Related
Hi guys i flashed a rom of Mokee (For mb886 but date after 01/07), I ignore the status 7 error on recovery using notepad++ and modifying the script file (my whole fault). So i flashed the rom and doesn't work so i restore a nandroid backup and when i connect my phone to pc or CA it doesn't work, no charge, no storage mode, nothing. So, what can i do to fix this issue? hope can u help me guys, i'm afraid of this Sorry for my bad english.
Is the phone recognized in fastboot mode? If it is, you can try and flash a stock ATT, Bell, or Mex Retail ROM.
audit13 said:
Is the phone recognized in fastboot mode? If it is, you can try and flash a stock ATT, Bell, or Mex Retail ROM.
Click to expand...
Click to collapse
Hi, yes it is recognized, you mean with RSD Lite?
You can use Myth Tools or RSD lite.
audit13 said:
You can use Myth Tools or RSD lite.
Click to expand...
Click to collapse
Thanks man, I'll try
Any luck?
audit13 said:
Any luck?
Click to expand...
Click to collapse
I have not tried yet, but when I do, I tell you
audit13 said:
Any luck?
Click to expand...
Click to collapse
Tried with RSD but still doesn't work
ErickST18 said:
Tried with RSD but still doesn't work
Click to expand...
Click to collapse
You mean RSD Lite didn't install the ROM or you installed the ROM and USB port still doesn't work?
audit13 said:
You mean RSD Lite didn't install the ROM or you installed the ROM and USB port still doesn't work?
Click to expand...
Click to collapse
I installed the ROM with RSD Lite but usb port still doesn't work :S ... Would Myth tools make any difference?
ErickST18 said:
I installed the ROM with RSD Lite but usb port still doesn't work :S ... Would Myth tools make any difference?
Click to expand...
Click to collapse
No Myth shouldn't make any difference.
Which stock ROM did you install? If you installed the ATT, you could try the Mexico Retail or Bell too.
audit13 said:
No Myth shouldn't make any difference.
Which stock ROM did you install? If you installed the ATT, you could try the Mexico Retail or Bell too.
Click to expand...
Click to collapse
Only tried with ATT and Bell, no sucess
ErickST18 said:
Only tried with ATT and Bell, no sucess
Click to expand...
Click to collapse
The ROM boots? So you can charge it with a wall charger but not your computer, right?
It's strange because it works to transfer data.
audit13 said:
The ROM boots? So you can charge it with a wall charger but not your computer, right?
It's strange because it works to transfer data.
Click to expand...
Click to collapse
yep, the ROM boots, but no, neither wall charger works. No AC, no data transfer, no charge with pc. Nothing seems to work with it, i'm getting crazy. The only thing that works is run into fastboot and pc recognize it as fastboot mode.
ErickST18 said:
yep, the ROM boots, but no, neither wall charger works. No AC, no data transfer, no charge with pc. Nothing seems to work with it, i'm getting crazy. The only thing that works is run into fastboot and pc recognize it as fastboot mode.
Click to expand...
Click to collapse
After flashing a stock ROM, try flashing the latest version of CWM and see what happens.
I used RSD to flash back to stock Bell ROM and it would always hang at the Motorola logo. Once I flashed the latest CWM, the phone started to work. Maybe CWM will help in your situation too.
audit13 said:
After flashing a stock ROM, try flashing the latest version of CWM and see what happens.
I used RSD to flash back to stock Bell ROM and it would always hang at the Motorola logo. Once I flashed the latest CWM, the phone started to work. Maybe CWM will help in your situation too.
Click to expand...
Click to collapse
I will try, i hope so... Thanks for your time bro, i'll notice you once installed cwm.
q
ErickST18 said:
Hi guys i flashed a rom of Mokee (For mb886 but date after 01/07), I ignore the status 7 error on recovery using notepad++ and modifying the script file (my whole fault). So i flashed the rom and doesn't work so i restore a nandroid backup and when i connect my phone to pc or CA it doesn't work, no charge, no storage mode, nothing. So, what can i do to fix this issue? hope can u help me guys, i'm afraid of this Sorry for my bad english.
Click to expand...
Click to collapse
Your fault repaired yet，i have the same trouble.can you help me
acecombat3 said:
Your fault repaired yet，i have the same trouble.can you help me
Click to expand...
Click to collapse
yes, i've repaired this problem. I made a backup of all blocks partitions from another Atrix HD and restore this backup on my device and this solve the issue
ErickST18 said:
yes, i've repaired this problem. I made a backup of all blocks partitions from another Atrix HD and restore this backup on my device and this solve the issue
Click to expand...
Click to collapse
Do you used recovery restored? can you send the backup to me? thank you.
[email protected]
or upload skydivce and tell me the link
acecombat3 said:
Do you used recovery restored? can you send the backup to me? thank you.
[email protected]
or upload skydivce and tell me the link
Click to expand...
Click to collapse
Sure bro, as soon as i can i will upload it and tell you how to do it. I'm on work right now. Glad to help
Is it available? Or it is too early? thanks
I would really love it if we could get this.
The Nexus 6P already got it.
hopefully someone's working on one. If I knew how I would.
Android N Developer Preview OTA image - it is official flashable zip. So, we need someone who grub this OTA link.
droid-life.com/2014/06/05/download-nexus-ota-url-file/
Very surprised still we haven't got it.
manikandanguru said:
Very surprised still we haven't got it.
Click to expand...
Click to collapse
i used twrp to flash the N boot.img and system.img, since twrp flashes img files now. and i ended up dirty flashing it over pure nexus. took about 4 minutes.
simms22 said:
i used twrp to flash the N boot.img and system.img, since twrp flashes img files now. and i ended up dirty flashing it over pure nexus. took about 4 minutes.
Click to expand...
Click to collapse
If I want to flash it as my primary I would have done it when it was released.
I want to test it as a secondary rom using MultiROM.
It supports only flashable zip.
manikandanguru said:
If I want to flash it as my primary I would have done it when it was released.
I want to test it as a secondary rom using MultiROM.
It supports only flashable zip.
Click to expand...
Click to collapse
Tried that already, its not working with Multirom
I believe this is the link you're looking for
https://android.googleapis.com/pack...f7750fa94.signed-signed-shamu-ota-2659757.zip
I haven't done it but people are saying this works with multirom
danstah said:
I believe this is the link you're looking for
https://android.googleapis.com/pack...f7750fa94.signed-signed-shamu-ota-2659757.zip
I haven't done it but people are saying this works with multirom
Click to expand...
Click to collapse
Can this be flashable as secondary rom in MultiROM?
manikandanguru said:
Can this be flashable as secondary rom in MultiROM?
Click to expand...
Click to collapse
That was my understanding. I'm downloading right now to try it.
danstah said:
That was my understanding. I'm downloading right now to try it.
Click to expand...
Click to collapse
Downloading too.. Lets see
It's working with MultiRom for me.
danstah said:
I believe this is the link you're looking for
https://android.googleapis.com/pack...f7750fa94.signed-signed-shamu-ota-2659757.zip
I haven't done it but people are saying this works with multirom
Click to expand...
Click to collapse
Thanks man!
danstah said:
It's working with MultiRom for me.
Click to expand...
Click to collapse
This is the same file name and size as the link in the OTA thread to go to NPC56P from MMB29V. Not that I doubt you, but are you sure that this will install as is as secondary in MultiROM?
simms22 said:
i used twrp to flash the N boot.img and system.img, since twrp flashes img files now. and i ended up dirty flashing it over pure nexus. took about 4 minutes.
Click to expand...
Click to collapse
Can you link system and boot IMG plz
fubugang said:
Can you link system and boot IMG plz
Click to expand...
Click to collapse
i downloaded it then unzipped it.. then just pulled it out of N. i dont have anyplace to upload to at the moment, sorry.
fubugang said:
Can you link system and boot IMG plz
Click to expand...
Click to collapse
You can just pull them from Google's .tgz image file.
JimSmith94 said:
This is the same file name and size as the link in the OTA thread to go to NPC56P from MMB29V. Not that I doubt you, but are you sure that this will install as is as secondary in MultiROM?
Click to expand...
Click to collapse
Yup can confirm it works as a secondary ROM
fubugang said:
Can you link system and boot IMG plz
Click to expand...
Click to collapse
it'll be quicker downloading it then pulling it out. its only 842mb, the system.img unzipped is 1.2gb.
Since I updated my phone, I can't find the clock app anymore and settings app have a push notification but there is no update or anything. Also, I can't activate Bluetooth anymore. Any solve?
Akioru said:
Since I updated my phone, I can't find the clock app anymore and settings app have a push notification but there is no update or anything. Also, I can't activate Bluetooth anymore. Any solve?
Click to expand...
Click to collapse
you must be on beta version, b301 or b302
thelous said:
you must be on beta version, b301 or b302
Click to expand...
Click to collapse
And how can i do to recover Bluetooth and clock ?
Akioru said:
And how can i do to recover Bluetooth and clock ?
Click to expand...
Click to collapse
you dont.
thelous said:
you dont.
Click to expand...
Click to collapse
So i cant use blutoooth anymore and there's nothing else to do?
Akioru said:
So i cant use blutoooth anymore and there's nothing else to do?
Click to expand...
Click to collapse
no, unless you flash rull stock rom.
thelous said:
no, unless you flash rull stock rom.
Click to expand...
Click to collapse
So if I use e-recovery, all should go normal?
Akioru said:
So if I use e-recovery, all should go normal?
Click to expand...
Click to collapse
IF you can detect updates through erecovery then it is fine but if it doesnt show any file.
then you have to use 3 button update method to roll back to previous version rom.
Akioru said:
So if I use e-recovery, all should go normal?
Click to expand...
Click to collapse
Try to flash update.app through erecovery . Via 3 button trigger.
Actually u are in ndrm90-testkey
You can flash full stock ROM via dload
I downloaded and tried flashing this one but got an error at 5%.
LLD-AL00C00B172 (8.0.0.172),LLD-TL10C00B172 (8.0.0.172),LLD-AL10C00B172 (8.0.0.172)
Can someone tell me which version i correct for me?
Does it match your device model? Also what was the last firmware you had on the device?
Sent from my LLD-L31 using Tapatalk
I don't remember the last firmware but the device is LLD-AL10
I file I tried was the latest I could find on the website. I just tried another file, got the same error.
Your device might be a LLD-AL10 however the last 4 digits is important.
For example you have :-
LLD-AL10C00B172
LLD-AL10C01B171
The C bit is the important bit. Also make sure you download the FullOTA-MF file set.
hacktrix2006 said:
Your device might be a LLD-AL10 however the last 4 digits is important.
For example you have :-
LLD-AL10C00B172
LLD-AL10C01B171
The C bit is the important bit. Also make sure you download the FullOTA-MF file set.
Click to expand...
Click to collapse
Is there a way to check the C part from recovery or somewhere else?
I did download the Full OTA file btw.
Manish54 said:
Is there a way to check the C part from recovery or somewhere else?
I did download the Full OTA file btw.
Click to expand...
Click to collapse
Not sure as my phone hasn't been unlocked or twrp'd. However if its like the LLD-L31C432 then your best bet might be to try LLD-AL10C00B163 as on mine i can't install LLD-L31C432B132 however i was able to install LLD-L31C432B130 or LLD-L31C432B131.
Its worth a shot. Links in code area
Code:
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/update.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/LLD-AL10_all_cn/update_full_LLD-AL10_all_cn.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/public/update_data_full_public.zip[/url]
* I TAKE NO RESPONSIBILITY FOR BRICKED DEVICE
hacktrix2006 said:
Not sure as my phone hasn't been unlocked or twrp'd. However if its like the LLD-L31C432 then your best bet might be to try LLD-AL10C00B163 as on mine i can't install LLD-L31C432B132 however i was able to install LLD-L31C432B130 or LLD-L31C432B131.
Its worth a shot. Links in code area
Code:
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/update.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/LLD-AL10_all_cn/update_full_LLD-AL10_all_cn.zip[/url]
[url]http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2050/g1647/v126172/f1/full/public/update_data_full_public.zip[/url]
* I TAKE NO RESPONSIBILITY FOR BRICKED DEVICE
Click to expand...
Click to collapse
which method did you use to flash it?
Search the forum for this phone there be a guide to unblock phone.
Sent from my LLD-L31 using Tapatalk
@Manish54 How did it go, did them links help you resolve your issue?
hacktrix2006 said:
@Manish54 How did it go, did them links help you resolve your issue?
Click to expand...
Click to collapse
Holy ****! this worked with HuR tool. But the only problem is, its a chinese ROM, without play store. If you tell me what those 3 files were, i'll download the Indian version and flash it. Thanks a lot though
From what i understand its the following
1) Format an SDcard and Create a folder called dload in the sdcard.
2) Extract the contents of update.zip to the dload folder.
3) Place the SDCard in the phone.
4) Press and Hold VOL up VOL Down then the power button.
hacktrix2006 said:
From what i understand its the following
1) Format an SDcard and Create a folder called dload in the sdcard.
2) Extract the contents of update.zip to the dload folder.
3) Place the SDCard in the phone.
4) Press and Hold VOL up VOL Down then the power button.
Click to expand...
Click to collapse
This method didn't work. But HuR method worked. And I've flashed a custom rom now. Thanks a lot
Manish54 said:
This method didn't work. But HuR method worked. And I've flashed a custom rom now. Thanks a lot
Click to expand...
Click to collapse
IS Wifi working in this new ROM?
rsverma333 said:
IS Wifi working in this new ROM?
Click to expand...
Click to collapse
Yes flashing stock rom with HuR fixed everything.
Manish54 said:
Yes flashing stock rom with HuR fixed everything.
Click to expand...
Click to collapse
Wow, it worked for me too.
But, how can I install apps with no browser, file manager or play store?
Manish54 said:
This method didn't work. But HuR method worked. And I've flashed a custom rom now. Thanks a lot
Click to expand...
Click to collapse
which custom rom do u flashed & is volte on it ?
rsverma333 said:
Wow, it worked for me too.
But, how can I install apps with no browser, file manager or play store?
Click to expand...
Click to collapse
There is no play store on that Chinese rom, either flash a different stock rom or a custom rom.
VisHnu Raveendran said:
which custom rom do u flashed & is volte on it ?
Click to expand...
Click to collapse
Havoc. And no.
Manish54 said:
Havoc. And no.
Click to expand...
Click to collapse
I flashed that ROM too. But apart from Volte issue, I am not able to access google even after flashing OpenGAPPS. Currently, I am making it work with a VPN but is there a permanent solution?
rsverma333 said:
I flashed that ROM too. But apart from Volte issue, I am not able to access google even after flashing OpenGAPPS. Currently, I am making it work with a VPN but is there a permanent solution?
Click to expand...
Click to collapse
Did you follow the instructions property? Coz it's working for me.
How is Huawei handling root? Is it suspected to work or will this be a problem?
I guess the rooting process may be a bit similar to the Mate 20s. It took a while before root became available for Mate and the process relies on a somewhat compilicated procedure involving FunkeyHuawei and buying credits. If you really want to have root then probably better to wait or to buy a phone which is easier to root.
Hi,
Somewhat agree. Root might take time.
What I can confirm is that oem unlock is not greyed out.
P30 Pro dev options https://imgur.com/a/unJy0ZX
So do you think that someone will cook TWRP and magisk?
I already extracted the ram disk and tried patching it with Magisk.
It didn't boot.
Any other bright ideas?
JazonX said:
I already extracted the ram disk and tried patching it with Magisk.
It didn't boot.
Any other bright ideas?
Click to expand...
Click to collapse
Hope that someone will find a solution, maybe on chinese forums. I can't buy a non-rootable phone.
JazonX said:
I already extracted the ram disk and tried patching it with Magisk.
It didn't boot.
Any other bright ideas?
Click to expand...
Click to collapse
Is not ramdisk that you need to patch, try patch stock Recovery, at least works with EMUI 9.
kilroystyx said:
Is not ramdisk that you need to patch, try patch stock Recovery, at least works with EMUI 9.
Click to expand...
Click to collapse
Yeah, It was called Ramdisk_recovery
That's the one, isn't it?
JazonX said:
Yeah, It was called Ramdisk_recovery
That's the one, isn't it?
Click to expand...
Click to collapse
Is "RECOVERY_RAMDIS.img", in the tool is missing the "K". You can rename it to "RECOVERY_RAMDISK.img"
If you need to flash in the fastboot use this command:
fastboot flash recovery_ramdisk recovery_ramdisk.img
My p30 pro arrive today and i thought i can root it with this tutorial
https://myphoneupdate.com/root-huawei-p30-pro-unlock-bootloader-install-twrp-recovery/
And now i read here that its not possible? That is very Bad if this is so :/
Sorry for Bad English
Edit: oh... Yes now i See no Service sells this Codes at the Moment..
kilroystyx said:
Is "RECOVERY_RAMDIS.img", in the tool is missing the "K". You can rename it to "RECOVERY_RAMDISK.img"
If you need to flash in the fastboot use this command:
fastboot flash recovery_ramdisk recovery_ramdisk.img
Click to expand...
Click to collapse
Yeah, I figured it. Output was patched_boot img. It flashed without any issues. But couldn't reboot afterwards. Went into bootloop, and then back to eRecovery. Normal boot is fine. Patched boot didn't work.
JazonX said:
Yeah, I figured it. Output was patched_boot img. It flashed without any issues. But couldn't reboot afterwards. Went into bootloop, and then back to eRecovery. Normal boot is fine. Patched boot didn't work.
Click to expand...
Click to collapse
:crying::crying::crying:
JazonX said:
Yeah, I figured it. Output was patched_boot img. It flashed without any issues. But couldn't reboot afterwards. Went into bootloop, and then back to eRecovery. Normal boot is fine. Patched boot didn't work.
Click to expand...
Click to collapse
Unfortunately this means that Magisk is not ready to patch EMUI9.1
Has anyone tried the process ?
I might be doing it wrong, Please give it a try from your end as well!
JazonX said:
Has anyone tried the process ?
I might be doing it wrong, Please give it a try from your end as well!
Click to expand...
Click to collapse
Can you upload your stock img RECOVERY_RAMDISK?
I'll patch for you and then if the CRC/SHA is different you can try mine.
kilroystyx said:
Can you upload your stock img RECOVERY_RAMDISK?
I'll patch for you and then if the CRC/SHA is different you can try mine.
Click to expand...
Click to collapse
I have uploaded it here.
JazonX said:
I have uploaded it here.
Click to expand...
Click to collapse
Patched by me is different from yours.
Link:
https://mega.nz/#!ZZgHgapa!NO5_2VxavqN7v9RNwTlxjNTmKR40rOyWIW6k18LRJ-w
You can check the MD5, first is one that you patched and second is the one patched by me
Enclosed you can find the Magisk version used by my.
Check mine and let me know if it works.
kilroystyx said:
Patched by me is different from yours.
Link:
https://mega.nz/#!ZZgHgapa!NO5_2VxavqN7v9RNwTlxjNTmKR40rOyWIW6k18LRJ-w
You can check the MD5, first is one that you patched and second is the one patched by me
Enclosed you can find the Magisk version used by my.
Check mine and let me know if it works.
Click to expand...
Click to collapse
How to flash? Don't we need to unlock the bootloader first, if so I have to buy a unlock code right? I'm om 0.124
Puksom said:
How to flash? Don't we need to unlock the bootloader first, if so I have to buy a unlock code right? I'm om 0.124
Click to expand...
Click to collapse
Yes, to flash you need bootloader unlocked.
Don't waste your money yet, let's first JazonX test the recovery_ramdisk.img patched by me.
JazonX, have you tried? I hope it works