Related
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
felixflo said:
hi everyone
i tried to update rom but at the end of the process...UPDATE ERROR
I tried to recover but nothing...
Now my wizard is blocked in a very strange situation: bootmood (red green blue screen) is flashing turning on and off...
please help me! what can i do???
Click to expand...
Click to collapse
As long as its getting into Bootloaders (RGB) nothing to worry.
Most probably you have a weak or dead battery,recharge it fully and flash the official stock rom in Bootloaders,it'll recover back,but if the battery is gonner,get a new battery.
thx
now when i try to flash the rom...ERROR invalid update tool
....
Download it
Down load a RUU from the TNT's ROM i think is the better Ruu for wizard but search it men or try the Mun's one!
Any Suggestions on what to do With my SGH-I537? It won't reboot or anything Just stuck on At&t Logo. Only thing I Can do is Go into downloading mode ? Any help.
Camchilovang209 said:
Any Suggestions on what to do With my SGH-I537? It won't reboot or anything Just stuck on At&t Logo. Only thing I Can do is Go into downloading mode ? Any help.
Click to expand...
Click to collapse
Read the stickies.
http://forum.xda-developers.com/gal...alaxy-s4-active-firmware-guide-t2892445/page1
Hello, Please I want to ask if i need to unlock my bootloader before flashing the recovery or roms on this i537 running android 4.3
This will be for the SM-G935D/SC-02H Japanese variant of the s7 edge.
Stock ODIN firmware: https://www.androidfilehost.com/?fid=817550096634767393 (SC02HOMU1BQC5 Nougat)
TWRP 3.1.1: https://www.androidfilehost.com/?fid=673791459329056265
HKROM V2: https://www.androidfilehost.com/?fid=817550096634771123
HKernel for hero2qltedcm V2 (June):https://www.androidfilehost.com/?fid=961840155545571333
Kernel includes:
CVE updated
Permissive
F2FS support
Ramdisk changes the same as hero2qltechn variant. (All changes are the same)
Kernel Change-log:
https://github.com/travismills82/android_kernel_samsung_msm8996/commits/test-tw-7.0
TWRP Unofficial:
F2FS Support
More partitions supported for backup and restore compared to official version
How to root this device: https://forum.xda-developers.com/s7-edge/how-to/guide-sm-g9350-s7-edge-qualcomm-sd820-t3410969
Really amazing developer I've met!
Thank you so much @travis82
after i flash this i can't even access download mode and recovery mode. my phone keeps restarting with message "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) please help me.
gAracUh said:
after i flash this i can't even access download mode and recovery mode. my phone keeps restarting with message "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) please help me.
Click to expand...
Click to collapse
twrp 3.0.3 https://www.androidfilehost.com/?fid=817550096634747128
This recovery working for you? Others stated the one in the op works just fine, but since I do not have this device to test personally I can only go off of what users say.
it's working for me, after i flash the ROM i think my phone got bootloop that's why i boot again to download mode but when i tried to flash stock rom it gives a fail. now my phone stuck on led blue light and "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color). i need to wait to drain the battery and try if i can boot to download mode again.. i'm afraid if i can't access download mode again or recovery.
You guys are remembering to format data on a new twrp install or a new os version install? 6-7,7-8 get it? These roms or recoverys will not brick the devices I made them for kinda impossible.
You do know a brick right? Brick = no power nothing just a pricey paperweight.
how about my problem "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) and it keeps restarting i can't access recovery either download mode
gAracUh said:
how about my problem "Recovery Booting (Blue text color) and "Set Warranty Bit: Recovery" (Yellow Text Color) and it keeps restarting i can't access recovery either download mode
Click to expand...
Click to collapse
did u unlock your bootloader? sounds like you did not.
it won't my phone to unlock bootloader everytime i run CROM it closes automatically. until now i can't believe my phone was bricked and i don't have any idea to fix this without download mode. even if i bring this to service center i think they will not to accept my phone because my warranty is already void.
hy i recently bought this(sc02h) model from Japan but currently using it in Australia. everythng is fine except for the rom.....there is lots of bloatware apps in japanese which i dont realy need and the starting animation of docomo is bothering me too. So is there anyway i can use a global firmware with no bloatware in this model?? i dont want any root or custom rom . only want to flash with odin
Thanks for ur help in advance
ch0c0lateb0yctg said:
hy i recently bought this(sc02h) model from Japan but currently using it in Australia. everythng is fine except for the rom.....there is lots of bloatware apps in japanese which i dont realy need and the starting animation of docomo is bothering me too. So is there anyway i can use a global firmware with no bloatware in this model?? i dont want any root or custom rom . only want to flash with odin
Thanks for ur help in advance
Click to expand...
Click to collapse
no global firmware only jap firmware. You got what you got and are stuck with it. Enjoy your phone.
travis82 said:
no global firmware only jap firmware. You got what you got and are stuck with it. Enjoy your phone.
Click to expand...
Click to collapse
shame....i was starting to like this blue coral version...still happy though...been using s7 black for a while now.
Kernel updated to V2 with June cve patches etc.. check changelogs in 1st post.
Hello! first of all thank you for this thread. I've been reading since the first thread that sir Travis has created.
I just can't unlock my bootloader, I think it is the reason why I am having bootloops after installing the rom , and even I install the rom in this thread I am still having the bloated one after installing.
I tried installing different CROM Services from every other sources that I found, but still no luck. CROM service has stopped -error I get when opening after installing it on my phone.
I also tried factory resetting my phone then install CROM but still same error occurs.
I hope you can help me guys. Thank you in advance!
mavin11 said:
Hello! first of all thank you for this thread. I've been reading since the first thread that sir Travis has created.
I just can't unlock my bootloader, I think it is the reason why I am having bootloops after installing the rom , and even I install the rom in this thread I am still having the bloated one after installing.
I tried installing different CROM Services from every other sources that I found, but still no luck. CROM service has stopped -error I get when opening after installing it on my phone.
I also tried factory resetting my phone then install CROM but still same error occurs.
I hope you can help me guys. Thank you in advance!
Click to expand...
Click to collapse
SC-02H/SCV33 doesn't need to unlock bootloader. Because they aren't been locked bootloader.
So there's no need to do that.
baobeatmaker said:
SC-02H/SCV33 doesn't need to unlock bootloader. Because they aren't been locked bootloader.
So there's no need to do that.
Click to expand...
Click to collapse
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
mavin11 said:
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
Click to expand...
Click to collapse
I tried installing ROM again, but Im still stuck at the Galaxy logo which is blinking a little fast I think with blue led light that is not blinking even a little.
mavin11 said:
I tried installing ROM again, but Im still stuck at the Galaxy logo which is blinking a little fast I think with blue led light that is not blinking even a little.
Click to expand...
Click to collapse
You need to let the phone boot about 15-20mins bro.
You just need more patient.
mavin11 said:
oh.. didnt know that. thank you bro. then I dunno what I did wrong in the process that gives me a bootloop everytime I install the ROM from this thread..
but I will try to do it again at this moment, and will be back for the result. thanks again!
Click to expand...
Click to collapse
baobeatmaker said:
You need to let the phone boot about 15-20mins bro.
You just need more patient.
Click to expand...
Click to collapse
I tried it again, I've waited for almost 1 hour, and nothing happens. I wonder, before booting, something shows at the top with yellow font color says "Set Warranty Bit : kernel", is it normal for that to show? or is it mean that Im having a corrupted boot data?
mavin11 said:
I tried it again, I've waited for almost 1 hour, and nothing happens. I wonder, before booting, something shows at the top with yellow font color says "Set Warranty Bit : kernel", is it normal for that to show? or is it mean that Im having a corrupted boot data?
Click to expand...
Click to collapse
it's really normal. Mine shown that too.
Hi,
I recently bought a new red magic 3 phone , it comes with magisk root, I have uninstall through the magisk application , but when i rebooted my phone, the phone start with nubia logo and then goes dark and never open, is there any solution?
I have tried Dba and fast boot, dba won't work but fast boot connect to my phone though my PC but I can't install any zip file using fast boot,
In the recovery mode I have tried deleting user data and chach but no luck , I also tried to install red magic official Rom but always stuck at 25% and the reboot
Could anyone please help me , I have searched the internet but no solution, :crying:
Did you note which version of Magisk it was?
em90256 said:
Hi,
I recently bought a new red magic 3 phone , it comes with magisk root, I have uninstall through the magisk application , but when i rebooted my phone, the phone start with nubia logo and then goes dark and never open, is there any solution?
I have tried Dba and fast boot, dba won't work but fast boot connect to my phone though my PC but I can't install any zip file using fast boot,
In the recovery mode I have tried deleting user data and chach but no luck , I also tried to install red magic official Rom but always stuck at 25% and the reboot
Could anyone please help me , I have searched the internet but no solution, :crying:
Click to expand...
Click to collapse
Where is nubia red magic 3 global rom can you send me link plz
---------- Post added at 03:26 AM ---------- Previous post was at 03:25 AM ----------
em90256 said:
Hi,
I recently bought a new red magic 3 phone , it comes with magisk root, I have uninstall through the magisk application , but when i rebooted my phone, the phone start with nubia logo and then goes dark and never open, is there any solution?
I have tried Dba and fast boot, dba won't work but fast boot connect to my phone though my PC but I can't install any zip file using fast boot,
In the recovery mode I have tried deleting user data and chach but no luck , I also tried to install red magic official Rom but always stuck at 25% and the reboot
Could anyone please help me , I have searched the internet but no solution, :crying:
Click to expand...
Click to collapse
Plz reinstall Chinese rom first then I think u solve ur problem
lettucegoatee said:
Did you note which version of Magisk it was?
Click to expand...
Click to collapse
The latest one, I have updated to the latest version and the I have uninstall it
sandeepkhatri said:
Where is nubia red magic 3 global rom can you send me link plz
---------- Post added at 03:26 AM ---------- Previous post was at 03:25 AM ----------
Plz reinstall Chinese rom first then I think u solve ur problem
Click to expand...
Click to collapse
I have tried reinstalling Chinese version and global version in recovery mode with OTG USB but always stuck at 25 %
em90256 said:
I have tried reinstalling Chinese version and global version in recovery mode with OTG USB but always stuck at 25 %
Click to expand...
Click to collapse
Can you please send global rom link please
sandeepkhatri said:
Can you please send global rom link please
Click to expand...
Click to collapse
This guy is asking for help and all you do is repeatedly ask him to do you a favour ?
Give him a break : let hiom fix his problems and then kindly ask for that link...
Just my ow thought...
Soory
Try installing the same version the phone came with via otg (mine has 2.14),if u don't know try al the cn versions.
Else:
Unlock bootloader and install TWRP recovery.
Then install the rom you would like with TWRP.
Global:
https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
China roms:
http://ui.nubia.cn/rom/detail/62
Anyone tell me how can flash china rom flast with twrp recovery
I have red magic 3 and i am install the china rom and install the twrp so my mobile is stuck in boot logo but twrp is already installed so help me how fix it
before i use room global... i change to room china... after reboot...
stuck and can't do anything... please anyone know how to fix??
"your device is corrupt. it can't be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me???
dolip86 said:
before i use room global... i change to room china... after reboot...
stuck and can't do anything... please anyone know how to fix??
"your device is corrupt. it can't be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me???
Click to expand...
Click to collapse
Hey try using this thread https://forum.xda-developers.com/red-magic-3/how-to/stuck-fastboot-mode-check-ub-debugging-t3951498.
Someone had a similar issue to you. Hope this helps
dolip86 said:
before i use room global... i change to room china... after reboot...
stuck and can't do anything... please anyone know how to fix??
"your device is corrupt. it can't be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me???
Click to expand...
Click to collapse
If you can get into recovery then wipe data and then cache partition to see if you phone boot up. If you get stuck in bootloader mode then try to flash the system image from the following site:
https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm
After you flash the system image you should then be able to get into recovery to flash the rom you want. If you cannot get into recovery after flashing the system.img then you need to download all the files given in the above site and flash them.
tknguyencsu said:
If you can get into recovery then wipe data and then cache partition to see if you phone boot up. If you get stuck in bootloader mode then try to flash the system image from the following site:
https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm
After you flash the system image you should then be able to get into recovery to flash the rom you want. If you cannot get into recovery after flashing the system.img then you need to download all the files given in the above site and flash them.
Click to expand...
Click to collapse
Is the system.img file on your google drive is from CN ROM?
If not, can you teach me how to back-up my Nubia Red Magic 3 system image? My unit is CN ROM, box is Chinese so unit came with CN ROM
I need to backup my system in case I messed up again
leipnacht said:
Is the system.img file on your google drive is from CN ROM?
If not, can you teach me how to back-up my Nubia Red Magic 3 system image? My unit is CN ROM, box is Chinese so unit came with CN ROM
I need to backup my system in case I messed up again
Click to expand...
Click to collapse
Yes, that system img is from the CN rom. Be careful about back up your system image. I used twrp to back up my system partition and when I restore it my phone got into boot loop and never get out of boot loader mode until I flashed the system image from the above site. I do not know how to backup the system image properly.
tknguyencsu said:
Yes, that system img is from the CN rom. Be careful about back up your system image. I used twrp to back up my system partition and when I restore it my phone got into boot loop and never get out of boot loader mode until I flashed the system image from the above site. I do not know how to backup the system image properly.
Click to expand...
Click to collapse
I see. I successfully backup my system.img. I did it after I flashed my recovery with TWRP recovery.
Hi bro, i go the same problem as you, my Z20 got stuck after upgrade chinese room
dolip86 said:
before i use room global... i change to room china... after reboot...
stuck and can't do anything... please anyone know how to fix??
"your device is corrupt. it can't be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me???
Click to expand...
Click to collapse
i go the same problem as you, my Z20 got stuck after upgrade chinese room, how did you fix it?
I have the same problem. what can i do
I know how to 100% fix the problem
dolip86 said:
before i use room global... i change to room china... after reboot...
stuck and can't do anything... please anyone know how to fix??
"your device is corrupt. it can't be trusted and will not boot
visit this link on another device:g .co/ABH
any one have a problem like me???
Click to expand...
Click to collapse
Just go the this forumhttps://forum.xda-developers.com/red-magic-3/how-to/tool-nubia-red-magic-3-unbirck-tool-t3965044 and download the tool (if you have global model so download non eu and if you have Europe model so download eu version ) install the software in your computer and go to fastboot mode in your phone (by pressing [volume down+power button] ) and then select eld mode in your phone and connect it to your computer and then follow the instructions carefully I mean really CAREFULLY in your computer . Now sitback and wait until flashing finished, your phone will reboot automatically. Congratulations you fixed your phone . (THE ONLY PROBLEM WITH THIS METHOD IS YOU PUSHED BACK TO OLD VERSION OF SOFTWARE YOU HAVE TO UPDATE AFTER YOUR PHONE UNBRICKED) I am also a guy who went all this **** about 6 month ago it also took me 2 weeks to fix my red magic 3
Next time if you wanna go to cn then first unlock orm from developer option it will help
Have a nice day:fingers-crossed:
---------- Post added at 06:38 PM ---------- Previous post was at 06:36 PM ----------
Sonu tuplondhe said:
I have the same problem. what can i do
Click to expand...
Click to collapse
Just go the this forumhttps://forum.xda-developers.com/red...-tool-t3965044 and download the tool (if you have global model so download non eu and if you have Europe model so download eu version ) install the software in your computer and go to fastboot mode in your phone (by pressing [volume down+power button] ) and then select eld mode in your phone and connect it to your computer and then follow the instructions carefully I mean really CAREFULLY in your computer . Now sitback and wait until flashing finished, your phone will reboot automatically. Congratulations you fixed your phone . (THE ONLY PROBLEM WITH THIS METHOD IS YOU PUSHED BACK TO OLD VERSION OF SOFTWARE YOU HAVE TO UPDATE AFTER YOUR PHONE UNBRICKED) I am also a guy who went all this **** about 6 month ago it also took me 2 weeks to fix my red magic 3
Next time if you wanna go to cn then first unlock orm from developer option it will help
Have a nice day