Database Develop

[MSM Tool] Guac for All

To everyone who donated, I love y'all. This took a really long time to get lol but it's straight from support and I did not make any modifications to it; I hope it helps a lot of people. The revision is listed in the archive, I believe it's guacamole_21_O.07_190512_repack and the L2 drivers are included as well. MSM Tool/Guac for all
guacamole_21_O.07_190512_repack
https://mega.nz/#!bFs13QwT!qnlhqLp5aMdmneJA4rMQPs2EsIBS21QLqHprRyEuL08
Here are some instructions, kinda:
A few things to note:
- Works perfectly fine for unbricking GM1917 modeled OnePlus 7 Pros.
- Use the original cable and try to plug it into a USB 2.0 port. I've found that this is the most ideal condition.
- Make sure your device is charged up. If you can't see how much charge it has, leave it charged via the 30W warp charger for 40 minutes and that should be good enough.
- In the L2 drivers folder found in the archive, navigate to the 32 or 64 folder depending on your system's architecture, and click on the file that ends in the extension ".cat". Then, click "view signature", then "View certificate", then "Install." This is IMPORTANT.
- Then, make sure your device is powered OFF, then, plug in the USB-A side of the cable (big head) into your computer and do NOT connect the USB-C (small head) into your phone yet.
- Hold down Volume up AND volume down for five seconds, and while you're continuing to hold, plug the USB-C side into your phone. The drivers should automatically download, and you should see a "Qualcomm QD loader" device in Device Manager. If you see an exclamation mark or you don't see this, you are doing it wrong and you need to repeat the above steps.
- Open up MSMTool.exe as an administrator and click 'start' only. Should take a few minutes, but you will have a good-as-new OnePlus 7 Pro.
P.S: my paypal is: [email protected]
If you'd like to send a donation <3

Is this for T-Mobile users to get an unlocked international version or is it for any user with a OnePlus 7 Pro to unbrick their phone? Thanks for your effort in any case, Android/XDA is about community.
If it's for any user, what version will be pushed to the phone?

It appears to be OxygenOS OTA: 9.5.3: OnePlus7ProOxygen_21.O.07_OTA_007_all_1905120542 - for (GM21AA) 1917 Global/Unlocked and India 1911
MSMTool OPS File name: guacamole_21_O.07_190512
rev_OverSeas_190512_0521_release_OTA-BLOCK_Signed_fp1905120521_cve2019-04-01_ufs_Oxygen-OS-9.5.3.GM21AA
Great Job! I hope it works. If someone tries this please make a video!

Needs the Patched tool tho for converting

Just finished downloading the file it's for the GM21AA which is the international version. I think the exe still needs to be patched before we can convert the T-Mobile into international.
djsubterrain said:
Is this for T-Mobile users to get an unlocked international version or is it for any user with a OnePlus 7 Pro to unbrick their phone? Thanks for your effort in any case, Android/XDA is about community.
If it's for any user, what version will be pushed to the phone?
Click to expand...
Click to collapse

I've tried converting the T-Mobile variant using the patched binaries from the OP6T. It doesn't work. It immediately goes to N/A Status on the "Recording download time" step.
Likely the new MSM tool binary will need to be patched. If I was aware of the exact patches I'd do them for everyone. I'll see what I can dig up.

Dameon87 said:
I've tried converting the T-Mobile variant using the patched binaries from the OP6T. It doesn't work. It immediately goes to N/A Status on the "Recording download time" step.
Likely the new MSM tool binary will need to be patched. If I was aware of the exact patches I'd do them for everyone. I'll see what I can dig up.
Click to expand...
Click to collapse
Keep us posted! We need this

Dameon87 said:
I've tried converting the T-Mobile variant using the patched binaries from the OP6T. It doesn't work. It immediately goes to N/A Status on the "Recording download time" step.
Likely the new MSM tool binary will need to be patched. If I was aware of the exact patches I'd do them for everyone. I'll see what I can dig up.
Click to expand...
Click to collapse
That'll be awesome, thanks for taking the time.

Has anyone test for the actual GM21AA version and if it works?

Perhaps New Bounty
Perhaps New Bounty
Maybe we could start a new bounty for the first to crack the t-mobile to international Tool????

Bradl79 said:
Has anyone test for the actual GM21AA version and if it works?
Click to expand...
Click to collapse
???

@Lucifer6
what variant model is your phone? Tmo?

Bradl79 said:
Has anyone test for the actual GM21AA version and if it works?
Click to expand...
Click to collapse
jkyoho said:
@Lucifer6
what variant model is your phone? Tmo?
Click to expand...
Click to collapse
The support agent who I got it from managed to un-brick my phone. My phone's model is GM1917

Packages with build tag GM21AA are intended for the following variants:
GM1911: India
GM1917: Global/US Unlocked (?)
Packages with build tag GM21BA are intended for the following variant:
GM1913: EU
Packages with build tag GM31CB are intended for the following variant: (not supported at this moment)
GM1915: T-Mobile

A few things to note:
- Works perfectly fine for unbricking GM1917 modeled OnePlus 7 Pros.
- Use the original cable and try to plug it into a USB 2.0 port. I've found that this is the most ideal condition.
- Make sure your device is charged up. If you can't see how much charge it has, leave it charged via the 30W warp charger for 40 minutes and that should be good enough.
- In the L2 drivers folder found in the archive, navigate to the 32 or 64 folder depending on your system's architecture, and click on the file that ends in the extension ".cat". Then, click "view signature", then "View certificate", then "Install." This is IMPORTANT.
- Then, make sure your device is powered OFF, then, plug in the USB-A side of the cable (big head) into your computer and do NOT connect the USB-C (small head) into your phone yet.
- Hold down Volume up AND volume down for five seconds, and while you're continuing to hold, plug the USB-C side into your phone. The drivers should automatically download, and you should see a "Qualcomm QD loader" device in Device Manager. If you see an exclamation mark or you don't see this, you are doing it wrong and you need to repeat the above steps.
- Open up MSMTool.exe as an administrator and click 'start' only. Should take a few minutes, but you will have a good-as-new OnePlus 7 Pro.

djhotsauce said:
Packages with build tag GM21AA are intended for the following variants:
GM1911: India
GM1917: Global/US Unlocked (?)
Packages with build tag GM21BA are intended for the following variant:
GM1913: EU
Packages with build tag GM31CB are intended for the following variant: (not supported at this moment)
GM1915: T-Mobile
Click to expand...
Click to collapse
That's from the thread with the fastboot images aint it

bmg1001 said:
That's from the thread with the fastboot images aint it
Click to expand...
Click to collapse
you know it!

bmg1001 said:
That's from the thread with the fastboot images aint it
Click to expand...
Click to collapse
From "Repo of Oxygen OS Builds" over at the OnePlus forums. Just thought people should know. Because it's a lot of confusion going on because two packages got leaks. One for the EU version & one for the Global/US Unlocked version.

T_VASS said:
you know it!
Click to expand...
Click to collapse
I'm curious, I know they wrote that in the fastboot images thread because each one corresponds to a different device model, but does it truly matter? All OnePlus 7 Pro devices have the exact same hardware and partitions, no? So at the end of the day, flashing the US Unlocked software on a TMO device should be all fine and dandy, correct? Or is this one of those cases where OnePlus devices are different from others, like with the whole Widevine L1/L3 thing?
---------- Post added at 04:06 PM ---------- Previous post was at 04:04 PM ----------
djhotsauce said:
From "Repo of Oxygen OS Builds" over at the OnePlus forums. Just thought people should know. Because it's a lot of confusion going on because two packages got leaks. One for the EU version & one for the Global/US Unlocked version.
Click to expand...
Click to collapse
That's why I kinda mentioned it. Once the MSM Tool is patched, it should be able to be used on all OnePlus 7 Pro devices regardless of it's model (GM1917, GM1915, etc...) right?

bmg1001 said:
I'm curious, I know they wrote that in the fastboot images thread because each one corresponds to a different device model, but does it truly matter? All OnePlus 7 Pro devices have the exact same hardware and partitions, no? So at the end of the day, flashing the US Unlocked software on a TMO device should be all fine and dandy, correct? Or is this one of those cases where OnePlus devices are different from others, like with the whole Widevine L1/L3 thing?
---------- Post added at 04:06 PM ---------- Previous post was at 04:04 PM ----------
That's why I kinda mentioned it. Once the MSM Tool is patched, it should be able to be used on all OnePlus 7 Pro devices regardless of it's model (GM1917, GM1915, etc...) right?
Click to expand...
Click to collapse
Yeah I said the same thing earlier "Just finished downloading the file it's for the GM21AA which is the international version. I think the exe still needs to be patched before we can convert the T-Mobile into international."
A few people have tried it already and I think they got stuck at one of the steps.

[OP7TPRO][OOS HD01AA | HD01BA] Unbrick tool to restore your device to OxygenOS

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO and OP7T here are the EDL packages (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7T Pro.
They can also be used to rollback your phone to a previous release of OOS.
You can download the following versions:
HD01AA tools (International and indian firmware):
ANDROID 10:
10.0.3
10.0.4
10.0.5
10.0.7
10.0.8
10.0.11
10.0.12
10.0.13
10.0.14
ANDROID 11:
11.0.5.1
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
HD01BA tools (European firmware):
ANDROID 10:
10.0.3
10.0.4
10.0.5
10.0.7
10.0.8
10.0.9
10.0.11
10.0.13
ANDROID 11:
11.0.5.1
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
It should work with HD1910 (Chinese variant), HD1911 (Indian variant), HD1913 (EU variant) and HD 1917 (North America) models.
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device
FAQ:
I see a target button, what is that?
As you may (or may not!) be aware there are starting from 7T-Series build specifics to India.
If you use HD01AA tool, selecting "O2" as target should give you the global firmware while selecting "India" as target should give you the Indian one. See
https://imgur.com/2ipNyIy
for a screenshot.
If you use HD01BA tool, selecting "EU" should give you the EU firmware.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked in first part of this FAQ.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
How can I fix "SMT config not found" error?
Please refer to https://forum.xda-developers.com/showpost.php?p=83448961&postcount=61, all credits to @Shadow12347 for finding it out.
Credits:
@Miccia for sharing original link from OnePlus for 10.0.3 HD01AA tool and for sharing decrypted 10.0.3 HD01BA tool
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS
Related: Repo of OxygenOS builds.

Reserved

Reserved

Related: Repo of OxygenOS builds.

Thanks op I'm going to need this at some point ?

I've always loved the presence of EDL mode in OnePlus phones, if you like tinkering you always run the risk of a brick.
Thanks for releasing this, amazing work!

I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA

Neurom67 said:
I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA
Click to expand...
Click to collapse
Me too, let hope Mclarem tool pop up for EU version HD1913

Neurom67 said:
I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA
Click to expand...
Click to collapse
I believe the ROMs are the same, in which case this tool would also work on the Mclaren edition.

danieldmm said:
Me too, let hope Mclarem tool pop up for EU version HD1913
Click to expand...
Click to collapse
Hey Daniel. Good to see you here. Hope we will soon see your Tugapower ROMs for this device

Hi. Thank you for this tool. I'm not very familiar with this kind of stuff. I'm wondering. Can this be used as a ROM installation tool? I want to install OOS coming from HOS. But I cannt do a local update because the current HOS version is higher than OOS.

Neurom67 said:
I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA
Click to expand...
Click to collapse
danieldmm said:
Me too, let hope Mclarem tool pop up for EU version HD1913
Click to expand...
Click to collapse
As said in post #9, normally it should work with EU McLaren as well.
ZaryaMain said:
Hi. Thank you for this tool. I'm not very familiar with this kind of stuff. I'm wondering. Can this be used as a ROM installation tool? I want to install OOS coming from HOS. But I cannt do a local update because the current HOS version is higher than OOS.
Click to expand...
Click to collapse
Yes you can. Note that however it will wipe all data present on your device.

Some_Random_Username said:
As said in post #9, normally it should work with EU McLaren as well.
Yes you can. Note that however it will wipe all data present on your device.
Click to expand...
Click to collapse
Thank you. Thats fine. One more thing. Do I need to root the device? Or following your instruction on first post is sufficient.

ZaryaMain said:
Thank you. Thats fine. One more thing. Do I need to root the device? Or following your instruction on first post is sufficient.
Click to expand...
Click to collapse
Following instructions on first post is enough

Some_Random_Username said:
Following instructions on first post is enough
Click to expand...
Click to collapse
Do I need to select any specific mode in the EDL mode or just left it alone? I followed your instruction but nothing happened. status of connection is N/A and status of communication has been waiting for devices for long time.
---------- Post added at 05:48 AM ---------- Previous post was at 05:04 AM ----------
Some_Random_Username said:
Following instructions on first post is enough
Click to expand...
Click to collapse
I just realized that I got into fastboot mode instead of the edl mode. And hold volume up and down keys doesnt seem to work...
---------- Post added at 06:15 AM ---------- Previous post was at 05:48 AM ----------
ZaryaMain said:
Do I need to select any specific mode in the EDL mode or just left it alone? I followed your instruction but nothing happened. status of connection is N/A and status of communication has been waiting for devices for long time.
---------- Post added at 05:48 AM ---------- Previous post was at 05:04 AM ----------
I just realized that I got into fastboot mode instead of the edl mode. And hold volume up and down keys doesnt seem to work...
Click to expand...
Click to collapse
update: I got into edl via adb and switched from HOS to OOS. My phone is mclaren edition and it works the same. Everything is nice and smooth.
Thank you so much! @Some_Random_Username

Can I brush my device from HD1910 to HD1913 or something else?
Sorry My English!!!

Some_Random_Username said:
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO and OP7T here is the EDL package (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7T Pro.
It can also be used to rollback your phone to a previous release of OOS.
You can download it here: https://www.androidfilehost.com/?fid=4349826312261628475
It should work with HD1910 (Chinese variant), HD1911 (Indian variant), 1913 (EU variant) and HD 1917 (North America) models.
After use, your device will be restored to OOS 10.0.3.
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device
Click to expand...
Click to collapse
Hi thank you for the awesome work. I wanted to say what about when your device is bricked that the only function is an error message "Your device Is corrupt. It can't be trusted and will not boot.
When you have power button and volume down the screen goes black you think it powered off, you try to manually go into bootloader mode just to have the error message again and stays in a loop. There is no recognition on my PC except for a minute when you connect sound very rapidly it disconnects and then it's just dead except for the error loop.
My phone is brand new barely had barely a day and a half. Is there any fix for the phone it's an HD1910. Please help thank you.

slapman said:
Hi thank you for the awesome work. I wanted to say what about when your device is bricked that the only function is an error message "Your device Is corrupt. It can't be trusted and will not boot.
When you have power button and volume down the screen goes black you think it powered off, you try to manually go into bootloader mode just to have the error message again and stays in a loop. There is no recognition on my PC except for a minute when you connect sound very rapidly it disconnects and then it's just dead except for the error loop.
My phone is brand new barely had barely a day and a half. Is there any fix for the phone it's an HD1910. Please help thank you.
Click to expand...
Click to collapse
What about opening tool on your computer, maintaining power button to force your device to turn off, getting back into EDL, plug to your PC and press Start button on tool window as soon as possible?

Added HD01BA tool to go back to EU firmware, credit goes to @Miccia for sharing it

Hi. I am going to go from hydrogen ram to global oxygen ram. Can I use this method to do this? Because the Global Ram has not come yet

Mi8 H3G ROM

Hi, I'm a new user in the UK. My phone is running MIUI 10.3.4.0 Stable. I've tried to update through XDA forums to 10.3.5.0 but get a message that I can't downgrade.
I've tried to download the official MIUI 11 package from the website and this tells me that my current ROM carrier is different to that in the update package.
My system info says I'm running global 10.3.4.
Can anyone explain why I can't update and what I need to do to update.
I've found out that the ROM is specific to Three UK. Will unlocking the bootloader enable me to install the global ROM without me having to wait for Three to get their arse in gear?
Phone Mi8
Thanks
James

Rover75cdt said:
Hi, I'm a new user in the UK. My phone is running MIUI 10.3.4.0 Stable. I've tried to update through XDA forums to 10.3.5.0 but get a message that I can't downgrade.
I've tried to download the official MIUI 11 package from the website and this tells me that my current ROM carrier is different to that in the update package.
My system info says I'm running global 10.3.4.
Can anyone explain why I can't update and what I need to do to update.
I've found out that the ROM is specific to Three UK. Will unlocking the bootloader enable me to install the global ROM without me having to wait for Three to get their arse in gear?
Phone Mi8
Thanks
James
Click to expand...
Click to collapse
As soon as you can unlock your bootloader you should give Xiaomi.EU a try, its the bleeding edge development rom, and is extremely stable, and much improved over your current version. It is a huge improvement.
Plus the security certificates are dated Jan 2020

Thanks, I'll give that a go. I've got the software from Xaiomi website. Thanks again.

Well, that didn't work. Can't get any version to install. Time for a rethink.

I had this discussion with three yesterday as they are the ones that are holding it back. The guy I spoke to didn't have a clue. So much so he tried giving me Hauwei number so I could call them to resolve it. Then he gave me xiaomi's number. But when I told him to stop being silly and just explain why they are the only carriers holding it off and restricting the latest security on our phones he's said that they were in the process of looking into whether it would be better for their customers. I told him I was a customer and it should be up to me to decide and I didn't need a babysitter he just gave a generic "we are in the process of looking at it" so if you're on 3 as we are I don't think it will be pushed out on an OTA anytime soon.

Thanks. I've unlocked the bootloader now. Still unable to install a global or EU ROM so I'm going to install TWRP and flash it that way once I've backed it up.

Well, I'm glad to say I've solved it without having to root the phone. Just need to relock the bootloader again incase I need to sell the phone on.
I had to install TWRP through fastboot then install the zip file. The only issue I had was being unable to install the ADB on windows 10 so ended up swapping hard drives, installing Windows 7 then installing the drivers. That seems to have done the trick.

Rover75cdt said:
Well, I'm glad to say I've solved it without having to root the phone. Just need to relock the bootloader again incase I need to sell the phone on.
I had to install TWRP through fastboot then install the zip file. The only issue I had was being unable to install the ADB on windows 10 so ended up swapping hard drives, installing Windows 7 then installing the drivers. That seems to have done the trick.
Click to expand...
Click to collapse
Yes, Windows 10 is absolutely ridiculous. but you can get Adb tools to work on Windows 10 by disabling driver signature enforcement.
https://xiaomifirmware.com/guides-and-tips/disable-driver-signature-enforcement-windows/

[OP7PRO 5G EU][OOS 9.5.11 GM27BA] Unbrick tool to restore your device to OxygenOS

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, finally, almost one year after this device release date and similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO, regular OP7T, T-Mobile OP7T, regular OP7TPRO and T-Mobile OP7TPRO 5G here is the EDL package (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7 Pro 5G EU bough from EE in UK or Elisa in Finland.
It can also be used to rollback your phone to a previous release of OOS if for some reason you want to go back to an older firmware
It will only work with 5G EU variant GM1920
You can download the following version:
ANDROID 9:
9.5.11 GM27BA
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
Instructions:
Launch MsmDownloadTool V4.0.exe.
Power your device off.
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Credits:
@jkebwdn for getting 9.5.11 version from OnePlus
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
Votton for providing a server as an alternative mirror
OnePlus for the device and OS

Related: [CROSSFLASH/RESTORE] [Sprint 5G] Sprint OnePlus 7 Pro 5G to EU FW and back[10] by @Whoareyou

Thanks
Dear friend, you are an angel.
Im so so thankfull for this, you deserve all in this world. People like you are amaizing.
Greetings from Portugal, and thank you. i tilted with bricked phone .
Give me your paypall to donate.
Some_Random_Username said:
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, finally, almost one year after this device release date and similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO, regular OP7T, T-Mobile OP7T, regular OP7TPRO and T-Mobile OP7TPRO 5G here is the EDL package (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7 Pro 5G EU bough from EE in UK or Elisa in Finland.
It can also be used to rollback your phone to a previous release of OOS if for some reason you want to go back to an older firmware
It will only work with 5G EU variant GM1920
You can download the following version:
ANDROID 9:
9.5.11 GM27BA
Instructions:
Launch MsmDownloadTool V4.0.exe.
Power your device off.
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Credits:
@jkebwdn for getting 9.5.11 version from OnePlus
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS
Click to expand...
Click to collapse

tbarrosaugustoo said:
Dear friend, you are an angel.
Im so so thankfull for this, you deserve all in this world. People like you are amaizing.
Greetings from Portugal, and thank you. i tilted with bricked phone .
Give me your paypall to donate.
Click to expand...
Click to collapse
Hemm thanks but it was a team work as I wrote in the credits part
But if you're really sure you can find my PayPal email under my profile picture when you view forum from desktop

Sorry to bring up an old thread. Just wanted to know if you know where I can find the firmware to flash the 4g global version that works on the EE UK 5g phone.
I have the UK EE 5g GM1920 version and would like to load the global 4g version on it to enable the dual sim. I don't use 5g and don't care if it doesn't work.

will this unlock sim?

M1r4j said:
Sorry to bring up an old thread. Just wanted to know if you know where I can find the firmware to flash the 4g global version that works on the EE UK 5g phone..
Click to expand...
Click to collapse
Unfortunately you can't flash 4G global version on EE UK variant.
i'm.god said:
will this unlock sim?
Click to expand...
Click to collapse
I believe 5G EU variant shouldn't be SIM locked.

Question Oneplus 10 pro bricked. Try to convert china colorOs to oxygenOs.

Oneplus 10 Pro brick.
I done every steps.
Bootloader unlock successful.
Fastboot enhanced tools.
Payload.bin Flashed.
But my phone is restarting on logo.
So I find img file to flash manually.
I do manually flashing.
But now my phone completely brick.
No power on, No charging connection.
No any button combination.
How to I solve it? Any solution.?
Or any MSM tool for this device or how to I start again my phone.??

I will get my hands on my OP 10Pro today, such threads make me very wary!
This post details out each step, hope you followed them:
Oneplus 10 Pro Global Rom India / eu
✧ Oxygen OS 12.1 A11 IND full OTA.zip • Link 1 : Here • Link 2 : Here ✧ Oxygen OS 12.1 A11 EU full OTA.zip • Link 1 : Here • Link 2 : Here ◆ Instructions : • Unlock bootloader : fastboot flashing unlock • Flash payload.bin via fastbootD Here...
forum.xda-developers.com

gagan007 said:
I will get my hands on my OP 10Pro today, such threads make me very wary!
This post details out each step, hope you followed them:
Oneplus 10 Pro Global Rom India / eu
✧ Oxygen OS 12.1 A11 IND full OTA.zip • Link 1 : Here • Link 2 : Here ✧ Oxygen OS 12.1 A11 EU full OTA.zip • Link 1 : Here • Link 2 : Here ◆ Instructions : • Unlock bootloader : fastboot flashing unlock • Flash payload.bin via fastbootD Here...
forum.xda-developers.com
Click to expand...
Click to collapse
Bro It will not work for me.
Because my phone is completely off.
No power on.
No charging.
No PC connecting.
No Fastboot mode or recovery mode.
I think my phone is in EDL mood.
I want files like MSM tools for oneplus 10 pro

Zeescorpion said:
Bro It will not work for me.
Because my phone is completely off.
No power on.
No charging.
No PC connecting.
No Fastboot mode or recovery mode.
I think my phone is in EDL mood.
I want files like MSM tools for oneplus 10 pro
Click to expand...
Click to collapse
You have 2 options
1- Send it to service center, or
2- Waite for some time and search at chines forum for any solution

You know there is a MSM tool for chines versions just saying maybe you mist it

Zeescorpion said:
Oneplus 10 Pro brick.
I done every steps.
Bootloader unlock successful.
Fastboot enhanced tools.
Payload.bin Flashed.
But my phone is restarting on logo.
So I find img file to flash manually.
I do manually flashing.
But now my phone completely brick.
No power on, No charging connection.
No any button combination.
How to I solve it? Any solution.?
Or any MSM tool for this device or how to I start again my phone.??
Click to expand...
Click to collapse
You may have tried wrong firmware & that may be the reason for rebooting the phone continuously. You can try this method to unbrick oneplus 10 pro.
How to unbrick oneplus 10 pro - eydroid
Easiest way to unbrick oneplus 10 pro using the fastboot enhance tool on locked or unlocked bootloader easily.
eydroid.com

Im sure there's a way to convert to the Chinese device to another region with minimal risk..but honestly, the best take away from this is quite simple.
Do not buy Chinese phones to save a few pennies, this phone was always going to come to our shores so always best to wait.

dladz said:
Im sure there's a way to convert to the Chinese device to another region with minimal risk..but honestly, the best take away from this is quite simple.
Do not buy Chinese phones to save a few pennies, this phone was always going to come to our shores so always best to wait.
Click to expand...
Click to collapse
Yes i have an lot's of experience where all customer bring chinese phones & i told all of them to not buy these chinese phones but they just want to go for cheap.

Zeescorpion said:
Oneplus 10 Pro brick.
I done every steps.
Bootloader unlock successful.
Fastboot enhanced tools.
Payload.bin Flashed.
But my phone is restarting on logo.
So I find img file to flash manually.
I do manually flashing.
But now my phone completely brick.
No power on, No charging connection.
No any button combination.
How to I solve it? Any solution.?
Or any MSM tool for this device or how to I start again my phone.??
Click to expand...
Click to collapse
Chinese MSM
https://yun.daxiaamu.com/OnePlus_Roms/%E4%B8%80%E5%8A%A010%20Pro/9008%E7%BA%BF%E5%88%B7%E6%95%91%E7%A0%96%E5%8C%85ColorOS%2012.1%20A.07/NE2210domestic_11_A.07_2022011114400122.zip

g96818 said:
Chinese MSM
https://yun.daxiaamu.com/OnePlus_Roms/%E4%B8%80%E5%8A%A010%20Pro/9008%E7%BA%BF%E5%88%B7%E6%95%91%E7%A0%96%E5%8C%85ColorOS%2012.1%20A.07/NE2210domestic_11_A.07_2022011114400122.zip
Click to expand...
Click to collapse
My phone is also completely off.
No power on.
No charging.
No PC connectiion
No Fastboot mode or recovery mode.
and my device is EU NE2213 can i try this msm tool on my device
No PC connectiion without this option how is it possiblle to work msm tool

Khalid Ghouri said:
My phone is also completely off.
No power on.
No charging.
No PC connectiion
No Fastboot mode or recovery mode.
and my device is EU NE2213 can i try this msm tool on my device
No PC connectiion without this option how is it possiblle to work msm tool
Click to expand...
Click to collapse
As far as I'm aware your phone was initially a Chinese variant is that correct?
In which case it wouldn't be an EU phone at all..
So if there is a Chinese MSM tool then you can go ahead and use it to restore IF you can get into EDL mode...
If you've been unable to charge your phone then it's probably buggered..
Contact OnePlus and get a new phone.

dladz said:
As far as I'm aware your phone was initially a Chinese variant is that correct?
In which case it wouldn't be an EU phone at all..
So if there is a Chinese MSM tool then you can go ahead and use it to restore IF you can get into EDL mode...
If you've been unable to charge your phone then it's probably buggered..
Contact OnePlus and get a new phone.
Click to expand...
Click to collapse
no sir my phone was global version
i flashed indian payload.bin on it with fastboot enhance tool and i did one mistake that was i check the box "'ignor unknown partitions''
this time my phone state is no EDL mode not anything working for me

Khalid Ghouri said:
no sir my phone was global version
i flashed indian payload.bin on it with fastboot enhance tool and i did one mistake that was i check the box "'ignor unknown partitions''
this time my phone state is no EDL mode not anything working for me
Click to expand...
Click to collapse
Then it's a dead stick I would say.
But why on earth would you flash away from global?

dladz said:
Then it's a dead stick I would say.
But why on earth would you flash away from global?
Click to expand...
Click to collapse
at that time only indian update available on other thread and i could not beat it then....

Khalid Ghouri said:
at that time only indian update available on other thread and i could not beat it then....
Click to expand...
Click to collapse
Well if anything I'd have gone for the EU variant, they tend to get the right updates in a timely manner.
But that aside, the only real reason to change region would be to escape China's crap..
Something you didn't have a problem with.
But hey it's a learning curve, as things stand (albeit with some info I don't know about) I would say you have a paper weight.
So yep RMA time.. Luckily it doesn't boot so you can just say it died.
I would not recommend doing the same thing again.
I'm stepping back from helping with changing region, it's on the owner or people who've done it themselves, without MSM or proper usage of FE it's a mess.

dladz said:
Well if anything I'd have gone for the EU variant, they tend to get the right updates in a timely manner.
But that aside, the only real reason to change region would be to escape China's crap..
Something you didn't have a problem with.
But hey it's a learning curve, as things stand (albeit with some info I don't know about) I would say you have a paper weight.
So yep RMA time.. Luckily it doesn't boot so you can just say it died.
I would not recommend doing the same thing again.
I'm stepping back from helping with changing region, it's on the owner or people who've done it themselves, without MSM or proper usage of FE it's a mess.
Click to expand...
Click to collapse
hmmmm, thanks for reply and suggestion

Khalid Ghouri said:
hmmmm, thanks for reply and suggestion
Click to expand...
Click to collapse
Thanks for the dubious reply.
I fear for your next phone

Has anyone found a way to revive the device?

Well, this conversion is getting stupider...
On 9 Pro, european model, i was on OxygenOS. I download newer version of ColorOS & Lokal Update.apk. Flash it with Lokal Upgrade. Done! All Google services workt fine.
If i wanted to go back to OxygenOS, i downloaded downgrade rom. Flash it with Lokal Upgrade. Do 1, 2 official updates. Done!
Of course 9 Pro was older than 10 Pro now & we have MSM tool for any region.
By the way ColorOS was Far Better that OxygenOS. Only 2 negatives for me:
1. alarm does not sound with the phone off. Does not have that option;
2. notification (mail, whatsapp, etc) does not work. I need to check my phone from time to time.
Updates are very fast for ColorOS. For european Oxygen, NOT! We just got A.13... India A.15 hotfix & A.14. I guess that the software team is indian..

null0seven said:
Well, this conversion is getting stupider...
On 9 Pro, european model, i was on OxygenOS. I download newer version of ColorOS & Lokal Update.apk. Flash it with Lokal Upgrade. Done! All Google services workt fine.
If i wanted to go back to OxygenOS, i downloaded downgrade rom. Flash it with Lokal Upgrade. Do 1, 2 official updates. Done!
Of course 9 Pro was older than 10 Pro now & we have MSM tool for any region.
By the way ColorOS was Far Better that OxygenOS. Only 2 negatives for me:
1. alarm does not sound with the phone off. Does not have that option;
2. notification (mail, whatsapp, etc) does not work. I need to check my phone from time to time.
Updates are very fast for ColorOS. For european Oxygen, NOT! We just got A.13... India A.15 hotfix & A.14. I guess that the software team is indian..
Click to expand...
Click to collapse
Imagine thinking that broken notifications still makes ColorOS better. I went back to OOS12 specifically because of the notification problems. I mean what's the point of having a phone if you don't get instant notifications!?