My phone will keep itself stuck in reboot.
I can 3 button it to get to the downloading screen or the blue options screen.
In the downloading screen, I am able to connect Odin. I tried ADP to firmware and twrp...both failed (multiple times).
On start, it shows blue script reboot...then dead android with red exclamation triangle...then to the blue script menu. From this, I have tried:
- reboot (arrives back at same screen)
- reboot to bootloader
- apply update from SD card...says can not mount card (I tried loading disk image onto SD card to reflash that way)
- wipe data/factory reset...tries and quickly fails - something or other found, stays stuck
- clear cache...seems to do that and then leave me at the same screen
- mount system - asks me to do something that I do not at all understand
I tried downloading Kies3...it says it can not help me because I do not have a code from the old computer...?
I also tried downloading dr.phone.
Nothing seems to help.
I found out about Odin, firmware, twrp, windowsdiskimager, etc. ALL FROM THIS SITE... So, I am trying my best to understand all of this terminology and the processes.
However, after spending all day trying to solve this, I am feeling totally stumped...
Please help : )
Screen presently reads:
Android Recovery
MMB29M.N910T3UVU3EQC1
samsung/trltetmofrp/trltetmo
6.0.1/MMB29M/N910T3UVU3EQC1
user/release-keys
Use volume up/down and power
Reboot system now
reboot to bootloader
apply update from ADB
Apply update from SD card
Wipe data/factory reset
Wipe cache partition
Mount /system
View recovery logs
Power off
_____
Supported API: 3
# MANUAL MODE #
-- Appling Multi-CSC...
Applied the CSC-code : TMB
Successfully applied multi-CSC.
-------------------------------------------------------------
After trying Odin (3.09) and twrp (twrp-3.0.2-0-trltetmo.img.tar), this is the screen:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910T3
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FAP LOCK: ON
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T1, A1, P1
SECURE DOWNLOAD: ENABLE
UDC START
Custom Binary(recovery) Blocked by FAP Lock
...android image
downloading...
Do not turn off target!!
------------------------------------------------------------
ODIN LOG:
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have fixed mine with same symptoms.
After two years of intensive use my n910t stuck at boot logo .
I heated the emmc with hot air and voila the phone booted normally just i broked my front cam
I downgraded to official lollipop version to get more battery life and much cooler cpu in my opinion !
Related
Hi there Galaxy Tab community!
I'm having trouble fixing a Sprint Galaxy Tab (SPH-P100, CDMA).
I have tried a lot of different solutions and none of them are working for me.
Maybe someone can point out what the issue with my SGT is.
Current status: will get stuck at the "glowing" Samsung Logo (have let it sit for 15-20 minutes after reflashes but still stays there)
I don't really know how to explain this issue so I'm hoping one of you kind members can explain this to me. In Android system recovery <3e> mode before I did any flashing I get this error notice:
# MANUAL MODE #
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
E:Can't mount CACHE:log/recovery.log
E:Can't open CACHE:log/recovery.log
E:Can't mount /dev/block/mmcblk0p1
(no such file or directory)
Is E: the SD card?
I do not have an SD card put in. And when I do, the above error message still appears. There is no SD card mounting error notice. And attempting to do an SD card update.zip does attempt successfully.
Now after trying to ODIN flash back to stock firmware (EA24, DJ30, stock with no modem) they all flash successfully, but all of them still get stuck at glowing samsung logo. And I still get the above mounting error message in recovery.
I did not tick "re-partition" yet, would this make a difference? (I tried searching for what it does but couldn't find any explanation)
Would flashing with Heimdall be any different than ODIN?
And the other solution I read was to reformat the internal SD to rfs format using roto JME (but I think that's only for GSM support?)
ANy help/suggestions would be appreciated!
UPDATE!!!: FIXED!!
Followed this step by step carefully and exactly from step 1 - 7: posted by emieczko (THANK YOU!!!!)
http://forum.xda-developers.com/showpost.php?p=13113921&postcount=21
so now I have to figure out if I still get the above error about E:.. but im scared if its really fixed for good. I will keep this updated! I love this forum!
UPDATE 2: shoot.. spoke too soon haha, tried to do a reflash of EA24 through heimdall and now in original situation. Only attempted another flash because each time i shutdown and restarted it would get stuck, until i would go into recovery and do a factory wipe/ clear cache, which would allow it to then boot to android.
UPDATE3: humm interesting, the OP http://forum.xda-developers.com/showpost.php?p=11650984&postcount=1 actually worked and booted right after a successful flash of the no_modem stock firmware using ODIN and the pit file supplied. and the crazy part is, it still had my gmail account info saved even after i had 'factory reset' a few times when it wouldnt boot up correctly.
UPDATE 4: Okay managed to update from stock no modem (tab_sprint_noModem_20101226) using odin 1.3, then ODIN the EA24 (Sprint Galaxy Tab EA24 Flasher) successfully with first boot attempt! Then since this was more of an official flash, EB25 was downloaded and installed with first boot success! Then the next update before Gingerbread, and then gingerbread OTA was installed successfully with first boot success!!! So now under gingerbread rom everything seems to be working smoothly. no problems with the market, wifi issues seem to be fixed.. only last real thing to make it an officially fixed tab is rebooting and seeing if it boots okay and booting into recovery and seeing if the E: errors still occur.. both which I don't want to face atm haha.\
UPDATE 5: So I was able to successfully reboot 3 times in a row. The method I used was the tablet plugged in with charger the entire time. I noticed upon removal of charger, apps would force close within minutes if i attempt to open even more apps system reboot and hang would occur. The only solution to get it up and working again is to plug the charger back in, then factory reset/ wipe cache and reboot. (FYI: first boot after a factory reset, the tab should vibrate on the 3rd-8th "glow" cycle of the samsung logo. if you see the logo loop.. then yea its boot loop haha). Attemping to boot the tab up without charger plugged in, causes a boot logo hang.. I'm starting to suspect defective tablet :-\
UPDATE 6: Looks like this tablet functions 100% normal when plugged in via USB to PC or Charger. Booting into recovery does not show any failed mounts (reboot into recovery 3 tmies) UNTIL i unplug it and try to reboot into recovery again. ACCIDENTALLY flashed the DK28 (epic 4g) modem! ahhhh after reading all the warnings .. fortunately I was able to ODIN the pit and EA24 rom successfully and the GPS still works. AT the moment I am letting the tablet incrementally update itself to gingerbread (while it is plugged in via usb to pc). And done.. now to do more unorthodox tests to see why its failing with no usb plugged
UPDATE 7: I think this is a hardware issue.. seems to only work normal when plugged in. doh.
So even after flashing the stock EA24 rar in Odin, it just sits at the boot logo and won't do anything? That is odd. In the stock recovery did you do a factory data wipe?
pvtjoker42 said:
So even after flashing the stock EA24 rar in Odin, it just sits at the boot logo and won't do anything? That is odd. In the stock recovery did you do a factory data wipe?
Click to expand...
Click to collapse
Correct! This is the ODIN log after a successful flash of the SPH-P100.EA24.SECURE.REV07-FULL_CL871413
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> Sbl.bin
<ID:0/003> param.lfs
<ID:0/003> zImage
<ID:0/003> recovery.bin
<ID:0/003> factoryfs.rfs
<ID:0/003> cache.rfs
<ID:0/003> dbdata.rfs
<ID:0/003> modem.bin
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Added!!
<ID:0/004> Removed!!
Does anybody the average time ti takes to stay on that glowing Samsung Logo after a factory reset/ flash?
edit: nevermind, its less than 10 glowing logo cycles.
Here is the best way to sovle the problem.
if your TAB stuck in the logo ,and recovery got the tips, the IC sandisk "sdin5d2-2g" on the mainboard is broblem .I let some body who is good at repairing mobile phone to use tools to take the IC out ,and throw it into bin. I go back home unpack the zImage kernel ,modify the file in it ,such as fota.rc,recovery.fstab , (in Ubuntu , grep mmblk * */* */*/* ) ,let the mmcblk0p1 for sdcard ,mmcblk0p3 for cache mmcblk0p4 for data , and repack the kernel . Then I repartition my kingston 8g C6 TF card to four primary partition,5.4 for the 1st ,180m for the 2nd ,190m for the 3th ,2G for the 4th. At last I use heimdall to reflash zhe new zImage into kernel and recovery .When the tab reboot ,let it into recovery and wipe the data and cache and reboot . After 10mins ,you will get the first setting for the tab.
here is my new zImage: /115。com/file/dnm9n22m#
the links: /www。diypda。com/forum.php?mod=viewthread&tid=336743
I am a new man in XDA, I can't post the outside link ,so please use " . " to replace " 。 " and add "http:/ " the links ,sorry !
My email is [email protected], you are welcome !
Hi all !
Since a few days i have an Samsung Galaxy S4 Active (i9295), in the past i always rooted my Samsung Phones and flashed them with a custom ROM.
I boot up phone in recovery/download mode, restarting the phone while holding volume down.
The android figure pops up and everything looks fine, so i connect it to the computer and start Odin 3.07 (also tried other versions)
Odin can communicate with the device and shows [COM4], i press AP/PDA depening on Odin version and select the custom recovery file. I get back the following in the console.
Code:
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!
Odin tells me, RESTART on the top and indeed the device is restarting. It boots normally without a problem or error. Odin still shows RESTART on the computer screen.
Now im like, did it worked ? Lets boot to recovery !
No, it didnt work... No custom recovery.. BUT ! Odin now shows Passed and give me the following output in the console.
Code:
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I tried TWERP recovery, CWM Recovery and CWM with swipe.
Also tried to use a other computer, this didnt make any diffrence.
I hope for some tips
Oh, im stock now !
BrianVogel said:
Hi all !
Since a few days i have an Samsung Galaxy S4 Active (i9295), in the past i always rooted my Samsung Phones and flashed them with a custom ROM.
I boot up phone in recovery/download mode, restarting the phone while holding volume down.
The android figure pops up and everything looks fine, so i connect it to the computer and start Odin 3.07 (also tried other versions)
Odin can communicate with the device and shows [COM4], i press AP/PDA depening on Odin version and select the custom recovery file. I get back the following in the console.
Code:
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!
Odin tells me, RESTART on the top and indeed the device is restarting. It boots normally without a problem or error. Odin still shows RESTART on the computer screen.
Now im like, did it worked ? Lets boot to recovery !
No, it didnt work... No custom recovery.. BUT ! Odin now shows Passed and give me the following output in the console.
Code:
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
I tried TWERP recovery, CWM Recovery and CWM with swipe.
Also tried to use a other computer, this didnt make any diffrence.
I hope for some tips
Oh, im stock now !
Click to expand...
Click to collapse
I had this exact same issue when I tried to install custom recovery and it took me longer than it should have to solve. I rooted the phone first and then I was able to flash custom recovery. I have no idea why it worked, but it did. Try that and let me know.
Thanks for your quick reply
I always install SuperUser with CWM, so how can i do this without CWM ?
BrianVogel said:
Thanks for your quick reply
I always install SuperUser with CWM, so how can i do this without CWM ?
Click to expand...
Click to collapse
FIXED !
No root needed
When u flash with odin and it does a reboot, DIRECTLY input volume UP.
First reboot needs to enter CWM to let it work, if you skip this, it will be removed and default again.
Phone is flashed now without any problems
@BrianVogel
It is best to completely power off, wait, enter download mode.
If needed - modem.bin and NON-HLOS.bin can be then be Odin flashed without repeating the flash twice. Many shady guides tell you to flash modems twice to "make it stick". The reason it won't stick is download mode entered from restart meny.
Never run Odin on same PC where Kies is installed. Odin and Kies will fight to gain control of USB connected device.
Some borked Win7 need to run a Fix from M$ KB to properly detect Samsung phone as hardware even after installation of USB driver. Google to find the Fix, download and run.
Always connect directly to PC USB - never USB hub.
I had same problem and solve with these steps:
- In ODIN uncheck "Auto-reboot"
- flash using AP/PDA as you did, but your phone remains on
- disconnect cable
- now press Home + Volume Up + Power and hold while phone turn off and turn on again into recovery
- you should see new recowery and follow on screen steps
My friends galaxy note 3 SM-N9005 is basically stuck on the Samsung screen saying set warranty bit : kernel*
I'm trying to flash a ROM onto it First one i tried was 5.0 but it failed at the end saying IMG not found ? so then i tried the fist ROM on it ( Standard ) and that also failed giving me a message - sw rev check fail fused 2 binary 1*
Ive managed to get back to the start so now back to step one could you please help me ?*also tried safe mode and recovery nothing is working.
The images and videos on the phone are very very important my friends dad passed away not long ago and i need to get the images and vids off there*
thanks in advance for you help*
P.s ive just tried loading 4.2.2 on it gets the the end then fails and gives me this message
PC - <ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>*
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
PHONE- Volume size is too big 20488 < 61440
ODIN - Invalid ext4 image*
thanks again
Sent from my D6603 using XDA Forums
Not sure if I'm getting anywhere. Managed to boot rom on then Cwm auto recovery now it comes up with.
Recovery booting
Recovery is not seandroid enforcing
Set warranty bit: recovery
Sent from my D6603 using XDA Forums
Hi All This is my first post here .
yesterday i had a problem installing Xposed framework it said that it need a custom rom to be istalled
so i downloaded the TWRP app chosed my recovery version and run it, it was flashed succesfully but when i tried to boot to it i got this message in blue screen "System Software not authorized by AT&T ... "
I was able to boot the system normally so i tried to recovere the original stock recovery i downloaded an app called Flashify downloaded a stock recovery ( im not sure that it was the original ) and flash it , after rebooting i was shocked by the blue screen on the recovery and also on the system so i can't boot to the system now !
I tried to flash another TWRP using odin 3.10.6 and 3.12.3 but in the two cases it fails with this error :
Code:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Im totally lost now i have a lot of personal data inside ( 6gb of pics + 200 mb of call records + phone numbers )
I bought the phone from a third party , and we dont have any AT&T agency here
Information about the phone :
- I think that the phone was rooted because the root checker said that but when i install the su it said that i need a binary update and every time i do that it reboot without updating , when i tried from the recovery it said,signature failed or something like that .
- I had android 5.1 i think it was a custom rom because when the s6 logo appear I see under Custom with an open lock
When i go to the download mode they write
ODIN MODE //it was there even before i flash it
PRODUCT NAME : SM-G920V
CURRENT BINARY : CUSTOM // it was OFFICIAL before flashing
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
SECURE DOWNLOAD : ENABLED
RP SWREV : B:4 K:3 S:3
on the back of the phone the product name is : SM-G920F
on the previous rom it was : SM-G920F
Please any solution to back up my DATA then flash a new rom updated with a custom recovery Or even recover the original stock recovery only ( i was not using an AT&T sim card )
Hi All This is my first post here .
yesterday i had a problem installing Xposed framework it said that it need a custom rom to be istalled
so i downloaded the TWRP app chosed my recovery version and run it, it was flashed succesfully but when i tried to boot to it i got this message in blue screen "System Software not authorized by AT&T ... "
I was able to boot the system normally so i tried to recovere the original stock recovery i downloaded an app called Flashify downloaded a stock recovery ( im not sure that it was the original ) and flash it , after rebooting i was shocked by the blue screen on the recovery and also on the system so i can't boot to the system now !
I tried to flash another TWRP using odin 3.10.6 , 3.11 and 3.12.3 but in the two cases it fails with this error :
Code:
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Im totally lost now i have a lot of personal data inside ( 6gb of pics + 200 mb of call records + phone numbers )
I bought the phone from a third party , and we dont have any AT&T agency here
Information about the phone :
- I think that the phone was rooted because the root checker said that but when i install the su it said that i need a binary update and every time i do that it reboot without updating , when i tried from the recovery it said,signature failed or something like that .
- I had android 5.1 i think it was a custom rom because when the s6 logo appear I see under Custom with an open lock
When i go to the download mode they write
ODIN MODE //it was there even before i flash it
PRODUCT NAME : SM-G920V
CURRENT BINARY : CUSTOM // it was OFFICIAL before flashing
SYSTEM STATUS : CUSTOM
REACTIVATION LOCK : OFF
SECURE DOWNLOAD : ENABLED
RP SWREV : B:4 K:3 S:3
on the back of the phone the product name is : SM-G920F
on the previous rom it was : SM-G920F
Please any solution to back up my DATA then flash a new rom updated with a custom recovery Or even recover the original stock recovery only ( i was not using an AT&T sim card )
(whitch version i should use to flash 920F or V or A ? )