in the box, redmi 6 provides 5V 1A charger, which is too small and slow for me. is it save if I use other original xiaomi charger from other device/series (such as redmi 4 series which have 5V 2A power)?
For me slow charging is perfect for battery life.
fiki_a said:
in the box, redmi 6 provides 5V 1A charger, which is too small and slow for me. is it save if I use other original xiaomi charger from other device/series (such as redmi 4 series which have 5V 2A power)?
Click to expand...
Click to collapse
yes
Unfortunately, our devices have limited charging to 1A. The use of higher current chargers will not hurt, while the charging phase, unfortunately, will not accelerate :/
But remember that's a good point for battery life.
bilatche said:
But remember that's a good point for battery life.
Click to expand...
Click to collapse
Yes, I know But that it wasn't good If you can only charge you phone for a 30 minutes and you need go outside you home and use GPS :/
Devhost97 said:
Unfortunately, our devices have limited charging to 1A. The use of higher current chargers will not hurt, while the charging phase, unfortunately, will not accelerate :/
Click to expand...
Click to collapse
What? Is the Redmi 6's charging speed limited to 1A? I thought it could use 2A like any modern smartphone
Related
hi all is it safe to charge lg 4x with galaxy note 1 charger and thank you
umbrella android said:
hi all is it safe to charge lg 4x with galaxy note 1 charger and thank you
Click to expand...
Click to collapse
yes it is, all android chargers are the same, i charge mine with an xperia, and a samsung charger and its ok... :good:
jonteftw1 said:
yes it is, all android chargers are the same, i charge mine with an xperia, and a samsung charger and its ok... :good:
Click to expand...
Click to collapse
thanks buddy
jonteftw1 said:
yes it is, all android chargers are the same, i charge mine with an xperia, and a samsung charger and its ok... :good:
Click to expand...
Click to collapse
That's not true. Well, it might be, but you should to check _all_ different chargers to tell ot for sure. If the delivered electric potency (i.e. the voltage value) is the same, you can use the same charger even if the electric current output is higher (of course in reasonable limits, if you charge with a 3A charger if the device is certified for 1.5A, it's very likely to damage the board). I used to use a 1A HTC charger with my Galaxy R the original charger of which delivers 0.8A and it caused no problems.
Sent from my LG-P880
Adam77Root said:
That's not true. Well, it might be, but you should to check _all_ different chargers to tell ot for sure. If the delivered electric potency (i.e. the voltage value) is the same, you can use the same charger even if the electric current output is higher (of course in reasonable limits, if you charge with a 3A charger if the device is certified for 1.5A, it's very likely to damage the board). I used to use a 1A HTC charger with my Galaxy R the original charger of which delivers 0.8A and it caused no problems.
Sent from my LG-P880
Click to expand...
Click to collapse
thank you very much for your respond but
the lg 4x charger output is 5V / 1.2A
and note 1 charger output is 5V / 1.0A
is it safe in my case
umbrella android said:
thank you very much for your respond but
the lg 4x charger output is 5V / 1.2A
and note 1 charger output is 5V / 1.0A
is it safe in my case
Click to expand...
Click to collapse
Yes, it is. The charging will be a bit slower though.
Sent from my LG-P880
Hi to all
Just ordered a new EVA-AL00 from eBay last night. I am living in Canada. May I know which charger I should order to take advantage of the quick charging capability of the P9 ?
Is P9 using QC 2.0 or 3.0 ?
Please kindly advise ASAP.
gomcse2002 said:
Hi to all
Just ordered a new EVA-AL00 from eBay last night. I am living in Canada. May I know which charger I should order to take advantage of the quick charging capability of the P9 ?
Is P9 using QC 2.0 or 3.0 ?
Please kindly advise ASAP.
Click to expand...
Click to collapse
P9 doesn't support fast charging
Sent from my EVA-L19 using XDA-Developers mobile app
Akhayev said:
P9 doesn't support fast charging
Sent from my EVA-L19 using XDA-Developers mobile app
Click to expand...
Click to collapse
HI
wrong! fast charging is supported by huawei fast charger
but only with this charger i tryed with asus 5v2A/ 9v2A but dont working
anyone who can provide a link to where i can buy one with an eu plug?
I'm considering buying this phone over the S7 (although still undecided) and I still don't get the battery thing (charging or battery life, I get people telling me all sorts of contradictory things that I'm having a hard time to fact check). That 9V/2A charger doesn't come with the phone, right? How much faster is that Huawei charger compared with the 5V that comes with the phone and what is it called since I can't find it on their site or anywhere? Is that the Mate 8 charger?
Yes it's mate 8 charger
Отправлено с моего EVA-L09 через Tapatalk
raber111 said:
Yes it's mate 8 charger
Отправлено с моего EVA-L09 через Tapatalk
Click to expand...
Click to collapse
Cheers! :good:
scedric57 said:
HI
wrong! fast charging is supported by huawei fast charger
but only with this charger i tryed with asus 5v2A/ 9v2A but dont working
Click to expand...
Click to collapse
Awesome! I need an Australian version of this, what do i search for; is it just a mate 8 charger?
Well, no EU plug still available. But it will be later I think. It is not QC 2 or 3, it won't work. Search for "Huawei 9V 2A Charger".
The result should be like this: http://www.ebay.com/itm/Original-9V...hash=item280f7d97a4:m:mNQwKZr7I5KHReS9CA2RwkA
As I metioned, no EU plug yet, so via adapter only.
Milamber said:
Awesome! I need an Australian version of this, what do i search for; is it just a mate 8 charger?
Click to expand...
Click to collapse
Perhaps this one? http://www.ebay.com/itm/Genuine-Ori...-2A-FAST-AC-Wall-Travel-Charger-/351744631869 (NB I haven't tried it)
tnhh said:
Perhaps this one? http://www.ebay.com/itm/Genuine-Ori...-2A-FAST-AC-Wall-Travel-Charger-/351744631869 (NB I haven't tried it)
Click to expand...
Click to collapse
Perfect, he had 3 and I nailed 2 of them
Hopefully these will quick charge.
Please post results!
The photo shows it is 5V 2A charger, so it is a standart, not a Huawei Quick Charge (9V 2A).
scedric57 said:
HI
wrong! fast charging is supported by huawei fast charger
but only with this charger i tryed with asus 5v2A/ 9v2A but dont working
Click to expand...
Click to collapse
Just a quick question, what's the charging time with that charger? Does it go below the 2 hours for a full charge?
Kutusov said:
Just a quick question, what's the charging time with that charger? Does it go below the 2 hours for a full charge?
Click to expand...
Click to collapse
hi i never look before
i just charge now at 21h59 and 46% i will post the result at 100%
Edit: 100% at 23h02 ( 54% in 1h00 approximatly) but when i have the time i will try a full charge because the fast charge is more active at the start and midle of charging
With this Aukey charger I got from 5 to 95% in about 90 minutes
ladxxdal said:
With this Aukey charger I got from 5 to 95% in about 90 minutes
Click to expand...
Click to collapse
Aukey isn't compatible hisilicon fast charge
Aukey charge at 5V 2.5A no regulation so peraphs no good for the live of the battery
scedric57 said:
Aukey isn't compatible hisilicon fast charge
Aukey charge at 5V 2.5A no regulation so peraphs no good for the live of the battery
Click to expand...
Click to collapse
to be confirmed
scedric57 said:
Aukey isn't compatible hisilicon fast charge
Aukey charge at 5V 2.5A no regulation so peraphs no good for the live of the battery
Click to expand...
Click to collapse
It's fine, it will charge as a standard charger at 5V. I would have to brush up my Ohm's law but I don't even get why Huawei's standard charger on the P9 has 2 Amp electric current value. What matters is the voltage going into the battery and you don't need a 2 Amp charger to give you 5 volts, a regular 1amp will be able to do that. The only difference I know is that 5V at 1 amp are 5 watts and 5V at 2 amps are 10 W. But that has only to do with resistance, I think, a battery isn't fed on watts?
I'm really on the fence about this fast charging thing now. I never got it. Qualcomm's has its QC 2.0 tech but a Motorola charger is faster than any other. An S7 Edge with amuch bigger battery charges as fast as an HTC 10 and the Edge has a 2.0 QC and the HTC is 3.0. The G5 is also 3.0 and charges way faster than the HTC, even compensating for the different battery capacity. And I own a G2 which has no fast charging at all and will charge from 0 to 100% in less than 2 hours on a 5V generic charger, which isn't very far off the times I see with 3000mah batteries and Quick Charge 2.0 or 3.0... Why these differences?? No idea... Somehow I think battery chemistry has a lot to do with it (it does in the RC and electronic cigarette world) but I never see anyone addressing that.
^^^^sorry for the rambling, just thinking/writing out loud
Kutusov said:
It's fine, it will charge as a standard charger at 5V. I would have to brush up my Ohm's law but I don't even get why Huawei's standard charger on the P9 has 2 Amp electric current value. What matters is the voltage going into the battery and you don't need a 2 Amp charger to give you 5 volts, a regular 1amp will be able to do that. The only difference I know is that 5V at 1 amp are 5 watts and 5V at 2 amps are 10 W. But that has only to do with resistance, I think, a battery isn't fed on watts?
Click to expand...
Click to collapse
Nearly right! A little analogy may help... Think of Voltage (V) as the diameter of the water tap, Ampage (A) as the speed of the water through the tap and Wattage (W) as how quick you want the bath the taps are filling!
So you can see, a small diameter tap but high water speed will still not fill bath very quickly, neither will a big diameter tap and slow water speed...you need both together. So 9V2A should charge quicker than 5V2A (18W compared to 10W).
As I understand it the P9 will accept charging at 9V and 2A (their Fast Charging) giving max 18W input so a 9V2A charger should give the best results (which is what the P8's fast charger is)...and what the qualcomm quick charge 2.0 (and 3.0) spec can provide. Now i'm not saying the P9 is a qualcomm quick charge phone, it's not, but my QC2.0 and 3.0 car chargers certainly charge my phone quicker than the included mains charger! So i suspect that the car chargers are providing 9V2A to the phone.
Whether this means any 9V2A charger would do......I don't know
so I just bought p8 lite 2017 model and everything is good so far but as it comes with only 1 Amp charger , charging time is very long almost 3 hours .... so anyway to increase charging speed?? can I use 2Amp charger?? will it effect my battery if use 2A charger??
I use 2amps, it charges faster and battery is still great.
MobileTechArena said:
I use 2amps, it charges faster and battery is still great.
Click to expand...
Click to collapse
but phone is new so may be 2 amps charger decreases battery life with time?? need some expert opinion
I am using my quickcharge Charger from my old S6.
Works great, no issues and its really fast. (about 1,25 hours)
Greetings from Germany
n70shan said:
but phone is new so may be 2 amps charger decreases battery life with time?? need some expert opinion
Click to expand...
Click to collapse
Also using a 2 amp charger, charges the phone real fast..
TheOldMan said:
I am using my quickcharge Charger from my old S6.
Works great, no issues and its really fast. (about 1,25 hours)
Greetings from Germany
Click to expand...
Click to collapse
What's the output of those?
TheOldMan said:
I am using my quickcharge Charger from my old S6.
Works great, no issues and its really fast. (about 1,25 hours)
Greetings from Germany
Click to expand...
Click to collapse
yea that chargers charges quickly but it can decrease battery life over time more .... anyways Germany is great .. BMW ROCKS !
n70shan said:
so I just bought p8 lite 2017 model and everything is good so far but as it comes with only 1 Amp charger , charging time is very long almost 3 hours .... so anyway to increase charging speed?? can I use 2Amp charger?? will it effect my battery if use 2A charger??
Click to expand...
Click to collapse
I'm using a 5v 2.1 amp charger with no issues. Full charge takes about 1hr 20 mins
Hi.
I got 5V 1A (HW-050100E01) with my PRA-LX1
Would be better to change it for 5V 2A (HW-050200E01) or 9V 2A (HW-059200EHQ)?
Trin32 said:
Hi.
I got 5V 1A (HW-050100E01) with my PRA-LX1
Would be better to change it for 5V 2A (HW-050200E01) or 9V 2A (HW-059200EHQ)?
Click to expand...
Click to collapse
5V must be! 9V would damage the phone! Careful
Dejan Kruljac said:
I use 2amps, it charges faster and battery is still great.
Click to expand...
Click to collapse
Are you sure a 2AMP charger makes a difference compared to the stock charger that ships with the phone? Could you download an app that measures the charging rate & post a screenshot of the charging rates?
I've tried charging with both a 2AMP charger and the stock & the results are the same, I see no difference in charging speed & no difference is shown on the "Ampere" app, both charges at around a max of 980ma with screen on (I assume it goes up to 1A, when screen is off).
yaseershahid said:
Are you sure a 2AMP charger makes a difference compared to the stock charger that ships with the phone? Could you download an app that measures the charging rate & post a screenshot of the charging rates?
I've tried charging with both a 2AMP charger and the stock & the results are the same, I see no difference in charging speed & no difference is shown on the "Ampere" app, both charges at around a max of 980ma with screen on (I assume it goes up to 1A, when screen is off).
Click to expand...
Click to collapse
Sorry, i changed like 4 different phones since that post.
Try to use 5V 1.5 A charge perfect and fast about 1.30 full , and no affect battery , im not using stock charger with 1A because charge very slow.
Hi ! I had 2 charger for my Oneplus 3 and cable usb type -c ( I had 3 cable usb type-c ugreen too but no charger)
Can I use my Dash charger with my mi 8 ? I had buy a mi 8 and receive it tomorrow global version with EU charger but don't know wich charger it Qc 3.0 or 4.0 ? And with my oneplus Dash charge is 5v 4amp can work on mi 8 or do buy another charger ? Thank you
ggkameleon said:
Hi ! I had 2 charger for my Oneplus 3 and cable usb type -c ( I had 3 cable usb type-c ugreen too but no charger)
Can I use my Dash charger with my mi 8 ? I had buy a mi 8 and receive it tomorrow global version with EU charger but don't know wich charger it Qc 3.0 or 4.0 ? And with my oneplus Dash charge is 5v 4amp can work on mi 8 or do buy another charger ? Thank you
Click to expand...
Click to collapse
it will charge at normal speed. I tried myself with original oneplus car dash charger, no fast charging for Mi8.
lockmunk said:
it will charge at normal speed. I tried myself with original oneplus car dash charger, no fast charging for Mi8.
Click to expand...
Click to collapse
Ok thanks. I can use it no mistake but slow. I think buy a qc 3 or 4 it's good. For car I have too dash car and it's so good I loose it. I have car charger qc 2 or 3 I don't know.
Thanks
Rommco05 said:
DASH charger is good for OP, strange for others. Highly not recommended to use DASH on other devices than OP
Click to expand...
Click to collapse
Why not?
It is a very good 5V charger, with Xiaomi you can expect up to 2A current, not more. Perfectly safe to charge anything, however not quickest charging option for others.
Rommco05 said:
RIP battery. Do u think it is good charging phone with no original charger? Especially with OP DASH
Click to expand...
Click to collapse
Bull*hit....
Dash charging just doesnt work on mi8, normal charge will not cause any damage on any other phone or their battery.
you do not necessarily need a original charger from your phone manufacturer.
The phone negotiate how much power the battery gets not the charger ... the charger slows down the load balance to 2,4A (2,4A*5V=12W)
With a 2,4A output you'll reach ~12W at peak due to cable limitations you'll get 10w
QC 3.0 reach ~ 18 watt on peak with variable voltage and ampere steps. (3,6 - 20v)
Same on Dash Charge, Dash uses variable voltage and ampere steps like QC but doubles the charging lanes.
You can charge your phone with any charger you get, the worst you can get is slower charging speed.
tomsag said:
Why not?
It is a very good 5V charger, with Xiaomi you can expect up to 2A current, not more. .
Click to expand...
Click to collapse
Bull****, the original MI 8 charge is QC 3.0 and I'm getting up to 3.3A on it.
It's very fast..
---------- Post added at 10:39 AM ---------- Previous post was at 10:36 AM ----------
Flash-User said:
Bull*hit....
Dash charging just doesnt work on mi8, normal charge will not cause any damage on any other phone or their battery.
you do not necessarily need a original charger from your phone manufacturer.
The phone negotiate how much power the battery gets not the charger ... the charger slows down the load balance to 2,4A (2,4A*5V=12W)
With a 2,4A output you'll reach ~12W at peak due to cable limitations you'll get 10w
QC 3.0 reach ~ 18 watt on peak with variable voltage and ampere steps. (3,6 - 20v)
Same on Dash Charge, Dash uses variable voltage and ampere steps like QC but doubles the charging lanes.
You can charge your phone with any charger you get, the worst you can get is slower charging speed.
Click to expand...
Click to collapse
What he said.
Rommco05 said:
I see, probably u never heard about optimization, calibration and testing btw and that's isn't about fast or slow charging
Click to expand...
Click to collapse
OKay its just your opinion but my opinion is you have no insight in electrical topics or the insight of such an charger.
optimization - the charger doesn't overcharge or use an overvoltage on your phone when its not support their specific fast charge technology it simply slow down to 5v - max. 2.4A, these charging speed will never cause any damage on your phone.
its just simple: an QC phone doesnt use the benefits of SuperCharge technology or Dash Charge and vize versa....
And trust me i've done more calibration and testing in USB charging topics and their different Charging tecnologys as you think (mobile batterys, chargers and so on).
I had several phones and several chargers and compared nearly all of them (QC, FastCharge, VOOC) and there is absolutely nothing dangerous to charge a phone with a QC charger if it is a supercharge phone.
But .... you ever can prove the contrary. I'll never stop learning but you have to tell me some facts.
I wanted to know if this phone supports usb power delivery. It can be seen that it supports qc 4, but is power delivery possible?
allajagat said:
I wanted to know if this phone supports usb power delivery. It can be seen that it supports qc 4, but is power delivery possible?
Click to expand...
Click to collapse
It does work. I've used it to charge other phones, power my chess board, and charge a controller.
deekjx said:
It does work. I've used it to charge other phones, power my chess board, and charge a controller.
Click to expand...
Click to collapse
So what is the charging speed and charging time with pd compared to 18w charger and 30w charger?
allajagat said:
So what is the charging speed and charging time with pd compared to 18w charger and 30w charger?
Click to expand...
Click to collapse
When I charge the ROG Phone II using my Mate 10 Pro, i get a rate of 0.91 amps. When I charge my Mate 10 pro with the ROG Phone II, I get 0.48 amps.
ROG Phone 2 => 0.48 amps => Mate 10 Pro
ROG Phone 2 <= 0.91 amps <= Mate 10 Pro
edit: I should add I took these measurements with an inline external meter.
deekjx said:
When I charge the ROG Phone II using my Mate 10 Pro, i get a rate of 0.91 amps. When I charge my Mate 10 pro with the ROG Phone II, I get 0.48 amps.
ROG Phone 2 => 0.48 amps => Mate 10 Pro
ROG Phone 2 <= 0.91 amps <= Mate 10 Pro
edit: I should add I took these measurements with an inline external meter.
Click to expand...
Click to collapse
I'm sorry but i don't know what these numbers mean. Can you please explain in layman terms? Or just the time taken for full charge using pd.
allajagat said:
I'm sorry but i don't know what these numbers mean. Can you please explain in layman terms? Or just the time taken for full charge using pd.
Click to expand...
Click to collapse
USB is about 5 volts which makes 0.91 amps about 4.55 watts and 0.48amps about 2.4 watts. You multiply the amps and the volts to get the watts.
allajagat said:
I wanted to know if this phone supports usb power delivery. It can be seen that it supports qc 4, but is power delivery possible?
Click to expand...
Click to collapse
I think I miss understood what you were asking. You want to know if I used a charger using the USB PD standard to charge the Rog Phone II. I have not tested or tried this. What I tested was using the Rog Phone II to deliver power to other devices via its USB port.
Lol
The charger that comes with the phone, isn't that PD?
the 30W charger that comes with the phone is a QC4.0 PD3.0 charger that charges at 10v 3 amp if I'm not mistaken? I don't have the charger.
deekjx said:
I think I miss understood what you were asking. You want to know if I used a charger using the USB PD standard to charge the Rog Phone II. I have not tested or tried this. What I tested was using the Rog Phone II to deliver power to other devices via its USB port.
Click to expand...
Click to collapse
Oh my.. That's why i was so confused.
stealthj said:
Lol
The charger that comes with the phone, isn't that PD?
the 30W charger that comes with the phone is a QC4.0 PD3.0 charger that charges at 10v 3 amp if I'm not mistaken? I don't have the charger.
Click to expand...
Click to collapse
Oh.. Is it? I too am unaware of it. I myself ordered a PD charger from china thinking it would work, so asked the question
allajagat said:
Oh.. Is it? I too am unaware of it. I myself ordered a PD charger from china thinking it would work, so asked the question
Click to expand...
Click to collapse
Yes Sir!
The Asus 30Watt that comes with the phone is a QC4.0 PD3.0 compatible charger
I think the charging block has to be capable of charging in 200mv increments. If it only does 9v or 12v, we won't get that max charge I think, because to get to 30 watts, the phone needs to draw at 10 volts
The new blocks allow for variable voltage in 200mv increments I think , which the phone needs to pull. But if the block says QC4.0 but only supports 9v or 12v and nothing in between, then it won't work, it looks like
I have spent a lot of time with these charging blocks as you can tell hahaha
stealthj said:
Yes Sir!
The Asus 30Watt that comes with the phone is a QC4.0 PD3.0 compatible charger
I think the charging block has to be capable of charging in 200mv increments. If it only does 9v or 12v, we won't get that max charge I think, because to get to 30 watts, the phone needs to draw at 10 volts
The new blocks allow for variable voltage in 200mv increments I think , which the phone needs to pull. But if the block says QC4.0 but only supports 9v or 12v and nothing in between, then it won't work, it looks like
I have spent a lot of time with these charging blocks as you can tell hahaha
Click to expand...
Click to collapse
I ordered this one (
https://s.click.aliexpress.com/e/KFk8OCTO) along with type c to type c cable with 3A support. So will it work with ROG 2?
allajagat said:
I ordered this one (
https://s.click.aliexpress.com/e/KFk8OCTO) along with type c to type c cable with 3A support. So will it work with ROG 2?
Click to expand...
Click to collapse
I'm not sure, it does not say 10volts. You will be able to see if it says 10 volts or 3 amps because it says that is has a display on it... the description says 9v or 12v, bu it also says automatically adjust current to your phone and that's the way QC4.0 works so hopefully it works!
Let us know!!
stealthj said:
Yes Sir!
The Asus 30Watt that comes with the phone is a QC4.0 PD3.0 compatible charger
I think the charging block has to be capable of charging in 200mv increments. If it only does 9v or 12v, we won't get that max charge I think, because to get to 30 watts, the phone needs to draw at 10 volts
The new blocks allow for variable voltage in 200mv increments I think , which the phone needs to pull. But if the block says QC4.0 but only supports 9v or 12v and nothing in between, then it won't work, it looks like
I have spent a lot of time with these charging blocks as you can tell hahaha
Click to expand...
Click to collapse
Keep in mind that the Asus charger is 30W but only 25W is for the phone and 5W is reserved for accessories.
resident0915 said:
Keep in mind that the Asus charger is 30W but only 25W is for the phone and 5W is reserved for accessories.
Click to expand...
Click to collapse
So what does that mean? Does that mean the draw from the power block to the phone will be 10 volts at 2.5 amps? Or will it still draw the 30 watts? or Only draw the 30 watts when there is an accessory connected?
Can you elaborate what happens in this case?
stealthj said:
So what does that mean? Does that mean the draw from the power block to the phone will be 10 volts at 2.5 amps? Or will it still draw the 30 watts? or Only draw the 30 watts when there is an accessory connected?
Can you elaborate what happens in this case?
Click to expand...
Click to collapse
Think of it as 25W is the max charging speed for the battery. But, as the charger has 5W more it will be passed through to the accessories when they are connected to the phone .
Mad_Duke said:
Think of it as 25W is the max charging speed for the battery. But, as the charger has 5W more it will be passed through to the accessories when they are connected to the phone .
Click to expand...
Click to collapse
At 58% battery I get 9.31v at 2.51 amps for a total of 23.36 watts with the stock charger. It might be higher at a lower battery level.
deekjx said:
At 58% battery I get 9.31v at 2.51 amps for a total of 23.36 watts with the stock charger. It might be higher at a lower battery level.
Click to expand...
Click to collapse
Every phone will charge the battery higher at 0% and then slow down as you approach 100%. So that is normal!
allajagat said:
I wanted to know if this phone supports usb power delivery. It can be seen that it supports qc 4, but is power delivery possible?
Click to expand...
Click to collapse
I've connected it to the Apple Macbook Pro charger (60W one? ) and it chrged normally with 15W fast charge icon.
I want to ask dose the rog phone support QC 3.0?
masl100 said:
I want to ask dose the rog phone support QC 3.0?
Click to expand...
Click to collapse
Yes, it will be fine, it'll just charge a little slower, but that's not really a bad thing