm already using latest H8266 German pie.
Click to expand...
Click to collapse
Reflashed with the newflasher application inside of xperifirm?
MartinX3 said:
Reflashed with the newflasher application inside of xperifirm?
Click to expand...
Click to collapse
No, newflasher doesnt working for me.
I flashed german oreo using flashtool, and then used Repair option in Xperia Companion.
And it flashed me German Pie.
gouster3 said:
No, newflasher doesnt working for me.
I flashed german oreo using flashtool, and then used Repair option in Xperia Companion.
And it flashed me German Pie.
Click to expand...
Click to collapse
Please try an entire factory reset and reinstallation with the latest pie firmware and newflasher
It fixed some bugs at my site.
I got issue using flashtool as my phone got issue(niot stable network and wifi). Newflasher saves the day no issue after using it. Why newflasher does not work for you?
spine6 said:
I got issue using flashtool as my phone got issue(niot stable network and wifi). Newflasher saves the day no issue after using it. Why newflasher does not work for you?
Click to expand...
Click to collapse
He didn't tried it with newflasher. :silly:
I have that same problem
power_510 said:
I have that same problem
Click to expand...
Click to collapse
After reinstalling the phone with newflasher?
(You will loose the userdata)
Flash Oreo
Envoyé de mon H8266 en utilisant Tapatalk
Downgrade
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
power_510 said:
Downgrade
Click to expand...
Click to collapse
You need internet to unlock.the bootloader?
Did you use an advertisement blocker?
A VPN app?
Does your provider version of the firmware block it?
spine6 said:
I got issue using flashtool as my phone got issue(niot stable network and wifi). Newflasher saves the day no issue after using it. Why newflasher does not work for you?
Click to expand...
Click to collapse
Idk why, it ask me for drivers. N (already installed)
Then it ask me for ta backup. Tried Y. Ta isn't backed up, just empty file created.
Trued N, newflasher hangs and doesn't even read any file from HDD (taskmgr disk usage)
But my problem solved. Many people have grayed that oem unlocking option in pie update, it should be fixed with next ota. (05.11.18)
Not me
silveraero said:
Not me
Click to expand...
Click to collapse
You activated it in Oreo before upgrading to PIE?
MartinX3 said:
You activated it in Oreo before upgrading to PIE?
Click to expand...
Click to collapse
Yes, but I did not unlock bootloader, just show the picture that it is not disabled
silveraero said:
Yes, but I did not unlock bootloader, just show the picture that it is not disabled
Click to expand...
Click to collapse
Maybe it remembers your activation of this seeing in Oreo
Related
Whenever I upgrade to Android 4.2.2 I get process system not responding. I've tried everything flashing to a stock android 4.2.2 via sony update tool & pc companion. I even tried monXdifiedZ but even that doesn't work. Although latest CM 10.1, PAC works. Android .307 works perfectly. Please help!
shekharsuman said:
Whenever I upgrade to Android 4.2.2 I get process system not responding. I've tried everything flashing to a stock android 4.2.2 via sony update tool & pc companion. I even tried monXdifiedZ but even that doesn't work. Although latest CM 10.1, PAC works. Android .307 works perfectly. Please help!
Click to expand...
Click to collapse
On your phone go to Settings=>About phone. Under Model number does it say C6602 or C6603?
shekharsuman said:
Whenever I upgrade to Android 4.2.2 I get process system not responding. I've tried everything flashing to a stock android 4.2.2 via sony update tool & pc companion. I even tried monXdifiedZ but even that doesn't work. Although latest CM 10.1, PAC works. Android .307 works perfectly. Please help!
Click to expand...
Click to collapse
Did you try flashing a tft with the flashtool?
Drummerjed said:
On your phone go to Settings=>About phone. Under Model number does it say C6602 or C6603?
Click to expand...
Click to collapse
I downloaded .423 (4.2.2) version of Android for my C6602 device. I flashed it via flashtool. So I think my device will be C6602. I cannot access settings because of this error (process system not responding) and the device restarts in a 20-30 seconds.
kistigun said:
Did you try flashing a tft with the flashtool?
Click to expand...
Click to collapse
Yes. I downloaded stock 4.2.2 android version for INDIA and flashed it with flashtool and I'm still receiving the same error. I wonder why android of previous versions are working.
shekharsuman said:
I downloaded .423 (4.2.2) version of Android for my C6602 device. I flashed it via flashtool. So I think my device will be C6602. I cannot access settings because of this error (process system not responding) and the device restarts in a 20-30 seconds.
Click to expand...
Click to collapse
I know you have already tried flashing with Flashtool but try following this guide
When you get to step 4 download the two files (Stock 4.2.2) from here
When you get to step 6 tick all three boxes under Wipe and leave all boxes under Exclude unchecked.
Drummerjed said:
I know you have already tried flashing with Flashtool but try following this guide
When you get to step 4 download the two files (Stock 4.2.2) from here
When you get to step 6 tick all three boxes under Wipe and leave all boxes under Exclude unchecked.
Click to expand...
Click to collapse
That's what I've done. That ftf didn't work for me so I thought that was damaged or something so I used PC Companion to download the latest firmware for my C6602 and I created my own ftf and flashed it following the same steps mentioned in the guide but the device still restarts.
shekharsuman said:
That's what I've done. That ftf didn't work for me so I thought that was damaged or something so I used PC Companion to download the latest firmware for my C6602 and I created my own ftf and flashed it following the same steps mentioned in the guide but the device still restarts.
Click to expand...
Click to collapse
Tried this? http://forum.xda-developers.com/showthread.php?t=2350470
Scroll to the bottom for the solution
You'll need to flash this ftf if you've got the c6602 model.
Drummerjed said:
Tried this? http://forum.xda-developers.com/showthread.php?t=2350470
Scroll to the bottom for the solution
You'll need to flash this ftf if you've got the c6602 model.
Click to expand...
Click to collapse
Doesn't work for me.
shekharsuman said:
Doesn't work for me.
Click to expand...
Click to collapse
Ok, and you're sure that you're using the C6602 model? Look at the bottom of the phone:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Drummerjed said:
Ok, and you're sure that you're using the C6602 model? Look at the bottom of the phone:
Click to expand...
Click to collapse
Yes. It's C6602!
Hello everyone. I recently bought P9 but the battery life is really awfull. I was wondering which firware version is the best for battery life or is it all the same? I'm from Croatia. Here is my current one (also I don't have any updates available)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my EVA-L09 using Tapatalk
try this app from store : FF here
with this you maybe can update your phone!
and, about battery life, its much better in nuget than marshmalow. but for me at b182 it wasnt so bad, but in b360 its way better.
The battery life of my P9 is outstanding!
Sent from my EVA-L09 using Tapatalk
Okay I tried the app, I see a list of firmwares. Do I have to be rooted, unclocked bootloader or is it safe to download and install it?
@Craig_D Which version are you on?
brchina said:
Do I have to be rooted, unclocked bootloader or is it safe to download and install it?
Click to expand...
Click to collapse
Don't need to be rooted or unlocked. can't say if its safe, but there nothing bad hapen to my phone. If update fails, it boot in where you was.
brchina said:
Okay I tried the app, I see a list of firmwares. Do I have to be rooted, unclocked bootloader or is it safe to download and install it?
@Craig_D Which version are you on?
Click to expand...
Click to collapse
I'm on B182. Contemplating jumping into N
Sent from my EVA-L09 using Tapatalk
Craig_D said:
I'm on B182. Contemplating jumping into N
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
Did you update through OTA or via Firmware Finder?
brchina said:
Did you update through OTA or via Firmware Finder?
Click to expand...
Click to collapse
I've just Unlocked my bootloader/Installed TWRP/Rooted then followed this guide.....
https://www.huaweiblog.de/software/android/marshmallow/huawei-p9-firmwareupdate-b182-leak/
Now, I then used Firmware Finder and downloaded B361
Is there a way to unlock bootloader without dc-unlocker? I don't find it hard to root and instal custom recovery there are guides here but I'm not sure about bootloader. How did you unlock it? Thanks for replying.
brchina said:
Is there a way to unlock bootloader without dc-unlocker? I don't find it hard to root and instal custom recovery there are guides here but I'm not sure about bootloader. How did you unlock it? Thanks for replying.
Click to expand...
Click to collapse
Just ask Huawei, they gave me mine within a day or so via email....
[email protected]
The code they gave me matched the code I acquired using Bootloader unlocking tool I downloaded online so I knew it was safe. I carried all the work out using droidth's SRK tool
Sent from my EVA-L09 using Tapatalk
Thank you. I requested Huawei via e-mail. I screenshotted "About phone". Hope that is enough.
brchina said:
Is there a way to unlock bootloader without dc-unlocker? I don't find it hard to root and instal custom recovery there are guides here but I'm not sure about bootloader. How did you unlock it? Thanks for replying.
Click to expand...
Click to collapse
you can get unlock code here : http://emui.huawei.com/en/plugin/hwdownload/download under unlock bootloader.
or, you can try using hisuite to upgrade to nuget without unlocking bootloader. No need it, no need root, no need twrp.. I upgradet my eva-l19c432b182 sucefuly to b360.
you need hisuite
you need firware updater
custom room name is EVA-L09C150B360
custom url : http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v72998/f1/
or: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1079/g104/v72998/f2/
duno what difference from f2 and f1. But if it not for your phone, upgrade will fail, but your phone will boot where it was before.
ps. if you try, dont just copy text, copy url as url, kuz its not showing full text whats in url, there in mid are dots, forum are made urls shorter
http:// update.hicloud .com:8180/TDS/d...104/v72998/f1/ realy are http:// update.hicloud.c om:8180/ TDS/data/ files/p3/s15/G1079/ g104/v72998/f1/
Craig_D said:
I've just Unlocked my bootloader/Installed TWRP/Rooted then followed this guide.....
https://www.huaweiblog.de/software/android/marshmallow/huawei-p9-firmwareupdate-b182-leak/
Now, I then used Firmware Finder and downloaded B361
Click to expand...
Click to collapse
Hi,
could you successfully install B361 on B182?
I am currently on B182 and used firmware finder app on my P9 to download B361. After unzipping I put UPDATE.app into dload folder on SD card and started installation. The update process always stops at 40%. I am not able to install B361 provided via firware finder. Do you face the same issues?
Thx,
morro23 said:
Hi,
could you successfully install B361 on B182?
I am currently on B182 and used firmware finder app on my P9 to download B361. After unzipping I put UPDATE.app into dload folder on SD card and started installation. The update process always stops at 40%. I am not able to install B361 provided via firware finder. Do you face the same issues?
Thx,
Click to expand...
Click to collapse
I have the same problem......
Just read this (post #11)..........
https://r.tapatalk.com/shareLink?ur...share_tid=3537232&share_fid=3793&share_type=t
Eva-l09c432b361
Sent from my EVA-L09 using Tapatalk
Craig_D said:
I have the same problem......
Just read this (post #11)..........
https://r.tapatalk.com/shareLink?ur...share_tid=3537232&share_fid=3793&share_type=t
Eva-l09c432b361
Sent from my EVA-L09 using Tapatalk
Click to expand...
Click to collapse
Wow, that does not read like a straight forward solution I think I will wait until it is again officially available....
morro23 said:
Wow, that does not read like a straight forward solution [emoji14] I think I will wait until it is again officially available....
Click to expand...
Click to collapse
My sentiments too
Sent from my EVA-L09 using Tapatalk
I just got my XZ2 (H8276) in Canada and no firmware update for it yet, I heard if you install the German firmware you get updates faster, is this possible for my H8276 and how would I go about doing it?
failteck said:
I just got my XZ2 (H8276) in Canada and no firmware update for it yet, I heard if you install the German firmware you get updates faster, is this possible for my H8276 and how would I go about doing it?
Click to expand...
Click to collapse
https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426
Lancaster7 said:
https://forum.xda-developers.com/cr...gress-newflasher-xperia-command-line-t3619426
Click to expand...
Click to collapse
I'm I able to install another models firmware I only have 2 available for the H8276 on XperiFirm
failteck said:
I'm I able to install another models firmware I only have 2 available for the H8276 on XperiFirm
Click to expand...
Click to collapse
You can also obtain and install the firmware in H8216.
---------- Post added at 05:02 AM ---------- Previous post was at 04:57 AM ----------
Lancaster7 said:
You can also obtain and install the firmware in H8216.
Click to expand...
Click to collapse
I am H8296
It is using H8216 firmware.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Lancaster7 said:
You can also obtain and install the firmware in H8216.
---------- Post added at 05:02 AM ---------- Previous post was at 04:57 AM ----------
I am H8296
It is using H8216 firmware.
Click to expand...
Click to collapse
DON'T install the single Sim firmware on a dual Sim XZ2
Install the H8266 dual Sim, like me on my H8296.
Dualsim got a little bit different hardware and probably you will change the vendor driver partition with further normal single Sim firmware updates via Ota!
Lancaster7 said:
You can also obtain and install the firmware in H8216.
---------- Post added at 05:02 AM ---------- Previous post was at 04:57 AM ----------
I am H8296
It is using H8216 firmware.
Click to expand...
Click to collapse
I'm not sure if I did something wrong but I tried the German customized firmware also the UK for the H8216 I didn't work my system didn't want to boot past the Sony logo on my H8276
The only one that would boot into the system was the original firmware using the Newflasher method
failteck said:
The only one that would boot into the system was the original firmware using the Newflasher method
Click to expand...
Click to collapse
are you able to make any h8216 firmware to work on your h8276?
dellromero said:
are you able to make any h8216 firmware to work on your h8276?
Click to expand...
Click to collapse
Why not using the H8266 firmware?
The H8266 is running fine on my H8296.
I have a H8276 Canadian model (not on the Android P beta compatibility list). Even after flashing one of the customized xperifirm FTF's changing it to H8216, Xperia Companion still sees my device as a H8276 (despite having H8216 shown under model name in the service info screen). Is there any workarounds to getting Android Pie on my device?
The error I see in Xperia Companion:
"UEGetPhoneInfoMissingInfo H8276 3546 1313-3413 R20A 51.1.A.11.51 2.1.12.0 / Windows 10 64 bit / Win32 / US"
kwanjai said:
I have a H8276 Canadian model (not on the Android P beta compatibility list). Even after flashing one of the customized xperifirm FTF's changing it to H8216, Xperia Companion still sees my device as a H8276 (despite having H8216 shown under model name in the service info screen). Is there any workarounds to getting Android Pie on my device?
The error I see in Xperia Companion:
"UEGetPhoneInfoMissingInfo H8276 3546 1313-3413 R20A 51.1.A.11.51 2.1.12.0 / Windows 10 64 bit / Win32 / US"
Click to expand...
Click to collapse
PIE comes in November.
What do you want to achieve?
MartinX3 said:
PIE comes in November.
What do you want to achieve?
Click to expand...
Click to collapse
I want to install the Android P beta builds to tinker with.
Are model numbers coded into hidden partitions similar to DRM keys?
kwanjai said:
I want to install the Android P beta builds to tinker with.
Are model numbers coded into hidden partitions similar to DRM keys?
Click to expand...
Click to collapse
It doesn't get updates / Bugfixes
My model Changes from h8296 to h8266.
I used xperifirm to download and flash it.
MartinX3 said:
It doesn't get updates / Bugfixes
My model Changes from h8296 to h8266.
I used xperifirm to download and flash it.
Click to expand...
Click to collapse
Thanks for the reply. I understand it works for you because your device itself was H8296, and so regardless Xperia Companion still allowed you to flash the Developer Build. My situation is my device itself is H8276 which is not on the beta list, but even after flashing it to H8216 successfully (and usable), Xperia Companion still detected that my device was a H8276 and would not allow the Android P beta to be installed.
Question: Is there in any way without rooting, to successfully change where ever Xperia Companion detects my model number? There must be some other parameter somewhere that the normal firmware flash does not update.
Hello according to the setup guide book H8216/H8276 are basically the same because I also have H8276.
kwanjai said:
Thanks for the reply. I understand it works for you because your device itself was H8296, and so regardless Xperia Companion still allowed you to flash the Developer Build. My situation is my device itself is H8276 which is not on the beta list, but even after flashing it to H8216 successfully (and usable), Xperia Companion still detected that my device was a H8276 and would not allow the Android P beta to be installed.
Question: Is there in any way without rooting, to successfully change where ever Xperia Companion detects my model number? There must be some other parameter somewhere that the normal firmware flash does not update.
Click to expand...
Click to collapse
Xperia Companion thinks, that my device is a H8266.
It allows me to install h8266 monthly updates
After reading many things on internet i try HCU Client from DC unlocker and successfully unlock my bootloader.
I buy 4 credits on the site (1 credit = 1 euro) =, after that i install the drivers, download the update of client, put the phone in manufacture mode and a little pray, finally get a unlock code.
I just go to Tool all in one and try the code and finally unlock the Mate 10 Pro.
Congratz. Which firmware version?
Sent from my BLA-L29 using Tapatalk
alixra said:
Congratz. Which firmware version?
Sent from my BLA-L29 using Tapatalk
Click to expand...
Click to collapse
BLA-L09 8.0.0.136(C25)
I want to go to C432.
so the tool worked on your phone even though u have android 8 ???
optiplex2012 said:
so the tool worked on your phone even though u have android 8 ???
Click to expand...
Click to collapse
I was worried about that but it works.
optiplex2012 said:
so the tool worked on your phone even though u have android 8 ???
Click to expand...
Click to collapse
HackDSL said:
I was worried about that but it works.
Click to expand...
Click to collapse
It's fine on Android 8, BUT it was patched in firmware starting June (some later). For example, on C432 it stopped working as of B145. B145 can be downgraded to B142 where it does work. B146 and later can not be downgraded.
For Mate 9 it's still working on latest Oreo.
ante0 said:
It's fine on Android 8, BUT it was patched in firmware starting June (some later). For example, on C432 it stopped working as of B145. B145 can be downgraded to B142 where it does work. B146 and later can not be downgraded.
For Mate 9 it's still working on latest Oreo.
Click to expand...
Click to collapse
ok i see, its because im above 145, thats why its not working
so i need to downgrade to 142 ???
how do i do it ? with FH its possible ???
optiplex2012 said:
ok i see, its because im above 145, thats why its not working
so i need to downgrade to 142 ???
how do i do it ? with FH its possible ???
Click to expand...
Click to collapse
If you're on C432B146 or later you can't downgrade due to new bootloader.
ante0 said:
If you're on C432B146 or later you can't downgrade due to new bootloader.
Click to expand...
Click to collapse
i see, ok thx alot
HackDSL said:
BLA-L09 8.0.0.136(C25)
I want to go to C432.
Click to expand...
Click to collapse
Please let us know if you succeed and which procedure you followed. Thanks!
rickylambert said:
Please let us know if you succeed and which procedure you followed. Thanks!
Click to expand...
Click to collapse
And finally works with new firmware and rebrand the phone from C25 (Claro Latin-america) to C432.
I used a guide from this site.
http://www.androidiani.com/forum/mo...-guida-aggiornamento-rebrand-magisk-root.html
And this is from here but the guide from the site it was more easy to follow.
I don't even understand the language of the guide but with google translator of chrome it was not a problem.
I was getting to many troubles with windows 10.
I got a second laptop and installed Windows 7 and everything works like a charm.
I use the drivers from DC-Unlocker for the Windows 7 and don't install the Hisuite.
Then for do everything I used the HWOTA8_Mate10
The firmware I used to apply to my phone came from here.
http://huawei-firmware.com/phone-list/huawei-mate-10-pro
And this is my phone now...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Omg I did it last last night aswell, rebranded it from version bla_l09 132 (768) up To bla_l09 156 (c432)
Succeeded rebranding C782B132 -> C432B156.
No issues on Windows 10 using latest Hisuite drivers and HWOTA8(Hisuite closed during process) and no need to apply OTA twice. Butter smooth!
I think this is the beta for L09 C432 of pie
http://huawei-firmware.com/rom/huawei-mate-10-pro/bla-l09/25024
Hi all,
Just got a BLA-L09 8.0.0.134(C34) and I'm keen to jump in here..
Can anyone point me in the direction / get a breakdown of each of the ROMs?
Really keen to get back to as stock as possible.
L09 choices as attached. Which one is stock? Is there a stock for a L09?
I note LOTS of choices at http://huawei-firmware.com/phone-list/huawei-mate-10-pro
Thanks in advance..
henrysinn said:
Hi all,
Just got a BLA-L09 8.0.0.134(C34) and I'm keen to jump in here..
Can anyone point me in the direction / get a breakdown of each of the ROMs?
Really keen to get back to as stock as possible.
L09 choices as attached. Which one is stock? Is there a stock for a L09?
I note LOTS of choices at http://huawei-firmware.com/phone-list/huawei-mate-10-pro
Thanks in advance..
Click to expand...
Click to collapse
Hi, some of us have already rebranded to L09C432(EU unbranded) to get the latest Huawei updates. Latest official non-beta version is 8.0.0.156. However, be aware that rebranding takes a little work and risk, of course.
rickylambert said:
Hi, some of us have already rebranded to L09C432(EU unbranded) to get the latest Huawei updates. Latest official non-beta version is 8.0.0.156. However, be aware that rebranding takes a little work and risk, of course.
Click to expand...
Click to collapse
Thanks
Hoping to get basic, unbranded English firmware of any sort.
Thoughts?
Just had success getting unlock CODE via HCU client on Win7 (Fail on Win10)
Currently stuck with the unlock (using Tool All In One). Error in command window is: FAILED <remote: 'Command not allowed'>
Will have another crack tomorrow. Late here down under
henrysinn said:
Thanks
Hoping to get basic, unbranded English firmware of any sort.
Thoughts?
Just had success getting unlock CODE via HCU client on Win7 (Fail on Win10)
Currently stuck with the unlock (using Tool All In One). Error in command window is: FAILED <remote: 'Command not allowed'>
Will have another crack tomorrow. Late here down under
Click to expand...
Click to collapse
Did you install latest drivers and checked ADB/Fastboot are working? Unlocking via AIO is usually straightforward.
I'm currently running BLA-L29 8.0.0.143 (C636patch01) I have the dual sim Mate 10 Pro. What software version should I be on? See that you guys are using BLA-L09 which I believe is a single sim. Isn't that for different hardware than my version?
I no longer have a windows 7 device. Will it work on windows 10 with the compatibility modes?
I hate the battery in the android pie, android 8 had a lot better screen on time
is there any way to go back?
i haver the xz2 dual sim
dentedilupo said:
I hate the battery in the android pie, android 8 had a lot better screen on time
is there any way to go back?
i haver the xz2 dual sim
Click to expand...
Click to collapse
Twrp thread Download Link
Use newflasher v13 from XDA
Will result in a full wipe.
MartinX3 said:
Twrp thread Download Link
Use newflasher v13 from XDA
Will result in a full wipe.
Click to expand...
Click to collapse
i have to unlock the bootloader?
then just use the newflasher v13 ?
or i have to make something else like install twrp?
thanks
dentedilupo said:
i have to unlock the bootloader?
then just use the newflasher v13 ?
or i have to make something else like install twrp?
thanks
Click to expand...
Click to collapse
No unlock needed.
The .sin files are signed by Sony and will be accepted by the bootloader.
MartinX3 said:
No unlock needed.
The .sin files are signed by Sony and will be accepted by the bootloader.
Click to expand...
Click to collapse
wich firmware i should download? because right now i am in the 52.0.a.3.126 (last pie rom )
the 52.0.a.3.84 is also for the pie update
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
dentedilupo said:
wich firmware i should download? because right now i am in the 52.0.a.3.126 (last pie rom )
the 52.0.a.3.84 is also for the pie update
Click to expand...
Click to collapse
TWRP download link -> Android 8 -> Stock
Did you made a full wipe before using PIE?
It solved problems at my side, including the touch problem.
Does a full wiped .126 still drain?
MartinX3 said:
TWRP download link -> Android 8 -> Stock
Did you made a full wipe before using PIE?
It solved problems at my side, including the touch problem.
Does a full wiped .126 still drain?
Click to expand...
Click to collapse
Martin thanks for your help
but i can´t find this : TWRP download link -> Android 8 -> Stock for the xz2
are you talking about this link? https://forum.xda-developers.com/xp...recovery-twrp-3-2-2-0-touch-recovery-t3821597
can´t find nothing there
i made a hard reset after updating to last pie rom, and i fell that android 8 have better battery
dentedilupo said:
Martin thanks for your help
but i can´t find this : TWRP download link -> Android 8 -> Stock for the xz2
are you talking about this link? https://forum.xda-developers.com/xp...recovery-twrp-3-2-2-0-touch-recovery-t3821597
can´t find nothing there
i made a hard reset after updating to last pie rom, and i fell that android 8 have better battery
Click to expand...
Click to collapse
Yes, third post in TWRP thread.
MartinX3 said:
Yes, third post in TWRP thread.
Click to expand...
Click to collapse
found it thanks
can you tell me wich drivers i have to download and install to get the phone recognized in windows in bootloader mode to use newflasher v13
dentedilupo said:
found it thanks
can you tell me wich drivers i have to download and install to get the phone recognized in windows in bootloader mode to use newflasher v13
Click to expand...
Click to collapse
Please search it in the tarp thread, I don't use Windows to work with.
I somehow was able to used the latest Google and drivers because I somehow deactivated the driver verification of windows 10. :silly:
MartinX3 said:
Please search it in the tarp thread, I don't use Windows to work with.
I somehow was able to used the latest Google and drivers because I somehow deactivated the driver verification of windows 10. :silly:
Click to expand...
Click to collapse
drivers from newflasher_v13 worked
i have android 8 again, and i really can notice that the battery is better than android 9 :good:
only one problem, i always have that notification to update to android 9, it´s possible to hide that?
cheers and thank you
dentedilupo said:
drivers from newflasher_v13 worked
i have android 8 again, and i really can notice that the battery is better than android 9 :good:
only one problem, i always have that notification to update to android 9, it´s possible to hide that?
cheers and thank you
Click to expand...
Click to collapse
Touch long on a notification and hide it.
dentedilupo said:
drivers from newflasher_v13 worked
i have android 8 again, and i really can notice that the battery is better than android 9 :good:
only one problem, i always have that notification to update to android 9, it´s possible to hide that?
cheers and thank you
Click to expand...
Click to collapse
hi
can you please share the procedure ?which i can tell andriod pie was much slower .thanks