Here is Vantom Kernel for our Xiaomi Mi 6 by Vantom
Full Credits to @vantoman
DOWNLOAD : http://159.65.193.144/vantom/
LEGACY : [url]http://159.65.193.144/Vantom-F2FS/[/URL]
Features :
Governors
alucardsched
darknesssched
schedalucard
electroutil
pwrutilx
electroutil
IO-Scheduler
noop
deadline
cfq
bfq
fiops
sio
sioplus
tripndroid
zen
maple
GPU
adreno idler
adreno boost
touch and input boost
dynamic stune boost
Miscs
dynmaic fsync
advanced tcp congestion algorithms
soundcontrol
boeffla wakelock control
fingerprint unlock boost
wireguard support
f2fs & ext4 support
sweep2sleep
kcal
spectrum
double tap to wake
DTS-eagle
Requirements
*Unlocked Xiaomi Mi 6 with Project Treble supported custom ROM
*at least basic knowledge about flashing, handling bootloops etc.
*good mood
How to install
After flashing the ROM of your choice just flash the .zip
You want to use f2fs?
* Install this TWRP https://github.com/xiaomi-msm8998/device_xiaomi_sagit/releases/tag/3.2.3-4
Code:
1. Reboot into the F2FS TWRP
2. Select wipe > format data then type yes and reboot into recovery again
3. Then select wipe > advanced wipe select cache then select repair or change file system and select F2FS
4. Do the same step with Data
5.1 Install a supported ROM (AEX Pie or Havoc Pie for now) and flash the Kernel from here: [url]http://159.65.193.144/vantom/[/url]
5.2 Install any Treble ROM and flash the Kernel from here: [url]http://159.65.193.144/Vantom-F2FS/[/url]
6. Reboot into ROM
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Note : The page http://159.65.193.144/is deprecated. @vantoman decided to step back and share his builds on telegram at the channel t.me/mi6rs
Sourcecode : http://159.65.193.144/SRC/
reserved
Lol you shared it ? Okay we shouldn't have been hiding this fuk from the world
Does this kernel require f2fs?
JustinYeh1999 said:
Does this kernel require f2fs?
Click to expand...
Click to collapse
No, you can use it with ext4 too of course
The king has come
Fahrilubis said:
The king has come
Click to expand...
Click to collapse
Share your benchmarking results (screenshots) here lol
And sot and idle times too
were TTL fix?
Any hope to support miui rom? ?
ccelik97 said:
Share your benchmarking results (screenshots) here lol
And sot and idle times too
Click to expand...
Click to collapse
For sot ill update later
Pwrutilx for little and schedutil for big
Gpu v313 treble
Go to root folder sys/module/msm_adreno_tz/parameter/freq/change 414 to 710 save and everytime u got reboot just aplly this value or mb u can use init.d
Fahrilubis said:
For sot ill update later
Click to expand...
Click to collapse
For little used pwriutilx and schedutil for big
Change gpu to 313 treble
Open root folder/sys/msm_adreno_tz/parameter/freq/change 414 to 710
Fahrilubis said:
For little used pwriutilx and schedutil for big
Change gpu to 313 treble
Open root folder/sys/msm_adreno_tz/parameter/freq/change 414 to 710
Click to expand...
Click to collapse
I'm on aex and I have that file in /sys/module/governor_msm_adreno_tz/parameters/boost_freq and the value is not just 414 but is 414000000.
Just telling
good job
Settings > battery - force close
Anyone else can't access the battery options in settings? I tried everything I could to fix it. Any idea whats the problem?
branndonn1 said:
Anyone else can't access the battery options in settings? I tried everything I could to fix it. Any idea whats the problem?
Click to expand...
Click to collapse
That is not kernel related. This kind of questions belong into the rom's thread
helmiau said:
Any hope to support miui rom? ?
Click to expand...
Click to collapse
Yaa, hopefully ??
NeoArian said:
That is not kernel related. This kind of questions belong into the rom's thread
Click to expand...
Click to collapse
Hey bro, I'm on havos OS (pie). Been on havoc for as long as I can remember (for months) and I love the ROM. Never had this issue until I flashed the kernel last night. Sure its not related?
What do Randa and JAWA mean?
JustinYeh1999 said:
What do Randa and JAWA mean?
Click to expand...
Click to collapse
Just fancy names to tell that there're enough changes are made to the source so let's give it a name ? Just download the latest one.
is it just me who thinks that the colors are a little bit faulty ?
colors sound a little different after flashing the kernel
am i wrong ?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FEATURES
- Compiled with Linaro GCC 4.9-2015.03 thanks to christopher83
-frandom support
-Added optimized ARM RWSEM algorithm
-zram bringup
-added input touch boost from franco
-added cpu-boost
-added smartassv2 governer[more will may or may not be added]
-selinux fixes
-fixed memory leak on some places
-speed up FITRIM((more info)
-entropy tweaks
-varies optimizations for speed and stability
-using lz4 compression and decompression
-check my commits here
-using any kernel installer by kaush so compatible with all lollipop roms
CHANGELOG
-monster r1 bringup
DOWNLOAD
click here
INSTRUCTIONS
To install this KERNEL you will need to have a latest custom Recovery such as TWRP 2.8.6.0 or PhilZ installed
Copy the downloaded KERNEL.zip to your phone.
Boot into your recovery
FLASH THE KERNEL
XDA:DevDB Information
monster kernel, Kernel for the Samsung Galaxy Grand Duos i9082
Contributors
coderdroid
Source Code: https://github.com/rishi1998/android_kernel_samsung_i9082
Kernel Special Features:
Version Information
Status: Stable
Created 2015-07-06
Last Updated 2015-07-31
Q: Will you add feature "X" to your kernel?
A: There is one chance that I add it to my kernel. simply post this question in the thread and if I find it usefull, I will implement it. Otherwise not.
Q: What are the best settings for a balanced using between battery saving and performance?
A: This settings are already the default ones. Because this default values are my personal settings, so this will be the best balance between power and battery .
Q: When is the next update coming?
A: As soon as possible. I am working really hard on bringing you a good update. That means also I have to test everything etc. I wont deliver you updates with big bugs! I better take my time and make everything working
mine
mine again
what are you looking at??
I will try...bro plz can u add #DoubleTap2WakeUp in this kernel..by the way nyc name given to the kernel..thnxx in advance:good:
Can I flash it on RR ROM?
Can I flash it on RR ROM?
FINALLY A KERNEL FOR OUR GRAND !
I'll download , test and will report after couple of hours
Thanks
---------- Post added at 07:35 AM ---------- Previous post was at 07:34 AM ----------
hemant4409 said:
Can I flash it on RR ROM?
Click to expand...
Click to collapse
Yes
compatible with all lollipop roms
Click to expand...
Click to collapse
thnQ bro and we will try it but i have a question i have RR and if the kernel is not completely with rom or i didn't like it how i can back to previous one that is included with rom !
and its better than the included with the rom ?
sry about my bad english :'(
Smooth ( using smartassV2 ) but doesn't have too much customization options
I mean Only 6 governor ( smartassV2 , performance , interactive , conservation , ondemand , powersave )
Overclocking limited to 1300
No new I/O Schedulers ( cqf , noop , row , deadline )
advantages: Z-RAM , UKMS
What suggested configuration?
Akash M. said:
I will try...bro plz can u add #DoubleTap2WakeUp in this kernel..by the way nyc name given to the kernel..thnxx in advance:good:
Click to expand...
Click to collapse
+1
Yousef Mohamed said:
Smooth ( using smartassV2 ) but doesn't have too much customization options
I mean Only 6 governor ( smartassV2 , performance , interactive , conservation , ondemand , powersave )
Overclocking limited to 1300
No new I/O Schedulers ( cqf , noop , row , deadline )
advantages: Z-RAM , UKMS
Click to expand...
Click to collapse
use kernel adiutor app to control the kernel
i will not going to add all that fancy stuff which might break the kernel in my stable releases(why anyone would use my kernel if it breaks things ) i have added the most stable stuff in this and for governers take this example i will add 15 to 16 goverers some is causing random reboots ,some heating up the device and some just behaves strangely so will you use my kernel for that? i am not saying i am not going to add the features,i am just saying i will add the feature which i think would be stable but still if you want that stuff i will make some experimental builds
Akash M. said:
I will try...bro plz can u add #DoubleTap2WakeUp in this kernel..by the way nyc name given to the kernel..thnxx in advance:good:
Click to expand...
Click to collapse
this thing breaks the kernel and cannot be called stable but still for you guys as you don't have this feature i will try to bring this to you (no promises as i don't know how it goes)
hemant4409 said:
Can I flash it on RR ROM?
Click to expand...
Click to collapse
yes
an0x said:
thnQ bro and we will try it but i have a question i have RR and if the kernel is not completely with rom or i didn't like it how i can back to previous one that is included with rom !
and its better than the included with the rom ?
sry about my bad english :'(
Click to expand...
Click to collapse
dirty flash the rom again
Please add swap ram support and GPU tweak
@coderdroid
Quick personal opinion, is it better to have standard CPU steps (350-600-800-1200...) or will it be an advantage to have more steps (300-400-500-600...), and how about under clocking, is it possible for our device? As I can't find any kernel did it,yet. Also the GPU tweaking, seems like mostly non doable on our device?
BTW, am dloading your kernel,will report if none did yet(any bugs or anything).
Osm kernel plz add swap support too
Sent from my GT-I9082 using XDA Forums PRO
HOW TO ?
hI,
Please help me I didn't find setting in CM 12.1 , please let me known where to find the kernal settings
Thanks in advance
Elvis
evilrulez said:
hI,
Please help me I didn't find setting in CM 12.1 , please let me known where to find the kernal settings
Thanks in advance
Elvis
Click to expand...
Click to collapse
Install Kernel Auditor app form the Play store
thanks
Yousef Mohamed said:
Install Kernel Auditor app form the Play store
Click to expand...
Click to collapse
thank you very much
Awesome and fastest kernel ever
coderdroid said:
this thing breaks the kernel and cannot be called stable but still for you guys as you don't have this feature i will try to bring this to you (no promises as i don't know how it goes)
Click to expand...
Click to collapse
Thnxx bro..and your kernel is too good...best kernel ever...and this enough for me that you will work on #DoubleTap2WakeUp:angel:...keep working for our grand... and now I'm really feel lucky that I'm having galaxy grand duos:fingers-crossed:
IronStock-Kernel for SM-T800/T805 models
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Supports Touchwiz based on 6.0.1
The aim of this kernel is to be as stock as possible with improved performance and up to date linux version. I included this builds in all IronRom versions but most of you probably want to use it as standalone kernel. So here you go with the new kernel
By the way if you want to visit my rom: IronRom.
IF YOU FOLLOW MY STEPS BELOW, YOU WILL LOSE YOUR WARRANTY, KNOX WILL DISPLAY 0x1! I'M NOT RESPONSIBLE FOR ANY DAMAGED DEVICE!
If you want to take my work and need it somewhere, or do other things with it, ask me first for the permission. Otherwise you are not allowed to take it! Thank you !
Features of this Kernel:
- Build with latest Toolchain 5.3
- Build with CPK2 kernel source!
- Latest Linux version 3.4.113, is always up to date
- Performance and Batterylife improved
- Choose between different CPU governors: performance, powersave, userspace, ondemand, interactiv (default), conservative
- Built with latest ramdisk sources from samsung (CPK2)
- I/O schedulers: CFQ (Default), No-op, Deadline
- Critical TCP bug fixed
- Allow ADB-Insecure
- TCP (Network) control: Bic (default), Reno, cubic, Westwood, Highspeed, Hybla, HTCP, Vegas, Veno, Scalable, LP, Yeah and Illinois
- SeLinux is set to permissive
- UKSM build in
- Init.d support
- Wakelock fixed (google problem)
- All samsung related configs disabled (as knox, tima, restrict rooting)
Download:
V3.2 on AndroidFilehost
All releases on AndroidFilehost
Bugs/Problems:
- None
Instructions:
1. Download kernel
2. Boot into recovery mode
3. Flash kernel
4. Flash any other file which affects ramdisk (such as supersu, xposed, magisk etc.)
5. Reboot
If you wanna join the beta tester group, download yourself telegram and click on the chat link: Telegram Group
Support:
If you like my work, feel free to hit thanks and/or give me a small donation by clicking the link right below. Thank you very much in any way! :good:
PayPal
Credits/Thanks:
- Samsung for sources
- the great linus for his amazing kernel source
- dorimanx
- AndreiLux
- halaskz
- neobuddy83
XDA:DevDB Information
IronStock for chagallxx, Kernel for the Samsung Galaxy Tab S
Contributors
Tkkg1994
Source Code: https://github.com/Tkkg1994/IronKernel/
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V3.2
Stable Release Date: 2017-01-03
Created 2017-01-03
Last Updated 2017-07-14
Reserved
Reserved
Is this kernel integrated in your rom 3.2?
onairda said:
Is this kernel integrated in your rom 3.2?
Click to expand...
Click to collapse
Yes, is integrated.
Testing
Thanks for the kernel!! I'm testing it now and it feels good so far
m.
report
After rebooting the device the subscription to the Wi-Fi network get lost, means I have to reenter the password after every reboot. I don't know if it's the kernel like it is or because I changed the TCP congestion fromm cubic to highspeed. I don't have any experience with this feature. I could change back to cubic and check if the network subscription sticks... .
m.
meduza2 said:
After rebooting the device the subscription to the Wi-Fi network get lost, means I have to reenter the password after every reboot. I don't know if it's the kernel like it is or because I changed the TCP congestion fromm cubic to highspeed. I don't have any experience with this feature. I could change back to cubic and check if the network subscription sticks... .
m.
Click to expand...
Click to collapse
Change in your build.prop secure storage from true to false and it will work again
Sent from my SuperMan powered SM-G930F
Indeed, changed it this way: “ ro.securestorage.support=false “ and it sticks Thanks a lot!!
m.
freaksamael said:
Yes, is integrated.
Click to expand...
Click to collapse
Thanks for the answer
@Tkkg1994 ,
the tab with your kernel is running much smoother then with pure stock - thanks once more!
m.
Anyway to flash back to Stock Kernel?
XDA00000 said:
Anyway to flash back to Stock Kernel?
Click to expand...
Click to collapse
Would a boot.img backup in this case suffice? I haven't flashed the kernel yet but a boot image backup would contain the old kernel as well. The question is mostly if there are any other modifications that are being done.
XDA00000 said:
Anyway to flash back to Stock Kernel?
Click to expand...
Click to collapse
If you don't have the zip file, I would say, you could restore the boot and system partition from your backup, this should bring back the backuped kernel.
m.
Does your kernel support f2fs ?
Claros22 said:
Does your kernel support f2fs ?
Click to expand...
Click to collapse
.... would be nice but I didn't see it in OP ...
m.
Claros22 said:
Does your kernel support f2fs ?
Click to expand...
Click to collapse
I haven't written it to OP but it should at least /data and /cache (untested)
XDA00000 said:
Anyway to flash back to Stock Kernel?
Click to expand...
Click to collapse
Yeah just restore back boot.img backup, nothing else needed
Tkkg1994 said:
I haven't written it to OP but it should at least /data and /cache (untested)
Click to expand...
Click to collapse
Ok nice I will try it then. By the way it is better to use ext4 for other partitions than /data and /cache.
Claros22 said:
Ok nice I will try it then. By the way it is better to use ext4 for other partitions than /data and /cache.
Click to expand...
Click to collapse
All other partitions are simply not supported
Kernel works great so far. No issues and performance feels good.
What's the best way to switch between SELinux permissive and enforcing on this kernel should one want to experiment with that? Some solutions don't seem to like KNOX but it should be disabled on the kernel, too, right? I'm still struggling to get Magisk Hide working so I'm feeling experimentative.
ElementalX Kernel
for OnePlus 6T
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ElementalX is designed for maximum stability.
It is made for people who depend on their phone every day.
Features
Wake Gestures support (sweep2wake & doubletap2wake)
Sweep2sleep
Sound control (speaker, earpiece and mic)
Backlight min setting
Adjust or disable vibration
Advanced Color Control and K-Lapse
Option to disable gesture vibration
Block wakelocks
FIOPS, CFQ, deadline, noop, maple and SIO i/o schedulers
NTFS r/w, CIFS and NFS support
WireGuard support
Option to disable fsync
Performance and power optimizations
Pass SafetyNet (with Magisk)
Installation
1. Flash in TWRP recovery or flash directly in EX Kernel Manager
Notes
Stay up to date with EX Kernel Manager. The latest security updates are always available through the app, usually within hours of the latest OTA. EXKM can be used to configure settings, backup and flash zips and img files, run scripts and install kernel updates quickly and easily. EXKM is compatible with all devices and kernels and is the best and most complete kernel manager available.
You can also use High Brightness Mode so you can see your phone in the sun. This app unlocks the hidden hardware setting that makes your screen much brighter than stock. HBM requires root.
Downloads
OxygenOS/Stock-based ROMs(Android 10)
ElementalX-OP6-4.00
OxygenOS/Stock-based ROMs(Android 9)
ElementalX-OP6-3.18
Source code
Github
XDA:DevDB Information
ElementalX-OP6T, Kernel for the OnePlus 6T
Contributors
flar2
Source Code: https://github.com/flar2/OnePlus6
Kernel Special Features:
Version Information
Status: Stable
Created 2018-11-01
Last Updated 2020-05-01
Reserved
Reserved
We dont have a working custom recovery yet.
domnic79 said:
We dont have a working custom recovery yet.
Click to expand...
Click to collapse
You can use the last bluspark from OnePlus 6, BTW I installed this kernel, it all works, except when I enter audio settings the phone crashes and hard reboots, there might be something conflicting
I am a happy camper.
I was hoping for ElementalX. I have has ElementalX on my Nexus 6P then my Essential PH-1.
Thi is the best kernel and I'll have it on the 6T.
Downloading now so when it arrives I have all I need.
YES!!!
WOO! ElementalX! So @flar2 I'm coming from a Nexus 6 (shamu). Do OnePlus phones have forced encryption like the shamu did? If so, is it a simple flag set in the kernel? Thanks!
domnic79 said:
We dont have a working custom recovery yet.
Click to expand...
Click to collapse
Here is a workaround if you like to flash the kernel.
Lorenzo2010 said:
You can use the last bluspark from OnePlus 6, BTW I installed this kernel, it all works, except when I enter audio settings the phone crashes and hard reboots, there might be something conflicting
Click to expand...
Click to collapse
I think the 6T doesn't have a headphone jack, so that's probably it. I will be getting a 6T soon, and will fix that up.
H4X0R46 said:
WOO! ElementalX! So @flar2 I'm coming from a Nexus 6 (shamu). Do OnePlus phones have forced encryption like the shamu did? If so, is it a simple flag set in the kernel? Thanks!
Click to expand...
Click to collapse
Everything is encrypted now, best to leave it.
Its working on my 6T. I am looking to save as much as battery as possible. Can you help me with some settings I can configure with your Kernel for my device ?
flar2 said:
Everything is encrypted now, best to leave it.
Click to expand...
Click to collapse
Will do! Is it the same idea as the shamu was where it was a flag or is that not known quite yet? Thanks man! I'll give your kernel a try when my 6t gets here, should be here soon!
ProudRed said:
Its working on my 6T. I am looking to save as much as battery as possible. Can you help me with some settings I can configure with your Kernel for my device ?
Click to expand...
Click to collapse
Use default settings.
You may block some wakelocks.
I wouldnt recommend it but, you may underclock cpu frequencies to get more juice at cost of performance
saiprasadgawde said:
Use default settings.
You may block some wakelocks.
I wouldnt recommend it but, you may underclock cpu frequencies to get more juice at cost of performance
Click to expand...
Click to collapse
Upto how much is it recommended ?
And I didnt get any option to block wakelocks in kernel auditor
ProudRed said:
Upto how much is it recommended ?
And I didnt get any option to block wakelocks in kernel auditor
Click to expand...
Click to collapse
U need to use ex kernel manager to be able to block wakelocks
Edit - No wakelock blocking option I see in latest kernel version 3.02.
Re-edit - wakelocks can be blocked again dont know why they disappeared.
6t either reboot or shutdown when the sound option in EX Kernel Manager is selected. Besides that everything seems ok.
Hi guy, can you test something ?
Is the fingerprint sensor work if yo change colors settings (KCAL) in kernel app ?
Thanks
Poloasis said:
6t either reboot or shutdown when the sound option in EX Kernel Manager is selected. Besides that everything seems ok.
Click to expand...
Click to collapse
+1
dago said:
Hi guy, can you test something ?
Is the fingerprint sensor work if yo change colors settings (KCAL) in kernel app ?
Thanks
Click to expand...
Click to collapse
It works fine.
Not works fingerprint later install your kernel
Enviado desde mi ONEPLUS A6013 mediante Tapatalk
ElementalX Kernel
for OnePlus 8 Pro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ElementalX is designed for maximum stability. It is made for people who depend on their phone every day.
Features:
-Optimized for performance and battery life
-Advanced color control (RGB, hue, saturation, contrast, value, K-Lapse)
-Adjust vibration
-Wake gestures (S2W & DT2W)
-Sweep2sleep
-Block wakelocks
-CFQ, noop, BFQ, deadline, FIOPS, SIO, maple and zen i/o schedulers
-Adrenoboost option
-Option to disable fsync
-Option to disable touchboost
-WireGuard support
Installation
1. Flash directly in EX Kernel Manager (root is required to flash in the app)
Notes
Stay up to date with EX Kernel Manager. The latest updates are always available through the app. EXKM can be used to configure settings, backup and flash zips and img files, run scripts and install kernel updates quickly and easily. EXKM is compatible with all devices and kernels and is the best supported and most complete kernel manager available.
Thanks to @tbalden for getting this running on the 8 Pro
Downloads
Android 10
ElementalX-OP8-1.08
Source code:
https://github.com/flar2/OnePlus8
.
XDA:DevDB Information
ElementalX OnePlus 8, Kernel for the OnePlus 8 Pro
Contributors
flar2
Source Code: https://github.com/flar2/OnePlus8
Kernel Special Features:
Version Information
Status: Beta
Created 2020-05-11
Last Updated 2020-08-03
Thanks. Been waiting for this! Appreciate it!
I just finished flashing! Thanks for the awesome work @flar2!
Sent from my IN2025 using Tapatalk
Good to see you here. Nice
@ flar2 you have been my go to kernel always..I just wanna wait a bit longer atm cause i use linux and if somerhing goes wrong its a pain in the butt to restore. Keep up the good work!
pyry666 said:
@ flar2 you have been my go to kernel always..I just wanna wait a bit longer atm cause i use linux and if somerhing goes wrong its a pain in the butt to restore. Keep up the good work!
Click to expand...
Click to collapse
It should be easier to use adb and fastboot on linux. I do all my kernel development and flashing from a terminal in Linux
flar2 said:
It should be easier to use adb and fastboot on linux. I do all my kernel development and flashing from a terminal in Linux
Click to expand...
Click to collapse
Adb and fastboot works just fine. But i am no expert to use that stuff. I have no I issues to say that some people like you are better than me at that those things
Thank you, all is working fine! Great!
Thanks!! Flashed now. Can you please explain, what means touch boost? Is it supposed to help with typing on display etc. ? Cause calibration of display is horrible on OP8 Pro. My OP7 Pro was MUCH better.
OPOmaniac said:
Thanks!! Flashed now. Can you please explain, what means touch boost? Is it supposed to help with typing on display etc. ? Cause calibration of display is horrible on OP8 Pro. My OP7 Pro was MUCH better.
Click to expand...
Click to collapse
Touch boost is a short boost to the CPU's clock speed when the device detects a touch. Nothing to do with display calibration, but it might help. By default, touch boost is enabled, if I'm not mistaken.
I tried to use the built in colour calibration tool to help with the slight green tint what I have at lower brightness levels, but it just makes everything more red and blue and that's not better either.
I'm not sure what is K-lapse supposed to do though.
i always disable touch boost
Thank you for this ?
Will I maintain root after flashing the kernel?
Sent from my OnePlus 8 Pro using XDA Labs
Gordietm said:
Will I maintain root after flashing the kernel?
Click to expand...
Click to collapse
Yes
Gordietm said:
Will I maintain root after flashing the kernel?
Sent from my OnePlus 8 Pro using XDA Labs
Click to expand...
Click to collapse
The AnyKernel3 installer automatically keeps root.
flar2 said:
The AnyKernel3 installer automatically keeps root.
Click to expand...
Click to collapse
One last question ?.
I'm using a custom kernel now on OOS 10.5.6. can I flash your kernel over it, or should I go back to the stock kernel first?
Gordietm said:
One last question ?.
I'm using a custom kernel now on OOS 10.5.6. can I flash your kernel over it, or should I go back to the stock kernel first?
Click to expand...
Click to collapse
Flash the stock boot.img first, as the other custom kernel might have changed the ramdisk
rwilco12 said:
I just finished flashing! Thanks for the awesome work @flar2!
Click to expand...
Click to collapse
Hi there how you flashed it? Via adb?
deves000 said:
Hi there how you flashed it? Via adb?
Click to expand...
Click to collapse
easiest way is using Elemental X Kernel app
Nekromantik said:
easiest way is using Elemental X Kernel app
Click to expand...
Click to collapse
Is it compatible with 10.5.6? Thank you in advance
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SM-T875|SM-T970Based on T875XXU1ATK4
Android 10
Linaro 4.9.4 Toolchain
Clang 9.0.3
Linux 4.19.81
Code:
Feature map:
Enhanced overall performance by tuning flags and configs
Removed watchdogs & debugging
Increased throttling point
Lots of samsung security removed
Reduced shed delay and input latency
Adjusted throughput
Memory tweaks
Priority boosted demanding tasks
Added fiops & sio schedulers
Option to set wq_power_saving
SELinux switchable
Fsync optimized + on/off toggle
CRC disabled + toggle
Enabled more efficient TCP
Cryptoptimizations
Improved kgsl values
Custom wakelock blocker
More and more small modifications
(2rev)
SM-T970 version added
Updated clang optimizations
Netfilter fixes
Experimental NTFS read/write support
TTL Target support
WireGuard integration
GPU OC attempt failed
Installation:
Flash .tar via Odin or unpack and use other ways for boot.img
Do not forget about kernel backup!
P.S. looking for testers to provide support for other Tab versions.
Credits:
Samsung for kernel source
Ian Macdonald so much help and useful commits
Francisco Franco for wakelock blocker
Aaron Segaert the best kernel and inspiration
Source:
Git
Download:
Github
AFH T875
AFH T970
I can test on SM-T970 if needed
efebe said:
I can test on SM-T970 if needed
Click to expand...
Click to collapse
I will PM u.
I want to know if it can be used on sm-t970.
0yuji0 said:
I want to know if it can be used on sm-t970.
Click to expand...
Click to collapse
SM-T970 version will be provided with the next 2rev update.
Vntnox said:
SM-T970 version will be provided with the next 2rev update.
Click to expand...
Click to collapse
thanks
What about the SM-T870?
packydavis said:
What about the SM-T870?
Click to expand...
Click to collapse
I will build for this version someday.
U can try T875 boot on ur risk at the moment.
In plan to do for sm t976 ?
sneakyalec said:
In plan to do for sm t976 ?
Click to expand...
Click to collapse
Ofc it is just a question of time.
Vntnox said:
Ofc it is just a question of time.
Click to expand...
Click to collapse
i can help u if u want, and is it a problem to have android 11?
sneakyalec said:
i can help u if u want, and is it a problem to have android 11?
Click to expand...
Click to collapse
Thanx, I prefer Android Q personally.
I never built for A11 and will not have the opportunity to test it manually.
So thats unlikely to happen very soon.
Now all we need is an aosp rom
bs3pro said:
Now all we need is an aosp rom
Click to expand...
Click to collapse
And AOSP kernel, actually
unlocked 144hz on samsung dex on my phone with kernel, and i would love that on my tab s7 plus, t976b. is it checked on your kernel? is it possible to do that?
i can help u with testing
sneakyalec said:
unlocked 144hz on samsung dex on my phone with kernel, and i would love that on my tab s7 plus, t976b. is it checked on your kernel? is it possible to do that?
i can help u with testing
Click to expand...
Click to collapse
I am not a fan of display overclocking cuz it will lead to decreased apps stability and changed colors.
Furthermore, tried overclocking gpu (the only thing that worth to oc on our Tab) but it wont boot for some unknown reason.
Even if u change/add freq just a bit higher.
Maybe it will be clear sometime.
I can help u with that, it's just one file to change in kernel. Samsung dex 144hz works with usb type c monitor certified by samsung and adapters from samsung, but their adapters are not what i need to work.
Just need to delete the other cases in switch and keep the case of Samsung Adapters to return from function.
It's not about OC GPU
No Android 11 support? May I ask why you prefer Android 10? Thanks and awesome work!
xomikron said:
No Android 11 support? May I ask why you prefer Android 10? Thanks and awesome work!
Click to expand...
Click to collapse
I do not enjoy change above all.
Interested in some great projects as Exagear, Linux Deploy, old DOS and console emulators.
Large amount of them are discontinued and pretty obsolete.
Besides fancy design changes A11 brings many disgusting limitations that just unacceptable for me.
They broke a lot of old applications & modules which I really do not want to lose.
However I will update as soon as there will be alternatives or extended support.
Can I use this on T970 which already came with Android 11 in the first place? Do I have to downgrade to use this?