Related
I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks
This is why you have to be extra careful while flashing something.. hope you find a solution
kalebwinefield said:
I accidentally flashed a MiUI 10 ROM with miflash onto my CC9 which has bricked my phone as it was previously on MiUI 11. My bootloader is now locked because I accidentally checked that option in miflash so I can't just fastboot flash another working ROM. I tried putting the phone into EDL mode using the test pin method, however since I did that once, it will no longer go into EDL mode again. Is this normal?
If anyone knows or can point me in the direction of someone who can unbrick my phone it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Can you access fastboot mode? If so, you can try unlocking the bootloader again and installing the rom you want. If you haven't removed the mi account it will unlock and you don't even have to wait the required time again.
Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?
kalebwinefield said:
Unfortunately since I bought the phone off AliExpress, the seller had already unlocked it so their account is bound to the phone rather than mine. I have managed to get the phone to boot into EDL mode by the test point method but I don't have an edl authorised account to flash a working ROM. If anyone knows someone who could help me out with this I'm more than happy to pay them for their time ?
Click to expand...
Click to collapse
Download the latest fastboot firmware (MIUI 11) for your mi cc9 (not mi 9 lite). Don't grab the recovery.zip firmware, it's useless and will give you errors.
When you finish your download, unpack your .tar firmware twice and flash it with MiFlashTool while you are on fastboot mode. (Power/Vol-).
Next time, ask before flashing not after !
Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?
stinkyllamaXDA1 said:
Hello , how is it going?. I also have problem with my cc9 and tried to flash latest miui 10 v11.3.4.0 and now it's softbricked , I'm having problem with Mi Flash since it's showing lock state error. any fix for it?
Click to expand...
Click to collapse
What kind of firmware are you trying to flash trough MiFlash ? recovery.zip or fastboot ? Can you take screenshots so people can know what is your issue ? Without screenshot no one will help you here !
Cheers
I also same situation, does anyone know a good idea?
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english
irum94 said:
I also same situation, does anyone know a good idea?
I installed Global ROM in CC9(Chinese edition) device and the device BootLoader is locked.
When I used fastboot and miflashtool, I got a message "Unauthorized for this operation"
I tried to unlock it and I also get a message "please add your account in miui settings > developer options > mi unlock status"
But i can't get out of recovery mode so I can't change the settings.
I tried to unlock but failed and also attempts to flash in EDL mode failed.
Sorry for bad english
Click to expand...
Click to collapse
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write ?
Stefke93 said:
Few days ago my phone was totally dead, even charging not working. You need to flash firmware with edl authorized account in edl 9008 mode, firehose programator require verification before write
Click to expand...
Click to collapse
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?
irum94 said:
I've already tried to flash from edl mode. but I don't have an account with authority.
Is there any way to bypass verification ?
Click to expand...
Click to collapse
No until someone patch firehose for sdm710 ?
Mi 9 lite
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.
This guy helped me. He uses ultraviewer.net for remote connection. 1722 rubles for flashing.
MOD EDIT: Phone Number Removed
Le: how did you bricked it? I restored an older backup of android 9 over Android 10 from twrp. But from what I understand cc9 doesn't have rollback protection.
Le2: you can also try those fishy 710 firehose no Auth loaders you can find from various sources. Didn't worked for me but you can try.
If you flash Revolution OS or flash Android 9 over Android 10 rom you have good chance to hard brick device so you need to flash first fastboot rom if you want to go from 10 to 9
Thanks
friend @editheraven thank you very much for the contact, I spoke and yesterday I could flash my MI 9 lite I really appreciate it, thank you bro.
loc182 said:
I have a xiaomi mi 9 lite and it is in bootloop I try to turn it on and the MI logo appears for a second and it goes off I can't go into fastboot or recovery I already opened it to do test point and flash but it asks me for an authorized account If someone here has an authorized account that can lend me I will pay for the rental of the authorized account please help with that.
Click to expand...
Click to collapse
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank
chainorth said:
Me too.my 9 lite brick Mi logo then off.pls suggest for me.Thank
Click to expand...
Click to collapse
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.
editheraven said:
Download the fastboot firmware version and execute flash all. (not flash and lock).
I assume you have fastboot access.
Click to expand...
Click to collapse
it can't boot to fastboot or recovery mode.
chainorth said:
it can't boot to fastboot or recovery mode.
Click to expand...
Click to collapse
And no recovery? Only the splash screen?
editheraven said:
And no recovery? Only the splash screen?
Click to expand...
Click to collapse
yes .Mi logo 2 sec then screen off
Hello,
I was running unlocked bootloader and pixelexperience rom. Today I wanted to try to flash latest xiaomi.eu and now my phone is bricked.
Steps:
Twrp -
flashed data (after that i saw that i had an error and data didn't flash)
installed rom (because i didn't see the error) - rom failed to install
flashed data again from twrp advanced option
phone rebooted and now it bootloops on mi logo. i do not have recovery nor fastboot.
what can I do in this situation? i searched the forum but there is nothing similar
You must have fastboot, check how install miui using mi flash. I use this method and working for me
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Andrei221 said:
When I try to boot into fastboot, it only shows black screen. The PC does not recognise it.
Also, I do not have EDL mode available..
Click to expand...
Click to collapse
Exact same issue, no fastboot or EDL mode. Tried updating the latest Miui 11 - Android 10 - Xiaomi EU Rom (Jan 25th) and the phone has been bricked.
Solution Deleted.
got into EDL mode using test points, but now i have edl auth error - "cannot receive hello packet"
Seems like a common problem for bricked devices and need mi account with the right edl auth privileges.
Any help welcome.
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
DoYouWantFriesWithThat said:
There is nothing to do, unless:
A) you find a Xiaomi Authorized account (in which case please alert us)
B) you manage to hack the EDL mode and bypass the Authorization.
Tertium non datur.
EDIT: EDL is the only chance for you anyway @Andrei221
If you had fastboot you could get into EDL by running: "fastboot oem edl", but since you have no fastboot you're only left with the test-points or an EDL-cable.
Click to expand...
Click to collapse
you know hoe to bypass EDL authorization?
Leoleo96 said:
you know hoe to bypass EDL authorization?
Click to expand...
Click to collapse
No. I've tried different things:
- trying to flash with QPST in EDL mode (9008)
- trying to flash fastboot roms with various/ancient versions of MiFlash in EDL mode (9008)
- flashing standalone modem firmwares (old ones, new ones, non-ARB ones, packed with NON-HLOS, etc.) from TWRP
- doing a MITM on the response that MiFlash & MiFlash PRO get from https://update.miui.com/updates/miotaV3.php
- doing a MITM on MiFlash and redirecting requests to old URLs (https://update.miui.com/updates/miotaV2.php, https://update.miui.com/updates/miota.php) and black-box testing them
- using MobileEdit Forensic tool to exploit the EDL firmware
*Note*: I've obviously tried all the different FireHose programmers that are floating around (including those distributed by MobileEdit).
Nothing works.
Especially trying to modify the response (if one understood its format) could very well be useless because it could be that the response from update.miui.com is validated directly by the firmware itself (like a challenge-response authentication) - this has to be verified.
The only possibility I see for now is to flash the original Xiaomi Recovery, let it connect to MiFlash Pro (choosing option n.3 from the menu), and then using IdaPro to trick MiFlash Pro into telling the Recovery to flash the phone. It shouldn't be hard, and I think it *MIGHT* offer the possibility to bypass ARB & Authentication (but I might be wrong: it might be equivalent to flashing from Fastboot). That waits to be tested.
I hope this saves y'all from wasting time.
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
tarkusy said:
To flash or unbrick Xiaomi Mi 8 Lite, you'll need edl authentication to use the Mi Flash tool to complete this flashing operation. An authorized Service Account is required. This is the worst part of flashing the latest generation of Xiaomi android devices. I have had this problem before with MI 8 Lite. I stuck getting these error messages "Mi Flash Tool Unauthorized for this Operation - Your Account is Unauthorized for this operation - Authorized Service Account required"
This method works only for Mi 8 Lite
In this blog post, you'll find your solution to unbrick your MI 8 Lite
Mi 8 Lite Bypass Account Authorized Official Flashing
Xiaomi Mi 8 Lite Firmware Flashing Without Authentification. edl mi 8 lite authentication.Xiaomi Mi 8 Lite (Platina) Firehose File [No Need Auth]...
learnandsharegsm.blogspot.com
In this youtube video tutorial, you'll find the easy way to unbrick Mi 8 Lite
Click to expand...
Click to collapse
Any suggestion to un-brick mi8 and not mi8Lite?
I don't understand how to bypass EDL Account only coping a file on images folder
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
I tried that, but I am getting an error saying not allowed in locked state. It looks like the bootloader is locked, so I tried to use the Mi Unlock tool but I am getting error 1004. Also I tried wipe data, but it didn't work either. Right now, I don't care loss my data, I just want to have my phone back, any help is appreciated. Thanks
I have the exact same problem, after the update, lock on recovery mode, then when I tried to flash stock fastboot firmware it says that it is locked. And I also can't access Mi Unlock Tool for some reason, so if anybody has a solution to unlock bootloader I would really appreciate it.
Thanks
I got this same issue. Is there any way we can report this to mi? I don't mind if I lose my data rn, I just want this to start working normally again. someone please help if you know how to fix this
jyeros said:
Hello all,
I just got the V12.5.5.0 update on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I haven't tried the Wipe Data option because I want to back up my files first if possible.
Is there any way to back up my files or be able to fix it?
Please help.
Thanks in advance.
Click to expand...
Click to collapse
Same here, albeit I have Chinese version on Global ROM
wetito said:
the only solution is enter into fastboot mode and flash stock fastboot firmware via miflash or similar tool
Click to expand...
Click to collapse
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Use MTK Bypass for reparing https://megafon929.github.io/mtk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
i suppose try booting in safe mode dint work. the only solution is flashing full firmware, cause the ota packet is bugged.
try this tool
Home - Tool All In One
TOOL ALL IN ONE This tool support 67 different devices of some different OEMs. DOWNLOAD CHANGELOG XDA THREAD OTHERS PROJECTS
toolaio.tk
Timenator said:
Have you downgraded? Tried to, but accidentally locked bootloader. And it shows that version I have installed isn't compatible.
Click to expand...
Click to collapse
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
LucciM-Anon said:
i'm an absolute beginner at this stuff, so could you tell me how to downgrade it?
Click to expand...
Click to collapse
Rafaelmaga said:
I received the device yesterday, the update notification arrived and I installed it, I didn't imagine it could be a problem, I tried to reinstall the rom but the bootloader is also blocked, I don't know what else to do, I'm desperate.
Click to expand...
Click to collapse
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Timenator said:
Found a solution on web. If your phone is on Mediatek(I suppose all Note 10 5g are Mediatek? or no?) So, if it is, just look for an unlocker. You will also need MiFlash and I recommend to install Global MIUI 12.5.4. https://xiaomifirmwareupdater.com/miui/camellian/stable/V12.5.4.0.RKSMIXM/ - MIUI
Step by step guide:
How to Fix Your Hard Bricked Xiaomi Phone With Locked Bootloader
If you are familiar with custom ROM or flashing your phone, then there's a possibility that you have tried flashing your Xiaomi/Redmi/POCO Phone. Earlier
gadgetstouse.com
Click to expand...
Click to collapse
unfortunately this tutorial doesn't work here, I followed everything but it still didn't unlock the bootloader
Hi guys, I just woke up and my phone was in MIUI Recovery mode, just like yours.. Probably made the update automatically.
It seems this is a recent problem for many of us. I'm nowhere near an expect but I will continue looking for the solution (if possible, without whiping out the data or at least to be able to back-it up).
Will really appreciate if somebody posts if they find a solution.
Thanks!
The only solution is to wipe the phone. I got my lesson I will buy a samsung now
Hello all,
I got the V12.5.5.0 update to on my Redmi Note 10 5G (Global).
After I rebooted the system tapping the complete notification it is stuck on the MIUI Recovery 5.0 screen.
My device is not rooted. It just has received OTA updates.
I tried to reboot the system a few times, but it didn't work.
Also, I tried the safe mode, but it didn't work either.
After Reboot or safe mode, it returns to the MIUI Recovery screen.
I have tried the Wipe Data option and it worked and got me back to MIUI V12.5.4.0. But unfornnatly i lost all my files (about 90 Gb of data).
And this is the last i install any MIUI update until i see that a lot of user's have install it review it
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
guyz92 said:
My Poco M3 Pro 5G Global wasn't affected.
I manually download the OTA package and installed successfully.
This phone has a/b slot.
I'm wondering those facing this issue, have you tried switching from a to b slot or vice versa?
fastboot --set-active=a
fastboot --set-active=b
Click to expand...
Click to collapse
i think the ota released by xiaomi is bugged. you're operation is correct, but a correct ota might do this automatically. i have noticed that many users with unlocked bootloader, after the update have phone that dont boot. i think they cant enter on fastboot mode. the only solution is flash using mediatek SP FLASH TOOL. or MI FLASH PRO. or ALL IN ONE TOOL
Was someone able to access the "Connect with MIAssistant" part using pcsuite?
I couldn't, but I think it might be because the USB cable I'm using is not the original one from Xiaomi or one compatible.
work only if you have installed also pcsuite on your device. if u have a full stock loked device only solutions are Mediatek tool or miflash pro! or all in one tool. as i said a million time already
Hi everyone,
I bought a Xiaomi MI9 with 128GB of RAM supposedly brand new with an unlocked bootloader to replace my old Mi 9 with 64GB whose screen was broken after a fall. I flashed the latest version of the official EEA ROM and then, for security reasons, I made the mistake of unlocking the bootloader again with "fastboot oem lock" adb command. Since then, my phone start until the MUI logo is displayed then reboots. I have no access to anything. The only way out is to reflash a new rom in EDL mode but, to do this, I need the patched sdm855 ELF file for the mi9. I've tested the one for K20/Mi 9T which have the same name with no success. Can anyone provide me the holy grail ?
Thanks for your help.
David.
@Magellan13, Did you fix it? And how?
If it were a Samsung there would be a recovery key combo, a download mode key combo and if it were Qualcommm - EDL mode- where you would need the correct files to flash.
In recovery there would be a clear cache which can sometimes make it start.
Do u have access to fastboot by keys?, U may have to.unlock bootloader but to unlock u need have registered device on MIUI account.
I had soft bricked redmi 4 mobile with locked boot loader, I could go to mi recovery 3.0 and fastboot etc. I tried to flash santoni 10.3 rom via fastboot mode but couldn't flash it with "critical partition error" due to locked bootloader. Then I entered edl mode by shorting test points, then successfully flashed rom with clean all option via miflash tool 'santoni_10.3 global', mobile started well and i used it 2 days. It shows ota updates available of 11.0.2nammixm in setting's updater. I downloaded it and after rebooting it left me mi recovery 3.0 and then I choosen reboot to system and got suck on mi logo again. It means i softbricked device again with locked bootloader. This time i again tried edl mode with miflash tool but it gives error "object reference not set as an object ". Don't know hot fix it. I tried 2 different miflash tool versions, both the fastboot roms "santoni 10.3 global" and "santoni 11.0.2 global" to flash, but getting that error again and again.
Sorry for my bad english.
Please help me, I can go into fastboot mode and edl with port 'qhsusb 9008 com10'
Crying...
Problem resolved,
I got revived again my redmi 4 mobile.
Solution is to try any older rom and older version of mi flash tool.
Suggestions-
Use santoni_global_images_V8.2.12.0.MAMMIEA_20170629.0000.00_6.0_global_751410291c.tgz
And miflash-20220218 or miflash-20170425
Use Edl mode if you have locked bootloader,
Fastboot mode if having unlocked bootloader.
I will update my successes report if get managed to switch on miui 11 (currently having miui 8).