Hi,
Anyone knows the Pi zero w ver. 1.1 back pads?
Here is my photo
Cheers
Related
Hello
sorry for my English
I have a problem with my camera back, it does not start automatically
I have to start BEFORE CAM application and then select view back.
I want what launches automatically when I go walking back.
park assist function does not work and display the rule for parking does not work.
Help me please
Number model: S07
Versio MCU: MTCB KLD2 V2.77 aug 26 2015
Version android: 4.4.4 10082015
Kernel version 3.0.36+ @ chun roo-book # 817
Build Number: RK3188 eng 4.4.4 10082015
CPU: 1.6 GHz armv7 (X4)
Memory: 1024 MB
ango81 said:
Hello
sorry for my English
I have a problem with my camera back, it does not start automatically
I have to start BEFORE CAM application and then select view back.
I want what launches automatically when I go walking back.
park assist function does not work and display the rule for parking does not work.
Help me please
Number model: S07
Versio MCU: MTCB KLD2 V2.77 aug 26 2015
Version android: 4.4.4 10082015
Kernel version 3.0.36+ @ chun roo-book # 817
Build Number: RK3188 eng 4.4.4 10082015
CPU: 1.6 GHz armv7 (X4)
Memory: 1024 MB
Click to expand...
Click to collapse
There's an orange cable with a black stripe in your loom. It's normally marked reverse. This cable is the trigger to activate
reverse camera input. It should get +12 volt when you put your gear in reverse, from a specific reverse cable in your car. If you don't
have a specific reverse cable under your dash, then you must use +12 volt from your white back light and route a wire from the lamp
to your headunit. You must also connect your camera to the yellow RCA female connector marked cam in.
Finally you must activate park assist in settings/driving settings, and also rear view ruler.
I have a Fiat Bravo 2 and I do not have orange wire.
while the wire are connected
the camera is displayed correctly when I pass reverse as long as I run the cam application. before
me I want everything to be automatic
Thank you.
ango81 said:
I have a Fiat Bravo 2 and I do not have orange wire.
while the wire are connected
the camera is displayed correctly when I pass reverse as long as I run the cam application. before
me I want everything to be automatic
Thank you.
Click to expand...
Click to collapse
If you have a head-unit like in this thread you do have an orange/black wire named reverse.
Hello
it works perfectly.
thank you
Hi guys! , I saw on youtube and on vibell.org, a solution for a raspberry pi based smart doorbell.
Currently, i own the first raspberry pi (RASPBERRY P1 MODEL B), a usb 2.0 camera, a breadboard, some buttons and leds.
I wan't to do the project has shown on this video: https://www.youtube.com/watch?v=SRZ6QxxXRdI , the thing is that this project is made with the raspberry pi camera module (that i don't own), and i want to use a usb 2.0 camera instead, in this project he also uses a usb sound card that i don't understand why, i would want do replace that usb sound card with the soldered one on the raspberry pi
But i don't know how
I'm a beginner with the raspberry pi and programming.
Hope you can help me !
By the way the site is : vibell.org
Waiting for answer!
Luís
Very new to this whole raspberry pi thing.
Long story short, I recently bought a pi zero w and manage to install pi-hole and config my home network to go through it when I browse the net.
This got me very excited so I start looking into more pi projects.
The next thing I want to do is try to install Android TV box into the same raspberry pi. I was wondering if the zero w is powerful enough to run both pi hole and android at the same time or do I need to order another one?
If it is powerful enough, I am currently running Pi Hole off Raspbian, is it possible/how to run both at the same time?
I found a few guides on how to install android tv but cant get my head around running both at the same time.
Thanks:good:
I've been playing with the GoldenOrb ROOter for Raspberry Pi 3. I want to use the 4 USB ports as WANs and load balance the WANs. I'm currently using the Raspberry Pi 3 B board because the latest build doesn't support the B+. Does anyone have or know of a build being available that will work on the Raspberry Pi 3 B+? It doesn't have to be GoldenOrb but that seems to be by far what is the closest to having what all in there I need to use. I may have to end up doing my own build for this but due to time constraints can't really get around to it at the moment. Any suggestions would be appreciated. I am connecting Netgear AirCard 815S hotspots to the USB. But, the phones I've tried have been recognized right away as well. Also, current build I have been able to load balance 2 of them. The modem section by default has set up for 2 modems and I have 2 of the AC815S hotspots connected and load balancing but would like to utilize the other two USB ports for modems as well. This may all sound very easy but I'm just getting into this project. I'm surprised no one has made a publicly available build yet for the B+ model. I'm running into roadblocks with max speed of the 10/100 Ethernet port on the B model
I need help have some version ported to raspberry pi 3 b +? I can not find out if there is any project with Android? Or can someone make a version for raspberry pi 3 b +?
I am trying to do the same thing with "Raspberry 3 B";
Try "Emteria OS" it works the same with "Raspberry 3 B+", half a year it have problems with Bluetooth on the "3 B+", but maybe the fix the bugs.