Related
hi i need help my mi max 2 is hard bricked stuck in only edl mode i tried to fix it with xiaomimiflash tool but evry time i flash a new fastboot it shows error time write out or phone disconnected I even tried to use qfil even that doesn't work help me to bring back to life my phone and sorry for my bad English :/
Please Help me, i migrate from global rom to cn rom and failed, my nrm 3 bricked, it can't boot into fastboot mode or edl mode always show bricked screen/like a broken tv screen.
Can't even show nrm 3 logo from the start i press power button.
Please help me with tutor or something.
Thanks in advance
Sorry for my bad english.
Search on forum!!!
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
ZivasJR said:
https://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044
Click to expand...
Click to collapse
already try but failed, bcause i cant enter edl mode
darkleccy said:
already try but failed, bcause i cant enter edl mode
Click to expand...
Click to collapse
Show me what u get
RZaR2001 said:
Show me what u get
Click to expand...
Click to collapse
Still same error sir, still with brick screen and didnt show nubia logo from the start this phone turned on. im already tried test point with cable to force enter edl mode and flash using nrm3 unbrick tool and still error/bricked screen.
Can somebody give me stock firmware with include prog_emmc_firehose, rawprogram.xml and patch.xml because i want to try flash using Qfill.
darkleccy said:
Still same error sir, still with brick screen and didnt show nubia logo from the start this phone turned on. im already tried test point with cable to force enter edl mode and flash using nrm3 unbrick tool and still error/bricked screen.
Can somebody give me stock firmware with include prog_emmc_firehose, rawprogram.xml and patch.xml because i want to try flash using Qfill.
Click to expand...
Click to collapse
Bro take a video for ur phone when u opening it
---------- Post added at 01:38 AM ---------- Previous post was at 01:30 AM ----------
darkleccy said:
Still same error sir, still with brick screen and didnt show nubia logo from the start this phone turned on. im already tried test point with cable to force enter edl mode and flash using nrm3 unbrick tool and still error/bricked screen.
Can somebody give me stock firmware with include prog_emmc_firehose, rawprogram.xml and patch.xml because i want to try flash using Qfill.
Click to expand...
Click to collapse
Bro take a video for ur phone when u opening it
RZaR2001 said:
Bro take a video for ur phone when u opening it
---------- Post added at 01:38 AM ---------- Previous post was at 01:30 AM ----------
Bro take a video for ur phone when u opening it
Click to expand...
Click to collapse
https://files.fm/u/yrbhjj8y
this is my video link sir.
i still can get a phone call and entering game mode but my screen always blank
darkleccy said:
https://files.fm/u/yrbhjj8y
this is my video link sir.
i still can get a phone call and entering game mode but my screen always blank
Click to expand...
Click to collapse
Something similar happened to me when I tried to flash the chinesse ROM , but I were able to enter in fastboot and EDL mode. I think there is something wrong with the chinese ROM... Try using the global unbrick tool if you didn't try it, it seems like the smartphone works without the screen, so just connect it to the pc and look at the device manager, there is a possibility of that the pc recognise your phone in EDL mode.
Perseo99 said:
Something similar happened to me when I tried to flash the chinesse ROM , but I were able to enter in fastboot and EDL mode. I think there is something wrong with the chinese ROM... Try using the global unbrick tool if you didn't try it, it seems like the smartphone works without the screen, so just connect it to the pc and look at the device manager, there is a possibility of that the pc recognise your phone in EDL mode.
Click to expand...
Click to collapse
I already do that, my nrm3 can enter edl and detected on my pc qualcom 9008, i flash witn with nrm3 unbrick tool and still failed, still got bricked screen.i think i need stock firmware including prog_emmc_firehose , rawprogram.xml and patch.xml because i want to flash via Qfill
If you can get into EDL mode the posted recovery tool will work. This could be a perfect timing hardware failure. If it is then there is nothing you can do. Flashing that voided the warranty and they can tell.
I dont see how you could cause the EDL to not work unless you were messing with some really deep stuff.
darkleccy said:
I already do that, my nrm3 can enter edl and detected on my pc qualcom 9008, i flash witn with nrm3 unbrick tool and still failed, still got bricked screen.i think i need stock firmware including prog_emmc_firehose , rawprogram.xml and patch.xml because i want to flash via Qfill
Click to expand...
Click to collapse
bro i hve got the same problem , did you worked it out?
I have faced a similar issue in the past but it was easily resolved by the unbrick tool.
I think something is wrong with your unbrick tool try re-downloading unbrick tool.
also i asked the service center of nubia bout rooting and they said the warranty will not get void as they repaired my phone even after it was rooted and was working cn rom.
Which error unbrick tool give you??
I was trying to install Arrow OS custom ROM to Motorola one power using TWRP. It got flashed, when I flashed the Gpps Rom with it, it didn't flashed and I rebooted the phone right there. The phone is now in a hard brick mode and is not responding to anything, is there anything I can do to fix it? Could you please guide me with the complete procedure?
You must use a blankflash to boot bootloader.BlankFlash available for
Moto One Power (Chef) https://mirrors.lolinet.com/firmware/moto/chef[/
.1 install Motorola drivers,2 install quallcom drivers for Motorola procesor(gsmusbdrivers.com/download/qualcomm-hs-usb-qdloader-9008-driver-64-bit-windows) .3 use flashbat in blankflash directory,4 press volume down and power on phone.5 connect phone with pc and proces will be starting.if your phone starting in bootloader mode ,you can flash stock room
Thank you for your help and response. I followed the steps as you mentioned. On step 3 when I run the Flashbat file, It gives the below error, and the phone never started
[112.478] ReadFile() failed, GetLastError()=0
[125.434] ReadFile() failed, GetLastError()=0
when blankflash starting you can release the wolume and power.try differrent usb port in pc.I have the same problem with custom roms,You see port com in device manager on pc?
It worked, but how did you know all this? Just spot on :good:
I tried this method but not working on my phone, xt1942-1. This is the Chinese version p30 note I got from AliExpress. I see the device in device manager as port 9008
Any help would be appreciated!
Hi,you are try change a port USB in PC?this method works,my phone is the same like your,Moto p30 note from aliexpress
Thanks, I tried all usb ports on my pc but same problem. Should we press power and volume down buttons after connecting to pc? Please help I just got this phone today and bricked right away ...
Also there are two blankfash versions on the link you provided which one to use?
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
dadm said:
Hello again.you can reinstall drivers,change partition with blankflash folder.last time when I'm bricked my phone ( trying flash customrom )I waste half day to recover my moto.im change drivers,folders,USB port,try the same on laptop and nothing.But when I'm wakeup morning and try one more time it's works!I don't no why,maybe I'm stupid,but I think is a problem with drivers or something.You must try more and more,and do not give up!I'm use blankflash from Android 9
Click to expand...
Click to collapse
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
htcmusic said:
I tried again today and Voila its working! Blankflash literally tests your patience. Thanks @dadm for your suggestions and now I have a working moto one power as my daily driver!
Click to expand...
Click to collapse
Hi @dadm I could not get my SIM card detected in RR rom and tried to flash stock again. Now I am in a bootloop whatever I do. Which stock did you use to revert back? And is your SIM card detected?
I have a few questions if anyone could answer. I am looking to get hands on this phone but making sure everything goes as I expect.
1.Does any member have knowledge which of this Device variants (XT1942-1, XT1942-2, XT-942-3) qualify for "Unlocking Boot-loader" and which variant does not support unlocking. I am lookig for 4/64gb Chef.
2. Is there Any Custom Pie Rom with Solid stability + Efficient & Effective Kernel?
3. Does stock Motorola Camera app works 100% in a custom flashed Rom as it does in Stock Rom or we have to use Google Pixel Camera apps as an alternative?
4. Is there anyway to get back to stock image from Custom rom.
5. How to recover the device from a Hard Brick.
6. Not but least. How well this device performs while playing PUBG.
Phone flashing locked and stuck at fastboot mode
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Ravi2730 said:
I have done a stupid thing after flashing stock ROM I have flashed twrp and my stock ROM was stuck at loop after that I have locked the device and it showing it device is corrupted and will not boot
Could any body help me plss.??
I tried this blankflash.bat but it showing <waiting for device> my phn is already connected to pc
Click to expand...
Click to collapse
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Thanks for reply
sd_shadow said:
Phone must be in EDM to flash blankflash
Sent from my ali using XDA Labs
Click to expand...
Click to collapse
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Problem solved
Ravi2730 said:
Actually how to enter EDM mode could you pls explain in steps my phone just start into fastboot,no recovery, no boot. Pls help me bro.
Click to expand...
Click to collapse
Anyone stuck in fastboot when it shows your phone is corrupt and will not boot just flash the command
fastboot boot boot.img file in stock room phn will automatically start everything working it work as a flash...?
Good day everybody
Straight to the point. I tried to flash a different rom, EU version of MI6X MIUI on my device and suddenly, at the reboot after the flash, the screen remained black.
Strange thing is that the device is still detected through usb on my pc, even on MiFlash its detected. But i cannot do anything, tried flashing a rom with Miflash but i get Catastrophic Error!
Please someone help me i dont want to change this phone!
Thank you so much!
Edit: after researching, i seem to be stuck in a useless EDL mode. My pc can detect the phone (Qualcomm 9008), but MiFlash cannot flash anything. The flash starts and based on the version of MiFlash im using gets stuck after a couple of seconds. for a different reason (Authentication on 2018 version, Send configure command on 2015 version) I dont understand. Please help
Marduk666 said:
Good day everybody
Straight to the point. I tried to flash a different rom, EU version of MI6X MIUI on my device and suddenly, at the reboot after the flash, the screen remained black.
Strange thing is that the device is still detected through usb on my pc, even on MiFlash its detected. But i cannot do anything, tried flashing a rom with Miflash but i get Catastrophic Error!
Please someone help me i dont want to change this phone!
Thank you so much!
Edit: after researching, i seem to be stuck in a useless EDL mode. My pc can detect the phone (Qualcomm 9008), but MiFlash cannot flash anything. The flash starts and based on the version of MiFlash im using gets stuck after a couple of seconds. for a different reason (Authentication on 2018 version, Send configure command on 2015 version) I dont understand. Please help
Click to expand...
Click to collapse
if it is in EDL you are in luck .
follow this guide :
https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-unbrick-arb-edl-t3846426
KevMetal said:
if it is in EDL you are in luck .
follow this guide :
https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-unbrick-arb-edl-t3846426
Click to expand...
Click to collapse
Hey thanks!
But i already tried this, with no luck. Miflash doesnt allow me to flash anything. Can you maybe suggest why?
Marduk666 said:
Hey thanks!
But i already tried this, with no luck. Miflash doesnt allow me to flash anything. Can you maybe suggest why?
Click to expand...
Click to collapse
i can only tell if you can tell me exactly your error
KevMetal said:
i can only tell if you can tell me exactly your error
Click to expand...
Click to collapse
On MiFlash 2018 for example, i get the Not Authorized to Download error.
Maybe the fact that i tried to flash a global rom is the problem?
Try to install twrp , and flash hex kernel , and them flash EU rom, if is not possible , try to flash vía TEST POINT
Enriquecalong said:
Try to install twrp , and flash hex kernel , and them flash EU rom, if is not possible , try to flash vía TEST POINT
Click to expand...
Click to collapse
That is the point. Its already in EDL mode, and my pc sees the phone. But Miflash doesnt allow me to flash because of authorization.
Marduk666 said:
On MiFlash 2018 for example, i get the Not Authorized to Download error.
Maybe the fact that i tried to flash a global rom is the problem?
Click to expand...
Click to collapse
that error is because of your ARB .. DOwnload the latest rom with highest ARB level ...like explained in the guide
if you have latest rom with highest ARB level but still get errors start trying all different versions of Miflash ..I tried three or four before I found one which worked ..
KevMetal said:
that error is because of your ARB .. DOwnload the latest rom with highest ARB level ...like explained in the guide
if you have latest rom with highest ARB level but still get errors start trying all different versions of Miflash ..I tried three or four before I found one which worked ..
Click to expand...
Click to collapse
So i tried again with this release V10.3.6.0.PDCCNXM_20190816.0000.00_9.0_cn, with multiple different miflash builds, same error. Tried patching the rom and not. Nothing worked, same edl authentication problem.
I believe, pretty sure, this is the build that bricked the phone: xiaomi.eu_multi_MI6X_8.6.28_v10-8.1
Maybe it can help you understand better? Also, how do i determine which is the highest ARB build available?
Thank you so much for the help!
KevMetal said:
that error is because of your ARB .. DOwnload the latest rom with highest ARB level ...like explained in the guide
if you have latest rom with highest ARB level but still get errors start trying all different versions of Miflash ..I tried three or four before I found one which worked ..
Click to expand...
Click to collapse
Found out how to get the ARB level, but still, i think i stuck on ARB4 and even if i flash an ARB4 rom, which i tried, i just get the same error. Really dont now what to do.
Marduk666 said:
Found out how to get the ARB level, but still, i think i stuck on ARB4 and even if i flash an ARB4 rom, which i tried, i just get the same error. Really dont now what to do.
Click to expand...
Click to collapse
you need to download and try many different versions of Miflash
---------- Post added at 02:41 PM ---------- Previous post was at 02:37 PM ----------
Marduk666 said:
So i tried again with this release V10.3.6.0.PDCCNXM_20190816.0000.00_9.0_cn, with multiple different miflash builds, same error. Tried patching the rom and not. Nothing worked, same edl authentication problem.
I believe, pretty sure, this is the build that bricked the phone: xiaomi.eu_multi_MI6X_8.6.28_v10-8.1
Maybe it can help you understand better? Also, how do i determine which is the highest ARB build available?
Thank you so much for the help!
Click to expand...
Click to collapse
did this brick happen when you wanted to change from jasmine to wayne ?
the error you are getting is your phone was stuck in EDL too long ...if you wait for more than 10 seconds you get error ..
open your phone manually amd enter edl again with test point
change to Miflash amd flash but dont wait longer than few seconds
also try with QFIL ...sometimes it will work when Miflash has timeout error
and every error is different ..if you dont tell me the error i can not say ..if you bricked with the 8.1 rom you dont have bad situation .. low ARB ..or if you used conversion zip you wont have ARB and your problem is you are too long in Edl mode
try to enter fastboot by holding power and volume down for very long time ..
if it doesnt work your only way is test point ..im sure you dont want that problem but it is all
explain your errors better if you want success ...if you go to fastboot see if computer will listen to command
fastboot oem edl
try the flashing again .....
look below
KevMetal said:
you need to download and try many different versions of Miflash
---------- Post added at 02:41 PM ---------- Previous post was at 02:37 PM ----------
did this brick happen when you wanted to change from jasmine to wayne ?
the error you are getting is your phone was stuck in EDL too long ...if you wait for more than 10 seconds you get error ..
open your phone manually amd enter edl again with test point
change to Miflash amd flash but dont wait longer than few seconds
also try with QFIL ...sometimes it will work when Miflash has timeout error
and every error is different ..if you dont tell me the error i can not say ..if you bricked with the 8.1 rom you dont have bad situation .. low ARB ..or if you used conversion zip you wont have ARB and your problem is you are too long in Edl mode
try to enter fastboot by holding power and volume down for very long time ..
if it doesnt work your only way is test point ..im sure you dont want that problem but it is all
explain your errors better if you want success ...if you go to fastboot see if computer will listen to command
fastboot oem edl
try the flashing again .....
Click to expand...
Click to collapse
Ok so, ill retry explaining
I was on a CHINA Wayne MI6X originally, unlocked bootloader and TWRP. It was only updated through OTA and never flashed any custom rom before.
Then, i tried through TWRP to flash this build xiaomi.eu_multi_MI6X_8.6.28_v10-8.1, which is a EU rom, think it is A2 rom and the devices reboot to a black screen, EDL mode.
After, i tried flashing many different versions of WAYNE CHINA roms through different builds on MiFlash but none worked. MIUI 10, 11, even 9 but always get EDL AUTHENTICATION error.
So, CHINA to EU to EDL bricked phone.
Now, i tried rebooting to fastboot holding for a long time VOL- POWER button but adb doesnt see the phone, i think im still in EDL mode, because device managaer sees it as QUALCOMM 9008.
Also, now on MiFlash 2014 i get Error loading type library/DDL. (0x80029c4a: wait port ready to use 9)
Same on MiFlash 2015 and 2016.
On MiFlash 2018 i get EDL AUTHETICATION error.
Same o Miflash 2017.
Let me know if you understanded better, still, thank you again!
Marduk666 said:
Ok so, ill retry explaining
I was on a CHINA Wayne MI6X originally, unlocked bootloader and TWRP. It was only updated through OTA and never flashed any custom rom before.
Then, i tried through TWRP to flash this build xiaomi.eu_multi_MI6X_8.6.28_v10-8.1, which is a EU rom, think it is A2 rom and the devices reboot to a black screen, EDL mode.
After, i tried flashing many different versions of WAYNE CHINA roms through different builds on MiFlash but none worked. MIUI 10, 11, even 9 but always get EDL AUTHENTICATION error.
So, CHINA to EU to EDL bricked phone.
Now, i tried rebooting to fastboot holding for a long time VOL- POWER button but adb doesnt see the phone, i think im still in EDL mode, because device managaer sees it as QUALCOMM 9008.
Also, now on MiFlash 2014 i get Error loading type library/DDL. (0x80029c4a: wait port ready to use 9)
Same on MiFlash 2015 and 2016.
On MiFlash 2018 i get EDL AUTHETICATION error.
Same o Miflash 2017.
Let me know if you understanded better, still, thank you again!
Click to expand...
Click to collapse
ok man i think you made a big mistake flashing that package because it locked your bootloader ( i think ) ....
if the computer can see your phone as qualcomm9008 it is in EDL mode
you can save your phone but the authentication error ..could be ARB or locked bootloader ..
but anyway your best and ONLY option now is to get android 10 .zip for Wayne ...latest update for MIUI .. then
follow the instructions in the unbricking thread i sent you ..unzip ..search for folder in MIFLASH ..
-download QFIL flasher ..install and run AT SAME TIME
- select the choose port manually option and leave window open
( so three windows open .. miflash ( ready ) ... QFIL with sekect port open )
- then connect your usb cable to computer ( not phlone )
- get a paperclip and open it and fold it in half to look lkke tweezers
- then on another phone or computer follow video on how to open phone and do test point ( you will hold the twi points of the paperclip on two points in the phone )
- while holding the pin on the points insert usb to phone with free hand
- look at the select port manually window of QFIL ...when you see a device appears here let go of pin ..
now say okay to close sekect port window so it closes ..
- on Miflash press " refresh " then "flash" QUICKLY ..dont wait longer than 10 sec
- it will start to flash
*to opem your phone you need a guitar pick to push between the screen and body ...also special screw driver ( buy on Amazon ) to remove screws you see in video ..
# the reason is your phone has been too long in EDL to flash anymore ..so if you cant exit and enter EDL withbuttons or fastboot you ONLY have one option and that is testpoint
#that is why i said it must in 10 sec after you enter EDL that you flash or you will just have more errors everytime
***then you must just continue to enter and exit tesrpoint using my technique until one copy of Miflash will finish without error .BUT KEEP IN MIND ..everytime you fail you need to start over bevause too much time passed since you were in EDL
******dont lose hope beause miflash will accept and flash the officiak rom ARB4 ... if you find the right miflash version amd start flashing before EDL timeout
good luck bro go watch testpoint video and search for a guitar pick and screwdriver
KevMetal said:
ok man i think you made a big mistake flashing that package because it locked your bootloader ( i think ) ....
if the computer can see your phone as qualcomm9008 it is in EDL mode
you can save your phone but the authentication error ..could be ARB or locked bootloader ..
but anyway your best and ONLY option now is to get android 10 .zip for Wayne ...latest update for MIUI .. then
follow the instructions in the unbricking thread i sent you ..unzip ..search for folder in MIFLASH ..
-download QFIL flasher ..install and run AT SAME TIME
- select the choose port manually option and leave window open
( so three windows open .. miflash ( ready ) ... QFIL with sekect port open )
- then connect your usb cable to computer ( not phlone )
- get a paperclip and open it and fold it in half to look lkke tweezers
- then on another phone or computer follow video on how to open phone and do test point ( you will hold the twi points of the paperclip on two points in the phone )
- while holding the pin on the points insert usb to phone with free hand
- look at the select port manually window of QFIL ...when you see a device appears here let go of pin ..
now say okay to close sekect port window so it closes ..
- on Miflash press " refresh " then "flash" QUICKLY ..dont wait longer than 10 sec
- it will start to flash
*to opem your phone you need a guitar pick to push between the screen and body ...also special screw driver ( buy on Amazon ) to remove screws you see in video ..
# the reason is your phone has been too long in EDL to flash anymore ..so if you cant exit and enter EDL withbuttons or fastboot you ONLY have one option and that is testpoint
#that is why i said it must in 10 sec after you enter EDL that you flash or you will just have more errors everytime
***then you must just continue to enter and exit tesrpoint using my technique until one copy of Miflash will finish without error .BUT KEEP IN MIND ..everytime you fail you need to start over bevause too much time passed since you were in EDL
******dont lose hope beause miflash will accept and flash the officiak rom ARB4 ... if you find the right miflash version amd start flashing before EDL timeout
good luck bro go watch testpoint video and search for a guitar pick and screwdriver
Click to expand...
Click to collapse
Thank a lot man, really! But i DID IT! Following this guide! https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Now my phone works again, thank you a lot still, for you patience!
Marduk666 said:
Thank a lot man, really! But i DID IT! Following this guide! https://miui.blog/mi-6x/unbrick-mi-6x-wayne/
Now my phone works again, thank you a lot still, for you patience!
Click to expand...
Click to collapse
ok good work it is a good guide and it will help other people if they have trouble finding modified programmer files or connecting the phone and flashing quickly enough
here the difference was that i assumed but forgot to remind you to use the patched programmer files not to be rejecting but it was also included in the post of other XDA guy :good:
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Use latest fastboot rom and download agent to mtk all.bin
Restart phone by power+ volume key
Also usb dk driver and libusb tool
Or remove back cover and battery take care with fingerprint
Already done everything you said, nothing works.
iOussamato_ said:
Already done everything you said, nothing works.
Click to expand...
Click to collapse
Try again
faisal9666 said:
Try again
Click to expand...
Click to collapse
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
iOussamato_ said:
What do you mean try again? I tried it 50 times and still doesn't work, tried so many other roms and DAs and NOTHING
Click to expand...
Click to collapse
Very strange
STATUS_EXT_RAM_EXCEPTION (0xC0050005)
1.
Hello bro, I only registered on XDA to inform you and gonna post on other thread for people suffering from this error.
2.
I have redmi 9c angelica
3.
I had the same issue like yours. Just fixed it 2,3 mins ago after many days of suffering. I tried 3 fastboot roms in which only this work (angelica_global_images_V12.0.12.0.QCRMIXM_20210412.0000.00_10.0_global). I hope it also work with you. Give a try
i followed this and boom now all of my stress has been released.
Firmware link
How to Unbrick Redmi 9C (angelica) without using auth account. Tested and working! - OmBob Opreker
This is tutorial how to unbrick Xiaomi Redmi 9C (angelica) using mediatek bypass tool and sp flash tools without using mi auth account using global stock
ombob.my.id
iOussamato_ said:
Can anyone please help me? I did the all steps but nothing works and I get the STATUS_EXT_RAM_EXCEPTION (0xC0050005) error... The only solution I found is to drain the battery while the device is bootlooping but sadly, my phone vibrates 1 second and dies because there is no fastboot or recovery or nothing to boot with, I tried SP Flash Tool but it stucks at Download DA 100% then shows me the ram error. PLEASE HELP ME
P.S: I know people will say MTK Bypass is a virus but please ignore it and focus on my main subject
Click to expand...
Click to collapse
use this video 100% working
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
demoimoet said:
Device locked and need test point. You can't use MTK bypass and SP Flashtool directly. Your device may have patch on July 2022 and newest version (12.5.3 and above).
And if you see 3 dot pin for TP, it's Redmi 9c but if you found only 1 point (for TP), it's Redmi 9c NFC.
Remember to use TP for any operation and if not work, TP with Professional software.
Click to expand...
Click to collapse
where are test points located?
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Ivan.Adriazola said:
did you try Yurian's post info, my phone was totally bricked and thats what kinda worked, I left extensive guides on how I did it on there too
also, here are the files that worked for me (redmi 9a, not the exact same but its pretty similar)
your ROMs should be these (use the fastboot one, to the best of my knoledge, the recovery one only changes the recovery hence, its useles to unbrick) if that doesnt work try ROMs for different regions or a one previous version (I dont recomend this because MI is super against downgrading so they f-up your phone if you try) always with the fastboot one
View attachment 5859871
the scatter should be on ROM/images
if that scatter doesnt work, try the ones I provided, theyre for a different version but hey, in for a pound, if its already hard bricked you may as well try crazy stuff, I would suggest you look for the correct scatters online, but I have some slight experience looking for android files and I couldnt find any that are the correct ones.
Lastly, Im just a nobody that unbricked his device and got a little confident, I know next to nothing about phone config, that said, I do think I know more than most but I dont know if scatter files are completely imposible to be compatible between versions or even the ROMs, most Custom ROM work in both 9a and 9c so I think they might, but IDK.
Click to expand...
Click to collapse
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
if you wan
ax0 said:
Hello! Thanks so much for replying
I still get the same issue, it just shows a screen for a split secconds and then turns off
Click to expand...
Click to collapse
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Ivan.Adriazola said:
if you wan
t to some day we could hop on a discord call and see if I can help you in any way, although I doubt it since our hardwares arent exactly the same
Click to expand...
Click to collapse
sure my discord is axon#7061
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
brav3h3ar8 said:
same problem but fixed,try tft free tool.here are the steps.
1.remove battery connection,do not connect untill flashed
2.open tft tool,go to mtk section flash scatter
3.connect mobile while holding both volume bouttons
4.now tft tool starts flashing but failed & rebooting device
5.now remove cable & connect battery,bootup
Hoping this should work for you,mine is fixed that way
Click to expand...
Click to collapse
thank you so much
idk why but TFT managed to fix it!
ax0 said:
thank you so much
idk why but TFT managed to fix it!
Click to expand...
Click to collapse
It's my pleasure
ax0 said:
sure my discord is axon#7061
Click to expand...
Click to collapse
Hello, please add me, I'm desperate how to do this :-(
ax0 said:
Exact same issue,
exact same error,
exact everything.
I ended up flashing using KERDISH Team's SP Flash Tool BUT it still does not wanna boot
When I press the combination to boot into fastboot it vibrates but and shows a screen for a split second.
When I try to boot it up normally it just shows again a screen for a split seccond
And when I try to boot into recovery using again the combination it shows AGAIN the screen for a split secconds
Any help appriciated!
Click to expand...
Click to collapse
Hi,
Just follow the steps and you'll be good.
[Guide] How to unbrick redmi 9C by flashing with SP Tools without Auth file(Tested Working)
This is a last ditch effort to restore your phone to working order. This should only be used if your phone DOES NOT BOOT AT ALL or if you are unable to boot into FASTBOOT. If you can boot into Fastboot mode then I would encourage you to flash...
forum.xda-developers.com
I already tried it with my device and it works well.