1A) Accidentally relocked the BL while on custom recovery and rom. Bricked, only turns on to blank black screen w/ solid blue LED.
1B) Able to go QFil Q9008 mode but all attempts result in errors, mostly Saharas. Unable to get into Fastboot
2A) Out of nowhere, days later. From OFF state, Vol+ and Vol- and plug I get the initial screen to scroll to select Reboot, Recovery, Fastboot, Reboot options.
2B) Was able to get into Fastboot and recognized by All-In-One Tool by Mauronofrio but I could not unlock the BL because I could not get a successful unlock file download.
2C) Also was able to get into EDL and what looked like my first successful download/flash in QFil 9008 mode. All previous attempts For the first time I saw progress bars and it was complete, okay/closed.
3A) Nothing happened for a long time so I unplugged and power cycle. Now its still bricked but in a different way. Button combos yield a quick vibration, green LED flicker once, back to all black screen, over and over.
3B) I am assuming I am in a worst brick than before? Now I am unable to get into Fastboot, EDL, computer doesn't even prompt driver issue when its off. Where now?
Hi,
I had the q9008 issue too after flashing the ZUI ROM with QFIL.
Phone turned off itself and then, nothing but a vibration after 15s on power button, and PC recognized it as Q9008 port. No screen, no LED.
I tried to plug it to PC after battery died, and had the red LED. Tried to charge it, and it went alive again. Now it's on AEX and everything is fine.
You can try that way, or follow this guide (I would do that if it would not be alive):
https://redirect.viglink.com/?forma...ww.zukfans.it/2016/07/06/gui...terminali-zuk/
Hi, same problem here.
Did you solve it? How?
Related
Hello.
I`m new to this development world, so i`ll try to describe what i did(P7-L10, EMUI 3.0):
1. I rooted the phonewith RootGenius, RootChecker confirmed.
2. I tried to unlock the bootloader with "EZ UNLOCkER", the status remained unknown, but it said(in the middle of the screen, small note) that the "device is now unloced" or something like that.
3. Then I tried to enter recovery mode (switched the device off, then pushed volume up, volume down and power button together, but it didn`t even show the Huawei logo or vibrate, the only thing it did: it blinked its led: red, green, green, red, green, green etc.)
What have I done and how can i get it back working?
Best wishes,
Uku.
Well, didn't you bother that EZ unlock is for Galaxy S3 phone???
You have bricked your device. Bring it to service. I presume, they will offer replace of system board, I hope warranty is not over yet? Otherwise the repair price will be comparable to device cost.
oh well, thank you. Took it to warranty and told them i have no idea what happened (update failed ors.) They accepted it even though there was crack on the back side. Lets see
Its not briked..
Try to put it via USB cable on a PC. Then wait......after 15min disconnect it. Then try to bring it up into fastboot mode and flash bootloader.img via fastboot.
87insane said:
Its not briked..
Try to put it via USB cable on a PC. Then wait......after 15min disconnect it. Then try to bring it up into fastboot mode and flash bootloader.img via fastboot.
Click to expand...
Click to collapse
It won't help.
It would...i had the same after an failed flash.
In case of boot image, yes it would, but not in case of other. But I doubt very much that EZ lock touches boot.
He can try it... Better than a new phone. I dont know what EZ does in detail. But if he can put the phone on, he can reflash it and all will be good. If not and the phone still not show anything - bye bye p7.
Hello there. Me was given a Razr i XT890. If i turn on there only the "Warning Bootloader unlocked". I try to get in Fastboot mode or any other mode but i only stuck in this window or nothing. I dont even get a Batterylogo if i load with the wall charger. I put it on my PC but nothing happens. No new Device. No ADB. Nothing. Can i rescue the phone or is it only a paperweight?
Most likely a brick. U could try to do something with the xfstk flasher. Search it up, get the right files and hope it works
It's recoverable!
Gindler said:
Hello there. Me was given a Razr i XT890. If i turn on there only the "Warning Bootloader unlocked". I try to get in Fastboot mode or any other mode but i only stuck in this window or nothing. I dont even get a Batterylogo if i load with the wall charger. I put it on my PC but nothing happens. No new Device. No ADB. Nothing. Can i rescue the phone or is it only a paperweight?
Click to expand...
Click to collapse
The first thing you should do is to see this video (https://www.youtube.com/watch?v=OTzaiwj-bGw) to install libusb on your computer (if you are using Win 8 or 10 you will need to remove the signing imposition on driver installation - search for it).
The second action is to download the programs provided in this other topic of the community:
Download -> https://forum.xda-developers.com/attachment.php?attachmentid=1795067&d=1362945847
Topic Forum - >https://forum.xda-developers.com/showthread.php?t=2184877
Then follow the instructions:
1 - With the cellphone turned off, connect it to the pc by the USB cable holding the camera button, when vibrate, release. (The green light should be on).
2 - Run xFSTK-SoC-Driver-Setup-1.0.3.exe and follow the instructions. (Your cellphone will probably turn on and will be locked on the bootloader unlock warning screen).
3 - If the phone has turned on, it will remain locked, then press and hold the camera buttons + volume down + power button. (It should vibrate, then release the buttons, if all goes well it will turn green).
4 - Run the unbrick.bat, when you start the prompt keep holding down the volume button of your cell phone. (If all goes well it will restart, continue with the down volume button pressed, when on it should enter fastboot mode.
If you get here and he gets into fastboot mode, CONGRATULATIONS you got it. Now just install the rom via RSD Lite. (Look up if you do not know)
Remember that your cell phone must have the bootloader unlocked for installation of the factory rom.
I do not guarantee origin, be aware that it is at your own risk
I hope I have helped!
Great! People from everywhere thanks you a lot.
brun0_csa said:
It's recoverable!
The first thing you should do is to see this video (
) to install libusb on your computer (if you are using Win 8 or 10 you will need to remove the signing imposition on driver installation - search for it).
The second action is to download the programs provided in this other topic of the community:
Download -> https://forum.xda-developers.com/attachment.php?attachmentid=1795067&d=1362945847
Topic Forum - >https://forum.xda-developers.com/showthread.php?t=2184877
Then follow the instructions:
1 - With the cellphone turned off, connect it to the pc by the USB cable holding the camera button, when vibrate, release. (The green light should be on).
2 - Run xFSTK-SoC-Driver-Setup-1.0.3.exe and follow the instructions. (Your cellphone will probably turn on and will be locked on the bootloader unlock warning screen).
3 - If the phone has turned on, it will remain locked, then press and hold the camera buttons + volume down + power button. (It should vibrate, then release the buttons, if all goes well it will turn green).
4 - Run the unbrick.bat, when you start the prompt keep holding down the volume button of your cell phone. (If all goes well it will restart, continue with the down volume button pressed, when on it should enter fastboot mode.
If you get here and he gets into fastboot mode, CONGRATULATIONS you got it. Now just install the rom via RSD Lite. (Look up if you do not know)
Remember that your cell phone must have the bootloader unlocked for installation of the factory rom.
I do not guarantee origin, be aware that it is at your own risk
I hope I have helped!
Click to expand...
Click to collapse
Hey, Bruno! You prolly don't open this forum anymore, but I'm trying to unbrick a moto razri that has this exact problem. I'm trying to follow the steps you sent, but it's pretty confusing, since some of these files are from 2009 or from some other windows like XP, Vista, or 7, and I'm trying to do all of this on my Windows 10 machine. Can you please try to update these steps? Thanks!
Hello,
i think I've broken my phone, I hope you can help me.
I followed this tutorial that you can download here : (I can't post the link because I'm a new user)
I've tried to unlock the boot loader with success, then the installer tried to install a recovery (as the text in the command window said) and the progress stopped, I have waited a couple of minutes but nothing happend and I disconected the phone from my computer (I know that was a bad idea).
Know my phone won't start, not even in the recovery mode. I can hold the Vol +, Vol - button and the power button but only the huawei logo appears, then turns the screen black and nothing more happens. I have also disconnected the battery for some minutes but this didn't change anything.
The only positiv thing is, that Fastboot still recognizes the phone when it's connected to my PC, but I still can't enter the fastboot mode.
I hope you can help me and save my phone,
thankfull Robin
Flash twrp in it, and than install persona's B602 rom.
D1stRU3T0R said:
Flash twrp in it, and than install persona's B602 rom.
Click to expand...
Click to collapse
First of all thank you for your reply. But I can't put my phone with my computer and minimal ADB in fastboot mode. The device is found with the command "adb devices" but it has only recovery status. When I type in "adb reboot bootloader" then Huawei logo flashes up and then it goes back to blackscreen.
I fixed it
I fixed the phone by myself. I'm not an expert at all and this is for the people with the same problem.
I think the problem was, that the phone won't leave the recovery mode, because it was listed with "apd devices" as "recovery" for the whole time.
So I tried to install a stock ROM via SD Card with a tool named au_temp.cfg and the phone actually did more then just turning back off when i pressed the Vol+, Vol- and Power key. So the phone actually entered the bootloader but I got the wrong stock image, but this didn't mattered because after one try the phone got back to normal mode and booted quite fine. So I think the main problem was, that my phone was stuck in a recovery mode and needed help to exit it.
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Obi_Wlan said:
You might want to take a look at this.
[GUIDE]How to reboot to EDL from fastboot
Most Qualcomm-based Android PDAs support emergency download (EDL) mode allowing to unbrick device, unlock bootloader or modify protected device parameters. If ADB interface is accessible, "adb reboot edl" can be used to reboot to EDL mode. Many...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank but phone simply dont booting to fastboot mode.
Durien Daragoth said:
Thank but phone simply dont booting to fastboot mode.
Click to expand...
Click to collapse
You have to experiment with some button combinations. I ran into the same problem with a different phone two years ago. Read everything about this even if fastboot isn't working right now.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Service centre will be your best bet
Durien Daragoth said:
Hi i just oficialy unlocked bootloader, flashed twrp recovery boot and restarted phone. After that restart, phone got stuck in loop rebooting to MI logo. Recovery and Fastboot not loading when i press right buttons. Phone just vibrate and keep restarting. I had to dry off battery to turn it off becouse when i connect phone to cable it auto turn on and start restarting. I tryed also unplug battery and flash it by other rom but connection with pc is broken when phone still restarting every 5s. Is there any chance to save this phone from scrap? Thank you
Click to expand...
Click to collapse
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Player__y said:
first let's go, download the fastboot stock version of the ROM then download Miflash, unzip the rom on your main disk twice, now on your cell phone you will press the power off button and at the same time the fastboot button (you must have messed up the file boot so it doesn't turn on) and play Miflash also on C disk, open Miflash on mobile in fastboot mode and select ROM folder don't forget to put the option to just clean and not lock, when the process is finished you wait for the phone to turn on
Click to expand...
Click to collapse
If you have any, let me know on discord, 𝑃𝑙𝑎𝑦𝑒𝑟#2028
Thx but phone dont booting to fastboot mode so i cant flash boot.img i tryed now SP Flash too in linux and still same errors becouse phone disconecting too fast. I think technician service will be solution..
Dont use The daanm Sp flash Tool , Its for mediatek devices, USE Miflash, and Its impossible a phone dont boot in fastboot mode, try again, pls hold The button
I have both Mi flash and SP flash tool
Without fastboot you cant do much...
in Miflash it dont do anything even device it dont see on COM3
in SP flash too it react but with errors becouse of disconecting
phone dont boot right becouse both A and B boot images are corrupted.
Does your screen at boot turn red? I've done everything on my cell phone, several things have happened to me and not once did fastboot have a problem, because fastboot is a totally different place to boot, there is only this possibility if you used commands in adb to remove or do something in fastboot that made it useless, it's impossible to happen this in the way you said
yes i did adb commands in fastboot becouse i instaled recovery and this all happend after reboot
no problem doing things in adb, I said in the sense that you deleted fastboot in adb but that didn't happen by the way you said
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Obi_Wlan said:
Turn off your phone.
Press and hold the Power + Volume Down buttons together and immediately connect the device to the PC. You need to time it perfectly.
It will automatically boot into EDL mode, and LED lights may blink.
Download QPST Flash Tool and install your device's firmware using QFIL(comes included in QPST).
I suggest you to read everything about it online.
Click to expand...
Click to collapse
I tryed but not succes. It just booting every 5s nowhere. Cant get to EDL mode sorry. And correct turn off phone isnt possible i have to unplug battery flex cable but i also tryed. Only possible state where it dont restarting is when battery is unpluged and i connect phone on cable with pc and pressing volume down+power. But connection to COM3 is only 2s.
Well, in that case you need to short the test points on your motherboard and plug the phone into your PC at the same time.
Watch several videos related to it on YouTube first.
Wait, is your phone Redmi Note 11 or 11s?
I will try the point test. I have Redmin Note 11s.
Ahhhh...you posted it on Note 11 forum.
Can't help you mate. Things are more complicated in mediatek devices.
Still, this thread might help a little. Good luck.
(Guide) How to fix a hard bricked Redmi Note 9 (Merlin) (Hard Brick)
A how-to guide of restoring a completely bricked Redmi Note 9 Hi, In this guide, I will teach you how to fix a hard-bricked Redmi Note 9 (merlin) and bring it back to its original state. How does a hard-bricked Redmi Note 9 look like? it's stuck...
forum.xda-developers.com
Now i have bit progress with python im able to hold COM3 port connection around 60s. But when i start SP Flash Tool it will always make error. STATUS_BROM_CMD_STARTCMD_FAIL (0xC0060001) and STATUS_ERR (0xC0010001) , STATUS_BROM_CMD_FAIL
I finally managed to connect device for longer time cca 1 min with MTKMETAUtilityV49 and it helped me also disable auhorized connection for SP Flash tool V5. By this i formated whole disc except bootloader. Now phone dont self restarting so it is prepared for instal fresh rom. I think this will be again problem becouse i geting this error after few seconds of flashing: STATUS_SEC_IMG_TOO_LARGE
Hey, I have tried flashing a GSI ROM but got an error after attempting these two commands :
MrScarl3t said:
./fastboot erase system
./fastboot flash system Gsi.img
Click to expand...
Click to collapse
The "system" partition could not be found and after reading some of your comments I figured I had to reboot into fastbootd and not fastboot. Therefore I rebooted my phone but I am now stuck into a bootloop without being able to reach fastboot whatsoever. Holding down the volume down key does not seem to have any effect.
A few more details:
- adb does not detect my device anymore.
- I was previously on a stock ROM.
- I only managed to flash the vbmeta.img before the bootloop happened.
- Upon holding the volume up button, my phone briefly connects to my PC (for about 2 seconds) then disconnects and restarts again.
What could I do to be able to reach fastboot and flash the stock ROM again?
Thanks for reading
Hold power button + volume down button for 30 second if fails then drain the battery then repeat the process.
My battery is drained and no matter how long I hold the two buttons I can't get out the bootloop unfortunately...
-let the cable connected to pc and press (+ and power) when the splatch screen appears wait 3 secondes and release the power button keeping + button only.
-if not, try with an OTG disk inserted and do the same as above.
-if not, type on pc terminal: adb reboot recovery before connecting your phone.
Good luck.
Hey, thanks a lot for your reply
I have tried all the steps you've described me and I unfortunately can't reach recovery.
It seems as if the phone is reacting to it though as a black screen screen is displayed much longer than usual, although a few seconds later, the MI splash screen appears once again. Also, I can hear the beep from the pc when the phone connects but it keeps disconnecting 1 second later and proceeds to reboot. Seems like recovery is corrupted or something...
The phone does not show up under adb devices throughout the whole process. My pc only recognizes the usb port being connected (when the beeps are triggered) but does not identify the device as an android device.