Good evening everyone! I have a G5S Plus Xt 1802 Conrado recently. I was on the PIXEL ROM. And I decided to install Nougat using the following tutorial https://forum.xda-developers.com/mo...t1802-return-stock-firmware-moto-g5s-t3747342 using the automatic block.bat.
But to find myself in, I find myself with a sad surprise. I was left without my IMEI and without the call sensor, and a screen cycle. And the bike screen. And for what is a strange sensor sensor works the same as call.
I've already used modemst1 erase and erase modemst2 I've already installed all the custom ROMs available for the handset but nothing worked. I've done everything. Please help me help me I am very grateful .
Original Topic https://plus.google.com/108614197159112103773
Related
Hi !
Since 5.1 update, I noticed that I regularly have some lock lost with the Gps. As I use the Moto X to contribute to OpenStreetMap, I record gpx trace and use them to geolocalize pictures, and I see some "hole" in the record.
And I see some lockup when I use OsmAnd for car routing.
I never encounter this before the Lolippop update.
Anyone see this bug too ?
yes i have same issue , this only on lollipop.
Android 5.1 Lollipop
on Garmin StreetPilot it can't locate position.
In a way, I'm happy to see that I'm not alone.
Time to put some pressure on https://forums.motorola.com/hives/a440c30711/summary ?
I've started a thread :
https://forums.motorola.com/posts/22b8640432
Try these two commands and see if it help:
fastboot erase modemst1
fastboot erase modemst2
Thanks eksasol, i will try.
But I think the answer is here, it's a global problem on Lollipop.
On my Moto X, airplane mode seems to reduce the problem but i need more tests.
Hi,
i flashed my Pro and unfortunately wiped the persist partition. After booting everything worked fine except the proximity sensor. I searched the internet and found a solution to flash the persist_1.img. After flashing the persist_1.img the Pro crashed again and again with the blue LED on. The only way to use it was wiping the persist partition and reinstalling, but now i have no proximity sensor.
Is there any solution to get my proximity sensor back?
Thanks!
Edit: Unfortunately i am not allowed to post links...
Solved. I flashed 1.9 with qfil and after that installed aicp.
Thats the short Version, it took me 5 hours at least...
Hi, as many of us have lost of IMEIs and VOLTE after downgrading from custom Oreo ROM, is there any developer who can assist us with this? I will perhaps recite all the happenings which occurred with me, first I flashed the Oreo based AOSP since some YouTuber stated it has no bugs whatsoever in it, it worked fine like no bugs or anything of that sort, thereafter I planned on flashing the stock ROM, back then I getting my signals since I already read to skip using commands 'fastboot erase modemst1' and 'fastboot erase modemst2', but then I wasn't getting VOLTE on the stock rom as well, I thought taking OTAs would fix it, but unfortunately it didn't, then I found a post which promised on getting back my VOLTE if I flash persist file, as they said I followed each and every step, but since flashing that thing I haven't been able to get my signal back, 0 IMEI and no damn response even after switching SIM cards, I even sideloaded the Oreo soak update seeking my IMEI and signals, but nope that didn't work either, I have tried all the custom roms like Pixel Experience, RR, Validus and AOSP but neither of them is helping, is there any kind and supportive developer who can perhaps look into the matter and help us? This is the only phone I have and I really love Moto, also before you kind seniors point fingers at me, I would already like to confess that I knew all the risks of flashing, upgrading and downgrading and I have been flashing custom roms since the original Moto G(2014), none of the issues have been so unkind and bad, like there's no solution out here for us and no assistance whatsoever from Motorola/Lenovo, hence if possible I would really appreciate if anyone could help us getting our device back, Thanking You all
Same issue
I have exactly the same issue...after flashing that g4 persist backup to get the volte working...there is no network at all....tried all the methods
Any one please help..
Thank you.
Same as here
Hello,
I have a motorola G6 that after bad root get stuck on bootloop.
I flash the phone with two roms but the phone after flash dont have sound during calls, the earpice dont work even in loudspeaker, but the phone rings when is receving calls.
anyone already have this problem?
tanks
This question is probably in the wrong section but anyway...I did. I never checked the phone prior to rooting so I'm not sure if a "bad root" was the cause or not. However, I experienced the exact same problem as you. I was originally on build OPS27.82-19-4 so I reflashed stock OPS27.82-19-4 as described here. But I still had the same problem. On a whim I randomly flashed build OPS27.82-19-4 following the same instructions. The phone has been working great ever since (I have it rooted, xposed. etc...). Not sure why there was a problem, or if reflashing the newer build "fixed" it or not...but as I said, all is good now. FWIW, when I check the sim status in settings>about phone, the network section is blank. It was blank when I had problems too.
Perhaps this will help you..
PS When I reflashed the firmware, the phone would boot into fastboot mode, then when I selected "Start" it would boot to the OS. If you run into that, here is how it was fixed. See posts 5, 6, 7, & 8.
Good luck!
I had a similar problem, I did the root, TWRP, I ended up giving up and flash again on the stock of the bike G6 Play (Brazil) available here in XDA, to my surprise, he made and received calls normally, the speaker for music and connections of other applications (Whatsapp, Messenger, Hangouts, etc.), but it did not work for the rom dialer.
I thought I had a problem, it was when a system update appeared, I installed it and it worked again.
I figured it was some rom bug I installed.
Tanks for the help.
I solved the problem flashing the phone with flashrom.bat instead of put the comand one by one.
Many tanks
Multiredes said:
Tanks for the help.
I solved the problem flashing the phone with flashrom.bat instead of put the comand one by one.
Many tanks
Click to expand...
Click to collapse
That's because a custom rom or GSI does not have all the necessary files. 99.9% of the time, flashing stock will fix a problem.
Hello guys! After experiencing all custom ROMS including Xiaomi.EU, figured out that every single one has some small inconvenience for me and planning to return to stock, eventually using only Magisk and potentially a custom Kernel.
Managed to install every single version of Global Developer ROM, everything works well except the FaceUnlock that was gone, (the phone remained stucked in China region) and I am not able to access the fingerprint section, after few tries it brings me an error message.
Tried also using MIFlash , but the Fastboot ROM writting took 3 sec to write and stopped as successfully, then nothing but bootlooping.
Currently is the phone is functional, but as mentioned before not able to setup new fingerprints (using cache and data from old recovery and those work) neither Face Unlock.
Tried to Google any kind of solution, but unfortunately nothing worked.
Any suggestion is appreciated.
I see that nobody is interested to support, so I continuously researched and figured out that doing a full wipe and following these steps from this post will solve my problem:
https://forum.xda-developers.com/mi-8/help/chinese-mi8-to-global-instructions-t3839665
From I don't know which reason I was blocked on China region without the possibility to changing it.