I am using the MiPCSuite (ver. 3.2.1.3111) but it is unable to detect my Mi 5 (on both Global Stable and Global Beta). I read on the forums that this has been an issue since Marshmellow based MIUI has been released and that there is still no fix.
My bootloader is still locked (even though permission has been granted a week ago) so I can only use official ROMs.
My question is are there any alternative, such as a modded version of the suite?
I would like to know too as i can't even get my PC W10 to recognise my Xiaomi so can't put music on it.
Have to use a Mac it's the only way to get stuff on the phone.
silverblack said:
I would like to know too as i can't even get my PC W10 to recognise my Xiaomi so can't put music on it.
Have to use a Mac it's the only way to get stuff on the phone.
Click to expand...
Click to collapse
For some reason MTP only works properly from my USB 3.0 ports, but I'd still like the functionality to sync and manage my stuff. Xiaomi has some kind of bug that doesn't allow you to access most parts of the storage, or the phone just disconnects randomly after a few seconds if you try to copy something.
I just purchased new phone for my mom. I have problem using Team Viewer on XIAOMI phone. Tried different options but nothing works. I need full remote access.
I need to access phone either from my phone or PC. Any idea if there is a way to make it work ?
Is there any other software to allow full remote control ?
ART
I have not problem with TeamViewer. May be soft crash?
you must root your 4x
memento666 said:
you must root your 4x
Click to expand...
Click to collapse
Root not need
Make sure, pc and android have internet conecction. Im always be fine using it
Unfortunately, TeamViwer do not have full control for all android devices manufacturers.
The list of fully supported manufacturer can be found here: teamviewer.com/en/help/341-how-can-i-control-my-android-device-with-teamviewer
Hi,
I always found it saddening to notice EZCast5G (the "original") is updated at first and their knock offs are updated way later (as of writing this, there is 16602000 for EZCast5G, 16403000 for MiraScreen5G).
The update tool let's you easily analyze the update process. And if you fake the reply from this URL with (for example) miniweb to always dish out latest EZCast5G firmware then your knock off will become an original.
These are the requests made for a legit EZCast5G and a MiraScreen5G:
Code:
[COLOR="Purple"]curl http://www.iezvu.com/upgrade/ota_rx.php -d "{\"version\":1,\"vendor\":\"ezcast5g\",\"mac_address\":\"authorshxj\",\"softap_ssid\":\"000000-00000000\",\"firmware_version\":\"16602000\"}"[/COLOR]
[COLOR="Blue"]curl http://www.iezvu.com/upgrade/ota_rx.php -d "{\"version\":1,\"vendor\":\"am8252_nand_mirascreen\",\"mac_address\":\"authorshxj\",\"softap_ssid\":\"000000-00000000\",\"firmware_version\":\"16403000\"}"[/COLOR]
These are the official replys where you need to always dish out the first one and the update tool will do the rest:
Code:
[COLOR="Purple"]{"ota_conf_file":"http://cdn.iezvu.com/upgrade/ezcast5g/ezcast5g-16602000.conf","ota_fw_file":"http://cdn.iezvu.com/upgrade/ezcast5g/ezcast5g-16602000.gz","ota_enforce":true}[/COLOR]
[COLOR="Blue"]{"ota_conf_file":"http://cdn.iezvu.com/upgrade/am8252_nand_mirascreen/am8252_nand_mirascreen-16403000.conf","ota_fw_file":"http://cdn.iezvu.com/upgrade/am8252_nand_mirascreen/am8252_nand_mirascreen-16403000.gz","ota_enforce":true}[/COLOR]
When I opened mine it even read "5G EZCAST V1.4" on it - so I was pretty sure it should work. And it did. So for $17 one year ago I got myself a neat working EZCast5G. The MiraScreen5G gets into bootloader mode by pressing the one and only button right when you plug it into USB - no need to shorten pin 19 and 20 of the AM8252.
Thank you.
Some questions.
How to use this curl command with miniWeb?
Hi,
BUMP
No honestly, could you elaborate how this works ? Have 2 MiraScreen5G dongles...
Ender
Hi,
with some help from Chatty and another forum i got it done !
First i needed to add a line to my hosts file:
(On windows its found in C:\Windows\System32\drivers\etc)
Code:
127.0.0.1 www.iezvu.com
Then i downloaded miniweb and created a file containing the desired server answer.
Miniwebs web root resides in the "htdocs" folder by default, so i created a folder named "upgrade" and in that folder a file named "ota_rx.php.
I edited that file to contain this text:
Code:
{"ota_conf_file":"http://cdn.iezvu.com/upgrade/ezcast5g/ezcast5g-16602000.conf","ota_fw_file":"http://cdn.iezvu.com/upgrade/ezcast5g/ezcast5g-16602000.gz","ota_enforce":true}
I fired up miniweb with the parameter "-p 80" to listen on the stabdard web port.
THEN i started the EZ Updater app, connected my dongle in Flash mode and VOILA it detected the version i wanted it to detect.
So it flashed (took forever with several loops) my MiraScreen5G to a EZCast5G !!!!
After that initial update the dongle detected a newer version and updated okay.
Please note that AFTER the update you cannot get into flash mode by simply pressing the key. I assume that key is not considered existing anymore since the EZCast5G has none as well
So for further flash-fun we need to short the Pin like its descived by Chatty !
THANKS Chatty & all,
Ender
Just opened a K6 mirascreen and found these
nanya nt5cb64m16fp-dh 128mb ddr3 ram
am8272
samsung k9f1g08u0d 16mb flash
the pcb reads S?-EZCAST-8271-V2F
im unable to find a suitable firmware for it and no idea how to enter download mode....
---------- Post added at 06:02 PM ---------- Previous post was at 05:35 PM ----------
the firmware says 1.3707.11 btw
Hey Guys,
If someone knows, please share the knowledge.
Few Months ago when I was updating the firmware, my Dongle died due to power cut.
after reconnecting my PC couldn't read the version of my dongle. Today I wanted to revive my Dongle But have no to little experience on the Windows Debugging. I know my Dongle is not dead and it has no firmware, I also know that EZCast Repair tool can Flash the Firmware to it, I can download the firmware using the OP, I can also see that The App has options for Manually flashing the Firmware.
But I don't know how and what to do to access the areas shown in the Screenshot.
anyone please help me and point me to right direction.
Thanks in Advance.
SweenWolf said:
Hey Guys,
If someone knows, please share the knowledge.
Few Months ago when I was updating the firmware, my Dongle died due to power cut.
after reconnecting my PC couldn't read the version of my dongle. Today I wanted to revive my Dongle But have no to little experience on the Windows Debugging. I know my Dongle is not dead and it has no firmware, I also know that EZCast Repair tool can Flash the Firmware to it, I can download the firmware using the OP, I can also see that The App has options for Manually flashing the Firmware.
But I don't know how and what to do to access the areas shown in the Screenshot.
anyone please help me and point me to right direction.
Thanks in Advance.
Click to expand...
Click to collapse
Have you found any help? I have updated to EzCast firmware but now my dongle doesn't appear on wifi list and on TV only shows EzCast logo..
dLightas said:
Have you found any help? I have updated to EzCast firmware but now my dongle doesn't appear on wifi list and on TV only shows EzCast logo..
Click to expand...
Click to collapse
No I found no help.
All I need is access the flashing area.
I had 2 tools laying around (think i deleted those)
One was older and directly opened the firmware flashing page, but that doesn't have the partition table of My Dongle.
And the other tool which have the partition table, opens on main page (which is automated and does nothing)
If somehow i could access the firmware flashing area on the newer tool then I could revive my dongle.
If your dongle contained older chip of Action Electronics (earlier than 52) then the older tool can flash your dongle.
nostupidthing said:
Just opened a K6 mirascreen and found these
nanya nt5cb64m16fp-dh 128mb ddr3 ram
am8272
samsung k9f1g08u0d 16mb flash
the pcb reads S?-EZCAST-8271-V2F
im unable to find a suitable firmware for it and no idea how to enter download mode....
---------- Post added at 06:02 PM ---------- Previous post was at 05:35 PM ----------
the firmware says 1.3707.11 btw
Click to expand...
Click to collapse
Today there was a firmware upgrade available and after updating it's dead any help
Edit: OK I was able to flash using this tool (https://mirascreen.com/pages/repair-tool-for-chip-8272-products) but still nothing comes up...
Edit 2: The new firmware is 1.10505.52
MiraScreen G9 Plus
=================
[Name Model] , [Vendor String] , [Supported of the "MiraScreen G9 Plus"]
(EZCast5G) - ezcast5g - Not supported
(MiraScreen5G) - am8252_nand_mirascreen - Not supported
(EZCast 2H) - am_8270_ezcast4k-dongle_ezcast2h - Not supported
(EZCast TX) - am_8270_ezcast-tx_nand-std - Not supported
(EZCast 2) - am8271_ezcast2K - Not supported
(EZCast 4K) - ezcastduo - Not supported
(EZCast Band1) - am_8271_ezcast2-dongle_b1 - Not supported
(EZCast Ultra) - am_8275_ezcast-dongle_ultra - Not supported
(AnyCast M100) - sage_8272_mirascreen-dongle_anycast - Supported
(MiraScreen K6) - am_8272_mirascreen-dongle_std - Supported
Check Firmware over http api:
https://api.ezcast.com/api/firmware...mirascreen-dongle_std&firmware_version=1.10.3
https://www.ezcast.com/service/ota/..._8272_mirascreen-dongle_std&rx_version=1.10.3
Current official firmware version for the "Mirascreen G9 Plus": 1.10505.61
Do you know others? I would for the model "Mirascreen G9 Plus"?
"Mirascreen G9 plus" supports alternative Firmware (Firmware tested on the "MiraScreen G9 Plus"):
FW v1.13610.47: http://cdn.iezcast.com/upgrade/am_8...dongle_std_official-1.13610.47-0x99A7C4FD.img
Flash Tool: https://cdn.shopify.com/s/files/1/0017/6553/9884/files/MiraScreen_8272_Repair_Tool.rar
FW v1.10505.3: http://cdn.iezcast.com/upgrade/sage...gle_anycast_official-1.10505.3-0x937AC2AD.img
Flash Tool: https://cdn.shopify.com/s/files/1/2427/2515/files/AnyCast_M100Repair_Tool.zip
Small modification of Wi-Fi antenna:
https://forum.xda-developers.com/t/mirascreen-g9-plus-hw-fw-mods.4391225/
Hi to all, can anyone help me please with my EZ mira app and dongle device associated with it (miracast).
I have tried to upgrade software for my miracast device thru EZmira app, but suddenly Commercials pop up and my upgrade has been stuck at 10% and won't go further , worse after disconnect or reset there is no signal at all anymore it does not start /boot nor emmit wifi signal. What to do (because of stupid commercial)??
I tried to reset device several times but nothing, tried reseting thru PC but it does not load or Windows does not recognoze device to upgrade it thru web tools.
Please can anyone get that firmware back in my device and restore it .
Much appriciated and thanks in advance!
Anton TNT said:
Hi to all, can anyone help me please with my EZ mira app and dongle device associated with it (miracast).
I have tried to upgrade software for my miracast device thru EZmira app, but suddenly Commercials pop up and my upgrade has been stuck at 10% and won't go further , worse after disconnect or reset there is no signal at all anymore it does not start /boot nor emmit wifi signal. What to do (because of stupid commercial)??
I tried to reset device several times but nothing, tried reseting thru PC but it does not load or Windows does not recognoze device to upgrade it thru web tools.
Please can anyone get that firmware back in my device and restore it .
Much appriciated and thanks in advance!
Click to expand...
Click to collapse
Do you have a specific device?
Manufacturing publishes tools to restore some firmware here:
EZCast: https://www.ezcast.com/repair
MiraScreen:
https://mirascreen.com/pages/repair-tool-for-chip-8268-8252-products
https://mirascreen.com/pages/repair-tool-for-chip-8272-products
AnyCast:
https://any-cast.com/pages/repair-tool-for-chip-8268-8258-products
https://any-cast.com/pages/repair-tool-for-chip-8272-products
renda-l said:
Do you have a specific device?
Manufacturing publishes tools to restore some firmware here:
EZCast: https://www.ezcast.com/repair
MiraScreen:
https://mirascreen.com/pages/repair-tool-for-chip-8268-8252-products
https://mirascreen.com/pages/repair-tool-for-chip-8272-products
AnyCast:
https://any-cast.com/pages/repair-tool-for-chip-8268-8258-products
https://any-cast.com/pages/repair-tool-for-chip-8272-products
Click to expand...
Click to collapse
I have trided this solution , but no prevail, like device is dead, nothing just blank screen after failed update
Anton TNT said:
I have trided this solution , but no prevail, like device is dead, nothing just blank screen after failed update
Click to expand...
Click to collapse
This procedure works 100%, completely restores the firmware. If only an incorrect update occurred.
renda-l said:
This procedure works 100%, completely restores the firmware. If only an incorrect update occurred.
Click to expand...
Click to collapse
I'm not shure maybe I'm doing something wrong, but even windows doesn't recognize device
Anton TNT said:
I'm not shure maybe I'm doing something wrong, but even windows doesn't recognize device
Click to expand...
Click to collapse
Yes, of course, if the firmware is faulty, the device is not recognized and does not work. You must follow the Firmware Recovery Procedure. The device will most likely be repaired. Unfortunately, unless you specify a specific type, you can't be specifically advised on how to proceed.
renda-l said:
Yes, of course, if the firmware is faulty, the device is not recognized and does not work. You must follow the Firmware Recovery Procedure. The device will most likely be repaired. Unfortunately, unless you specify a specific type, you can't be specifically advised on how to proceed.
Click to expand...
Click to collapse
It is MIRACAST, I dont know chip number but it is dongle type round shaped eith EZmira app controlled
Anton TNT said:
It is MIRACAST, I dont know chip number but it is dongle type round shaped eith EZmira app controlled
Click to expand...
Click to collapse
Set your device to Recovery mode according to the procedure and use the tool for chip 8268/8252 or 8272. If the response is "device connected", it is a given chip set.
renda-l said:
Set your device to Recovery mode according to the procedure and use the tool for chip 8268/8252 or 8272. If the response is "device connected", it is a given chip set.
Click to expand...
Click to collapse
on which side is pin 7 and 8 ? Chip on my board is square shaped and got pins on all sides. Just to be sure not to fry anything, which side is NAND memory
Anton TNT said:
on which side is pin 7 and 8 ? Chip on my board is square shaped and got pins on all sides. Just to be sure not to fry anything, which side is NAND memory
Click to expand...
Click to collapse
If your device has a button, first try to enter recovery mode, press the button and connect USB.
In the procedure is a photo of the MCU and these pins are shown.
Hello together,
I'm new here and have a special question.
We use three cognex MX-1100 mobile scanner with integrated Nokia 4.2 (TA-1149 / TA-1157).
Since Android 11 there are a several issues first of all the phones lost WIFI and didn't connect again automatically.
So I thought about unlock the bootloader and install an operating system without any google service.
I used my replacement phone read a lot of informations and try.
The bootloader is unlocked that worked very well.
I tried to use TWRP but it can't mount, format, convert internal storage.
So I transfer lineageOS with adb and brick that phone.
I found an Android 9 image to recover it.
Now it's working again with Android 9 but I can't connect to any WIFI.
This seems to be a bug in this Image.
Is there any chance to get LineageOS or something else on Nokia 4.2?
Many thanks
> Now it's working again with Android 9 but I can't connect to any WIFI.
Do you have correct MAC address on the device? If it's not correct, do you have whitelist enabled on the router?
> Is there any chance to get LineageOS or something else on Nokia 4.2?
Try installing GSI images. In another thread I've read not all versions work on 2.2, so try multiple.
nswed said:
Do you have correct MAC address on the device? If it's not correct, do you have whitelist enabled on the router?
Click to expand...
Click to collapse
Thanks for your reply but it is not a MAC problem, I can typ in my wifi password and the mobile device didn't connect. If I tap on my wifi network again nothing happens.
Where I can find an GSI image and how I can install it without TWRP?
updater14 said:
Thanks for your reply but it is not a MAC problem, I can typ in my wifi password and the mobile device didn't connect. If I tap on my wifi network again nothing happens.
Where I can find an GSI image and how I can install it without TWRP?
Click to expand...
Click to collapse
Maybe try setting static IP? Does mobile data work?
Google "lineageos gsi images", and there will be. There are also Android 12 beta images.
Install via fastboot. I'd reflash old firmware before doing it, just to make sure it will work.
nswed said:
Maybe try setting static IP? Does mobile data work?
Click to expand...
Click to collapse
No...
I can tap on my WiFi, put in my password and after that nothing.
I tap on my WiFi again no password field prompt no connection no error message...
I try to install every image from:
Andy Yan's personal builds // GSI - Browse /lineage-18.x at SourceForge.net
sourceforge.net
and this one aosp_arm64_ab-img-7468133.zip from
Artifacts
ci.android.com
no one is working.
So, I installed magisk via fastboot, and it all seems fine, but I can't seem to find any modules on the module section? There's only the install from storage option... Did I do something wrong?
kznegative said:
So, I installed magisk via fastboot, and it all seems fine, but I can't seem to find any modules on the module section? There's only the install from storage option... Did I do something wrong?
Click to expand...
Click to collapse
No you've done nothing wrong. However, you gotta install modules which you liked to have or you needed on your phone by yourself. For instance, I have a Poco X3 Pro too and I have installed some performance booster and a graphics driver update using magisk.
You can find useful modules by simply googling them.
SinaPakdel92 said:
No you've done nothing wrong. However, you gotta install modules which you liked to have or you needed on your phone by yourself. For instance, I have a Poco X3 Pro too and I have installed some performance booster and a graphics driver update using magisk.
You can find useful modules by simply googling them.
Click to expand...
Click to collapse
can you help me i have poco x 3 pro the mac address is unavailible ip address is also not available wifi and bluetooth si also not working since a month reseted too many times nothing happens changed roms changed kernels nothing happens please help me brother
ishaan dhingra said:
can you help me i have poco x 3 pro the mac address is unavailible ip address is also not available wifi and bluetooth si also not working since a month reseted too many times nothing happens changed roms changed kernels nothing happens please help me brother
Click to expand...
Click to collapse
Hit me up in telegram bro:
忍者 Сина
Untitled-1.psd
t.me