Related
I was looking around for a way to use the gear VR with Cardboard apps and all I could find was to just not insert the usb all the way or tuck it under the micro usb plug, I knew there had to be a better way. There is. With this easy trick you can use all the Cardboard apps and watch SBS 3D using a player like BS player easy.
Here's how to use the Gear VR outside of the native Oculus app, and it's soooo easy. Note: You'll need to be rooted for this to work.
1. download the App Quarantine app from the play store and install it.
2. Create a widget and select the App Quarantine widget. Select the "Gear VR Service" as the app to freeze/defrost.
Bam, that's it. When you want to use a Cardboard app just click the widget, then lock icon, and then load the Cardboard app you want to use before inserting the phone into the headset. If you want to watch a SBS 3D movie in BS player just load it, pinch to zoom out a bit (fiddle with this to get it to your liking), click play and put on the headset and you're set. With a BT game controller you can even control the the playback.
When you're ready to go back to the Gear, just click the widget again and then the unlock icon. So simple...
If this helped give me a thanks below! Have fun, this headset rocks!!!!
Edit: Just to clarify, this will only work with Cardboard apps that don't require the magnetic clicker. However, I have found if you have a high power neodymium magnet laying around you can just swipe it by the end of the headset (kind of quickly) and it will trigger the clicker. Kinda lame for shooter games, but it's a workaround...
Nice. I'm going to try it, before Google or Samsung fives it
It also works to just put the phone in below the microusb plug - it fits fine..
diomark said:
It also works to just put the phone in below the microusb plug - it fits fine..
Click to expand...
Click to collapse
I know, mentioned that in the first paragraph. Just don't think it's a good idea to put the unesacerry strain on the USB connector and have a less than secure fit (don't want the phone crashing to the floor). This only takes 2 seconds to do and allows for a secure docking of the phone.
The Note will need this connectivity if 3rd party devs are going to use the tracking data from the headset in their apps. Way lower latency than using the phone's sensors...
AspenMan said:
I was looking around for a way to use the gear VR with Cardboard apps and all I could find was to just not insert the usb all the way or tuck it under the micro usb plug, I knew there had to be a better way. There is. With this easy trick you can use all the Cardboard apps and watch SBS 3D using a player like BS player easy.
Here's how to use the Gear VR outside of the native Oculus app, and it's soooo easy.
1. download the App Quarantine app from the play store and install it.
2. Create a widget and select the App Quarantine widget. Select the "Gear VR Service" as the app to freeze/defrost.
Bam, that's it. When you want to use a Cardboard app just click the widget, then lock icon, and then load the Cardboard app you want to use before inserting the phone into the headset. If you want to watch a SBS 3D movie in BS player just load it, pinch to zoom out a bit (fiddle with this to get it to your liking), click play and put on the headset and you're set. With a BT game controller you can even control the the playback.
When you're ready to go back to the Gear, just click the widget again and then the unlock icon. So simple...
Click to expand...
Click to collapse
Nice idea but you do need root for that app right? Can the Note 4 be already rooted without tripping the Knox counter?
You do need to be rooted. Haven't seen a way to root without tripping Knox, yet...
2. Create a widget and select the App Quarantine widget. Select the "Gear VR Service" as the app to freeze/defrost.
Where is this? cant find it in list of apps to freeze.
charlie
AspenMan said:
You do need to be rooted. Haven't seen a way to root without tripping Knox, yet...
Click to expand...
Click to collapse
Might need to point that out in a revision, since that means this helps only about 5% of current N4 owners. Boo to no root!
I would like to use my other video players since the player built in does not cover all codecs or AC3.
It appears you must already have made a connection to the Gear VR in order to have the Gear VR Service? I too, cannot see this service anywhere. I have a Exynos model Note 4 (N910U) and it is my understanding that the Exynos models are not yet compatible with the VR. I've been trying to find the service used to auto launch whatever it is the VR auto launches to try and disable that with DisableService but have yet to find this. Any ideas?
callif said:
2. Create a widget and select the App Quarantine widget. Select the "Gear VR Service" as the app to freeze/defrost.
Where is this? cant find it in list of apps to freeze.
charlie
Click to expand...
Click to collapse
Try rebooting your phone and looking for the Gear VR service again. If you have the Gear installed it should be there.
KrakaJap said:
It appears you must already have made a connection to the Gear VR in order to have the Gear VR Service? I too, cannot see this service anywhere. I have a Exynos model Note 4 (N910U) and it is my understanding that the Exynos models are not yet compatible with the VR. I've been trying to find the service used to auto launch whatever it is the VR auto launches to try and disable that with DisableService but have yet to find this. Any ideas?
Click to expand...
Click to collapse
My guess is that you'll have had to make a connection at least once and will definitely need to have installed the Gear apps first. I would install the gear, run through the setup, reboot, put the phone into the gear and then remove it, install the App Quarantine app and then try it. Should work.
AspenMan said:
My guess is that you'll have had to make a connection at least once and will definitely need to have installed the Gear apps first. I would install the gear, run through the setup, reboot, put the phone into the gear and then remove it, install the App Quarantine app and then try it. Should work.
Click to expand...
Click to collapse
This won't work for me or anyone who cannot make that initial connection: we'll have to find another way or wait until the Gear VR supports the Exynos Note 4s. Right now, the N910U will not work with Gear VR until it receives a firmware update supporting it. I received confirmation directly from Samsung about this yet no details as to when the Exynos models will receive support. Way to go, Samsung, for making this perfectly clear to those looking to buy the Gear VR.
KrakaJap said:
This won't work for me or anyone who cannot make that initial connection: we'll have to find another way or wait until the Gear VR supports the Exynos Note 4s. Right now, the N910U will not work with Gear VR until it receives a firmware update supporting it. I received confirmation directly from Samsung about this yet no details as to when the Exynos models will receive support. Way to go, Samsung, for making this perfectly clear to those looking to buy the Gear VR.
Click to expand...
Click to collapse
I would think if the gear app launches when you attach it (even if only to notify you it's not compatible) there has to be a service running. Should be able to freeze it and attach the Gear without the app launching...
If you have no need for the Gear apps just yet (until you can update your phone), just use Titanium backup and freeze any app you see related to the Gear VR and you should be able to attach it to the phone without anything happening. The touchpad should also be recognized as a mouse and volume and back buttons should also work.
AspenMan said:
I would think if the gear app launches when you attach it (even if only to notify you it's not compatible) there has to be a service running. Should be able to freeze it and attach the Gear without the app launching...
If you have no need for the Gear apps just yet (until you can update your phone), just use Titanium backup and freeze any app you see related to the Gear VR and you should be able to attach it to the phone without anything happening. The touchpad should also be recognized as a mouse and volume and back buttons should also work.
Click to expand...
Click to collapse
You're not understanding though... the Exynos models are not compatible with Gear VR, period. When you plug them in you get a black screen and that's it. Nothing gets launched, installed, etc. The Gear VR service is not present until you make that first connection and get the software. I guess the software resides on the Gear VR itself and is pushed to the Note 4? I don't know exactly how it works. I just know it won't work
I also don't know if it's all Exynos models but I know for sure it's not compatible with N910U.
I have an Exynos version and I was able to successfully stop the gear vr service.
Download an app called Disable Service and you should see the Gear VR Service there. Just force it to stop.
Alternatively, you can go into Settings, Applications Manager and Force it to Stop from there.
Once Stoped, it should work.
One thing I noticed though, was that Im having difficulties finding good convergence with other apps. I dont know whether this is due to my large IPD (73) or due to the fact that these apps are not optimized for the Gear VR.
Theres cool app for cinema called Cmoar VR cinema, but I was unable to find proper focus with this app.
lucianolsp said:
I have an Exynos version and I was able to successfully stop the gear vr service.
Download an app called Disable Service and you should see the Gear VR Service there. Just force it to stop.
Alternatively, you can go into Settings, Applications Manager and Force it to Stop from there.
Once Stoped, it should work.
One thing I noticed though, was that Im having difficulties finding good convergence with other apps. I dont know whether this is due to my large IPD (73) or due to the fact that these apps are not optimized for the Gear VR.
Theres cool app for cinema called Cmoar VR cinema, but I was unable to find proper focus with this app.
Click to expand...
Click to collapse
And what's your baseband? ANK5? ANK7? I'm N910U (Hong Kong) ANJ5 and the Gear VR service does not exist. We have yet to receive the firmware update making this model compatible with Gear VR.
hum... didnt know that.
My baseband is NK5.
IF I disable the service, I can connect to the usb no problem.
lucianolsp said:
hum... didnt know that.
My baseband is NK5.
IF I disable the service, I can connect to the usb no problem.
Click to expand...
Click to collapse
I'm tempted to try Taiwan ANK7. I've never done that before though... that should work right? Both models are N910U.
I still can't get the widget to show the vr services, when I go direct to the app I see the VR services just fine ... Damn you, tricky VR
just got my gear vr that i ordered from the states but can not get it setup, i assume i need the gear vr manager apk. when i put my phone in it says on the display to take the phone out and install the software and it does but then says I need to update my phone could someone post the apk and I will see what happens thanks.
erik10002 said:
just got my gear vr that i ordered from the states but can not get it setup, i assume i need the gear vr manager apk. when i put my phone in it says on the display to take the phone out and install the software and it does but then says I need to update my phone could someone post the apk and I will see what happens thanks.
Click to expand...
Click to collapse
its not an apk, i tried the apk still didnt work you need the newer firmware, im with telus. obviously will need root to do this.
Downlaod apk should work. https://www.dropbox.com/s/2cmbkeyamj...dStub.apk?dl=0
install ael kernel v5, clear cache dalvik, reboot
download apk from above link
After downloading apk you wont see that app, I used Nova, created a shortcut, chose activities, then vrsetupwizardstub, then samsung gear vr, then hit the created shortcut and done. or you can download quick short cut maker from the play store
then when you install phone into gear vr the first time everything should be golden!
Was going to try and avoid having to root but I don't have much patience to wait for lollipop and don't want $200 collecting dust so I will try this. Thanks
*you link is not working though*
Can you also link me to the thread for that kernel thanks
Alight let's try again.
Kernel http://forum.xda-developers.com/not...pment/30-november-2014-n4-ael-kernel-t2961240
Vr setup apk https://mega.co.nz/#!7xd2xDob!uqqCiYYpTaDIoenAK4H-cBTineKRG4xiTp-ZlVb6P98
Dk 3.0 rom in t-mobile android dev forum
1. Flash rom first
2. Flash kernel right after do not boot after flashing the rom! or it will bootloop. If you do then boot into recovery and flash kernel
3. After downloading apk you wont see tha app, I used Nova, created a shortcut, chose activities, then vrsetupwizardstub, then samsung gear vr, then hit the created shortcut and done. or you can download quick short cut maker from the play store
then when you install phone into gear vr the first time everything should be golden!
Cant I use the kernel with just the stock bell mobility rom one rooted?
Mine wouldn't boot with the stock Telus kernel. Plus ael is really nice. Try it if works great if not flash ael.
Flashed all on top of my bell stock rom and it worked, ran the vr setup and still didn't work then realized that it is most likely the phone software/build that needs to be a newer version. Just Flashed dk 3 with ael kernel and will try setup and report back.
I have cm12 on my note the unofficial version is there anything I can do to make the setup.work on this rom
i flashed firekat with the ael kernel and when i start up the vrsetup wizard it still tells me my phone needs to be upgraded, what am i doing wrong?
edit: figured it out, if you are installing firekat you have to install the version 7 regular version not the canadian one, then flash AEL on top and it works.
still wondering if its possible though to get this going on AOSP.
VR app with Google Cardboard
Hi friends! One question... is posible to launch VR app without Samsung Gear VR? For example to use Google Cardboard with my Note 4? haha
jdnichollsc said:
Hi friends! One question... is posible to launch VR app without Samsung Gear VR? For example to use Google Cardboard with my Note 4? haha
Click to expand...
Click to collapse
I would like to know this.I am trying to do this,but i didn t find way anywhere
Anyone? I'm trying to do the same thing. Didn't know that it's an exclusive app that is only enabled with the Gear VR.
ThaiM said:
Anyone? I'm trying to do the same thing. Didn't know that it's an exclusive app that is only enabled with the Gear VR.
Click to expand...
Click to collapse
I've tried this several times to see if i can get Oculus Home to run properly with a Google Cardboard. Furthest I can tell you I got was loading up developer mode in Gear VR service to run downloaded apps from the Oculus store. Depending on what kernel and version of lollipop you're running you may run into some odd screen errors. However, low persistence mode should change your screen display to a bright flickering when developer mode is enabled. After loading up a downloaded app/game from oculus within Gear VR service you won't be able to look around because the tracking data is specific to enhancements made by the Gear VR HMD.
Long story short, you could theoretically play bluetooth controller enabled games. You wouldn't have any headtracking
zenoknite said:
I've tried this several times to see if i can get Oculus Home to run properly with a Google Cardboard. Furthest I can tell you I got was loading up developer mode in Gear VR service to run downloaded apps from the Oculus store. Depending on what kernel and version of lollipop you're running you may run into some odd screen errors. However, low persistence mode should change your screen display to a bright flickering when developer mode is enabled. After loading up a downloaded app/game from oculus within Gear VR service you won't be able to look around because the tracking data is specific to enhancements made by the Gear VR HMD.
Long story short, you could theoretically play bluetooth controller enabled games. You wouldn't have any headtracking
Click to expand...
Click to collapse
Yep. I recently figured that out. It uses the headtracking in the Gear VR headset. I originally thought it was just a fancy shell. Apparently now. I wish there was a mod to be able to use the Note 4's gyros. But there are mods out there where people are creating headtracking circuit boards. But that seems out of my league.
ThaiM said:
Yep. I recently figured that out. It uses the headtracking in the Gear VR headset. I originally thought it was just a fancy shell. Apparently now. I wish there was a mod to be able to use the Note 4's gyros. But there are mods out there where people are creating headtracking circuit boards. But that seems out of my league.
Click to expand...
Click to collapse
Yea... I'd say wait for Rift CV1 if you got a good computer. Gear VR is just a novelty piece tbh. You can only use it in short bursts of time until it overheats. I'd say an hour at max without a fan blowing into your face. Don't get me wrong though, it's worth the $99USD price tag to experience and share with family and friends.
marxim4 said:
I would like to know this.I am trying to do this,but i didn t find way anywhere
Click to expand...
Click to collapse
will never work. Not fully. Its optimzed for the Gear VR headset depending on the display size as well.
not sure anybody still cares but i went to a friends house in VT a few weeks back, got a Gear VR delivered to his place by amazon.com, brought it back home (canada) and I have an american VPN and had no issues at all to set it up, I have access to any and all US only content such as MilkVR. It seems, unlike the playstore, the content is geo-restricted and doesnt take into account the billing info on your samsung account. If anybody has issues, try a free VPN, or rent one for a month.
Is anyone still looking/having issues with the Gear VR on Note 4 in canada using the Arcadia lollipop 5.1.1 Rom by Emporia.
My headset worked, asked me (in a vr environment) to remove the headset and install the necessary apps. once complete, it had me re-insert my phone into the headset, only to display a single image of the welcome screen and then hang on the health and safety warning, (that was also in 2d and only viewable in its entirety without the headset on.
if I remove the phone, within a brief second it shows "calibrating" before it realizes it has been disconnected. and the oculus software shuts down.
I appreciate any help anyone could provide, I too hate the idea of the money having been wasted on something that no longer works at all.
I know TrackID use to have an android wear app (app appeared on the watch). I tried to launch trackID from my watch yesterday and noticed the app was not there, though it was on my phone. I do not know if the developers stopped supporting Android Wear or if there is an issue with my watch/phone pairing where this app is not being pushed over.
The reason I am not sure is because in the past I have had issues with apps not appearing on my watch, but that was on previous versions of Android Wear for the LG G Watch R, and I have not experienced that lately. Other apps seem to install just fine, leaving me to believe the issue is with the TrackID app (whether not supported, or an issue with the actual app).
Anybody else notice this?
Cheers,
B.D.
Doesn't appear on my Moto 360 either
Does not appear on my Smartwatch 3 too.... -_-
I wrote to the developers right after posting this question and have not heard back to date.
On the Google Play store it no longer says it is supported on android wear, and somebody else changed their review to reflect that it was no longer supported.
Cheers,
B.D.
Hi, I just got my Gear VR yesterday and really want to use some cardboard stuff as well. I bought Package Disabler Pro and disabled Gear VR Service so it is working, however it is all jittery and I think this is because I haven't been able to enable Developer Mode which will let me take advantage of the gyroscope in the Gear VR.
I have also installed Sideload VR and uploaded my Sig file and installed an app (MindMyths Meditation) with the sig file apparently included.
I don't have an option in PDP for dev mode, and I tried another method with instructions that were for the S6, where you go to Applicatin Manager and Gear VR Service but that doesn't work, because the Application Info screen looks different on the S7.
I don't want to root. Has anyone else with an S7 figured this out? Cheers
it is jittery a bit, but you just tap the build number in the about phone menu 6 times and it enables developer mode.
To get gear developer mode you have to go
Settings
Applications
Application manager
Gear vr service
Storage
Manage storage
Tap gear vr version #
I have done all this and installed an apk with my osig but when I try to enable it I get a message stating "you are not a developer"
Work for me thanks
Sent from my SM-G935T using XDA-Developers mobile app
same here - whats the reason that some can be developer and some not?
s01q said:
same here - whats the reason that some can be developer and some not?
Click to expand...
Click to collapse
Did you try using the sideload VR test.apk? Though mine worked immediately I had to use that one on my wife's phone for it to work.
Well for me I tried sideloadvr with no success I ended up having to sign them myself through command prompt
Cool thing is that you can launch all the Gear VR apps without having it plugged in but unfortunately, the phone does not use its own gyroscope, uses the one in the HMD.
@ chiikko561 how did you sign by hand?
darkphantom said:
Cool thing is that you can launch all the Gear VR apps without having it plugged in but unfortunately, the phone does not use its own gyroscope, uses the one in the HMD.
Click to expand...
Click to collapse
is there any workaround for this?
But, above all: what are the gyros on HMD for, if GearVR compatible phones ALREADY have gyros?!?
So I finally received my Chinese version Mate 20 Pro Emerald variant and I spent the last 24 hours setting it up, now it's finally getting into a more or less stock android feeling. I decided to write a post because man, I've never spent so much effort just trying to setup a new phone.
Ordering
I ordered the phone from Huawei T Mall store on Nov. 11th. I paid about 1250 CAD through Alipay for the phone and ~ 600 RMB having my friend sending it to me via DHL. I also had to pay some import tax getting it into Canada but it's just bad luck, plus the tax really depends on how much you declare the value to be.
First Impression
I had a Oneplus 5, I like the cleanness of its ROM, it's close to stock android and I was using the Rootless Pixel 2 Launcher which makes it essentially a stock Android device. The Mate 20 Pro is a bit heavier than the Oneplus 5 and it's just slightly bigger.
I started with applying the tempered glass screen protectors I bought also from Taobao when I ordered the phone. Sadly I can't seem to get it in the right place, and it's greatly affecting the screen responsiveness and accuracy. I ended up throwing them away.
Turning it on, and I'm already having issue with the initial setup process. First of all, I was asked to create a Huawei ID. But guess what -- I live in Canada but Canada isn't an available option in the region list, somehow US is. I mean, this phone is not even available in US, why would you provide that as an option but not Canada?
I went ahead choosing US as the region. It asked for phone verification, that worked for me because US and Canada share the same country code.
After that, I uninstall a bunch of pre-installed apps -- they are mostly popular apps in China, plus a few useless utilities made by Huawei. I uninstall about 25 apps during this process.
Then I tried to restore all my apps from the old phone, first step would be getting Google Play Service working. Surprisingly Google Play Service is pre-installed. but I wasn't able to update it through the Huawei App Store, because US Huawei ID apparently is not supported. In fact I can't use any of the pre-installed Huawei apps, they are all blocked. So I deleted my account and created a Chinese one instead.
I was able to access the app store and update Google Play Service, along with Play Store. Google backup apparently didn't work. I ended up using the Huawei "Phone Clone" app to transfer all my stuff to this phone. It does the job pretty well.
Getting third party launcher working on Chinese ROM (If you have a global version then this may not apply to you)
Spent sometime getting all the apps logged in and tweaking settings, I started to look into replacing the stock launcher. But then you can't change launcher on the Chinese rom, so I did some research and here is what I did:
1. Install a third party launcher. I chose Nova Launcher here. Never used it before but Rootless Launcher kept crashing and for Rootless Pixel 2 Launcher, there is an annoying security alert saying "Google is using microphone" that kept popping up.
1. Enable developer mode
2. Enable USB Debug
3. Connect the phone to PC
4. Access ADB shell
5. uninstall stock launch: pm uninstall -k --user 0 com.huawei.android.launcher
6. Reboot
A few notes on using this 3rd party launcher hack:
* I also installed the Nova companion app to have Google Feed panel access.
* You need to allow Nova companion to auto-launch in Settings -> Apps -> App Launch, otherwise rebooting the phone will make Google Feed panel disappear.
* If you select gesture navigation in system setting, swiping up from bottom may not work.
Getting Google Assistant to work
The phone has the Huawei voice assistant by default, and changing the default Assistant app to Google doesn't work. The shortcut still only bring up the Huawei voice assistant. The fix is to uninstall the app using the same process above. The package name is com.huawei.vassistant. After reboot, I was able to access Google Assistant using the home button (I still prefer three key navigation). "OK Google" doesn't work on Home screen though.
Make sure push notifications are working
I also noticed I don't receive push notifications most of the time. For example, I have Duo Mobile which is used as an authenticator at work. Having the screen on, I didn't receive the push notification. I had to launch the app manually to see the authentication request. Here is a workaround:
1. Settings -> Apps -> App Launch
2. Find the app you wish to receive push notification
3. Disable auto manage, it will ask you how you want to manage manually, choose Auto-launch and Run in Background at least
Known Issues/Todo list
Here are some of the things that I'm having issue with but haven't figured out a solution yet. Please let me know if you know a solution to any of them:
1. Google Pay Contactless does not work. This is almost a deal breaker. From what I've read, it seems to be just Chinese version doesn't work.
1. LastPass accessibility setting gets reverted to off randomly. This seems to related to when I close all apps using the trashcan button on recent apps screen.
2. Default Assistant app setting mysteriously gets reset to None. Still don't understand why.
3. Text in the notification just look so bad. Also not sure how to tweak that.
4. The security alert for app using microphone keeps popping up in Google Assist and Google Feed. I'm not sure how I should feel about that...
Things I like about this device
1. Chinese version supported dual SIM. I believe the global version does not.
2. photos in low lights are awesome.
3. charging is super fast! I also got the wireless charging thing.
4. I'm happy with its battery performance so far.
5. It's a faster device overall. The games I play run smoother on this phone comparing to Oneplus 5. I understand OP5 is an older phone but that's the only reference point I got.
That's what I had so far. I'm also keeping an eye on the progress of FunkyHuawei Mate 20 Pro support -- I'm looking forward to flash the global version ROM hoping it has better google integration and less chinese-oriented useless "features".
Hope it helps!
Thanks for sharing
Does the device show as being certified in the Google Play Store? If not, this would probably explain why contactless via GP doesn't work
Minotaur said:
Does the device show as being certified in the Google Play Store? If not, this would probably explain why contactless via GP doesn't work
Click to expand...
Click to collapse
Yes it shows as certified in playstore.
henexekrar said:
Yes it shows as certified in playstore.
Click to expand...
Click to collapse
Hmmm interesting... is there an error message or such that might indicate why GPay doesn't work?
Minotaur said:
Hmmm interesting... is there an error message or such that might indicate why GPay doesn't work?
Click to expand...
Click to collapse
when attempting to enable contactless, the following messages appear in order:
contacting your bank...
your bank is verifying your card...
added feature cannot be setup. contact your bank to resolve this issue.
I called the bank and they said they didn't get the request so they don't know what error it is.
I contacted Google and haven't got a response.
Did you already have the card in your GPay wallet, and were re-verifying, or did you add it from scratch? Guessing it may not make a difference though.
Minotaur said:
Did you already have the card in your GPay wallet, and were re-verifying, or did you add it from scratch? Guessing it may not make a difference though.
Click to expand...
Click to collapse
I had the card in the wallet for a long time. Used it with my old phone without issue.
Does it support Band 66? Thanks
Sent from my iPhone using Tapatalk
I was in China last week and almost bought the Mate 20 Pro. After reading many reviews I decided to not buy the Chinese Version and pay a little more to get the Google version from Hong Kong
Any updates?
Were you able to find any way to get LastPass working properly?
Accessibility features keep resetting for me right away.
Hi, have your version finger-id? I bought a mate 20 pro red in aliexpress but i can't find the finger-id......
John_nl_74 said:
Hi, have your version finger-id? I bought a mate 20 pro red in aliexpress but i can't find the finger-id......
Click to expand...
Click to collapse
The LYA-AL00 with 6 GM RAM and 128 GB storage has no fingerprint sensor. It only uses face, pattern, and password unlock.