Database Develop

[TOOL] 6T MsmDownloadTool v4.0.59 (OOS v9.0.13)

This tool can be used to revive a bricked OP6T and remove the 'Device is corrupt' error message on boot.
Contains the latest MsmDownloadTool v4.0.59 and OOS v9.0.13 which is compatible with International and McLaren editions.
OOS v9.0.11 can also be used to convert a T-Mobile model into a fully fledged International model, more info here.
Make sure that your phone is switched off.
Open device manager on your Windows PC.
Press and hold the Volume Up & Volume Down buttons then connect to your PC using your data cable.
Once the device is connected to your Windows PC, check if the phone is being recognized (Other > QUSB_BULK or Ports > Qualcomm).
If showing as Other > QUSB_BULK either wait for Windows to install the Qualcomm driver or download one of the drivers below and install.
Run MsmDownloadTool V4.0 and click Start.
NOTE: This will completely wipe your device and relock your bootloader.
Downloads
6T MsmDownloadTool v4.0.59 (OOS v9.0.13)
6T MsmDownloadTool v4.0.58 (OOS v9.0.12)
6T MsmDownloadTool v4.0.58 (OOS v9.0.11)
6T MsmDownloadTool v4.0.58 (OOS v9.0.6)
6T MsmDownloadTool v4.0.58 (OOS v9.0.5)
Driver
Alternative driver
Shameless plugs - OP referral link for any peops that would like $20/£20/€20 discount: OnePlus or PayPal donation link: PayPal.

Wow nice. Now to test this on T-Mobile!! Let the flashing commence

Don't think this is a good idea; from what has been communicated the Modem for T-Mobile is different or has a different signature; you might end up with a brick. We we obviously won't find out unless we try. The problem is... you don't have an image to re-flash the T-Mobile version, so you might have to send it in.

im tempted to run this today on the tmobile model. how high is the risk of hard brick? will it leave me without fastboot if it doesnt work?
---------- Post added at 07:48 AM ---------- Previous post was at 07:47 AM ----------
dreinulldrei said:
Don't think this is a good idea; from what has been communicated the Modem for T-Mobile is different or has a different signature; you might end up with a brick. We we obviously won't find out unless we try. The problem is... you don't have an image to re-flash the T-Mobile version, so you might have to send it in.
Click to expand...
Click to collapse
apparently the flash to 9.0.5 in the other thread overwrites the modem anyway. its the criticals that dont overwrite. worst case im within my 14 days still, can alwasy return

dreinulldrei said:
Don't think this is a good idea; from what has been communicated the Modem for T-Mobile is different or has a different signature; you might end up with a brick. We we obviously won't find out unless we try. The problem is... you don't have an image to re-flash the T-Mobile version, so you might have to send it in.
Click to expand...
Click to collapse
I thought someone did dump a stock Tmo 9.0 out here?
---------- Post added at 02:20 PM ---------- Previous post was at 02:19 PM ----------
https://androidfilehost.com/?fid=11410963190603845445

SourPower said:
I thought someone did dump a stock Tmo 9.0 out here?
---------- Post added at 02:20 PM ---------- Previous post was at 02:19 PM ----------
https://androidfilehost.com/?fid=11410963190603845445
Click to expand...
Click to collapse
Yep, if a Dev can chime in that I won't be left with a hard brick and will be able to go back to TMobile firm atleastsr I'll jump. The only thing holding me back is that sim unlock and unlock bin. I don't wanna go thru that again if have to exchange.

SourPower said:
I thought someone did dump a stock Tmo 9.0 out here?
---------- Post added at 02:20 PM ---------- Previous post was at 02:19 PM ----------
https://androidfilehost.com/?fid=11410963190603845445
Click to expand...
Click to collapse
It's not how this tool works. A raw dump doesn't equal a flashable fastboot dump doesn't equal a msmdownloadtool ops file.
Edit: apparently you can't use the not equals symbol. I wrote a lengthy reply and it's gone. I'll write a shorter version.
My assumption is there is no version for the T-Mobile, but this will work for a full conversion. OP support will most likely not use this on the T-Mobile version and it's why we had to void our warranty when we unlocked the bootloader. They probably defer you to T-Mobile if you brick your phone. Now that being said, I bet this tool works just fine on the T-Mobile version and will turn it into a full international device capable of OTA updates and everything.
---------- Post added at 02:51 PM ---------- Previous post was at 02:43 PM ----------
strictlyphat said:
Yep, if a Dev can chime in that I won't be left with a hard brick and will be able to go back to TMobile firm atleastsr I'll jump. The only thing holding me back is that sim unlock and unlock bin. I don't wanna go thru that again if have to exchange.
Click to expand...
Click to collapse
One of three things will happen.
One, it will recognize it as the wrong device and won't flash at all.
Two, it will flash and you'll have a hard brick.
Three, it will flash and you'll have a fully converted International version.
If you have to return it to TMobile, you shouldn't have any issues returning it. A dead device is a dead device, the reps don't care. Also getting your new one unlocked should be no issue as all since you already had your first device unlocked. Just tell support that. Your device was unlocked and you had to RMA it. They will SIM unlock no problem. You will still have to wait 7 days for the unlock bin.

hartleyshc said:
It's not how this tool works. A raw dump doesn't equal a flashable fastboot dump doesn't equal a msmdownloadtool ops file.
Edit: apparently you can't use the not equals symbol. I wrote a lengthy reply and it's gone. I'll write a shorter version.
My assumption is there is no version for the T-Mobile, but this will work for a full conversion. OP support will most likely not use this on the T-Mobile version and it's why we had to void our warranty when we unlocked the bootloader. They probably defer you to T-Mobile if you brick your phone. Now that being said, I bet this tool works just fine on the T-Mobile version and will turn it into a full international device capable of OTA updates and everything.
Click to expand...
Click to collapse
Screw it. I'm gonna do this soon. Will report back

hartleyshc said:
It's not how this tool works. A raw dump doesn't equal a flashable fastboot dump doesn't equal a msmdownloadtool ops file.
Edit: apparently you can't use the not equals symbol. I wrote a lengthy reply and it's gone. I'll write a shorter version.
My assumption is there is no version for the T-Mobile, but this will work for a full conversion. OP support will most likely not use this on the T-Mobile version and it's why we had to void our warranty when we unlocked the bootloader. They probably defer you to T-Mobile if you brick your phone. Now that being said, I bet this tool works just fine on the T-Mobile version and will turn it into a full international device capable of OTA updates and everything.
---------- Post added at 02:51 PM ---------- Previous post was at 02:43 PM ----------
One of three things will happen.
One, it will recognize it as the wrong device and won't flash as at.
Two, it will flash and you'll have a hard brick.
Three, it will flash and you'll have a fully converted International version.
If you have to return it to TMobile, you shouldn't have any issues returning it. A dead device is a dead device, the reps don't care. Also getting your new one unlocked should be no issue as all since you already had your first device unlocked. Just tell support that. Your device was unlocked and you had to RMA it. They will SIM unlock no problem. You will still have to wait 7 days for the unlock bin.
Click to expand...
Click to collapse
Wanna find out? I'll probably test in a few, lol.

hartleyshc said:
It's not how this tool works. A raw dump doesn't equal a flashable fastboot dump doesn't equal a msmdownloadtool ops file.
Edit: apparently you can't use the not equals symbol. I wrote a lengthy reply and it's gone. I'll write a shorter version.
My assumption is there is no version for the T-Mobile, but this will work for a full conversion. OP support will most likely not use this on the T-Mobile version and it's why we had to void our warranty when we unlocked the bootloader. They probably defer you to T-Mobile if you brick your phone. Now that being said, I bet this tool works just fine on the T-Mobile version and will turn it into a full international device capable of OTA updates and everything.
---------- Post added at 02:51 PM ---------- Previous post was at 02:43 PM ----------
One of three things will happen.
One, it will recognize it as the wrong device and won't flash as at.
Two, it will flash and you'll have a hard brick.
Three, it will flash and you'll have a fully converted International version.
If you have to return it to TMobile, you shouldn't have any issues returning it. A dead device is a dead device, the reps don't care. Also getting your new one unlocked should be no issue as all since you already had your first device unlocked. Just tell support that. Your device was unlocked and you had to RMA it. They will SIM unlock no problem. You will still have to wait 7 days for the unlock bin.
Click to expand...
Click to collapse
Cuz I'm assuming it's the same as Samsung. One hardware multiple softwares.
---------- Post added at 02:54 PM ---------- Previous post was at 02:53 PM ----------
Dark Nightmare said:
Wanna find out? I'll probably test in a few, lol.
Click to expand...
Click to collapse
Dude I will owe you one. Ur much braver than I. If my son falls asleep I'm trying to. PLEASE LET ME KNOW. And please let me buy u a beer lmfao

strictlyphat said:
Screw it. I'm gonna do this soon. Will report back
Click to expand...
Click to collapse
Guess I'll wait on your results...

Dark Nightmare said:
Guess I'll wait on your results...
Click to expand...
Click to collapse
I'm.having doubts man. Lol. What's your input. How likely I hard brick?

strictlyphat said:
I'm.having doubts man. Lol. What's your input. How likely I hard brick?
Click to expand...
Click to collapse
Since this will flash criticals, very likely, don't worry, my download is almost complete, I'll test it since my 6T is my spare device.

Dark Nightmare said:
Since this will flash criticals, very likely, don't worry, my download is almost complete, I'll test it since my 6T is my spare device.
Click to expand...
Click to collapse
Ah u r king. I had a backup iPhone til my daughter destroyed hers.

strictlyphat said:
Ah u r king. I had a backup iPhone til my daughter destroyed hers.
Click to expand...
Click to collapse
it fails, they do have a signature difference after all, I'm thinking we have to flash criticals/persist before this would work...maybe.

Dark Nightmare said:
it fails, they do have a signature difference after all, I'm thinking we have to flash criticals/persist before this would work...maybe.[/QUOTE
oof that sucks. thanks again
Click to expand...
Click to collapse

Safe flashing to anyone taking the plunge!

Dark Nightmare said:
it fails, they do have a signature difference after all, I'm thinking we have to flash criticals/persist before this would work...maybe.
Click to expand...
Click to collapse
tried it for good measure, same error

iaTa said:
This tool can be used to revive a bricked OP6T and remove the 'Device is corrupt' error message on boot.
Contains the latest MsmDownloadTool v4.0.58 and OOS v9.0.5 and is compatible with the non T-mobile international models (T-mobile compatibility currently unknown).
Make sure that your phone is switched off.
Open device manager on your Windows PC.
Press and hold the Volume Up & Volume Down buttons then connect to your PC using your data cable.
Once the device is connected to your Windows PC, check if the phone is being recognized (Other > QUSB_BULK or Ports > Qualcomm).
If showing as Other > QUSB_BULK either wait for Windows to install the Qualcomm driver or download the driver below and install.
Run MsmDownloadTool V4.0_factory.exe and click Start.
NOTE: This will completely wipe your device and relock your bootloader.
Downloads
MsmDownloadTool: https://androidfilehost.com/?fid=11410963190603846961
Driver: https://androidfilehost.com/?fid=24052804347798730
Shameless plug - my OP referral link for any peops that would like $20/£20/€20 discount: https://www.oneplus.com/invite#EC5BZVULJDUUO22
Click to expand...
Click to collapse
Oh my God you just saved my life brother. Thank you so much.

Dark Nightmare said:
it fails, they do have a signature difference after all, I'm thinking we have to flash criticals/persist before this would work...maybe.
Click to expand...
Click to collapse
Sad days... Appreciate the risks you've taken tho!!

[TOOL] 6T MsmDownloadTool V4.0 (HOS 9.0.4)

This tool can be used to revive a bricked OP6T China variants and remove the 'Device is corrupt' error message on boot.
Same with international version but this will bring back the China variants to Hydrogen OS v9.0.4. This was taken from Oneplus China forum.
Contains the latest MsmDownloadTool v4.0.58 and Hydrogen OS v9.0.4 and is not compatible with T-mobile models and also I didn't tested with International models(This may work so Proceed at Your Own Risk)
Make sure that your phone is switched off.
Open device manager on your Windows PC.
Press and hold the Volume Up & Volume Down buttons then connect to your PC using your data cable.
Once the device is connected to your Windows PC, check if the phone is being recognized (Other > QUSB_BULK or Ports > Qualcomm).
If showing as Other > QUSB_BULK either wait for Windows to install the Qualcomm driver or download the driver below and install.
Run MsmDownloadTool V4.0_factory.exe and click Start.
NOTE: This will completely wipe your device and re-lock your bootloader.
Downloads
MsmDownloadTool: DELETED
Driver: DELETED

If anyone uses this, can you make a full device dump please? Wanna mess with the OS, see what its like.

Is it confirmed not working on T-Mobile variant? I like h20s on my 6, wouldn’t mind it in my 6t.

strictlyphat said:
Is it confirmed not working on T-Mobile variant? I like h20s on my 6, wouldn’t mind it in my 6t.
Click to expand...
Click to collapse
It’s basically a different OS variant for the global 6T as they can switch between either OS without issue, since the global OOS MSMDOWNLOADTOOL won’t work with the T-Mobile variant, this definitely won’t.

Dark Nightmare said:
If anyone uses this, can you make a full device dump please? Wanna mess with the OS, see what its like.
Click to expand...
Click to collapse
This could work on International Version but won't tested, same as Oneplus 6 before. I wanna do it for you but seem have no time
strictlyphat said:
Is it confirmed not working on T-Mobile variant? I like h20s on my 6, wouldn’t mind it in my 6t.
Click to expand...
Click to collapse
Sure, it will not work on T-Mobile variant, even International version

Anybody tested this tool on A6013 international? Does it work?
Sent from my ONEPLUS 6T using Tapatalk

anyone try to use this tool to flash to hydrogen from oxygen on international?
EDIT, i took the plunge because i want to rid myself of google. i installed fdroid and this tool and rom are working great for those interested

Dark Nightmare said:
It’s basically a different OS variant for the global 6T as they can switch between either OS without issue, since the global OOS MSMDOWNLOADTOOL won’t work with the T-Mobile variant, this definitely won’t.
Click to expand...
Click to collapse
What about the modded msmdownloadtool that they use to flash the T-Mobile 6t to global without unlocked bootloader
This is the tool in talking about
https://forum.xda-developers.com/oneplus-6t/how-to/t-mobile-6t-to-international-t3888307

Here you go I installed this on my 6t with no issues at all its the international version I don't have the T-Mobile version and I still get updates and all and yes play store works fine..
edit: i unlocked the bootloader as well no issues will report back once ive rooted
edit 2: i was able to update to 9.0.11 perfectly fine with no issues and ive rooted without problems as well

Question 1: If I've got the Chinese OnePLus 6T that originally came with HOS, and I bricked it, can is use the MSM tool with OOS when I restore?
Question 2: The files in the original post on this thread are no longer available --is there a Hydrogen OS MSM tool for the OnePlus 6T floating around now, in 2021?
Any help you can offer would be sincerely appreciated --had the phone for a single day before I muddled it up.

ghoster76 said:
This tool can be used to revive a bricked OP6T China variants and remove the 'Device is corrupt' error message on boot.
Same with international version but this will bring back the China variants to Hydrogen OS v9.0.4. This was taken from Oneplus China forum.
Contains the latest MsmDownloadTool v4.0.58 and Hydrogen OS v9.0.4 and is not compatible with T-mobile models and also I didn't tested with International models(This may work so Proceed at Your Own Risk)
Make sure that your phone is switched off.
Open device manager on your Windows PC.
Press and hold the Volume Up & Volume Down buttons then connect to your PC using your data cable.
Once the device is connected to your Windows PC, check if the phone is being recognized (Other > QUSB_BULK or Ports > Qualcomm).
If showing as Other > QUSB_BULK either wait for Windows to install the Qualcomm driver or download the driver below and install.
Run MsmDownloadTool V4.0_factory.exe and click Start.
NOTE: This will completely wipe your device and re-lock your bootloader.
Downloads
MsmDownloadTool: [url]https://drive.google.com/open?id=1FCTK748dkMhHAC6CriNKgDeDbXFbmHrZ[/URL]
Driver: [url]https://drive.google.com/open?id=1Y5LHVIjzLhxMLIS4dTTm5BGiEfff6cqK[/URL]
Click to expand...
Click to collapse
Can you repost the link bro. To download
https://drive.google.com/open?id=1FCTK748dkMhHAC6CriNKgDeDbXFbmHrZ

Can anybody repost a working link to the hydrogen os file.

Anyone there bro

Korea region V40, can I flash to European firmware?

Hello,
I have a LM-V409N here. It has some Korean bloatware but worse than that, even though the phone is set to English, a lot of things are still in Korean. For example an available software update description is in Korean. Buttons in the phone app show Korean text, etc.
Can I flash a European firmware on to this model? Will that 'just work'?
I hope someone can help me with this.
Thank you,

Rooted? you won't get far otherwise. Had the same problem on my korean G5.
On a rooted device though, you can edit the build.prop locale to your native region to turn off the korean elements of the UI and obviously remove the bloat.
some of the bloat can be disabled even if uninstall isn't allowed. Carrier specific ones can't unfortunately.
Flashing wise, iirc that's a no go as it will break radio. No signal afterwards. At least that was the problem on the V35.

Thank you so much for your reply. This makes me worry a bit less
No I don't have it rooted (yet). I will go figure out how to do that for this phone model and then if I can't find out how to do the build.prop changes I will come back here to ask for help
Do you have any idea why WiFi HotSpot is not working properly? Laptops and other phones just don't see the SSID and when trying to setup a 5GHz hotspot, the slider hangs when you turn it on (turns gray and freezes) and you have to reboot the phone to get it enabled again. But it will only turn on when on 2.4GHz.
If I can get all the Korean stuff to disappear, flashing won't be necessary anymore So let me get to finding that out!
Let's first see if flashing fixes anything.
Thank you so much once again!
Edit: Come to think of it, when I turn on the phone it shows an SK Telecom animation and sound (some Korean carrier I guess) and I would like that removed as well..
I guess the only way to get that removed is to flash another firmware? Would you know a firmware version for this LM-V409N which is just 'LG original' without any carrier/provider customization?
Thank you!
Edit2: OK, I found out how I can flash a stock firmware using the LGUP tool. However, this fails at the beginning of the process because of an 'Initialize' error.
I suspect I need the device to be rooted before flashing..? I could find how to flash pretty easily, but how to root..?
Can anyone point me to a guide for rooting the V40?
Thanks!

No, you don't need root. Just search here on xda for crossflash word. In the g7 forum I have made an tutorial. You will need lg drivers, com port, lg up and common. DLL for v40. For g7 it works like a charm. Be sure to check and compare GSM bands from Korea to EU. For g7 they was the same.

Inerent said:
No, you don't need root. Just search here on xda for crossflash word. In the g7 forum I have made an tutorial. You will need lg drivers, com port, lg up and common. DLL for v40. For g7 it works like a charm. Be sure to check and compare GSM bands from Korea to EU. For g7 they was the same.
Click to expand...
Click to collapse
OK, did all that. LGUP starts up, detects my LM-V409N correctly.
I select the KDZ file, set it to UPGRADE and click START.
Now it gives me the error 'LGUP Framework must be 1.16'. I have 1.14 apparently and I can't find 1.16 anywhere.
I read something about "If you do have some knowledge to bypass the LGUP Version Check on this DLL, then You can sideload kdz firmware onto your LG V40 ThinQ with LGUP 1.14." on this site: https://www.mylgphones.com/lgup-dll-for-lg-v40-thinq-version1-9-39-7.html
But again, I can't find anything about how to bypass that version check.
I tried with LGUP_common.dll versions 1.9.39.7 and 1.0.39.10. Both same result (need 1.16).
Also tried with 0.0.3.23 but that one gives the "Initialize" error after clicking START.
Any other tips or tricks you can suggest?
Thank you,

AzzKickah said:
OK, did all that. LGUP starts up, detects my LM-V409N correctly.
I select the KDZ file, set it to UPGRADE and click START.
Now it gives me the error 'LGUP Framework must be 1.16'. I have 1.14 apparently and I can't find 1.16 anywhere.
I read something about "If you do have some knowledge to bypass the LGUP Version Check on this DLL, then You can sideload kdz firmware onto your LG V40 ThinQ with LGUP 1.14." on this site: https://www.mylgphones.com/lgup-dll-for-lg-v40-thinq-version1-9-39-7.html
But again, I can't find anything about how to bypass that version check.
I tried with LGUP_common.dll versions 1.9.39.7 and 1.0.39.10. Both same result (need 1.16).
Also tried with 0.0.3.23 but that one gives the "Initialize" error after clicking START.
Any other tips or tricks you can suggest?
Thank you,
Click to expand...
Click to collapse
Hello.
I told you to look in g7 forum for crossflash. You will need lg up 1.15 and follow the exact steps. Beware it may brick your device, so I'm not responsible.
Link here https://forum.xda-developers.com/lg...ash-oreo-pie-firmwares-lg-g7-g7-t3915303/amp/
Warning!!! Pay attention not to download the common. DLL from there as it is for lg g7. You must download for your v40. Also for your firmware. Also you will loose your data, so backup first if you have important files, sms, etc.

Inerent said:
Hello.
I told you to look in g7 forum for crossflash. You will need lg up 1.15 and follow the exact steps. Beware it may brick your device, so I'm not responsible.
Link here https://forum.xda-developers.com/lg...ash-oreo-pie-firmwares-lg-g7-g7-t3915303/amp/
Warning!!! Pay attention not to download the common. DLL from there as it is for lg g7. You must download for your v40. Also for your firmware. Also you will loose your data, so backup first if you have important files, sms, etc.
Click to expand...
Click to collapse
OK so for my clarification, this method is how to bypass the version check? (If yes, I will go try this).
Or is this a separate method? (If it is separate, I'm afraid to brick it and I will not try it).
Thank you so much for your help. It really is very much appreciated.

AzzKickah said:
OK so for my clarification, this method is how to bypass the version check? (If yes, I will go try this).
Or is this a separate method? (If it is separate, I'm afraid to brick it and I will not try it).
Thank you so much for your help. It really is very much appreciated.
Click to expand...
Click to collapse
Yes, this is for bypassing the obsolete lg up 1.14.
But 1.15 will not work if you open it, it will ask you for developer user and password. But there is a hack with using cmd line. Follow my steps.
I repeat again, if there is a working DLL for lg v40 and if 40 supports crossflashing (highly it does) then you're good to go. Don't forget to check what is your com port when your v40 is connected in download mode.
---------- Post added at 11:39 AM ---------- Previous post was at 11:33 AM ----------
If you're connected to a USB 3.0 port and have quality USB c cable, it should install it in less than 1 minute
---------- Post added at 11:47 AM ---------- Previous post was at 11:39 AM ----------
Here is a little tutorial for V40
Easy commands for this new LGUP v1.15.06
If using powershell from win10:
1. Install USB drivers and put V40 in download mode - connect it to USB cable then go and check your COM port in windows device manger
2. Open powershell from C:\Program Files (x86)\LG Electronics\LGUP (shift + right mouse) and type cmd and hit enter.
3. Type this command: lgup_cmd.exe comX "C:\Program Files (x86)\LG Electronics\LGUP\model\common\LGUP_Common.dll" "(path to your kdz firmware)"
Example: (if your phone is under com5 and your kdz is located in D:\ and has this name XXX.kdz)
lgup_cmd.exe com5 "C:\Program Files (x86)\LG Electronics\LGUP\model\common\LGUP_Common.dll" "D:\XXX.kdz"
Links:
LGUP new version - https://drive.google.com/file/d/1dJZ...jumm5mtKp/view
LGUP common.dll for V40 - you must download it.
Firmwares: https://lg-firmwares.com/
European firmwares for V40 - https://lg-firmwares.com/lg-lmv405ebw-firmwares/#tab=firmwares

[/COLOR]Here is a little tutorial for V40
Easy commands for this new LGUP v1.15.06
If using powershell from win10:
1. Install USB drivers and put V40 in download mode - connect it to USB cable then go and check your COM port in windows device manger
2. Open powershell from C:\Program Files (x86)\LG Electronics\LGUP (shift + right mouse) and type cmd and hit enter.
3. Type this command: lgup_cmd.exe comX "C:\Program Files (x86)\LG Electronics\LGUP\model\common\LGUP_Common.dll" "(path to your kdz firmware)"
Example: (if your phone is under com5 and your kdz is located in D:\ and has this name XXX.kdz)
lgup_cmd.exe com5 "C:\Program Files (x86)\LG Electronics\LGUP\model\common\LGUP_Common.dll" "D:\XXX.kdz"
Links:
LGUP new version - https://drive.google.com/file/d/1dJZ...jumm5mtKp/view
LGUP common.dll for V40 - you must download it.
Firmwares: https://lg-firmwares.com/
European firmwares for V40 - https://lg-firmwares.com/lg-lmv405ebw-firmwares/#tab=firmwares
Click to expand...
Click to collapse
It worked!! :laugh:
You are the best. THANK YOU for your help!
Damn that was scary to watch that percentage creep up towards 100%

AzzKickah said:
It worked!! :laugh:
You are the best. THANK YOU for your help!
Damn that was scary to watch that percentage creep up towards 100%
Click to expand...
Click to collapse
What dll did you used? and from where did you find the information that the dll is correct? please links. :angel:

Inerent said:
What dll did you used? and from where did you find the information that the dll is correct? please links. :angel:
Click to expand...
Click to collapse
DLL: https://drive.google.com/file/d/1qKRlOFVZMIanphD-jp6dxenCqkaZP2Zc/view?usp=sharing
Information/details: https://www.mylgphones.com/lgup-dll-for-lg-v40-thinq-version1-9-39-7.html
Firmware: https://lg-firmwares.com/lg-lmv409n-firmwares/#tab=firmwares

AzzKickah said:
DLL: https://drive.google.com/file/d/1qKRlOFVZMIanphD-jp6dxenCqkaZP2Zc/view?usp=sharing
Information/details: https://www.mylgphones.com/lgup-dll-for-lg-v40-thinq-version1-9-39-7.html
Firmware: https://lg-firmwares.com/lg-lmv409n-firmwares/#tab=firmwares
Click to expand...
Click to collapse
So you didn't flashed the European firmware?

Inerent said:
So you didn't flashed the European firmware?
Click to expand...
Click to collapse
No I didn't. Neocyke told me that radio wouldn't work that way so that would have been useless then. This is the post: https://forum.xda-developers.com/showpost.php?p=80177222&postcount=2
Or did he mean FM Radio......? Because I could live without FM Radio.
The one I did flash is still Korean, but it has no carrier customization. No cellular provider specific apps, no Korean company logo's at startup.
Only thing I noticed is that there still are Korean characters showing right below the numbers in the phone dialer app. But it also shows ABC, DEF, etc.
Oh, and a second clock showing Korean time on the lock screen :silly: which I can't find out how to turn off

AzzKickah said:
No I didn't. Neocyke told me that radio wouldn't work that way so that would have been useless then. This is the post: https://forum.xda-developers.com/showpost.php?p=80177222&postcount=2
Or did he mean FM Radio......? Because I could live without FM Radio.
The one I did flash is still Korean, but it has no carrier customization. No cellular provider specific apps, no Korean company logo's at startup.
Only thing I noticed is that there still are Korean characters showing right below the numbers in the phone dialer app. But it also shows ABC, DEF, etc.
Oh, and a second clock showing Korean time on the lock screen :silly: which I can't find out how to turn off
Click to expand...
Click to collapse
I also have that clock on my V50.
For me it worked with my g7+ Hong Kong international to European and also got volte amd vowifi.
Yes, he was referring to the GSM radio. So this will be risky.
Maybe you should not try. You can check if someone did it with G7....
I also have remembered that I cross flashed my G7 from HK to European, to Korean, back and fourth between them and all was fine.
---------- Post added at 06:16 PM ---------- Previous post was at 05:58 PM ----------
Maybe the V line from LG is risky about radios. Or maybe that was on V35. My point is that this is very risky an you should assume responsibility if flashing. Maybe it's better do not try it.

Inerent said:
I also have that clock on my V50.
For me it worked with my g7+ Hong Kong international to European and also got volte amd vowifi.
Yes, he was referring to the GSM radio. So this will be risky.
Maybe you should not try. You can check if someone did it with G7....
I also have remembered that I cross flashed my G7 from HK to European, to Korean, back and fourth between them and all was fine.
---------- Post added at 06:16 PM ---------- Previous post was at 05:58 PM ----------
Maybe the V line from LG is risky about radios. Or maybe that was on V35. My point is that this is very risky an you should assume responsibility if flashing. Maybe it's better do not try it.
Click to expand...
Click to collapse
You seem to contradict yourself, or do I misunderstand?
You can check if someone did it with G7....
I also have remembered that I cross flashed my G7 from HK to European, to Korean
Click to expand...
Click to collapse
Why check if someone did it if you already did?
I will see how it goes with this firmware for a week or two. If it is all fine, I'll leave it like this.
I don't suspect it will brick the phone though if I flash a European firmware.. As long as you can get into Download-mode, there is not much to worry about I think

AzzKickah said:
You seem to contradict yourself, or do I misunderstand?
Yes, I am also confused.
Why check if someone did it if you already did?
I didn't do it from Korean to European.
I will see how it goes with this firmware for a week or two. If it is all fine, I'll leave it like this.
I don't suspect it will brick the phone though if I flash a European firmware.. As long as you can get into Download-mode, there is not much to worry about I think
For this I was confused. I do believe 50% that it can be done without problems.
Click to expand...
Click to collapse
Anyway, the benefits for European are many. Volte, vowifi, less bloatware, faster speed.
Half of me is screaming to DO IT, while the other half is paranoic!

Inerent said:
Anyway, the benefits for European are many. Volte, vowifi, less bloatware, faster speed.
Click to expand...
Click to collapse
Faster speed..? Please elaborate.
It shows LTE in the status bar though. But I don't know if that is VoLTE.
Now you're making me doubt if I should try a European firmware....
Half of me is screaming to DO IT, while the other half is paranoic!
Click to expand...
Click to collapse
I'm feeling exactly the same right now :laugh:

AzzKickah said:
Faster speed..? Please elaborate.
It shows LTE in the status bar though. But I don't know if that is VoLTE.
Now you're making me doubt if I should try a European firmware....
Click to expand...
Click to collapse
Yes, for my G7 it was faster speeds. Better battery life also.

Inerent said:
Yes, for my G7 it was faster speeds. Better battery life also.
Click to expand...
Click to collapse
What do you think, would this be a good one to try?
V405EBW20a_00_OPEN_EU_DS_0524.kdz
LM-V405EBW...? On my LM-V409N, would that go..?

AzzKickah said:
What do you think, would this be a good one to try?
V405EBW20a_00_OPEN_EU_DS_0524.kdz
LM-V405EBW...? On my LM-V409N, would that go..?
Click to expand...
Click to collapse
I'll search what country has better laws regarding government spying on people. And that firmware I'll choose. Maybe it's the UK, I know that it has forbidden StingRays. Also Deutschland seems OK.

[OP7TPRO][OOS HD01AA | HD01BA] Unbrick tool to restore your device to OxygenOS

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO and OP7T here are the EDL packages (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7T Pro.
They can also be used to rollback your phone to a previous release of OOS.
You can download the following versions:
HD01AA tools (International and indian firmware):
ANDROID 10:
10.0.3
10.0.4
10.0.5
10.0.7
10.0.8
10.0.11
10.0.12
10.0.13
10.0.14
ANDROID 11:
11.0.5.1
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
HD01BA tools (European firmware):
ANDROID 10:
10.0.3
10.0.4
10.0.5
10.0.7
10.0.8
10.0.9
10.0.11
10.0.13
ANDROID 11:
11.0.5.1
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
It should work with HD1910 (Chinese variant), HD1911 (Indian variant), HD1913 (EU variant) and HD 1917 (North America) models.
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device
FAQ:
I see a target button, what is that?
As you may (or may not!) be aware there are starting from 7T-Series build specifics to India.
If you use HD01AA tool, selecting "O2" as target should give you the global firmware while selecting "India" as target should give you the Indian one. See
https://imgur.com/2ipNyIy
for a screenshot.
If you use HD01BA tool, selecting "EU" should give you the EU firmware.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked in first part of this FAQ.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
How can I fix "SMT config not found" error?
Please refer to https://forum.xda-developers.com/showpost.php?p=83448961&postcount=61, all credits to @Shadow12347 for finding it out.
Credits:
@Miccia for sharing original link from OnePlus for 10.0.3 HD01AA tool and for sharing decrypted 10.0.3 HD01BA tool
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS
Related: Repo of OxygenOS builds.

Reserved

Reserved

Related: Repo of OxygenOS builds.

Thanks op I'm going to need this at some point ?

I've always loved the presence of EDL mode in OnePlus phones, if you like tinkering you always run the risk of a brick.
Thanks for releasing this, amazing work!

I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA

Neurom67 said:
I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA
Click to expand...
Click to collapse
Me too, let hope Mclarem tool pop up for EU version HD1913

Neurom67 said:
I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA
Click to expand...
Click to collapse
I believe the ROMs are the same, in which case this tool would also work on the Mclaren edition.

danieldmm said:
Me too, let hope Mclarem tool pop up for EU version HD1913
Click to expand...
Click to collapse
Hey Daniel. Good to see you here. Hope we will soon see your Tugapower ROMs for this device

Hi. Thank you for this tool. I'm not very familiar with this kind of stuff. I'm wondering. Can this be used as a ROM installation tool? I want to install OOS coming from HOS. But I cannt do a local update because the current HOS version is higher than OOS.

Neurom67 said:
I waiting for Mclaren Edition
Oxygen OS 10.0.3 HD01BA
Click to expand...
Click to collapse
danieldmm said:
Me too, let hope Mclarem tool pop up for EU version HD1913
Click to expand...
Click to collapse
As said in post #9, normally it should work with EU McLaren as well.
ZaryaMain said:
Hi. Thank you for this tool. I'm not very familiar with this kind of stuff. I'm wondering. Can this be used as a ROM installation tool? I want to install OOS coming from HOS. But I cannt do a local update because the current HOS version is higher than OOS.
Click to expand...
Click to collapse
Yes you can. Note that however it will wipe all data present on your device.

Some_Random_Username said:
As said in post #9, normally it should work with EU McLaren as well.
Yes you can. Note that however it will wipe all data present on your device.
Click to expand...
Click to collapse
Thank you. Thats fine. One more thing. Do I need to root the device? Or following your instruction on first post is sufficient.

ZaryaMain said:
Thank you. Thats fine. One more thing. Do I need to root the device? Or following your instruction on first post is sufficient.
Click to expand...
Click to collapse
Following instructions on first post is enough

Some_Random_Username said:
Following instructions on first post is enough
Click to expand...
Click to collapse
Do I need to select any specific mode in the EDL mode or just left it alone? I followed your instruction but nothing happened. status of connection is N/A and status of communication has been waiting for devices for long time.
---------- Post added at 05:48 AM ---------- Previous post was at 05:04 AM ----------
Some_Random_Username said:
Following instructions on first post is enough
Click to expand...
Click to collapse
I just realized that I got into fastboot mode instead of the edl mode. And hold volume up and down keys doesnt seem to work...
---------- Post added at 06:15 AM ---------- Previous post was at 05:48 AM ----------
ZaryaMain said:
Do I need to select any specific mode in the EDL mode or just left it alone? I followed your instruction but nothing happened. status of connection is N/A and status of communication has been waiting for devices for long time.
---------- Post added at 05:48 AM ---------- Previous post was at 05:04 AM ----------
I just realized that I got into fastboot mode instead of the edl mode. And hold volume up and down keys doesnt seem to work...
Click to expand...
Click to collapse
update: I got into edl via adb and switched from HOS to OOS. My phone is mclaren edition and it works the same. Everything is nice and smooth.
Thank you so much! @Some_Random_Username

Can I brush my device from HD1910 to HD1913 or something else?
Sorry My English!!!

Some_Random_Username said:
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO and OP7T here is the EDL package (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7T Pro.
It can also be used to rollback your phone to a previous release of OOS.
You can download it here: https://www.androidfilehost.com/?fid=4349826312261628475
It should work with HD1910 (Chinese variant), HD1911 (Indian variant), 1913 (EU variant) and HD 1917 (North America) models.
After use, your device will be restored to OOS 10.0.3.
Instructions:
Power your device off
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Launch MsmDownloadTool V4.0.exe.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds
Enjoy your brand new device
Click to expand...
Click to collapse
Hi thank you for the awesome work. I wanted to say what about when your device is bricked that the only function is an error message "Your device Is corrupt. It can't be trusted and will not boot.
When you have power button and volume down the screen goes black you think it powered off, you try to manually go into bootloader mode just to have the error message again and stays in a loop. There is no recognition on my PC except for a minute when you connect sound very rapidly it disconnects and then it's just dead except for the error loop.
My phone is brand new barely had barely a day and a half. Is there any fix for the phone it's an HD1910. Please help thank you.

slapman said:
Hi thank you for the awesome work. I wanted to say what about when your device is bricked that the only function is an error message "Your device Is corrupt. It can't be trusted and will not boot.
When you have power button and volume down the screen goes black you think it powered off, you try to manually go into bootloader mode just to have the error message again and stays in a loop. There is no recognition on my PC except for a minute when you connect sound very rapidly it disconnects and then it's just dead except for the error loop.
My phone is brand new barely had barely a day and a half. Is there any fix for the phone it's an HD1910. Please help thank you.
Click to expand...
Click to collapse
What about opening tool on your computer, maintaining power button to force your device to turn off, getting back into EDL, plug to your PC and press Start button on tool window as soon as possible?

Added HD01BA tool to go back to EU firmware, credit goes to @Miccia for sharing it

Hi. I am going to go from hydrogen ram to global oxygen ram. Can I use this method to do this? Because the Global Ram has not come yet

[OP7PRO 5G EU][OOS 9.5.11 GM27BA] Unbrick tool to restore your device to OxygenOS

Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, finally, almost one year after this device release date and similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO, regular OP7T, T-Mobile OP7T, regular OP7TPRO and T-Mobile OP7TPRO 5G here is the EDL package (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7 Pro 5G EU bough from EE in UK or Elisa in Finland.
It can also be used to rollback your phone to a previous release of OOS if for some reason you want to go back to an older firmware
It will only work with 5G EU variant GM1920
You can download the following version:
ANDROID 9:
9.5.11 GM27BA
Mirror for first and last MSMs per Android version: https://onepluscommunityserver.com/
Instructions:
Launch MsmDownloadTool V4.0.exe.
Power your device off.
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Credits:
@jkebwdn for getting 9.5.11 version from OnePlus
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
Votton for providing a server as an alternative mirror
OnePlus for the device and OS

Related: [CROSSFLASH/RESTORE] [Sprint 5G] Sprint OnePlus 7 Pro 5G to EU FW and back[10] by @Whoareyou

Thanks
Dear friend, you are an angel.
Im so so thankfull for this, you deserve all in this world. People like you are amaizing.
Greetings from Portugal, and thank you. i tilted with bricked phone .
Give me your paypall to donate.
Some_Random_Username said:
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been modified before it was cool.
Hi everyone, finally, almost one year after this device release date and similar to the previous threads for
OP3, OP3T, OP5, OP5T, OP6, OP6T, OP7, OP7PRO, regular OP7T, T-Mobile OP7T, regular OP7TPRO and T-Mobile OP7TPRO 5G here is the EDL package (also known as MSM tool or unbrick tool) that can revive a bricked OnePlus 7 Pro 5G EU bough from EE in UK or Elisa in Finland.
It can also be used to rollback your phone to a previous release of OOS if for some reason you want to go back to an older firmware
It will only work with 5G EU variant GM1920
You can download the following version:
ANDROID 9:
9.5.11 GM27BA
Instructions:
Launch MsmDownloadTool V4.0.exe.
Power your device off.
Maintain volume up and volume down keys to get into Qualcomm EDL mode.
Plug your device to your computer using stock OnePlus cable.
Click on Enum to be sure your device is detected and press Start.
Wait ~300 seconds.
Enjoy your brand new device.
FAQ:
Does this work on Mac or on Linux?
Unfortunately no, tool is Windows only. You should need at least Windows 7.
My device isn't detected when I click on "Enum" button
Go to device manager and make sure your phone shows up as QDLOADER 9008.
If it shows up as QHUSB_BULK, it means Qualcomm driver wasn't installed automatically by Windows Update. Download the latest one from Microsoft website at http://download.windowsupdate.com/c..._fba473728483260906ba044af3c063e309e6259d.cab (source https://www.catalog.update.microsof...updateid=8ee52ba0-bdef-4009-88cf-335a678dd67a ) and install it manually by right clicking on QHUSB_BULK and selecting "Update driver software" and "Browse my computer for driver software" to where you downloaded CAB file.
MSM tool is stuck on "Param pre-processing"
Ensure you're using the Qualcomm drivers linked above.
MSM tool is stuck on "Sahara communication failed"
Unplug your phone, get in fastboot mode, turn off phone, wait 15 secondes and get back in Qualcomm EDL mode. You can also try using a USB 2.0 port instead of a 3.0 one.
What is SMT Download mode?
Just don't try to unlock that mode, it will wipe your IMEI and your Widevine certificate if you use it.
Credits:
@jkebwdn for getting 9.5.11 version from OnePlus
@Titokhan for being a friend and providing inspiration in writing
@headsh0t95 for being a friend and suggesting me to request an access to upload files on AndroidFileHost now one year ago for my previous threads
@AndroidFileHost for the hosting
OnePlus for the device and OS
Click to expand...
Click to collapse

tbarrosaugustoo said:
Dear friend, you are an angel.
Im so so thankfull for this, you deserve all in this world. People like you are amaizing.
Greetings from Portugal, and thank you. i tilted with bricked phone .
Give me your paypall to donate.
Click to expand...
Click to collapse
Hemm thanks but it was a team work as I wrote in the credits part
But if you're really sure you can find my PayPal email under my profile picture when you view forum from desktop

Sorry to bring up an old thread. Just wanted to know if you know where I can find the firmware to flash the 4g global version that works on the EE UK 5g phone.
I have the UK EE 5g GM1920 version and would like to load the global 4g version on it to enable the dual sim. I don't use 5g and don't care if it doesn't work.

will this unlock sim?

M1r4j said:
Sorry to bring up an old thread. Just wanted to know if you know where I can find the firmware to flash the 4g global version that works on the EE UK 5g phone..
Click to expand...
Click to collapse
Unfortunately you can't flash 4G global version on EE UK variant.
i'm.god said:
will this unlock sim?
Click to expand...
Click to collapse
I believe 5G EU variant shouldn't be SIM locked.