My Oneplus 3T(with android 8.0.0) suddenly turn off and it wouldn't boot or other option, i didn't ever rooted, it was new and updated. I tried to go to recovery, tried a hard boot hold the power button for 30s, connected to pc, and giving a charge... it just stayed dead... so i did a find the OnePlus3 Unbrick Tool, did find the phone on the tool and i run... after that it boot in a cycle where appear the 1+ logo and them the md5 checksum with the system and recovery failedmd5 failed
it does that loop, and now i can enter fastboot but can do nothing than going to that cycle and power off
phone apear in the device manager as "Qualcomm HS-USB QDLoader 9008(COM3)"
and using the tool again, goes to a error saying "Sahara Communication Failed£ Please try again after power off phone" and already tried what it said..
then i tried the version 3.0.8 of msm-download-tool and got the error "Firehose GetUfsInfo Failed" and got the LED yellow...
please help me, what can i do to boot my devide?
Maveric2 said:
My Oneplus 3T(with android 8.0.0) suddenly turn off and it wouldn't boot or other option, i didn't ever rooted, it was new and updated. I tried to go to recovery, tried a hard boot hold the power button for 30s, connected to pc, and giving a charge... it just stayed dead... so i did a find the OnePlus3 Unbrick Tool, did find the phone on the tool and i run... after that it boot in a cycle where appear the 1+ logo and them the md5 checksum with the system and recovery failedmd5 failed
it does that loop, and now i can enter fastboot but can do nothing than going to that cycle and power off
phone apear in the device manager as "Qualcomm HS-USB QDLoader 9008(COM3)"
and using the tool again, goes to a error saying "Sahara Communication Failed£ Please try again after power off phone" and already tried what it said..
then i tried the version 3.0.8 of msm-download-tool and got the error "Firehose GetUfsInfo Failed" and got the LED yellow...
please help me, what can i do to boot my devide?
Click to expand...
Click to collapse
When comes error "Sahara Communication Failed" after that hold and press volume up with power button simultaneously , it will start again. Hope it should work.
Related
Hi I was trying to install cwm recovery on my motorola atrix hd using myth tools phone was connected normally so I choosed the flash recovery option and after few secs it restarted my phone and now it's stuck on start screen saying :
AP Fastboot Flash Mode S
10.98* sha etc 2012-11-17 23:33:08
emmc info: size8gb
device is locked status code:0
battery ok
connect usb data cable / and when I plug in usb cable it says usb connected
fastboot reason: flash failure
every time I turn it on it goes straight to this screen and if I try pressing volume up + power then it goes to a screen with dead android icon :laugh:
what did I do wrong ? and how to get it back to normal please help me ... I tried running myth tools again and choose normal boot / unlock bootloader but they get stuck at demon started successfuly :silly:
okay solved it pressed 3 buttons once at all and it booted normally, but it still says flash failure when I try flash cwm recovery and it reboots to Fastboot screen... Please help.
solved it.. thread can be closed down now...
Hello,
I was running CM13 and tried to install the most recently nightly (1121) I believe. Mi5 shutdown to reboot and install but never turned back on. The screen stays blank no matter what button combination I use. When i boot up holding Vol+ and power, it is visible as a drive and I can browse the file system from my computer.
I have tried various unbrick methods with no success.
I have tried to flash the Chinese Dev rom and Global using XiaoMiFlash but i get an error (can not found file flash_all.bat)
I have tried recovering with PC Suite - but i get various errors saying it can't connect.
Doesn't recognize when i reboot in recovery mode (Vol+ and Power)
Says to connect in normal mode first when i reboot it fastboot mode (Vol- and Power)
(also tried Chinese version, but I cant read the errors.
Fastboot devices shows it connected. Is there another way to unbrick? I have read a bit about EDL method but see other people saying it permabricked phone so I am nervous to try. Any idea?
OK so typing fastboot oem edl changes it - now shows up as RELINK HS-USB QDLoader 9008 (COM3) in device manager - but when i try to flash with XiaomiFlash I get a new error: cannot found programmer file. ugh.
Edit - also getting: cannot read from port COM3 (after first saying "read hello packet")
Apprently all versions of MiFlash arent the same - used the guide (and the version of MiFlash linked in this post) and it is booting now:
http://forum.xda-developers.com/mi-5/help/flash-rom-miflash-bricked-mi5-t3494738
This is the only unbrick method that worked for me
EDIT: I got to fastboot mode finally, just by trying different USB cable... (am I dumb? yes. really.) I'm sorry for wasting everyone's time that tried to help me!
I tried to install xposed via TWRP, and after that I got stuck in a bootloop, then I tried to install something in panic in twrp in order to fix my phone, and then when I was about to boot, it said "No OS installed are you sure you want to reboot?" I tapped Yes. Now I can't access my recovery mode anymore.
I haven't installed fastboot on my phone or whatever (dont know does it have to be installed to get access to it) but when I try the button combination I'm not accessing the fastboot mode.
I'm stuck in a screen where it says 'Your device has been unlocked and can't be trusted" and in the bottom is says "Your device is booting now..." and does nothing.
Please I really need help, I paid for my phone 300 euros and have had it only like month... also i'm addicted to pokemon go and my p9-lite is the only device I could play it with, and my family isn't the richest one and I can't buy a new one in like a year
)
To access fastboot mode. Make sure the phone is off. Press and hold vol down and insert USB cable. That should bring you to fastboot mode.
n0my said:
To access fastboot mode. Make sure the phone is off. Press and hold vol down and insert USB cable. That should bring you to fastboot mode.
Click to expand...
Click to collapse
not working, just brings me to the same screen where it says "your device has been unlocked and can't be trusted"
what about 3 button combination???
Hold vol- ;vol+ and power button, when huawei logo appers realise power button.
Sugestion. Dont mess with TWRP and zips if u dont know what are u installing.
P.S. DC phoenix can fix your phone, but it cost 15 EUR and u should be able to acced fastboot.
Sent from my EVA-L19 using XDA-Developers mobile app
the 3 button combination doesn't work either.. also DC phoenix won't put me in fastboot right? as I've searched online about it.
And I won't mess with twrp ever again when I get my phone back.
Karibu0 said:
not working, just brings me to the same screen where it says "your device has been unlocked and can't be trusted"
Click to expand...
Click to collapse
connect cable with pc, then connect with phone, only then press volume down and powerbutton about 15 sec, so phone force restart, keep holding vol down. need to be in fastboot mode, if are not ,then its done for you!
Arnys said:
connect cable with pc, then connect with phone, only then press volume down and powerbutton about 15 sec, so phone force restart, keep holding vol down. need to be in fastboot mode, if are not ,then its done for you!
Click to expand...
Click to collapse
well...... I guess my phone is 'done' then
Is there any other ways to install the firmware than fastboot? like some kind of tool on pc so it forces the install and your phone doesn't have to be in fastboot or anything?
Finally got to fastboot mode, just by trying different USB cable... (am I dumb? yes.) I'm sorry for wasting everybody's time!
I'm never gonna do any modding to my phone ever again
Hi, I have a problem with my p9 too. I can't access fastboot or recovery mode. The phone stays on black screen, no led. When i pluged it on usb, he is detected but as "USB SER". How can i do to reflash ?
My P9 have problem who help me......plssss
1A) Accidentally relocked the BL while on custom recovery and rom. Bricked, only turns on to blank black screen w/ solid blue LED.
1B) Able to go QFil Q9008 mode but all attempts result in errors, mostly Saharas. Unable to get into Fastboot
2A) Out of nowhere, days later. From OFF state, Vol+ and Vol- and plug I get the initial screen to scroll to select Reboot, Recovery, Fastboot, Reboot options.
2B) Was able to get into Fastboot and recognized by All-In-One Tool by Mauronofrio but I could not unlock the BL because I could not get a successful unlock file download.
2C) Also was able to get into EDL and what looked like my first successful download/flash in QFil 9008 mode. All previous attempts For the first time I saw progress bars and it was complete, okay/closed.
3A) Nothing happened for a long time so I unplugged and power cycle. Now its still bricked but in a different way. Button combos yield a quick vibration, green LED flicker once, back to all black screen, over and over.
3B) I am assuming I am in a worst brick than before? Now I am unable to get into Fastboot, EDL, computer doesn't even prompt driver issue when its off. Where now?
Hi,
I had the q9008 issue too after flashing the ZUI ROM with QFIL.
Phone turned off itself and then, nothing but a vibration after 15s on power button, and PC recognized it as Q9008 port. No screen, no LED.
I tried to plug it to PC after battery died, and had the red LED. Tried to charge it, and it went alive again. Now it's on AEX and everything is fine.
You can try that way, or follow this guide (I would do that if it would not be alive):
https://redirect.viglink.com/?forma...ww.zukfans.it/2016/07/06/gui...terminali-zuk/
Hi, same problem here.
Did you solve it? How?
Hi guys,
I bought the phone from ebay as they said it was stuck in fastboot mode after an OTA update, and having unlocked and played around with custom roms on several other phones I thought "No problem".
However, this is a problem. The phone is not stuck in fastboot mode, and I cannot get the phone to boot into fastboot mode. It is not seen by my computer
On turning on, it shows the Huawei Logo and then shows the message that the phone is unlocked and cannot be trusted and I should visit:
http://zh.ui.vmail.com/emotiondownload.php?mod=restore
If I hold down vol down + power it says 'Your device is booting now' but nothing happens.
Pressing power, or vol up + power, or just the power button, or leaving it then boots to mr green android with the message:
Attention! Please update system again
Error
Func No: 11 (recovery image)
Error No : 2 (load failed)
I have tried:
Booting into fastboot mode via vol down + power
DC Phoenix (as mentioned here: https://forum.xda-developers.com/showthread.php?t=3759988)
This > https://forum.xda-developers.com/p10/help/tutorial-recovering-p10-p10-brick-t3600211
This> https://androidforums.com/threads/unlocked-p9-lite-stuck-at-boot.1225280/
I do not know if the bootloader is unlocked.
Also, it won't turn on at all if it is not plugged in so doesn't seem to be holding charge or battery information. It boots automatically once it's been charging for a couple of minutes,
Help much appreciated!
UPDATE - I can now get into fastboot mode. I sat with my finger on the vol down button until it gained enough power to turn on.
Phone is unlocked
FRP Unlock
UPDATE
I ran the DC Phoenix update and half-way through the phone turned off and now won't turn on again. It doesn't look as if it's even charging anymore. (as per this thread: https://forum.dc-unlocker.com/forum...-plus-not-powering-or-charging-after-flashing)
Marvellous. I'll continue to investigate. If anyone has any ideas, please let me know,
Any news here? Same issue on my device. Unfortunately I can't get into fastboot, I only see:
Attention! Please update system again
Error Mode
Func No: 11 (recovery image)
Error No : 2 (load failed)
It's not even recognised via USB. Maybe the phone still thinks it has to make the low level format after unlocking the bootloader, but can't start any of the recovery.
This is my most expensive brick so far...
On my phone I tried to revert to stock recovery within TWRP and flashed the recovery.img to recovery partition.
After doing this, recovery wasn't working and I unlocked the bootloader. Since that moment I cannot get into fastboot.
Attention! Please update system again
Error
Func No: 11 (recovery image)
Error No : 2 (load failed)
Man I have the same problem. Sorry I'm a beginner and I can't help you. I wanted to ask if you have some tips.
I have that error if I try to enter in TWPR but I can boot in eRecovery and the smartphone turns on and works normally.
I tried to reset by eRecovey but error occurs just the same.
What can I do?