Database Develop

[64BIT][KERNEL][V1.7][CM12.1/CM13][24-NOV-2015] Cyanpro Kernel for yureka

# I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
# Please read the thread carefully before deciding to flash this kernel.
This kernel will focus on quality over quantity, I will add only those features which don't cause instability and really improve performance or battery life of our device, you may request for a feature and I will consider about it. If you want overclock or nitros to fly or burn some rubber, you are free to use another kernel.
Feature list-
-Up to date with cm amss-1.0.2 source in every release
-Compiled with UBERTC/SABERMOD optimized for 64 bit
-Cpu governors: darkness, impulse, elementalx
-Cpu hotplugs: thunderplug core hotplugging
-Kcal driver for managing display saturation
-Fast charging: thundercharge
-Dynamic Fsync by faux123
-Adreno idler for saving battery
-Powersuspend for saving battery
-Cpu undervolt about 10% for saving battery
-Disabled crc check for 30% faster IO
-Default cpu and gpu clock speed for stability
-Disabled unused fat kernel features
-Ofast flags instead of O2
-Entropy tweaks
-Added frandom driver
-NTFS support
-Enabled swap
-Vibration Control
Installation-
-Download Cyanpro zip
-Boot into recovery
-Flash Cyanpro zip
-Wipe dalvik cache
-Reboot and enjoy
Downloads-
Cyanpro V1.7
My Source-
Github
Credits-
VarunChitre, AudioGod, Faux123, Franciscofranco, neobuddy.
Thanks to SiddheshK15 for helping me setup things.
Please remind me if I missed someone
XDA:DevDB Information
Cyanpro kernel for tomato, Kernel for the YU Yureka
Contributors
umangleekha
Source Code: https://github.com/umang96/Cyanpro
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: V1.7
Stable Release Date: 2015-10-09
Created 2015-10-09
Last Updated 2015-10-09

Performance Settings For V1.7-
Cpu(big): 200-1459mhz (impulse)
Cpu(small): 200-1113mhz (impulse)
Cpu hotplug: Thunderplug
Min cores screen off: 1
Gpu max freq: 550mhz
Sampling rate: 550
Load threshold: 60
IO scheduler internal: BFQ
IO scheduer external: BFQ
Vfs cache pressure: 60
All other settings to be left default.
Battery Settings For V1.7-
Cpu(big): 200-1344mhz (darkness)
Cpu(small): 200-998mhz (darkness)
Cpu hotplug: Thunderplug
Min cores screen off: 1
Gpu max freq: 465mhz
Sampling rate: 550
Load threshold: 60
IO scheduler internal: BFQ
IO scheduer external: BFQ
Vfs cache pressure: 60
All other settings to be left default.
Changelog-
V1.7-
-Updated to latest source amss-1.0.2
-Redone undervolt same as previous versions
-Now expect battery backup as good as V1.3
-PM: devfreq: Use high priority workqueue
-Tick: don't update idle time if cpu offline
-Added ElementalX cpu governor
-Android M 6.0 and CM13 support
V1.6-
-Updated to latest source amss-1.0.2 branch
-Fixed heating issue, now new thermal config
-Fixed sometimes little cluster not setting min frequency
-Little better response for touch driver
-Added TCP controls, westwood default
V1.5
-Updated thunderplug and thundercharge by varun chitre
-Now two versions, Ubertc (battery) and Sabermod (performance)
-Some improvements to touchscreen driver, faster wakeup
-Default hotplugging algo is per core hotplug
-Added and enabled bfq IO scheduler
-Merged latest commits from amss-1.0.2 branch
V1.4-
-Fixed bootloader related issues for yureka plus
-Permanently fixed WiFi bug for roms like AICP, RR etc.
-Merged latest cm commits of amss-1.0.2 branch
-More stability and less wakelocks
V1.3-
-Adjusted undervolt for more battery backup
-Entropy tweaks for more responsiveness
-Merged latest source of amss-1.0.2 branch
-Improved darkness governor, more responsiveness
-Added NTFS support
-Some optimizations
-Enabled swap
V1.2-
-Only thunderplug now, other hotplugs causing instability
-Compiled using UBERTC for AARCH64
-Clean build with fixes and more stability
-Custom build script
-Enable swap
V1.1-
-Added intelliplug hotplug
-Added frandom driver
-Optimized undervolt
-Disabled some unused functions
-Ofast flags instead of O2 to improve performance
-Super battery backup with smooth performance now

What is r24 or r18 roms?

can this kernel be flashed on stock rom!! cm 12.1??

download links not working please make new links
r24

great work umang bro

Updated Thread

sir kernel is awesome thanks a lot for your work...
sir i had a doubt that can we delete the kernel auditor app after changing the settings??

Will this work on stock cm12????? as currently I'm using sandy kernel and battery life is average with often soft reboots

Kernel updated, check OP.

umangleekha said:
Kernel updated, check OP.
Click to expand...
Click to collapse
sir we need to flash any one of them right??

Answer my question as well please !!!!?

gtsfreak said:
Will this work on stock cm12????? as currently I'm using sandy kernel and battery life is average with often soft reboots
Click to expand...
Click to collapse
No, not on stock cm12, but it will work on updated stock cm12.1
rishivg said:
sir we need to flash any one of them right??
Click to expand...
Click to collapse
Yes, only one, all are same but are optimized for battery or balance or performance, choose any one.

Great work bro,
but bro can i flash this in yureka plus.
And are you updating this kernel soon or is it updated one.
If your updating it soon then please let me know when you will going to update, i will flash latest one.

Compatible with cm13 ?
Plz tell

Does this kernel support fast charge through PC?
---------- Post added at 01:37 AM ---------- Previous post was at 01:37 AM ----------
baratheon16 said:
Plz tell
Click to expand...
Click to collapse
It does say so in the OP.

can it used in blisspop 4.0.3

adamnp2000 said:
can it used in blisspop 4.0.3
Click to expand...
Click to collapse
yes

when i flashed this kernel over CM13 by santosh it was successfully installed bt wen i booted into system and checked phone info, it was still d stock kernel. Is it because i did not wipe cache and dalvic after flashing??

@umangleekha
Kernel is great but is it normal, GPU Freq sticking to 550Mhz all the time?
Stock CM12.1

[Kernel][osprey] SomeFeaK for Moto G 2015 (3rd gen.)

This is SomeFeaK kernel, based on Squid2's kernel for device codename "osprey".
This is the first time I build a kernel, also, the first time I post something in DevDB. Hope you like this kernel and please expect many releases.
The kernel should work in stock and custom ROMs, with any variant. Tested and working in XT1601 (LATAM).
Disclamier:
Code:
[COLOR="red"]* Include <std_disclaimer.h>
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*[/COLOR]
Features:
From squid2's r19 build:
Moderately undervolted
Updated to Linux 3.10.104
Synced with latest CodeAurora changes
Improved memory management
Improved memory caching backported from Linux 3.15
Improved storage performance
Optimized ARM crypto routines
Updated f2fs and WiFi drivers
FIOPS and BFQ I/O schedulers
Lionfish CPU governor
IntelliPlug CPU hotplug (by faux123)
KCAL MDP5 colour control (by savoca)
Improved zRAM backported from Linux 4.9
Vibration intensity control
Compiled with Linaro GCC 6.2 and optimized for Cortex A53
Stripped down and optimized configuration
Added by me:
Governors: impulse and elementalX, yankactive, zzmoove, darkness and bioshock.
Double tap to wake (DT2W).
Permanently fixed screen flickering: SELinux works fine in permissive or enforcing mode.
Enabled advanced TCP congestion managers: veno, westwood, vegas, illinois, and more.
Drastically improved CPU thermal control: should react approximately from 40°C and end if lower than 35°C are reached. Otherwise it'll keep trying to cool the device, protecting, mainly, the battery.
Automatic thermal throttling and CPU cooling driver added and enabled.
Enabled CPU current throttling driver.
Use the hidden LED as a notification light.
Enabled forced consistency checks for F2FS (/data).
Multi-Cluster Power Management (less CPU battery drain).
KSM (Kernel Samepage Merging).
Advanced Power Management (emulated).
SMT (Simultaneous Multi-Threading).
Fixed temperature handling.
Dev info:
In order to make use of the new hidden LED's available behavior, it's needed that some Java developer (not me, I don't know a thing about Java) to develop an application. Here I'll give you a sort of "API" that you should use to wake up the required triggers for "if there's a notification or not".
To turn on the LED set trigger to default-on:
Code:
su -c "echo default-on > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/trigger"
To turn off the LED set trigger to none:
Code:
su -c "echo none > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/trigger"
I've also added the required modules for the LED to be able to process a hold on during "x" milliseconds and keep off during "x" milliseconds. To set it do it like as follows.
Switch trigger to timer:
Code:
su -c "echo timer > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/trigger"
Now, set time on during 0,5 seconds (500 milliseconds):
Code:
su -c "echo 500 > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/delay_on"
Now, set time off during 1 second (1000 milliseconds):
Code:
su -c "echo 1000 > /sys/devices/soc.0/leds-atc-e3be1600/leds/charging/delay_off"
For now, you must have a charger connected. It seems to be a hardware issue but I'll try to investigate it anyways.
Click to expand...
Click to collapse
Release history:
Code:
4.53 (stable): June 16, 2017:
Kernel changes:
- fs: fsync will now be enabled by default (prevents data loss if a kernel panic occurs).
- cpu/hotplug: removed broken lazyplug hotplug driver, better handling for hardware hotplugging.
- cpufreq: added intellidemand, smartmax, wheatley, smartmax_eps, pegasusq, authority.
- input/touchscreen: updated DT2W driver, still not stable, more responsive and stable touchscreen.
- sched: fixed zen, fixed and added sio.
Other changes: first build for osprey coming soon.
4.30 (stable): June 14, 2017:
Kernel changes:
- hotplug: added lazyplug (broken, don't use).
- input/touchscreen: fixing DT2W.
- sched: added sio.
Other changes: none.
4.25 (stable): June 13, 2017:
Kernel changes:
- ksm: updated code and better management, enabled checking before swapping pages, reduce cpu
- swap: updated code, got better management by adding some compression drivers.
- input/soc: added powersuspend driver, this will help DT2W work better.
- random: added frandom support, decrease CPU load for entropy generation.
- mem: enabled memory changes tracking.
- sched: added tripndroid, vr, zen.
- usb: enabled fast charge by default.
Other changes: no tool required to setup anymore, default setup won't overheat your device nor damage it; due to recently added support for surnia, every new release will be respectively named with a suffix like '-harpia' or '-surnia'; new project logo (for DevDB), thanks to @lecron89 .
4.18 (stable): June 12, 2017
- cpu: rolled back extreme overclock, new max clock: 1593 MHz.
- gpu: rolled back extreme overclock, new max clock: 465 MHz.
- cpufreq: fix build for 'darkness' governor.
- cpufreq: added new CPU governors: yankactive, zzmoove, darkness and bioshock.
4.00 (stable): June 9, 2017
- cpu: undervolted and overclocked, max freq. 1785 MHz (recommended: 1593Mhz).
- gpu: overcloked, max freq. 650 MHz.
- flashing: fixed bug where the touchscreen would become unresponsive after any kernel update.
3.90 (stable): June 8, 2017
- usb: use your device as an USB gadget, including keyboard and mouse.
- general: updated defconfig for harpia at source to match new features.
3.81 (stable): June 7, 2017
- wlan: updated drivers, solved remaining crashes and battery drain.
- prima: updated drivers.
- usb: added support for xpad joysticks (XBOX).
- cpu: fixed hotplugging driver "thunderplug", used to crash the device while allowing the user to pick "octa-core mode" when it's a quad-core device.
- cpu: hotplugging driver "alucard", default minimum of 1 (one) cpu online.
- general: performance improvements for touchscreen, GPU and variables definition.
3.61 (stable): June 4, 2017
- Added S2S (Sweep to Sleep): swipe from the navbar from right to left or from left to right to make the device go to sleep.
3.60 (stable): June 4, 2017
- In the stock ROM, the audio won't skip anymore (tested).
- The wlan driver shouldn't crash again (updated with Heliox sources).
- Re-added missing Adreno Idler driver.
3.52 (stable): June 1, 2017
- Hotfix: DT2W won't freeze the screen anymore.
3.51 (stable): May 31, 2017
- Hotfix: re-added missing hotplug driver (thunderplug).
3.5 (stable): May 31, 2017
- Reverted patches for sdcardfs (they broke the media scanner).
- USB fast charge.
- FauxSound gain control.
3.11 (stable): May 29, 2017
- Patches for sdcardfs.
- Patches for wlan.
- Patches for less power consumption.
- Re-added missing features: KSM (Kernel Samepage Merging) and TCP congestion control algorithms (veno, illinois, westwood and vegas).
3.0 (stable): May 29, 2017
- Added governors: impulse and elementalX.
- DT2W (Double tap to wake).
- Adreno Idler (reduce GPU frequency and resources if inactive).
- Added hotplug drivers: allucard and thunderplug CPU.
2.1 (stable): Februrary 8, 2017
- Rolled back to default SELinux setup.
- Switched default GPU governor from "msm-adreno-tz" to "simple_ondemand" for better battery and performance balancing.
- Fixed screen flickering bug by disabling debugging in graphics card. (SELinux socket overflow).
- Fixed noisy output if using audio MODs by disabling aggressive debugging for sound card. (SELinux socket overflow).
2.0 (stable): February 5, 2017
- Permanently fixed the screen flickering: you won't see any flickers while running SELinux in permissive or enforcing mode. This is going to work even if you build the kernel from source.
1.3 (stable): January 31, 2017
- Enabled advanced TCP congestion managers: veno, westwood, vegas, illinois, and more.
- Set default TCP congestion manager to "veno" for lesser lags while heavily loading the networking area.
1.2 (beta): January 29, 2017
- Fixed SELinux: permissive mode works again.
- Decreased SELinux activity (even more).
1.1 (beta): January 29, 2017
- Restored previous setup for audio amplifier DAC: switched input gain from 4 to 5. Reason: the output felt like if it is cropping some frequencies.
- Modified CPU cooling driver to get more sensitivity as when to react and how far the temperatures should reach. (experimental, please report if horribly lags)
1.0 (beta): January 27, 2017
- Automatic thermal throttling and CPU cooling driver added and enabled.
- Enabled CPU current throttling driver.
- Decreased audio amplifier DAC input gain to 4 from 5 (solves distorted output while using audio mods like [B]Dolby Atmos[/B])
0.3 (experimental): January 26, 2017
- Added available triggers for LED to: show cpu usage by core, blink like heartbeat, blink with interval and full on.
- Disabled swap pages caching (frontswap).
0.2 (experimental): January 25, 2017
- Enabled swap pages compression.
- Enabled swap pages caching (frontswap): better RAM management.
- Enabled cleancache for faster swap handling.
- Decreased SELinux activity and removed almost every security check.
- Enabled F2FS forced consistency checks.
- Enabled Multi-cluster power management (even better power management and less temperature).
0.1 (experimental): January 24, 2017
- Initial release.
Downloads:
Click here or go to Downloads tab at the top of the thread.
If something goes wrong with the XDA download server or you simply want to download from somewhere else, I've been approved as developer at AFH. All downloads will also be posted here.
NEW! Ask for features, report bugs, get help with installation, usage and everything else. Join us at Telegram: t.me/somefeak
Bugs:
Doubled frequency on GPU clocking (465 MHz step repeats).
You tell me.
Bugs marked with a "*" will be fixed in the next release.
XDA:DevDB Information
SomeFeaK Kernel for Moto G 2015 (3rd gen.), Kernel for the Moto G 2015
Contributors
facuarmo, chijure, Dark98, squid2, TeamMex
Source Code: https://github.com/FacuM/android_kernel_motorola_msm8916
Kernel Special Features: The kernel features: everything from r19 Squid2's build, KSM (Kernel Samepage Merging), SMT (Simultaneous Multi-Threading), Advanced Power Management (emulated), advanced LED contro, DT2W and impulse and elementalX governors.
Version Information
Status: Stable
Created 2017-06-17
Last Updated 2017-06-27

Changelog (v4.53):
Kernel changes:
fs:
* fsync will now be enabled by default (prevents data loss if a kernel panic occurs).
cpu/hotplug:
* removed broken lazyplug hotplug driver.
* better handling for hardware hotplugging.
cpufreq:
* added intellidemand.
* added smartmax.
* added wheatley.
* added smartmax_eps.
* added pegasusq.
* added authority.
input/touchscreen:
* updated DT2W driver, still not stable.
* more responsive and stable touchscreen.
sched:
* fixed zen.
* fixed and added sio.
selinux:
* only show errors.
Other changes:
None.
Download:
Main link: https://forum.xda-developers.com/devdb/project/dl/?id=25196
Alternative link: https://www.androidfilehost.com/?fid=745425885120742248

Finally, thanks! Testing

Laloo' Hdez said:
Finally, thanks! Testing
Click to expand...
Click to collapse
No problem . Test and report back, please. I'd like to know if it's working.
Don't forget to join our Telegram group if you're interested on chatting, asking for features, help, etc.

facuarmo said:
No problem . Test and report back, please. I'd like to know if it's working.
Don't forget to join our Telegram group if you're interested on chatting, asking for features, help, etc.
Click to expand...
Click to collapse
Testing

facuarmo said:
No problem . Test and report back, please. I'd like to know if it's working.
Don't forget to join our Telegram group if you're interested on chatting, asking for features, help, etc.
Click to expand...
Click to collapse
Don't booting on MokeeROM 20170616

facuarmo said:
No problem . Test and report back, please. I'd like to know if it's working.
Don't forget to join our Telegram group if you're interested on chatting, asking for features, help, etc.
Click to expand...
Click to collapse
It's not booting on official RR for osprey.

It's not booting on Viper OS 2.0...

Thanks for testing, an experimental hotfix will be up in some minutes.

Changelog (v4.53-1):
EXCLUSIVE BUILD: only for osprey, fixed boot (cpu not starting).
Kernel changes:
None.
Other changes:
config:
* fixed defconfig for osprey.
Download:
Main link: https://forum.xda-developers.com/devdb/project/dl/?id=25198
Alternative link: https://www.androidfilehost.com/?fid=889764386195909633
I'm very thankful with everyone who had flashed and tried it.

@facuarmo, it still won't boot on official RR. I flashed the kernel, wiped cache and dalvik. It doesn't go past the boot logo.

adityak1303 said:
@facuarmo, it still won't boot on official RR. I flashed the kernel, wiped cache and dalvik. It doesn't go past the boot logo.
Click to expand...
Click to collapse
Thanks for reporting, please stay tuned at the Telegram group, I'm gonna throw away some exp. builds for you to test so I stop bothering with non-working builds. Please help .

facuarmo said:
Thanks for reporting, please stay tuned at the Telegram group, I'm gonna throw away some exp. builds for you to test so I stop bothering with non-working builds. Please help .
Click to expand...
Click to collapse
No problem. I'm there to help.

It's not booting up. Aosp extended 4.3 build. Doesn't get past to the boot logo.

it still won't boot on aospxtended. I flashed the kernel, wiped cache and dalvik. It doesn't go past the boot logo. Is the xt1543 variant

Changelog (v4.80):
Kernel changes:
sensors/accelerometer:
* fix bugs and driver random crashes.
sound/ALSA:
* fix crashes and crackling.
* get rid of inifinte loops.
video/kgsl:
* general performance and stability improvements.
power/wake:
* added wakelock toggles for wlan_rx, wlan_ctrl, wlan and bluesleep.
* better performance and responsiveness after suspend.
usb:
* less console spamming.
networking:
* speed improvements.
input/touchscreen:
* add generic touchboost driver.
cpufreq/general:
* prevent random scaling failiures.
Other changes:
flashing:
* added Aroma Installer. (only harpia)
* pick if you want to flash bootlogo or not thanks to Aroma Installer.
bootlogo:
* added built-in SomeFeaK's official bootlogo, made by @jasonmerc . P.S.: thank you so much.
Download:
Main link: https://forum.xda-developers.com/devdb/project/dl/?id=25334
Alternative link: https://www.androidfilehost.com/?fid=673368273298966924
Code:
MD5: 6de0da7f970db0b98321604a4ccb7dc8

facuarmo said:
Changelog (v4.80):
Kernel changes:
sensors/accelerometer:
* fix bugs and driver random crashes.
sound/ALSA:
* fix crashes and crackling.
* get rid of inifinte loops.
video/kgsl:
* general performance and stability improvements.
power/wake:
* added wakelock toggles for wlan_rx, wlan_ctrl, wlan and bluesleep.
* better performance and responsiveness after suspend.
usb:
* less console spamming.
networking:
* speed improvements.
input/touchscreen:
* add generic touchboost driver.
cpufreq/general:
* prevent random scaling failiures.
Other changes:
flashing:
* added Aroma Installer. (only harpia)
* pick if you want to flash bootlogo or not thanks to Aroma Installer.
bootlogo:
* added built-in SomeFeaK's official bootlogo, made by @jasonmerc . P.S.: thank you so much.
Download:
Main link: https://forum.xda-developers.com/devdb/project/dl/?id=25334
Alternative link: https://www.androidfilehost.com/?fid=673368273298966924
Code:
MD5: 6de0da7f970db0b98321604a4ccb7dc8
Click to expand...
Click to collapse
It works! thank you so much
I'm in MokeeROM 71.2 20170624

Laloo' Hdez said:
It works! thank you so much
I'm in MokeeROM 71.2 20170624
Click to expand...
Click to collapse
WOAH!!! THANKS FOR REPORTING. Finally got this booting on osprey, hope you enjoy it :fingers-crossed:.

facuarmo said:
WOAH!!! THANKS FOR REPORTING. Finally got this booting on osprey, hope you enjoy it :fingers-crossed:.
Click to expand...
Click to collapse
Booted on lineage os 14.1 official
---------- Post added at 06:04 AM ---------- Previous post was at 05:52 AM ----------

@facuarmo, the kernel is working on official RR for osprey. DT2W is also working fine for now. Would you recommend any particular governer or settings for good performance?

[kernel] [7.x.x] [Lineage/Aosp] Paradox Kernel R4 [condor]

Paradox Kernel​
HTML:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Hello everyone...This is my first step towards developement...I created Paradox kernel for learning and after adding many features, its time to release it to community...Paradox kernel is based on latest Lineage 14.1 sources and supports LineageOs 14.1 and all other lineage based Aosp (7.x.x) roms...My moto is to make a stable and balanced kernel having better performance as well as good battery life with usefull features
Once again, Paradox kernel is for NOUGHT ONLY (LINEAGE 14.1 and AOSP 7.X).
Features
* Based on latest lineage 14.1 sources
* Compiled using Linaro 5.4.1 toolchain
* Added cpu governores
-Impulse
-Smartmax
-lionheart
-ondemandplus
-wheatly
* Added i/o schedulors
-Sio
-Tripndroid
-zen
*Wake gestures (DT2W,S2W,Pocket Mode)
* Faux sound 3.4
* Franco Fsync control (enabled by defualt)
* KCAL colour control
* Powersuspend and LCD Notifier
* Power efficient workqueues
* Optimised crypto routines
* Push readahead to 512kB
* Optimized square root algorithm
* Lz4 compression
* Many Zram tweaks
* Disable crc check for faster performance (upto 30% increase in i/o operations)
* Blocked some wakelocks for extra battery life
* Added many tcp controllers
default : westwood
Many more features to be added...so stay tuned
Installation Instructions
Note:- If you are coming from other kernel, flash your rom before installing it(dirty flash will work too) to avoid any conflicts.
Also if you are updating to latest release of paradox kernel,you must flash your rom before flashing latest paradox kernel.
Steps to flash :-
- reboot to twrp recovery
- clean cache and dalvik cache
- flash paradox zip
- reboot
- enjoy
Downloads
For download link and changelogs have a look at post #2
Credits
@LineageOs @google @savoca @faux123 @fransiscofranco @rainforce279 @hurtsky @xda community
I am doing it as my hobby in free time...and i am asking for just one thing in return...press the thanks button...it will encourage me to make this kernel better and better.
Click to expand...
Click to collapse
XDA:DevDB Information
Paradox kernel, Kernel for the Moto E
Contributors
DarkElf
Source Code: https://github.com/Akshay7273/MotoE
Kernel Special Features: DT2W,S2W,KCAL colour control
Version Information
Status: Stable
Current Stable Version: R4
Stable Release Date: 2017-10-10
Created 2017-08-27
Last Updated 2017-10-10

Downloads + Changelogs
Downloads
Download latest release :- Paradox Kernel R4
Changelogs
*Paradox R4 10/10/17)
Merge latest lineage changes
Optimized ARM RWSEM algorithm (RWSEM implementation for ARM using atomic functions)
Lock the initial TCP window size to 64K
Optimize copy_page for modern ARM platforms
Entropy : random write wakeup thresh to 256)
Selinux : permissive
Silence some selinux logs
Older changelogs:-
*Paradox R3 (04/09/17)
Added Ondemandpus and Wheatly cpu governors
Added Conservative gpu governor
Enable lionheart cpu governor (forgot to enable in last update)
Revert KCAL commit (it was already integrated,i readded it by mistake and thus some conflicts occured...But now its fixed)
zram: set default compressor to lz4
lib/int_sqrt.c: optimize square root algorithm
init: don't force selecting debug
mm: push readahead to 512kB
proc: much faster /proc/vmstat
block: scheduler: add ZEN
USB: android: Fix memory leak in mass_storage_function_init()
sync: don't block the flusher thread waiting on IO
writeback: fix occasional slow sync
writeback: fix race that cause writeback hung
readahead: make context readahead more conservative
its not over...many other patches
*Paradox R2 (30/08/17)
Switched to Linaro 5.4.1 toolchain
Remove anykernel method and using new template zip (thanks to @rainforce279)
Added wake gestures :-
DT2W
S2W
Pocket mode for dt2w
Added KCAL colour control
Added lionheart cpu governor
Added fsync on/off support
Enable fsync by default
arm: crypto: Add optimized SHA-256/224
crypto: arm/aes update NEON AES module to latest OpenSSL version
sched: cpu_power: Add controls for sched features
sched: archpower: disabled by default
bfq-sched: Forcefully lookup entities when the cache is inconsistent
some more patches
*Paradox-R1-08/26/2017
initial release
merged latest lineage 14.1 sources
added cpu governors :- impulse,smartmax
added i/o schedulors :- sio,tripndroid
added faux sound 3.4
added powersuspend and lcd notifier
disable crc check (faster performance)
added power efficient workqueues
block some driver wakelocks
added many tcp congestion controllers
set default tcp controller to westwood

FAQ section
FAQs
[Q] This kernel works in stock rom?
NO, this kernel is based on lineage sources and works on Lineage 14.1 and all other AOSP 7.x.x roms.
[Q] Got errors during flashing/after flashing this kernel...what to do now?
Well if you are coming from any other kernel you must dirty flash your rom once to avoid any conflicts.After dirty flashing your rom flash this kernel and you won't face any problems.Also use twrp latest version (recommended)
[Q] I am having some random reboots/bugs...what to do?
Just report it with last_kmsg which is located in /proc/last_kmsg or in case of any bugs report it with logcat and proper information about how you encountered it.I will do my best to resolve it asap.
[Q] how to tweak this kernel for advanced features (like dt2w on/off,s2w on/off or changing cpu governor or i/o sechdulors) ?
Use kernel adiutor app for playing with the kernel and change the settings according to your own taste.
[Q]How to ask for any features ?
You can ask in this thread...if I find feature useful and logical then it'll be added...I would appreciate if you link me with commit. It's really hard to dig in the sources and find the exact commit.

Double tap to wake is there ??

No i have not added it yet...but i am planning to add it soon...many more features are going to be added

Update R2
Hello guyss...here comes a big update Paradox R2.Many features have been added and many things have changed to make it better.
Remember to dirty flash your rom before installing this update
*Paradox R2 (30/08/17) Download here
Changelogs -
Switched to Linaro 5.4.1 toolchain
Remove anykernel method and using new template zip (thanks to @rainforce279)
Added wake gestures :-
DT2W
S2W
Pocket mode for dt2w
Added KCAL colour control
Added lionheart cpu governor
Added fsync on/off support
Enable fsync by default
arm: crypto: Add optimized SHA-256/224
crypto: arm/aes update NEON AES module to latest OpenSSL version
sched: cpu_power: Add controls for sched features
sched: archpower: disabled by default
bfq-sched: Forcefully lookup entities when the cache is inconsistent
some more patches

after installing it my screen looks green and calibrated the colors and returns to look green

Luis Infante said:
after installing it my screen looks green and calibrated the colors and returns to look green
Click to expand...
Click to collapse
Luis actually its LiveDisplay conflicting with KCal...turn off live display from settings>> Display >> LiveDisplay ...after that display willbe normal. Thanks for trying my kernel by the way...

DarkElf said:
Luis actually its LiveDisplay conflicting with KCal...turn off live display from settings>> Display >> LiveDisplay ...after that display willbe normal. Thanks for trying my kernel by the way...
Click to expand...
Click to collapse
Ok i Will try it but i like use live display, another solution? And s2w is not working

Luis Infante said:
Ok i Will try it but i like use live display, another solution? And s2w is not working
Click to expand...
Click to collapse
Edit :- Ok guyss...i figured out the real issue...it was a tiny mistake by me and that's why when kcal colour was caliberated it automatically turned back...All is well now nd i will be updating it in an hour...this time the changelogs is gonna be huge.
S2W is working without any issues...its just disabled by default...if you want to use it then enable it first by kernel adiutor app.

Update R3
Paradox kernel R3
Download here
Remember to dirty flash your rom before installing this update (as always)
Changelogs
Added Ondemandpus and Wheatly cpu governors
Added Conservative gpu governor
Enable lionheart cpu governor (forgot to enable in last update)
Revert KCAL commit (it was already integrated,i readded it by mistake and thus some conflicts occured...But now its fixed)
zram: set default compressor to lz4
lib/int_sqrt.c: optimize square root algorithm
init: don't force selecting debug
mm: push readahead to 512kB
proc: much faster /proc/vmstat
block: scheduler: add ZEN
USB: android: Fix memory leak in mass_storage_function_init()
sync: don't block the flusher thread waiting on IO
writeback: fix occasional slow sync
writeback: fix race that cause writeback hung
readahead: make context readahead more conservative
its not over...many other patches

Nice kernel

Update R4
Yo guysss...its time for an update... I have been pretty much busy due to exams...finally its over and i'm back to developement.
This is the build for 7.x.x only...i haven't started on oreo yet...but i will do that shortly.
Paradox kernel R4
Download Here
Dirty flash you rom once before flashing as always...
Changelog
Merge latest lineage changes
Optimized ARM RWSEM algorithm (RWSEM implementation for ARM using atomic functions)
Lock the initial TCP window size to 64K
Optimize copy_page for modern ARM platforms
Entropy : random write wakeup thresh to 256)
Selinux : permissive
Silence some selinux logs

DarkElf said:
Yo guysss...its time for an update... I have been pretty much busy due to exams...finally its over and i'm back to developement.
This is the build for 7.x.x only...i haven't started on oreo yet...but i will do that shortly.
Paradox kernel R4
Download Here
Dirty flash you rom once before flashing as always...
Changelog
Merge latest lineage changes
Optimized ARM RWSEM algorithm (RWSEM implementation for ARM using atomic functions)
Lock the initial TCP window size to 64K
Optimize copy_page for modern ARM platforms
Entropy : random write wakeup thresh to 256)
Selinux : permissive
Silence some selinux logs
Click to expand...
Click to collapse
I have installed this and working fine.

sherindroid said:
Nice kernel
Click to expand...
Click to collapse
praveen139 said:
I have installed this and working fine.
Click to expand...
Click to collapse
Thanks for trying and using it mates...i'm happy my work is being used by moto e community...

Can you add FAUX SIMPLE GPU CONTROL please?

sherindroid said:
Can you add FAUX SIMPLE GPU CONTROL please?
Click to expand...
Click to collapse
Yes sure...i'll add it in next update...

DarkElf said:
Yes sure...i'll add it in next update...
Click to expand...
Click to collapse
Thanks

Viper OS + Paradox

Can anyone tell the battery life after installation of this kernal....?

[KERNEL][TW][AOSP][8.0] ArianoxxKernel G930F/935F OREO [Linux 3.18.124]

ArianoxxKernel For Samsung Galaxy S7 and S7 Edge​
Kernel for the Samsung S7 and S7 Edge on TW/AOSP based Android Oreo 8.0
PLEASE, IF YOU LIKE MY WORKS DON'T FORGET TO DONATE ON:
https://paypal.me/arianoxxdev
Disclaimer:
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
KERNEL INFORMATION
Built with: GCC 4.9 Toolchain
Kernel Base: G93XFXXS3ERI1
Ramdisk Base: G935FXXU2ERJ2
Linux Version: 3.18.124
AROMA INSTALLER OPTIONS
Install Magisk 17.1
Install Mtweaks 2.9.2
Delete Root Data
ArianoxxKernel BootSplash
FEATURES
*Based on latest ELS source
*Latest ramdisk from samsung
*Freq min GPU a 112MHz
*CPU UC for Big and Little Cluster
*GPU OC and UC 806mhz and 112mhz
*Voltage controll and CPU Undervolt
*AIK Kitchen 2.9
*-O3 Optimizations
*Many Performance and Battery optimizations
*TCP Congestion many options Westwood as default
*Updated Ondemand and Conservative governors
*Many Governorns to choose
*Schedulers many to choose cfq by default
*Mod Fake Knox 0
*Busybox 1.27.2
*SuperSu 2.82-SR4
*Magisk 16.2 & Manager 5.9.1
*Disasbled DM-Verity, Knox, RKP, Tima, Rooting Restriction
*SELinux Permissive
*Swap with LZ4 compression
*Init.d support
*IO Schedulers: noop, deadline, cfq
*CPU Governors: impulse, conservative, ondemand, interactive, performance
*Reduced wifi wakelocks
* Boeffla wakelocks blocker
*Keep 3cores of cluster1 off during stand-by
*GPU Voltage & settings
*Battery settings
*Autoreset of Secure Storage
*Enabled hidden tcp-algorithm
*CIFS and NTFS support
*SafetyNet: GREEN
*Look 2nd post to see all features
DOWNLOAD
G930F/G935F: look 2nd post
How to install:
0. Backup EFS as always!!!
1. Download the latest kernel version zip file
2. Go to recovery
3. Flash the kernel zip
4.Choose aroma selection
5.Reboot
TELEGRAM CHANNEL
https://t.me/ArianoxxDev
Post Installation
Give a bit at the kernel to settle
If u find bug, send me last_kmsg
CREDITS + THANKS
Samsung Open Source Release Center for the Source code
@osm0sis
@farovitus
@morogoku
@Tkkg1994
@Manok98
@Lukas0610
@Jole7 for testing
@IAmWolf94 for his test
@Giorgatzelos for some aroma help
@ModX81 for his moded and bootloader updater-script
@WolverineBeast a lot aroma help
Other devs that I have taken commits from which are credited in Github
XDAevDB Information
ArianoxxKernel , Kernel for the Samsung Galaxy S7 Edge
Contributors
Arianoxx
Source Code: https://github.com/ArianoxxKernel-G935F/ArianoxxKernel
Kernel Special Features:
Status: Stable
Current Stable Version: 2.1
Linux Version: 3.18.124
Stable Release Date: 2018-11-08
Created 2018-06-22
Last Updated 2018-11-08

CHANGELOG​
V2.1
*Update modem and bootloader (thanks to @ModX81)
*Rebuild aroma [thanks to @wolverineBeast]
*Update ELS base to ERI1
*Update ramdisk to ERJ2
*Update linux to 3.18.124
*Update busybox
*Defconfig: disable some log
*Update magisk to 17.1
*Fix random reboot
*Clean up code
*A lot of other optimization (check github)
*Add cpufreq_notify_utilization
*Kconfig add line
*Update gcc4.9
*Interactive: don't scale up if load is <= 6%
*Trace: exynos-ss: only dump first task to prevent flooding
*Bcmdhd: fix CONFIG_HZ dependency
*Panel: add reversible smart dimming brightness control
*Ramdisk: Patch dalvikcache_data_file
*Add support for odm
*Fully remove knox
*Fix ramdisk script issue
*Defconfig: disable some tracers
*Defconfig: disable integrity check
*Cpufreq: interactive: don't scale up if load is <= 6%, it's not worth it
*Mobicore: reduce kernel log output
*Defconfig: disable profiling
*Fix adb
V2.0
*Everything is changed
V1.3
*Private mod fix
*Performance optimazion (see GitHub)
*Battery optimization (see GitHub)
*Switched to custom TC
*Rebased
*Try to fix sdcardfs
*Disable zram by default
*Disable secure_camera (thanks to @twy2004)
*Update wakeclock blocker
*Update mtweaks to 2.9.2
*Update ramsik to ERF4
*Ramdisk: fix recovery issue
*ArianoxxKernel spashscreen in aroma
*Ipv4: Disable KNOX
*Dts: Increase charge levels
*Ipv4: set initial TCP window size to 64K (speed improvement)
*Cpufreq: Add cpufreq_notify_utilization
V1.2
*Updated aroma
*Performance optimazion (see GitHub)
*Battery optimization (see GitHub)
*Some new wakeclock blocked
*Update magisk
*Update source to G935FXXU2EREM
V1.1
*Add arch_power support
*Performance optimazion (see GitHub)
*Battery optimization (see GitHub)
*Media kill process
*Improve wakeclock blocker power
*Reduced sleep time
V1.0
*Based on latest ELS source
*Sources ramdisk EREM
*Freq min GPU a 112MHz
*CPU UC for Big and Little Cluster
*GPU OC and UC 806mhz and 112mhz
*Voltage controll and CPU Undervolt
*AIK Kitchen 2.9
*-O3 Optimizations
*Many Performance and Battery optimizations
*TCP Congestion many options Westwood as default
*Cpufreq: cache tunables for ondemand and conservative governors
*Many Governorns to choose
*Schedulers many to choose cfq by default
*Mod Fake Knox 0
*Busybox 1.27.2
*Magisk 16.2 & Manager 5.9.1
*Disasbled DM-Verity, Knox, RKP, Tima, Rooting Restriction
*SELinux Permissive
*LZ4 compression and support
*Init.d support
*Sensorhub wakelock: reduced to 50%
*Scripts: Remove DIRTY status from Kernel
*IO Schedulers: noop, deadline, cfq, zen
*CPU Governors: impulse, conservative, ondemand, interactive, performance
*Reduced wifi wakelocks
*Boeffla wakelocks blocker
*Keep 3cores of cluster1 off during stand-by
*GPU Voltage & settings
*Some defconfig optimization
*Battery settings
*Drivers: Add state notifier driver
*Binder: set binder_debug_mask=0 to suppress logging
*Autoreset of Secure Storage
*Enabled hidden tcp-algorithm
*Crc configurable and disabled by default
*Max77854: Fade Led
*CIFS and NTFS support
*SafetyNet: GREEN
DOWNLOAD:
TW: https://www.androidfilehost.com/?fid=11410963190603842350
AOSP (not up to date): https://www.androidfilehost.com/?fid=1322778262903996316

MOD EDIT: Don't quote the entire OP
Inviato dal mio SM-N950F utilizzando Tapatalk

Many thanks bro awesome work best are yet to come 5 stars from me

Thanx mate, downloading....

Hi i dont see wakelocks blocker its disable by default?

THX mate. On time no Problems. :good: Tomorrow i can tell more.
servus
Sent from my S7 Edge using XDA Labs

Héhé ! A new challenger ! Great ! Look awesome ! Will give a **** and report ... Thanks for your time on this hardware
Sent from my [device_name] using XDA-Developers Legacy app

Grate kernel but some problem this kernel but system many time boot. Please fix.

Which governor is better for battery life?

Randhir Kumar Yadav said:
Grate kernel but some problem this kernel but system many time boot. Please fix.
Click to expand...
Click to collapse
Do u touched something in mtweaks? Anyway send me last_ksmg

ako9 said:
Which governor is better for battery life?
Click to expand...
Click to collapse
Keep interactive

I am not select mtweks.
---------- Post added at 07:19 PM ---------- Previous post was at 07:09 PM ----------
francitato02 said:
Do u touched something in mtweaks? Anyway send me last_ksmg
Click to expand...
Click to collapse
No sar.i install this kernal for sac23 rom for s7 edge. I do not select Mtweks.

Thank you dev for your work. Can anyone tell me if still persist the Standby Cell battery drain with this Kernel? I don't update to Oreo my S7 edge, because all rom that I've tryed had the battery drains for standby cell ... but I hope with this kernel the situation can change. Thank again.

Thanks bud ?? giving it a try now

Tx so much for keeping our device alive

FD?

Best kernel now! Starting 1 cycle and i see batery life will be nice

Dual sim supported?

Great Kernel. Batterydrain ist less. Best Kernel on time for O :good:
Sent from my S7 Edge using XDA Labs

[Kernel]Dragonfly Kernel (miui, aosp)

Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Flash zip
Flash Magisk 19.3
enjoy
If you have MIUI, or firmware based on its vendor, install the version of stock-vendor. If custom firmware, then new-vendor.
The github sources from which build the kernel binaries - https://github.com/mylove90/android_kernel_xiaomi_onc
Contact creator in telegram - @igaryasha94 (dont pm without reason)
Official Dragonfly Kernel | Eng - https://t.me/dragonflyenglish
Official Dragonfly Kerlen | Ru - https://t.me/dfkerneldl
Download: https://mega.nz/#F!DklB3SAB!4SMsSxvJHicKqfhp2bzSDA
Bugs:
V1.7 - dont work video on MIUI (20.12.19)
XDA:DevDB Information
Dragonfly Kernel, Kernel for the Xiaomi Redmi 7
Contributors
igaryasha94
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.7
Created 2019-12-19
Last Updated 2019-12-20

Code:
20 December :
- Work with compressed RAM is improved.
- BFQ Disk Scheduler is tweaked for smoothness and is set by default.
- Returned smooth multitasking to CFS.
16 December :
- New I/O scheduler DynOPS (dynamic FIOPS), which adapts to the current load and tries to provide better system
responsiveness
- The minimal bus frequency is increased, this should take us closer to Zeus in audio quality
- Rebalanced governor Smartutil tunables
- Dynamic fsync removed from the kernel
12 December :
- Clang and Google GCC kernel build tools have been updated, a kernel built using newer versions is faster and more stable
- TCP congestion (TCP congestion control): BBR by default
- On file systems, when mounted by default, the noatime flag (without remembering access time)
- Fixed bug with expire default settings in the BFQ I / O scheduler (both were at zeros)
- Smartutil: Turbo is now considered separately for each processor core
- Turbo default settings improved
- I / O schedulers are included in the kernel: FIOPS, BFQ, Maple, Anxiety, Zen
- USB charge acceleration is now active by default
- (thanks ragy365, Zeus kernel author) Overclocking a digital audio processor (DAC) to 12 MHz.
- (thanks ragy365, the author of the Zeus kernel) The device bus frequency is clocked up to 24 KHz.
- Improved CFS process scheduler options to increase responsiveness
- The FIOPS I / O Scheduler has improved default settings for maximum smoothness.
- FIOPS is set as the default I / O scheduler.
5 December :
- Full rebalance of Turbo mode. The frequency of 2 GHz is turned on on two CPU clusters in different ways. On a small cluster it is very rare, only with prolonged continuous load. On the big opposite, a little more often than before. This allowed the smartphone to slow down even below the drain core bar.
- Improved I / O scheduler BFQ settings for better smoothness
- Ability to disable SELinux by writing units to the file / sys / fs / selinux / disable
1 December :
- I went through the source code, cleaned it from harmful changes. Now everything should be stable and without problems.
- Changed the base for the CPU governor Smartutil, from pixel_smurfutil to schedutil.
28 November :
- WiFi now works as expected, if you select the correct version (below)
- Two versions for different vendor
- Turbo: improved balance
- You can customize Turbo mode to your liking
- I / O scheduler changed from BFQ to Anxiety

I really appreciate your work.
Thank you for continuing redmi 7 development

work in stock rom miui 11?

arbercocka said:
work in stock rom miui 11?
Click to expand...
Click to collapse
yup

If you want use vendor by mashkoukras, then just flash stock-vendor zip

Sir how do we enable and customise turbo mode?

Only gobernor... Why?

Mega Link not working