test point somc flash device ok setool s1 boot failed
flash tool does not see the phone . xperia compaion does not see the phone
test point somc flash device
1 year has passed and the device is still the same stuck red light
Send the device to Sony
Related
Xperia sp stock kernel was 12.1.A.1.201 and flashed with doomkerel v09 and keeps restarting after few minutes and in the end restarted and blank screen and no response and i connected to pc and found required driver qhsusb_dload and installed zeus flash device but nothing now please help no other cell phone i had now please please please.....
Bootloader was unlocked...
Relock bootloader and try again.... You can also use Flashtool to restore/reflash your phone... See my signature below for the link!
Flashtool does not recognize the device as it is in zeus flash device mode or point test mode nothing happening please help....
anyone has any idea if i send it to service center with no warranty what will be the procedure please help.....
It may not be off..press the back key until the phone vibrates 3 times and then connect it to flashmode.
Nothing helpful my phone bricked and nothing useful ..........
So today i wanted to unlock the bootloader for my Xperia Z C6003. From the instructions they stated that i have to shut down the phone and connect it to usb while holding the vol+ button. When i did that, the phone remained black and the computer is not able to detect my phone anymore. I tried different hardware button combinations but the phone could not power on. The computer detects it as QHUSB DLOAD driver but is unsuccessful in installing it. So i downloaded Gordon's Gate flash and it is recognized as Zeus Flash Device, but S1 tools is unable to flash this phone as it is not supported as it is a prototype (IMEI 0044). So now i am stuck with a bricked phone, anyone able to help me unbrick it? ): Help is much appreciated!
I bricked my xperia Z
someone broke my screen :crying:, and I bought one on eBay:fingers-crossed: , and now you boot:crying:
LED flashes three times ,
with charger LED remains red ,
when i remove the battey and connect the usb on windows and the phone boot in fastboot
if i connect the usb without press any button windows detects in flash mode
i can flash any rom with FlashTool but still without booting
the software Sony emma detect the phone and sais" locked phone detected"
need some help to ressurect y Z:crying:
webmasda said:
I bricked my xperia Z
someone broke my screen :crying:, and I bought one on eBay:fingers-crossed: , and now you boot:crying:
LED flashes three times ,
with charger LED remains red ,
when i remove the battey and connect the usb on windows and the phone boot in fastboot
if i connect the usb without press any button windows detects in flash mode
i can flash any rom with FlashTool but still without booting
the software Sony emma detect the phone and sais" locked phone detected"
need some help to ressurect y Z:crying:
Click to expand...
Click to collapse
1rst: did you buy a new screen or a new phone?
2nd: how do you remove the batery?
try pc companion repair
1st bought a new screen
2nd battery can be unplugged because I have not yet joined the back cover
3rd* PC Companion detects a second and immediately loses and can not continue the process
hi
pls i have e6533_xperia_z3+ phone before flash work normal only problem lock code i flash with wrong flash now my phone dead and dead boot, when connect it to PC, show in manager device this driver:
SEMC Flash Device, but flash tool do not detect it
please I need fast help
Does your phone have any LED light indications? Eg: when you charge your phone or try to turn it on? Sony logo when you turn on?
phone has damaged boot,no solution yet
Hello guys
My xperia zr device got hard bricked after flashing by twrp recovery official edition
I made a restart then the device got dead.
1-I tried to press power button the device viberated but nothing else.
2-I tried to connect the device using xperia companion but still nothing.
3-My device only detected as S1 Service !!!.
4-I tried to flash it using S1 tool using the emergency mode by the test point after disassemble the motherboard.
but the pc got hanged then I got this error (
llbug: [\\?\USB#Vid_0E0F&Pid_0001#6&1636b011&0&2#{a5dcbf10-6530-11d2-901f-00c04fb951ed}] open error: "Access is denied")
anybody can help?