First of all I apologize for my English.
I would like your help ... desperate indeed. I decided to do some procedures to reinstall the rom of my Zenfone go, model X00BD (ZB500KG). But I ended up with everything, everything.
Currently it does not even connect, it just recognizes on devices like "Qualcomm HS-USB QDLoader 9008 (COM4). I tried all the possible tutorials I found in forums on the internet and so far nothing.
For example: In xFSTK, the device is not recognized.
Anyway, who could help me with a tutorial I could solve?
help!!!
Related
HI guys, i have a problem,I have installed a boot image but it was not correct and my smart phone no longer turns on does nothing and when I connect to the pc I get qualcomm hs-usb 9008 and nose to do, I read that the program qualcomm can be repaired but I do not have much experience, could help me please
Hi Guys,
I have HUAWEI W1-U00. Recently it fails to boot. It is in US not China language. I tried to flash room but it is not working as DOWNLOAD.INF driver of SimpleIO is also unable to be installed. My phone is appeared as Qualcomm HS-USB QDLoader 9008. When I click on Download button of eMMCdownload, my phone doesn't change to HS-USB Diagnostic 9006! And I stuck there.
Please Help as it is now around 3 weeks now, but still it is not working!!! Please help,
bricked HUAWEI W1-U00
rugemma12 said:
Hi Guys,
I have HUAWEI W1-U00. Recently it fails to boot. It is in US not China language. I tried to flash room but it is not working as DOWNLOAD.INF driver of SimpleIO is also unable to be installed. My phone is appeared as Qualcomm HS-USB QDLoader 9008. When I click on Download button of eMMCdownload, my phone doesn't change to HS-USB Diagnostic 9006! And I stuck there.
Please Help as it is now around 3 weeks now, but still it is not working!!! Please help,
Click to expand...
Click to collapse
Hey, am new here.
Also undergoing the same hell... Have tried flashing it on windows 7 32 bit, No success.
Anyone with a Solution?
Hello guys.
So many sorry about my English.
I tried everything.
And you my last chance.
On my hands LG L90 D415, stuck on Qualcomm HS-USB QDLoader 9008.
It was rooted with CWM.
Mistakenly was installed wrong firmware (probably from D410)
Now phone with black screen and only responds in device manager like Qualcomm HS-USB QDLoader 9008(no recovery, no download mode).
LG Flash tools do not responds.
All drivers ok.
B2bSupport do not helps.
Options on B2bSupport: - Shipset W7 G2MDS, -port like in device manager, -target DIR C:\, -test AP and EMMC
AP check finished with "no response from the device. Check PMIC first and if still boot problem, replace AP" and "Failed to conect to the flash programer".
And i dont know what to do next. If someone has file "loader D415.img" and *.tot files, i will be very grateful.
Please help me!
lg l90 gard bricked
so have you fixed it i have the same problem here and i have those files so just pm me if you see this reply and tell me waht happend and we might fix it together i gesss...
Hi guys,
I have the same problem, the phone's chowing Qualcomm HS-USB QDLoader 9008 in device manager. Please help on how to repair boot
Maybe this helps
Well, I see nothing as of yet. I have been through almost all situations with this phone. I have had this happen to my phone before. Only problem, I don't remember exact fix. I will recommend this forum. http://forum.xda-developers.com/lg-g2/general/fix-unbrick-lg-g2-stuck-qualcomm-hs-usb-t2933830 It is for the G2, but I've used several of their threads for my phone. Read post first, but its the best solution I can offer. The only other thing you could try is searching and learning about Qualcomm's QPST program. Hope this helps.... Good luck
Please may your help me. My PC sees it as Qualcomm HS-USB QDLoader 9008.
May someone please provide me with a way to unbrick this device?
Sorry for my English. Thanks!
Flash stock rom
tigone said:
please may your help me. My pc sees it as qualcomm hs-usb qdloader 9008.
May someone please provide me with a way to unbrick this device?
Sorry for my english. Thanks!
Click to expand...
Click to collapse
flash via fastboot stock rom's your phone is fasboot mode
TigOne said:
Please may your help me. My PC sees it as Qualcomm HS-USB QDLoader 9008.
May someone please provide me with a way to unbrick this device?
Sorry for my English. Thanks!
Click to expand...
Click to collapse
QFIL - Rom flasher can help you. If you understand russian, you can use this like for unbricking the phone
http://4pda.ru/forum/index.php?s=&showtopic=780325&view=findpost&p=52237044
Hi,
I have a following problem with my Redmi 4X. I tried to flash new rom and reboot my phone on twrp. When the phone shut down nothing happens anymore just black screen. No fastboot or recovery mode. When I contact the phone to Windows pc it shows in device manager: Qualcomm HS-USB Diagnostics 900E (COM20). I have tried to flash new rom with QFIL and Miflash (tried to change the driver to Qualcomm HS-USB QDLoader 9008).
With QFIL the error is: Download Fail: Switch to EDL FailFailed to switch to Emergency Download mode.
With Miflash the error is: Cannot receive hello packet. MiFlash is trying to reset status!
Any suggestions?
https://www.youtube.com/watch?v=uxrhJkSZc6E
Already tried that. Doesn't seem to change a thing.
Shouldn't it turn the driver to "Qualcomm HS-USB QDLoader 9008" after test point method?
This is what shows in command prompt:
C:\Windows\system32>adb reboot edl
error: device '(null)' not found
C:\Windows\system32>adb devices
List of devices attached
C:\Windows\system32>
k4rpp4 said:
Shouldn't it turn the driver to "Qualcomm HS-USB QDLoader 9008" after test point method?
This is what shows in command prompt:
C:\Windows\system32>adb reboot edl
error: device '(null)' not found
C:\Windows\system32>adb devices
List of devices attached
Click to expand...
Click to collapse
After the test point method you will see a new "9008" device in the Device Manager.
Then all of the above commands will be completely irrelevant and useless.
In the 9008 mode use MiFlash, not QFIL/QPST, to reflash your phone.
Cheers!
The test points seems to change nothing. I think that after the " adb devices" command I should see my device listed but that is not the case and therefore impossible to flash rom. Somehow I should be able to change the "900E mode" to "9008 mode" without changing the driver manually and I think the test point method should do just that.
Here is video of what I have tried to do. If someone could point out what to do differently to get the flash work I would be very grateful.
https://drive.google.com/open?id=1aOkb3FCBzanMUW3WSdyuxyQO-33rdsBv
Windows 10 will not accept the 9008 driver because the driversignature ist not signed from Microsoft.
If you will unbrick it with Windows 10 64bit look here: https://www.youtube.com/watch?v=2d8KEruHWPg
and here: https://www.maketecheasier.com/install-unsigned-drivers-windows10/
Had allready done that also. Gave it another try without success
k4rpp4 said:
Had allready done that also. Gave it another try without success
Click to expand...
Click to collapse
Is the Qualcomm 9008 driver now installed?
Did you start the mi-flash tool with administrator privileges?
I installed the Qualcomm drivers but device manager still shows 900E driver unless I manually change it to 9008.
edit:
I finally succeeded with test point method. Now flashing. Im so grateful to you ConradB.
k4rpp4 said:
I installed the Qualcomm drivers but device manager still shows 900E driver unless I manually change it to 9008.
edit:
I finally succeeded with test point method. Now flashing. Im so grateful to you ConradB.
Click to expand...
Click to collapse
Perfect :good:
Bro please help my device in bricked
k23m said:
After the test point method you will see a new "9008" device in the Device Manager.
Then all of the above commands will be completely irrelevant and useless.
In the 9008 mode use MiFlash, not QFIL/QPST, to reflash your phone.
Cheers!
Click to expand...
Click to collapse
Thank you buddy .. Your 4 years old post help me to turn on my hard brick redmi 4x.
I don't know the actual reason of hard brick but The situation was my phone was in condition like
1. Possible to go in fastboot mode
2. When turning on there is only mi logo for fraction of second.
I tried test point method as described . It turned on in one attempt..I just want to add something. I face some issues after test point flashing . So I just flash miui again . Then It's working perfectly fine. After Test point flash check your battery. Maybe fully drained. Just charge it and turn it on..
I am posting this just for Information..
sayan990 said:
Thank you buddy .. Your 4 years old post help me to turn on my hard brick redmi 4x.
I don't know the actual reason of hard brick but The situation was my phone was in condition like
1. Possible to go in fastboot mode
2. When turning on there is only mi logo for fraction of second.
I tried test point method as described . It turned on in one attempt..I just want to add something. I face some issues after test point flashing . So I just flash miui again . Then It's working perfectly fine. After Test point flash check your battery. Maybe fully drained. Just charge it and turn it on..
I am posting this just for Information..
Click to expand...
Click to collapse
I do had same issue with my mobile but even when I tried to flash MIUI I got "ACK count don't match" attached img