Mokee ROM thread (UNOFFICIAL) - discussion and peer support. - Samsung Galaxy S 5 Unified Development

Hi all.
I am not the developer of this ROM. I have created this thread as there seems to be no real place for non-chinese speakers to discuss this ROM and help each other with any problems.
Mokee is currently at Oreo for the S5 and is under active development, receiving nightly builds.
Here is the link to the official downloads page:
https://download.mokeedev.com/?device=klte

One of the reasons I created this thread was to ask fellow users a couple of questions...
Does anyone know if Mokee 8.1 supports fast charge? It seems to take a while to charge, but I'm not sure if that's just my cable or other factors?
Does anyone else experience graphical performance issues? Playing YouTube videos is often stuttery, and I've noticed many games are laggy with lots of low fps. Performance in the ROM is generally very good, so I'm not sure if it's an issue with the gpu drivers or something...?
Cheers

tooplanx said:
One of the reasons I created this thread was to ask fellow users a couple of questions...
Does anyone know if Mokee 8.1 supports fast charge? It seems to take a while to charge, but I'm not sure if that's just my cable or other factors?
Does anyone else experience graphical performance issues? Playing YouTube videos is often stuttery, and I've noticed many games are laggy with lots of low fps. Performance in the ROM is generally very good, so I'm not sure if it's an issue with the gpu drivers or something...?
Cheers
Click to expand...
Click to collapse
I used the Magisk fast charge module which worked well.
I would recommend flashing a custom kernel.

Drhedphuk said:
I used the Magisk fast charge module which worked well.
I would recommend flashing a custom kernel.
Click to expand...
Click to collapse
So fast charge isn't supported as standard in Mokee?
Will a custom kernel enable it, or will that just help with graphics performance? Any recommendations?
Cheers

tooplanx said:
So fast charge isn't supported as standard in Mokee?
Will a custom kernel enable it, or will that just help with graphics performance? Any recommendations?
Cheers
Click to expand...
Click to collapse
It should improve overall performance
Here are a few kernels to get you started.
SMARTPACK KERNEL:
https://forum.xda-developers.com/galaxy-s5/unified-development/kernel-project-kltexxx-t3564206
BOEFFLA KERNEL (UNOFFICIAL)
https://forum.xda-developers.com/ga...ffla-kernel-unofficial-lineage-os-15-t3764497
OreKazu Kernel:
https://forum.xda-developers.com/galaxy-s5/orig-development/kernel-orekazu-kernel-project-t3741374
TUNED KERNEL:
https://forum.xda-developers.com/ga...unofficial-boeffla-kernel-lmkmod-low-t3685662
I recommend using Smartpack kernel manager to tune Smartpack kernel & OreKazu kernel (link on Smartpack Op)
Use BOEFFLA configuration app for BOEFFLA (unofficial)
You can also use it for tuned kernel but it is called tuned kernel for the very reason that it comes pre tuned, just flash it and leave it to do it's thaaaang! ?
Al of the above kernels work with 15.1 Oreo. They are all excellent Kernels, but if you do not know much about tweaking kernel settings, I would recommend that you start with Tuned.
The Magisk fast charge module will work with Tuned. There is a fast charge setting in the Smartpack kernel manager for Smartpack kernel.
I hope I have covered everything.

Drhedphuk said:
It should improve overall performance
Here are a few kernels to get you started.
SMARTPACK KERNEL:
https://forum.xda-developers.com/galaxy-s5/unified-development/kernel-project-kltexxx-t3564206
BOEFFLA KERNEL (UNOFFICIAL)
https://forum.xda-developers.com/ga...ffla-kernel-unofficial-lineage-os-15-t3764497
OreKazu Kernel:
https://forum.xda-developers.com/galaxy-s5/orig-development/kernel-orekazu-kernel-project-t3741374
TUNED KERNEL:
https://forum.xda-developers.com/ga...unofficial-boeffla-kernel-lmkmod-low-t3685662
I recommend using Smartpack kernel manager to tune Smartpack kernel & OreKazu kernel (link on Smartpack Op)
Use BOEFFLA configuration app for BOEFFLA (unofficial)
You can also use it for tuned kernel but it is called tuned kernel for the very reason that it comes pre tuned, just flash it and leave it to do it's thaaaang!
Al of the above kernels work with 15.1 Oreo. They are all excellent Kernels, but if you do not know much about tweaking kernel settings, I would recommend that you start with Tuned.
The Magisk fast charge module will work with Tuned. There is a fast charge setting in the Smartpack kernel manager for Smartpack kernel.
I hope I have covered everything.
Click to expand...
Click to collapse
Thanks loads, I've heard lots of good things about Smartpack so might go for that. I'll have a look at some guides about tuning it.
If I can't figure it out I'll try the tuned kernel.

The page launches a daily update and I think no one has time to download and update it daily so how often is it advisable to update the rom?

Ranniel said:
The page launches a daily update and I think no one has time to download and update it daily so how often is it advisable to update the rom?
Click to expand...
Click to collapse
I do it on a weekly basis.

Drhedphuk said:
I do it on a weekly basis.
Click to expand...
Click to collapse
Do you just do a dirty flash (wipe dalvik and cache?)

tooplanx said:
Do you just do a dirty flash (wipe dalvik and cache?)
Click to expand...
Click to collapse
No, I always clean flash, including Format data.

I'm noticing more and more bugs:
- Web pages don't always respond to touch properly.
- Website videos don't go fullscreen properly.
- IR blaster doesn't seem to work (Anymote app says phone doesn't have one).
Anyone else have these issues? Are they fixed in recent nightly builds? Any fixes or work arounds?
Cheers

tooplanx said:
I'm noticing more and more bugs:
- Web pages don't always respond to touch properly.
- Website videos don't go fullscreen properly.
- IR blaster doesn't seem to work (Anymote app says phone doesn't have one).
Anyone else have these issues? Are they fixed on recent nightly builds? Any fixes or work arounds?
Cheers
Click to expand...
Click to collapse
Are you on a nightly build or a release build?

Drhedphuk said:
Are you on a nightly build or a release build?
Click to expand...
Click to collapse
I'm currently on a nightly from 2018-10-29.
I know you said that you do a clean install every time, but if I did a dirty flash of a new nightly that should be alright, yeah?
Reeaaally don't want to reset my phone again, I've done it lists recently and it's a PITA.
If I have to reset I'd probably just go for something solid like Lineage 14.1

tooplanx said:
I'm currently on a nightly from 2018-10-29.
I know you said that you do a clean install every time, but if I did a dirty flash of a new nightly that should be alright, yeah?
Reeaaally don't want to reset my phone again, I've done it lists recently and it's a PITA.
If I have to reset I'd probably just go for something solid like Lineage 14.1
Click to expand...
Click to collapse
The problem with dirty flashing is you can bring over bugs from the previous build.

I found that downloading nightlies through the Mokee centre app would allow the ROM to update automatically through a script than runs in the recovery. It didn't appear to wipe *anything* though.
Everything seemed to upgrade smoothly.
I still have the same bugs though. The nightlies mostly seem to be translations and minor bug fixes for other devices.

Related

Mourta Kernel, the continuation of IODAK's excellent work.

Featuring a new cpufreq interface, AbyssplugV2, intelliplug and a whole host of new additions that are not available in any other kernel for the x3.
Among them are updates only found in this kernel, saner defaults via config, better optimizations for the actual code and a rewritten version of devfreq.
It also have an updated baseband configuration and built in rather than to keep a module as it makes no sense to have a vital function as a module.
https://bitbucket.org/mourta/liquid_kernel_lge_p880-stable/
Kernel: http://www.mediafire.com/download/viy5a3dtaccd0gm/mourta-stable-08-23.zip
If there is a request for it i also have a ROM available based on grouper blobs, AD optimizations and a build around this kernel with a new dev tree.
For kernel install, it's anykernel, you can install it on any custom ROM, for stock and the lastest updates you will have to head over to Modaco and my original thread.
Note that this is a one time release, if you like it you'll have to head over to modaco to get updates.
it should be noted that the recommended settings is using intelliplug (you may need to use kernel tweaker or trickster mod for that if you're not running my ROM, and abyssplugv2, i also recommend ROW for a sheduler and Westwood for your congestion handling.
Note that you can now overclock to any frequency and it will feed the GPU chip with the needed volatage, this is great for cooking a roast beef but not for any practical use.
Quadrant scores are 8k and the last Antutu was at 16487, no overclocking but you won't reach that without using my ROM.
And with that... i'm done.
Thanks to the IODAK, Fransico, Adam77Root, Faux123 and others that provided code and/or input.
Oh, what I see here? The awesome kernel I'm testing with @ottomanhero and lucaarx and the great dev and friend @IcanhasLG coming back on xda? Let's rock hard&heavy, right now!
peppethustra said:
Oh, what I see here? The awesome kernel I'm testing with @ottomanhero and lucaarx and the great dev and friend @IcanhasLG coming back on xda? Let's rock hard&heavy, right now!
Click to expand...
Click to collapse
We'll see how this goes.
Thankfully i am in touch with a mod that will keep this drama free,
And for anyone wondering, peppethustra is head of my testing crew, you get stable releases because of them.
It should be noted that i'm still going to prefer the forum that greeted me over the one that shunned me from the get go, updates here will be sporadic at best but on time on the other forum.
It's great to see your work on XDA.Now everyone can experience your awesome work
P.S. you can find neccessary links in my signature
Great work, running your kernel now.
But Iodak was not updated since long ago and its sources does not contain many great fixes from cm11 kernel.
Thats why Demetris relased Cyodak kernel in Android development section. It's Iodak brought up to date with latest cm 11 kernel .
It would great to see Muorta Kernel based on Cyodak instead of old Iodak. We would have your exclusive features with up to date cm11 kernel upgrades. But maybe you already upgraded iodak's source, let us know
FunkyRasta said:
Great work, running your kernel now.
But Iodak was not updated since long ago and its sources does not contain many great fixes from cm11 kernel.
Thats why Demetris relased Cyodak kernel in Android development section. It's Iodak brought up to date with latest cm 11 kernel .
It would great to see Muorta Kernel based on Cyodak instead of old Iodak. We would have your exclusive features with up to date cm11 kernel upgrades. But maybe you already upgraded iodak's source, let us know
Click to expand...
Click to collapse
Obviously, the real necessary updated patches have been implemented yet ("continuation" means this, too), so it's not necessary nor in Mourta's plans to base it on cyodak (which really isn't the only way to find updated code for our device)
peppethustra said:
Obviously, the real necessary updated patches have been implemented yet ("continuation" means this, too), so it's not necessary nor in Mourta's plans to base it on cyodak (which really isn't the only way to find updated code for our device)
Click to expand...
Click to collapse
That's what I wanted to know, as OP didn't explicitly stated it. Thanks
FunkyRasta said:
That's what I wanted to know, as OP didn't explicitly stated it. Thanks
Click to expand...
Click to collapse
Outdated sources never are a good base for developing a fresh new kernel or ROM, if there is a new compatible code implementation ready to be merged into the code That's the first thing a good developer checks (and if you can, look at Mourta's bitbucket linked in the OP to view his commits, there will be all the principal news about new code implementations)
Tried this but I loose my modem every now and then and the screen won't wake sometimes.
baxtex said:
Tried this but I loose my modem every now and then and the screen won't wake sometimes.
Click to expand...
Click to collapse
Go to Modaco and find newer version (26/8/2014) . It will resolve problems like yours
Okay will do.
How's the deep sleep ?
Written from my Optimus 4X powered by Omni 4.4
LGaljo said:
Go to Modaco and find newer version (26/8/2014) . It will resolve problems like yours
Click to expand...
Click to collapse
this version, according to trickster mod, does not use deep sleep state and still screen won't wake up sometimes. so i dropped it for now.
greetings
peter
peter_altherr said:
this version, according to trickster mod, does not use deep sleep state and still screen won't wake up sometimes. so i dropped it for now.
greetings
peter
Click to expand...
Click to collapse
Can you give more info about your ROM, kernel settings, setup etc. and provide a logcat if possible? That's a rare issue you're having there.I've used my phone for 20 hours now, (%3 battery left) and it slept for about 15 hours, same version.
I suggest you to try flashing the kernel twice.I had such problems with iodak kernel back in the time and flashing it twice had fixed the deep sleep issue.
ottomanhero said:
Can you give more info about your ROM, kernel settings, setup etc. and provide a logcat if possible? That's a rare issue you're having there.I've used my phone for 20 hours now, (%3 battery left) and it slept for about 15 hours, same version.
I suggest you to try flashing the kernel twice.I had such problems with iodak kernel back in the time and flashing it twice had fixed the deep sleep issue.
Click to expand...
Click to collapse
+1
@peter_altherr And more important thing: have you at least wiped cache and dalvik before flashing the kernel? If yes, try wiping system partition too (no factory reset, you can leave /data partiton intact) then reflash ROM, gapps and kernel, and see how it goes..wait 3 or 4 minutes before trying to wake up device, after the first boot, and deep sleep would start without problems
I have tried the 26/8 version but that still gives me RIL problems, I get no signal whatsoever. I cannot grab a logcat as I need my phone to work right now but I'm Running latest beanstalk version.
baxtex said:
I have tried the 26/8 version but that still gives me RIL problems, I get no signal whatsoever. I cannot grab a logcat as I need my phone to work right now but I'm Running latest beanstalk version.
Click to expand...
Click to collapse
Wait for next version, great changes will come even about this issue
@peter_altherr you should unplug it from charger and try unplugged.
when charging cpu never reaching deepsleep.
@ whoever had freeze/sod problems with last kernel version: a new fixed release has been uploaded (it's a minor release: reverted GPU OC, which was causing the problem). Check official thread for the download link
my phone does not see SD card with 0902
and yes im 100% sure its kernel problem....recovery sees my sd, and so iodak kernel

RealONE Kernel for CM and based versions

RealONE Kernel for Moto X 2014!
Only CM or based CM versions like RR,NX...
And only Android M too
Features:
Compiled with UBERTC 4.9.4
Optimized Entropy
FauxSound
Power Suspend
Improved accuracy of MultiCore
CRC disabled by default( 30% extra perfomance on I/O)
Swappiness reduced to 15%
UnderClock CPU (268 Mhz)
Activated Power Eficcient Worqueues
#Governors:
ZZmove
Intellidemand
Smartmax Extreme Power Saver (eps)
Intelliactive
#Hotplugins:
MSM_Hotplug
Intelliplug
Alucard
MSM MP Decision
#I/O Schreduler:
Added Zen
All credits goes to Michel Borges
Thanks Leonardo Augusto
Thanks Faux123
Source of the Kernel on github:
https://github.com/RealOne-Kernel/RealOne-Victara-Kernel
could you give instructions on how to flash a kernel in our device?
marquesini said:
could you give instructions on how to flash a kernel in our device?
Click to expand...
Click to collapse
This is not the place for that.
jlink38 said:
This is not the place for that.
Click to expand...
Click to collapse
oh, ok.
then I dunno, pm me an external link for that ? i really want to try change the kernel, but don't want to mess up the device, i could google it but preffer a recommendation of a tutorial by someone who understands more about it than i dunno.
anyway, thanks.
Hello, your kernel is very good, very fluid and good battery consumption in CM13, it would be possible in the future to add support KCAL?, can change the saturation, contrast, etc., thank you for your work.
[DEV][PATCH] KCAL - Advanced color control for Qualcomm MDSS 8x10/8x26/8974/8084/8939
Great kernel. Has improved battery life quite a bit !
Thanks!! Testing on CM13... Looks good
Good battery consumption.
Sent from my XT1095 using Tapatalk
Great kernel so far, thanks for making a custom kernel for 6.0, I've been waiting for one.
Would it be possible for you to add support for DriveDroid to your kernel?
http://forum.xda-developers.com/showthread.php?t=2196707
https://play.google.com/store/apps/details?id=com.softwarebakery.drivedroid&hl=en
Thxx , give me more feedbackk ! And I'll take a look at suggestions at the weekend guys !!
Can't wait to see what this can do..bout to flash now!!!
some people say they are taking random reboots .. anyone had ? maybe a log for me ?
MichelBorgess said:
some people say they are taking random reboots .. anyone had ? maybe a log for me ?
Click to expand...
Click to collapse
Yes i had that issue, but i reflashed cm, I'll retry tomorrow and get you some logs (hopefully i have time, I'm doing my finals now...).
MichelBorgess said:
some people say they are taking random reboots .. anyone had ? maybe a log for me ?
Click to expand...
Click to collapse
I'll try.its happened a few times to me
---------- Post added at 08:47 AM ---------- Previous post was at 08:39 AM ----------
Where can I post my logcat?
http://pastebin.com/ try this
Your kernel its a dream hahahaha I was waiting for a kernel with fauxsound since I've bought this phone. So, first of all, thank you very much for your kernel and we appreciate your work and your time spent with this kernel. But lets get to the facts:
1) In RR 5.6.0 your kernel cause bootloop;
2) In CM13 (specifically 2015-12-12 build) I had a lot of random reboots and the sound (specifically Play Music and Deezer) sometimes was cracking or just not played;
3) In CrDroid I had the same thing in CM13 but the rom has some serious bugs, so we don't count it;
4) In Nexus Experience 10.0.4 I just had ONE random reboot (take note: the first boot, so lets blame the instability of the rom) and, since then, my phone is working completely perfect.
5) With kernel auditor all of my preferences are saved and sticked after a reboot (in Nexus Experience 10.0.4)
Note: All of the Roms was fresh installed, wiped everything (including internal storage) then installed ROM->GAPPS (NX GApps in Nexus Experience and OpenGApps in the other roms)->KERNEL
Maybe with some work in your kernel and in the newer roms, this phone will gain some fresh air!
Thank you again!
Ps.: not an american guy, so please, I'm sorry for any english mistake
victor19 said:
Your kernel its a dream hahahaha I was waiting for a kernel with fauxsound since I've bought this phone. So, first of all, thank you very much for your kernel and we appreciate your work and your time spent with this kernel. But lets get to the facts:
1) In RR 5.6.0 your kernel cause bootloop;
2) In CM13 (specifically 2015-12-12 build) I had a lot of random reboots and the sound (specifically Play Music and Deezer) sometimes was cracking or just not played;
3) In CrDroid I had the same thing in CM13 but the rom has some serious bugs, so we don't count it;
4) In Nexus Experience 10.0.4 I just had ONE random reboot (take note: the first boot, so lets blame the instability of the rom) and, since then, my phone is working completely perfect.
5) With kernel auditor all of my preferences are saved and sticked after a reboot (in Nexus Experience 10.0.4)
Note: All of the Roms was fresh installed, wiped everything (including internal storage) then installed ROM->GAPPS (NX GApps in Nexus Experience and OpenGApps in the other roms)->KERNEL
Maybe with some work in your kernel and in the newer roms, this phone will gain some fresh air!
Thank you again!
fix in next build
Click to expand...
Click to collapse
Yo guyss ! I redid the kernel, and apparently restarts stopped .. is still simpler, more 'll keep updating
zzmoove
intelliplug
IO Zen
https://www.androidfilehost.com/?fid=24340319927533603
I don't understand this thread. The OP has a different username the one above who has released v2? And why hasn't this been moved to 'original development'?
floepie said:
I don't understand this thread. The OP has a different username the one above who has released v2? And why hasn't this been moved to 'original development'?
Click to expand...
Click to collapse
I just asked for Vinicius post for me , since I had not yet allowed to post in section ...

LOST in a sea of roms

Hi there.
I been spending several hours reading user's opinions about several roms for the xsp.
I saw plenty of unofficial roms based on cyanogenmod official roms. And the question that pops into my mind it's.
Why so many mods? People doesn't like the official releases?
Also I been reading that 5.1 roms are laggy, and in a custom rom i'm looking for stability and performance.
Maybe I should go for and official cyanogenmod 11 rom?
Maybe for a stock based rom?
What do you think?
Hello.
Yes, there is a lot of rom for SP. But just a few work as it supposed to.
Lollipop it is in his nightly stage, though is very stable and the most recent apps, you will be able to use.
There is too a recent patch for security, we should take in consideration, Im using myself as a daily driver without problems, nevertheless still have some minor bugs, but nothing that cant make you wish to throw your SP on wall
If you want to test and see how looks like, I would recommend Sabermod Unofficial Or CM 12.1 Official Nightly
cm12.1+ addons imo cuz it's my second full month on it and it never failed me ....no problems for me and great performance
flash- said:
cm12.1+ addons imo cuz it's my second full month on it and it never failed me ....no problems for me and great performance
Click to expand...
Click to collapse
how about battery? i just bricked carbon rom and finding another rom to try
dic1911 said:
how about battery? i just bricked carbon rom and finding another rom to try
Click to expand...
Click to collapse
battery is good too yep
Go for CyanogenMod 12.1 nightlies with addons...Its Best for lollipop based ROMs.
You can try unofficial CM13 also if you can use the phone without camera. Battery life and performance of CM13 is far better than cm 12.1.
To be honest, is a matter of usage and preference. For me it was working fine but my phone got way too hot for my taste, but the deal breaker was that no matter what lolipop ROM I used facebook HD playback was choppy as hell. I know that it sounds silly but that's something that I need. None of these issues exist on stock, of course (C5306 - 1.205)
I think the Sabermod unofficial takes the lead on cm12.1 ... Great battery and butter smooth. I think it' s the for performance and battery !
I use official CM11 slimmed by me, without gapps, disabled LogCat, little modified build.prop + WilliamsPLUS and I'm really happy ; p
which 5.1 rom has fewer lag and more batterylife?
@beodo
A sea of roms but many of them are discontinued or not updated, so first check that one.
As fellow members said CyanogenMod 12.1 Unofficial SaberMod with add ons is the best right now for me as well, very fast, really fluid,stable and good battery life, in is some parts is even better than the latest official stock rom.
I m using this rom for over a month and i love it.
If you need even better battery life you could use Helium kernel (just dirty flash at recovery) and enable conservative governor, if you would like to take it further you can also install xposed framework which unlocks you much more features like power saving better experience, extra customization and more.
All of the above are continuously updated and supported by our great developers too :good:
@iceweek
The above answers you question as well
Thinking about trying this one.
http://forum.xda-developers.com/xpe...-stryflex2013266073-lp-official-sony-t3180637
Is this one stable for daily use?
Also, do I have to download Latest Xperia Apps Installer.zip if I am using latest ultimate zip?
Please reply.
destiny4life said:
Thinking about trying this one.
http://forum.xda-developers.com/xpe...-stryflex2013266073-lp-official-sony-t3180637
Is this one stable for daily use?
Also, do I have to download Latest Xperia Apps Installer.zip if I am using latest ultimate zip?
Please reply.
Click to expand...
Click to collapse
well you can try it but i try it and its not for good in my opinion
it can be used but have couple bugs
now im on candy5 + helium 4.2 kernel and its very good
zaxxpp said:
well you can try it but i try it and its not for good in my opinion
it can be used but have couple bugs
now im on candy5 + helium 4.2 kernel and its very good
Click to expand...
Click to collapse
Please share links for candy5 and helium kernel.
Thanks in advance.
destiny4life said:
Please share links for candy5 and helium kernel.
Thanks in advance.
Click to expand...
Click to collapse
cant post link , find it here on xda , then find helium kernel download both zips
transfer it on you sd card , full wipe ,flash candy5-release.v4.1-20151201-UNOFFICIAL-huashan and when it finish,wipe chache and dalwik, and then flash helium
reboot
zaxxpp said:
cant post link , find it here on xda , then find helium kernel download both zips
transfer it on you sd card , full wipe ,flash candy5-release.v4.1-20151201-UNOFFICIAL-huashan and when it finish,wipe chache and dalwik, and then flash helium
reboot
Click to expand...
Click to collapse
Hey Bro,
Can anyone check my thread and give me some solution to my bricked xperia.
http://forum.xda-developers.com/xperia-sp/help/messed-phone-phone-kernel-logo-20-t3300597
I can't seem to find a proper solution. :crying:
Thank You
zaxxpp said:
well you can try it but i try it and its not for good in my opinion
it can be used but have couple bugs
now im on candy5 + helium 4.2 kernel and its very good
Click to expand...
Click to collapse
That one has very good reviews
giannisv6 said:
@beodo
A sea of roms but many of them are discontinued or not updated, so first check that one.
As fellow members said CyanogenMod 12.1 Unofficial SaberMod with add ons is the best right now for me as well, very fast, really fluid,stable and good battery life, in is some parts is even better than the latest official stock rom.
I m using this rom for over a month and i love it.
If you need even better battery life you could use Helium kernel (just dirty flash at recovery) and enable conservative governor, if you would like to take it further you can also install xposed framework which unlocks you much more features like power saving better experience, extra customization and more.
All of the above are continuously updated and supported by our great developers too :good:
The above answers you question as well
Click to expand...
Click to collapse
Finally I followed your advice and it works like a charm, thank you!

Which resurrection remix is the best?

There are 4 versions (more or less) of Resurrection Remix ROMs (e.g Zenity, Sultan's, EAS-VOX) for the 3T and i don't know which to choose. I'm looking for the most stable, battery friendly and OMS-supported out of all of them. Support for custom kernels would also be nice but if it doesn't support them it's okay. Also, if there are any ROMs that has most of the features i listed, do let me know
Hi, i had same problem. And i did choose that one: https://l.facebook.com/l.php?u=http...sQE_8mxFikIynqJh4-cR9FyJiJ2kS201c6wpHZZNl&s=1
Everything is just fine
asydan said:
There are 4 versions (more or less) of Resurrection Remix ROMs (e.g Zenity, Sultan's, EAS-VOX) for the 3T and i don't know which to choose. I'm looking for the most stable, battery friendly and OMS-supported out of all of them. Support for custom kernels would also be nice but if it doesn't support them it's okay. Also, if there are any ROMs that has most of the features i listed, do let me know
Click to expand...
Click to collapse
I think they are all good but this version -> https://forum.xda-developers.com/on...development/rom-resurrection-remix-m-t3399960
Is the best in my opinion.
1. most frequent updates.(currently even nightlies)
2. comes with ex kernel
3. is the only aosp/laos rom out there that doesnt throttle while playing moderncombat.
I tried all other aosp/laos roms, not only all rr roms. And they all start throttling while playing moderncombat even with the same ex kernel and kernel settings. The game simply starts lagging because the cpu clocks down. And the funny thing is the device doesnt even start heating.
I was almost sure that the official rr is better but i switched back to the custom version and was shocked that it never throttles while playing even when gpu boost is on "high". You can also set the kernel settings using akt app to get better battery life. But for me the battery is good enough.
nadejo said:
I think they are all good but this version -> https://forum.xda-developers.com/on...development/rom-resurrection-remix-m-t3399960
Is the best in my opinion.
1. most frequent updates.(currently even nightlies)
2. comes with ex kernel
3. is the only aosp/laos rom out there that doesnt throttle while playing moderncombat.
I tried all other aosp/laos roms, not only all rr roms. And they all start throttling while playing moderncombat even with the same ex kernel and kernel settings. The game simply starts lagging because the cpu clocks down. And the funny thing is the device doesnt even start heating.
I was almost sure that the official rr is better but i switched back to the custom version and was shocked that it never throttles while playing even when gpu boost is on "high". You can also set the kernel settings using akt app to get better battery life. But for me the battery is good enough.
Click to expand...
Click to collapse
Do i need to apply the AKT tweaks all over again when i restart my device? if not, what profile are you using and how's the screen on time?
nissanoo0 said:
Hi, i had same problem. And i did choose that one: https://l.facebook.com/l.php?u=http...sQE_8mxFikIynqJh4-cR9FyJiJ2kS201c6wpHZZNl&s=1
Everything is just fine
Click to expand...
Click to collapse
what's the difference with all the other versions? I'm sorry if I'm a bit noob-ish
asydan said:
what's the difference with all the other versions? I'm sorry if I'm a bit noob-ish
Click to expand...
Click to collapse
Zenity is with EAS and with a kernel based on Renderkernel.
Sultanized RR is not based on official LOS, rather on sultans LOS 14.1
more infos you can get in their threads (OP). I would choose one of these. Both are stable and with OMS
phoberus said:
Zenity is with EAS and with a kernel based on Renderkernel.
Sultanized RR is not based on official LOS, rather on sultans LOS 14.1
more infos you can get in their threads (OP). I would choose one of these. Both are stable and with OMS
Click to expand...
Click to collapse
So should I choose the EAS version or this https://forum.xda-developers.com/on...development/rom-resurrection-remix-m-t3399960
asydan said:
So should I choose the EAS version or this https://forum.xda-developers.com/on...development/rom-resurrection-remix-m-t3399960
Click to expand...
Click to collapse
That's your decision. I think you are happy with both. Read here for more infos about EAS: https://www.linaro.org/blog/core-dump/energy-aware-scheduling-eas-project/
phoberus said:
That's your decision. I think you are happy with both. Read here for more infos about EAS: https://www.linaro.org/blog/core-dump/energy-aware-scheduling-eas-project/
Click to expand...
Click to collapse
Alright I think I'll try the Zenity's version. Also, can I ask which among this two do you prefer more? Thanks!
asydan said:
Alright I think I'll try the Zenity's version. Also, can I ask which among this two do you prefer more? Thanks!
Click to expand...
Click to collapse
I would flash VertexOX or Zenitys RR
phoberus said:
I would flash VertexOX or Zenitys RR
Click to expand...
Click to collapse
But Vertex has not many features, right?
I have official RR installed, but now I am unsure, if I should use one of the unofficials?!?
Are there many differences?
derAndroidler said:
But Vertex has not many features, right?
I have official RR installed, but now I am unsure, if I should use one of the unofficials?!?
Are there many differences?
Click to expand...
Click to collapse
Yes, Vertex has only a few features but is extremly stable and fast.
The official is good too, almost all roms for our phone are good. It's your choice

[9.0/8.1] Baddar Kernel [GCC 10.0][CAF+Linux Stable][Update : 11/7/2019]

Introduction
Hi everyone, after building the updated los kernel I decided to build a fully custom kernel for our device. So why call it "baddar" ? it was the first name I used for the kernel and its my family name so I kept using it .
in this kernel I'm following these rules :
Security. Always updated to latest available stable Linux & CAF patches.
Stability. Tested first by myself and with many other users before posting it here.
Smoothness. Smooth navigation is must, I hate lag.
Balanced. Performance and battery must be balanced.
Features
Fully based on CAF 3.18 kernel source with latest Linux-stable merged in.
Always updated to latest drivers i.e WiFi, sdfat, etc
Built using latest GCC 9.1.1.
Custom features are heavily based on Franco work.
Vibration intensity control.
Wakelock blocker enabled by default with user control (boeffla wakelock blocker).
Fsync control.
USB fast charge up to 900mA.
Westwood TCP enabled and used by default.
zRAM optimization. (Disabled by default)
Fingerprint boost. Slightly increase the unlock speed and make it respond faster.
Interactive governor tweaks and optimization.
Kcal support.
VR & low persistence support (WIP).
50% battery bug fix.
CAD project support.
Common android kernel fixes and optimization.
Wireguard Support
and many more.
Future plans
Adding more governors & I/O that favor performance / battery when needed.
Attempt to fully fix low persistence issue in daydream.
Making the kernel better after every release.
Telegram Group
Want to test latest betas? feature request? a suggestion ? or report your issue , join my kernel group , I'm much more active there and the group community there is the best.
Join Here
Kernel Version : RC1.2
Linux kernel version : 3.18.140
CAF tag : LA.UM.7.5.r1-05300-8x96.0
last update : 11/7/2019
TREBLE ONLY
Kernel Source
Downloads
Here
Credits
@Unjustified Dev
@OrdenKrieger
@nathanchance
@franciscofranco
@deega
@SaintZ93
All telegram testers who without them this kernel would not possible , Huge thanks to them
reserved for future use (FAQ & Changelog)
Changelog :
Update RC1.2
New in this update :
Merge latest CAF updates for both kernel and wifi (LA.UM.7.5.r1-05300).
Merge latest linux stable updates 3.18.140.
Merge latest aosp msm updates (up to 3 of july)
Add input boost again (disabled by default), enable it for extra performance using EXM or similar apps.
Remove Wireguard (temporary)
Compiled with GCC 10.
thank you, i will try it.
Edit: It works amazing! phone is much cooler than before but remained snappy performance. Awesome!
Great work baddar,thank you! My axon 7 has great performance and battery life again with the new os systems
Testing it right now
Does this kernel support DriveDroid? That's a feature I have been missing for a long time.
SkaboXD said:
thank you, i will try it.
Edit: It works amazing! phone is much cooler than before but remained snappy performance. Awesome!
Click to expand...
Click to collapse
Yep , very smooth and fast without any warm up during normal usage , any improvement in battery life ?
Predatorhaze said:
Great work baddar,thank you! My axon 7 has great performance and battery life again with the new os systems
Click to expand...
Click to collapse
you are welcome , enjoy it.
Fuilares said:
Testing it right now
Click to expand...
Click to collapse
how was your test ?
Kingo64 said:
Does this kernel support DriveDroid? That's a feature I have been missing for a long time.
Click to expand...
Click to collapse
Don't know what is this so I would say no.
@king1990 I went back to stock because aex and other custom ROMs i tried have delay when opening apps and it's very annoying. it open apps significantly slower than stock ROM. I set animations same as stock rom, 0.5x,0.5x and 1.0x. I can disable animations but it will look stuttery. Kernel is good, no question, but it wasn't enough for me to stay on custom rom.
With the current corruption happening on 5.x with GCC9, you're brave to use it. I would wait to know more about the issue first.
SkaboXD said:
@king1990 I went back to stock because aex and other custom ROMs i tried have delay when opening apps and it's very annoying. it open apps significantly slower than stock ROM. I set animations same as stock rom, 0.5x,0.5x and 1.0x. I can disable animations but it will look stuttery. Kernel is good, no question, but it wasn't enough for me to stay on custom rom.
Click to expand...
Click to collapse
No problem here and none of the users who tested the kernel reported that.
geearf said:
With the current corruption happening on 5.x with GCC9, you're brave to use it. I would wait to know more about the issue first.
Click to expand...
Click to collapse
what issue you mean ?
king1990 said:
what issue you mean ?
Click to expand...
Click to collapse
https://bugzilla.kernel.org/show_bug.cgi?id=203573
geearf said:
https://bugzilla.kernel.org/show_bug.cgi?id=203573
Click to expand...
Click to collapse
how is this related to android ?
king1990 said:
how is this related to android ?
Click to expand...
Click to collapse
It's the same kernel and the same compiler.
The corruption may only be limited to bcache, but maybe not.
geearf said:
It's the same kernel and the same compiler.
The corruption may only be limited to bcache, but maybe not.
Click to expand...
Click to collapse
We are using 3.18 kernel and a CAF one so nothing to worry about.
THis should work on RR6 right? I have vendor also but RR6 does not use it if I am remembering correct. anyway I am not getting a boot with RR 6 and I cant figure out why. I was on hellsgate before and i just went back and its booting again. Any ideas Maybe I cant simply flash over hellsgate, annoying.
madhits45 said:
THis should work on RR6 right? I have vendor also but RR6 does not use it if I am remembering correct. anyway I am not getting a boot with RR 6 and I cant figure out why. I was on hellsgate before and i just went back and its booting again. Any ideas Maybe I cant simply flash over hellsgate, annoying.
Click to expand...
Click to collapse
yeah if you get any ROM to boot then you can use my kernel and flash it over any other kenerl
king1990 said:
Yep , very smooth and fast without any warm up during normal usage , any improvement in battery life ?
you are welcome , enjoy it.
how was your test ?
Don't know what is this so I would say no.
Click to expand...
Click to collapse
So after few days I must say, that I got much better performance, but comparing to Hellsgate Reborn kernel battery life is worse.
Fuilares said:
So after few days I must say, that I got much better performance, but comparing to Hellsgate Reborn kernel battery life is worse.
Click to expand...
Click to collapse
well you can't get this performance for free but I doubt the hit in battery life is big.
king1990 said:
yeah if you get any ROM to boot then you can use my kernel and flash it over any other kenerl
Click to expand...
Click to collapse
Ok so any tricks to getting it to boot after flashing over hellsgate?
---------- Post added at 06:25 PM ---------- Previous post was at 06:24 PM ----------
Fuilares said:
So after few days I must say, that I got much better performance, but comparing to Hellsgate Reborn kernel battery life is worse.
Click to expand...
Click to collapse
How did you flash over hellsgate, I could not get it to boot. I cleared cache and no dice, anything else you did?
madhits45 said:
Ok so any tricks to getting it to boot after flashing over hellsgate?
---------- Post added at 06:25 PM ---------- Previous post was at 06:24 PM ----------
How did you flash over hellsgate, I could not get it to boot. I cleared cache and no dice, anything else you did?
Click to expand...
Click to collapse
it does not boot ? which RR are you trying and what vendor ?

Categories

Resources