Hello, i do not know what happened but my phone doesn't want to show anything on the display. I was playing the new PES 2019 and first the display flashed 3 times while playing, then after maybe 10 minutes the phone stuck with image on it and the commentary sound. I thought that it might be usual and tried to hard reset it (volume UP + Power button). However the phone didn't show anything after that. Just the LED lights are working and when i try to hard reset again the screen flashes like 5-8 times and nothing appears.
Do you think that it might be a serious hardware problem or i should try to do something with the software?
Thanks in advance!
Anyone?
liverpoolchety__ said:
Anyone?
Click to expand...
Click to collapse
If you can get it to boot to fastboot mode then it can be maybe saved but if not it sound like something maybe died in the phone.
To boot to fastboot you have to have the phone powered off and then connect it to pc while holding - volume button if you get to show fastboot and rescue mode then you could try to get some thinks from internet unfortunatly to ublock bootloader you need to have a working system to get the code from because huawei does not give them out anymore so if you have still the warranty definitely use it.
Richard177 said:
If you can get it to boot to fastboot mode then it can be maybe saved but if not it sound like something maybe died in the phone.
To boot to fastboot you have to have the phone powered off and then connect it to pc while holding - volume button if you get to show fastboot and rescue mode then you could try to get some thinks from internet unfortunatly to ublock bootloader you need to have a working system to get the code from because huawei does not give them out anymore so if you have still the warranty definitely use it.
Click to expand...
Click to collapse
Thanks for your reply. Actually the phone is working. The thing is that when i turn it ON and after that when i lock it with the side BUTTON and after that when i try to unlock it with the same button the screen doesn't show anything but the phone is ringing, receiving emails and messages - it just works. If i want to use it again i have to restart it using volume down and power button. I have got the bootloader unlock code, but i can not find a proper topic to follow, as the phone is HUAWEI EVA-L09 and it was locked to Vodafone.
liverpoolchety__ said:
Thanks for your reply. Actually the phone is working. The thing is that when i turn it ON and after that when i lock it with the side BUTTON and after that when i try to unlock it with the same button the screen doesn't show anything but the phone is ringing, receiving emails and messages - it just works. If i want to use it again i have to restart it using volume down and power button. I have got the bootloader unlock code, but i can not find a proper topic to follow, as the phone is HUAWEI EVA-L09 and it was locked to Vodafone.
Click to expand...
Click to collapse
Wow I have similar problem but happens to me once in a month for me it is that the power button completly disconects and is unresponsive reset of the phone helps i have to restart it trough rooted app.
Richard177 said:
Wow I have similar problem but happens to me once in a month for me it is that the power button completly disconects and is unresponsive reset of the phone helps i have to restart it trough rooted app.
Click to expand...
Click to collapse
Ye, but the thing is that i have to restart it every time when i lock it, which is a bit annoying. I still thing that it is a software problem, however when i try to get in fastboot mode i here the sound on the computer, but nothing appears on the screen, that's why i can not operate with the phone in fastboot mode.
liverpoolchety__ said:
Ye, but the thing is that i have to restart it every time when i lock it, which is a bit annoying. I still thing that it is a software problem, however when i try to get in fastboot mode i here the sound on the computer, but nothing appears on the screen, that's why i can not operate with the phone in fastboot mode.
Click to expand...
Click to collapse
It is now almost surley software issue if you cant get into fastboot with proper screen you can be glad that the phone still works but maybe the fastboot works just without the screen showing in that case it is quite ok you should try to type in fasboot console "fastboot devices" and see if there is some device found
Richard177 said:
It is now almost surley software issue if you cant get into fastboot with proper screen you can be glad that the phone still works but maybe the fastboot works just without the screen showing in that case it is quite ok you should try to type in fasboot console "fastboot devices" and see if there is some device found
Click to expand...
Click to collapse
Would you please explain in depth how to do that?
P.S
I think i did it, what would you recommend after that?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
liverpoolchety__ said:
Would you please explain in depth how to do that?
P.S
I think i did it, what would you recommend after that?
Click to expand...
Click to collapse
After that since everything is working you shoud do downgrade and then upgrade that should clean every problem in huawei and hopefully the issue.
For the downgrade if you are on android 7 just sreach in google "downgrade huawei p9" there are videos and it is really not that hard (i think you dont need to unlock boot loader while doing the dload version)
And if you need you can unlock foloving this thread https://forum.xda-developers.com/p9/help/network-unlock-uk-vodafone-t3380287
just be careful everything will get deleted once you will want to unlock the bootloader i have never been unlocking phone with lock to vodafone or someone else so i cant really help you that much
and there is that think that you will have to pay like 4€(it is in the thread) to get the unlock of the network (but maybe you dont need it i really dont know i never had phone with network lock)
Related
Meow! Meow!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am CATGEEK, a typical 24-year-old techie-fashionista girl from the Philippines and was a P7 user till yesterday (sold it already). I have been busy lately job hunting why I wasn't able to make this post. I know this is a bit late but I am pretty sure this'll help a lot. How I was able to get a solution was because I too experienced this and I couldn't really trust the service center since I've read some posts somewhere that also had the same problem-- it couldn't be repaired. So my habit whenever I brick my phone is not sleep until I find a fix. I was in the brink of being hopeless and tried to lend money from friends to buy a new phone and just sell the P7 at a lower price since it's declared defective. But I've come to a thread here that I will be sharing with you (it is inside my zip file) and my software repair skills when it comes to android phones that will help you out with this quite complicated issue. It's actually easy but of course you need to go through the process first before concluding that I am right (still to some people, this'll really gonna take their brains out ha ha! like how I did before). So let's get started!
Pre-reqs:
1.Enable USB Debugging but how?
Go to Settings>About phone>Tap "Build number" 5 times then go back to Settings>Developer options>Enable USB Debugging
2.Booting to fastboot but how?
Hold volume down and power button simultaneously until you see a white screen with android logo and "Fastboot & Rescue Mode" here you will also see whether your phone's bootloader is locked or unlocked, so since your prob here is it is locked, we will unlock it, okay?
3.INTACT BRAINS, SO IT WON'T GET OUT WHEN YOU ARE HAVING A HARD TIME
4.BELIEVE IN YOURSELF, HAVE CONFIDENCE!
Note:
Everything is in my zip file. Just click this mediafire link, install necessary files, read manuals and start working on it!
Proper Credits to:
Wekii from XDA Forums
A simple thanks is highly appreciated
my huawei is G615-u10 how can i solve fastboot and rescue mode
Would this still require getting the unlock code through Huawei?
Sent from my Nexus 6 using Tapatalk
I cant get to the system, recovery, the force update method wont work and the bootloader is locked. What can I do? I sent a message to huawei asking for the code, but it takes probably weeks to get it(if I should get it). I cant get it on the offical page, I keep getting an error saying 'The Huawei ID used to apply for the unlock code has not been used on the device for more than 14 days.'. Please help!
I followed the steps to fastboot reboot. Now my phone is stuck at the HUAWEI boot logo? Any ideas? I used an official bootloader unlock code from HUAWEI. I know this is an older post, but I'm hoping someone will see this, and be able to help.
HELP!!
My Ascend P7 L07 is bricked! While trying to boot system and recovery i got 3 green leds and 2 red leds and "Boot error" screen appears and fastboot is unnable to flash stock recovery/system/boot img files (Error Command not Allowed), anyone can help me?
I am also having this same problem....I can't get to recovery and I am stuck at FASTBOOT AND RESCUE mode......and USB debugging was disabled ....I can't turn on USB debugging cause my phone can't boot up.......I got this problem while flashing a TWRP recovery ........I ALSO TRIED FORCE UPDATING ANDROID (by downloading stock ROM to SD card and then pressing : vol up+vol down+ power)
Guys......I found the solution..... All u have to do is to download stock ROM of ur huawei device and force update it.....
Step 1: download stock ROM for ur device
Step2: move the ROM to ur SD card in a folder....and rename the folder as " dload"
Step 3: remove battery and press vol up + vol down+ power ......and after 10 sec release the both vol buttons ( DON'T RELEASE POWER BUTTON) afters some time , ur phone should boot into force update
I can confirm that this method worked on my Huawei Y550-L01 that was stuck in Fastboot&Rescue mode.
Thank you!
Peter pan7034779691 said:
Guys......I found the solution..... All u have to do is to download stock ROM of ur huawei device and force update it.....
Step 1: download stock ROM for ur device
Step2: move the ROM to ur SD card in a folder....and rename the folder as " dload"
Step 3: remove battery and press vol up + vol down+ power ......and after 10 sec release the both vol buttons ( DON'T RELEASE POWER BUTTON) afters some time , ur phone should boot into force update
Click to expand...
Click to collapse
hello guys , i'm just a newbie and my english is worst , sorry for any mistake that i might make :crying: and thanks for reading my thread
thing is i tried to flash stock rom on my nokia 8 with online service tool (6.0.4) but in the middle of load , the software not responding and after 30 minutes and it said the process was failed
now my nokia 8 stuck at download mode and can't enter recovery mode or boot system ( my computer still be able to detect my phone but in fastboot mode ) , i tried to reflash with online service tool but with newer version (6.1.2) but when " rebooting bootloader " it restart my phone and it's still stuck at download mode and on computer it's said ht-tps://imgur.com/PDvUDfM now my phone look like this ht-tps://imgur.com/a/QFfZu ( sorry i'm new register , so i can't upload the picture =(( )
i tried QFIL but it cannot detect the port and said " no port" , installed driver but i still can't detec the port
thanks again for reading my post , and please help me =(( i contacted the nokia support and they told me to take the phone to repair center , and when i take to repair center , they said that i need to change my mainboard because it's dead or broken something like that , i just bought this phone a week .
Exactly the same occurred to my Nokia 6. Trying to hard-reset it I began playing with the vol and power keys, with and without the USB charger cable, and now it shows just a blue light or led at the upper left corner.
What ur model ? Only 1052 can use ost tool.
Are u see the tool flash partion system ?
Are u use edit firmware method ?
For easy guild... Use ntool with donate money.
Or.... Fasstbooot flash all file in firmware.
I had the similar boot problem. After my phone discharging i connect to charger and phone stuck on that message : Yourd device cant be checked for corruption. I have unlocked bootloader and installed android pie latest.
Is there any hope people or phone i dead?
I cant boot in download mode via fastboot cause i get message : no emulators found. How to solve that?
Is there any hope?
Anybody people?
How to turn off phone people?!! Its impossible it cant turf off!
Allek84 said:
How to turn off phone people?!! Its impossible it cant turf off!
Click to expand...
Click to collapse
Hold the volume keys and power key at the same time for as long as u can....maybe even a few minutes until it shuts down. If all else fails let it drain then boot to recovery and gfix whatever caused the boot hang
Its drained just before 30 minutes, and now the view is that
I cant boot to recovery neither to dowload
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nokia 7 plus using Tapatalk
MDV106 said:
Hold the volume keys and power key at the same time for as long as u can....maybe even a few minutes until it shuts down. If all else fails let it drain then boot to recovery and gfix whatever caused the boot hang
Click to expand...
Click to collapse
You are king thanks a lot i got it.
I must to press and hold every 3 keys(volume up,down and power) for few minutes and phone turn off. After that i could enter in recovery
Thanks again.
Sent from my Nokia 7 plus using Tapatalk
Allek84 said:
You are king thanks a lot i got it.
I must to press and hold every 3 keys(volume up,down and power) for few minutes and phone turn off. After that i could enter in recovery
Thanks again.
Click to expand...
Click to collapse
Glad I could help :good:
Hi everyone!
I've got similar problem to that. My device shows: "Your device can’t be checked for corruption. Please lock the bootloader”. I tried to fix that with OST, but no succes - critical unlock is neccesary. I've flashed with OST 6.04, 6.12, NOST 0.6, but nothing works. Also the ADB and QFIL can't see the device, so I can not critical unlock bootloader. In the device manager, phone is seen as ADB Interference -> fastboot Device, and after installing google driver as Android ADB Interference. Recovery and fastboot modes don't work, download mode works only after connecting with OST. I tried holding 3 keys, but phone turns off after about 20s and nothing happen - I can't enter recovery. I bought this device recently and some time later after turning on it showed that statement. The varranty has expired, so I can't send it to service.
I hope you can help me.
porsche96 said:
Hi everyone!
I've got similar problem to that. My device shows: "Your device can’t be checked for corruption. Please lock the bootloader”. I tried to fix that with OST, but no succes - critical unlock is neccesary. I've flashed with OST 6.04, 6.12, NOST 0.6, but nothing works. Also the ADB and QFIL can't see the device, so I can not critical unlock bootloader. In the device manager, phone is seen as ADB Interference -> fastboot Device, and after installing google driver as Android ADB Interference. Recovery and fastboot modes don't work, download mode works only after connecting with OST. I tried holding 3 keys, but phone turns off after about 20s and nothing happen - I can't enter recovery. I bought this device recently and some time later after turning on it showed that statement. The varranty has expired, so I can't send it to service.
I hope you can help me.
Click to expand...
Click to collapse
Try to unlock bootloader after connect to download mode with OST(if is somehow possible)unlock him then download Nougat or Oreo firmware only from here and try to flash with OST or NOST,butt preffered NOST.
https://tpedutw-my.sharepoint.com/p...CTID=0x0120007F0E21D15C09464184D190CC235B0516
While searching for a way to unlock the bootloader i found a way
Hello. Instructions for unlocking the bootloader.
-------------- Responsibility for your bricks I do not take over. Everyone does at their own peril and risk .--------------
Downloa ( Google)
1) Install the driver for the phone (in the header);
2) Install a special driver, find it in the Unlock_BootLoader \ Driver for Winwos \ DriverSetup.exe folder;
3) It is necessary to unwind the phone, remove the cover;
4) It is necessary to disconnect the battery;
5) It is necessary to close the contacts (Photo);
6) Connect the phone to the PC;
7) Open the program Unlock_BootLoader.exe, there is a menu at the top, the item: "Operations> Settings> You need to select the Unlock_BootLoader.xml file"
8) After selecting the Unlock_BootLoader.xml file, click "Operations" again and click Start. Or press the green play button.
9) Done. Now you have TWRP_Mod installed in the Recovery section.
Additionally
The method works both with a locked bootloader and an unlocked bootloader. The only difference is that how to use this program at the moment when the bootloader is unlocked, then you do not need to disassemble the phone and put it into TEST POINT mode.
If the bootloader loader, then the program flashes TWRP_Mod.img to the Recovery section. After flashing, the phone will automatically reboot and the bootloader will remain locked. But TWRP_Mod.img will work. If you need a full unlocking of the bootloader, then you need to prepare several other files. There was no time for that. I made the method only for flashing custom recovery.
In the video, my bootloader is unlocked. I had a chance to block the bootloader and delete all data, so I made a video with the unlocked bootloader.
With a locked bootloader, exactly the same thing, the only difference is that you will need to switch the phone to TEST POINT modeYoutube video
All thanks Goes for SergeySan27 for his work...
this made for 4pda and i am just sharing his work
This is 100% not working. Pls dont waste your effort
Wow
Specific what version of Pie do you have on Honor Play?
can u also tell if we have a method by which we can unlock our bootloader. If its possible using this technique then we can have development for our device. More people will be available to use the roms.
Excuse me, sir. Where is the TEST POINT?
Up for this...
Up for this...
Cor-L29 firmware 9.0.0.184 Not working....
PM me plz, need you to change my configue xml
Test Point or EDL Mode requires physically opening the phone
nuteyha said:
Up for this...
Click to expand...
Click to collapse
I know lot of people already know but for everyone else's clarification Test Point or EDL Mode requires physically opening the phone and shorting 2 electric points together something like the following video.
https://www.youtube.com/watch?v=W8salW6m-z8
I do not know exactly where those 2 point are on honor play.
But one good thing is opening honor play is comparatively easy as it does not require heating the screen with some heatgun. There are 2 special screws and then the screen is clasped.
Cor-L29 firmware 9.0.0.184 (SP53C636) Not working....
Tried on Huawei P20 EML-L29
Hello,
I have tried this method on my Huawei P20 EML-L29.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
the IDT started to flash the image and I got the successful PASS green message in the end.
The bootloader is temporary unlocked in testpoint mode
however, even if I have kept the VOL UP button pressed and removed the usb cable to reboot directly in the recovery mode (to prevent the overwrite with the default eRecovery) it still brings me to the default eRecovery menu.
I have even tried to flash TWRP manually in fastboot (using the tespoint mode to temporary unlock the bootloader) and I got the img file sent and written.
However, it still brings me to the default eRecovery.
Do I do something wrong or miss something? becase flashing of any image is successful but I can't get anything changed on the phone (just getting OKAY or success messages on the pc)
For everyone here trying by opening up the phone, make sure you DON'T touch any other 2 points or your motherboard will short-circuit and become unusable.
sorinbotirla said:
Hello,
I have tried this method on my Huawei P20 EML-L29.
the IDT started to flash the image and I got the successful PASS green message in the end.
The bootloader is temporary unlocked in testpoint mode
however, even if I have kept the VOL UP button pressed and removed the usb cable to reboot directly in the recovery mode (to prevent the overwrite with the default eRecovery) it still brings me to the default eRecovery menu.
I have even tried to flash TWRP manually in fastboot (using the tespoint mode to temporary unlock the bootloader) and I got the img file sent and written.
However, it still brings me to the default eRecovery.
Do I do something wrong or miss something? becase flashing of any image is successful but I can't get anything changed on the phone (just getting OKAY or success messages on the pc)
Click to expand...
Click to collapse
Did you try going to recovery through command line?
Code:
fastboot reboot recovery
(or reboot-recovery)
Sent from my COR-L29 using Tapatalk
Why would people have to take this tedious route to unlock their Huawei or Honor smartphones? Huawei as a company should listen and release bootloader to those who wish to unlock their system. They can put in place an agreement to be accepted by those who want to unlock their phones and expected no warranty after doing so. This is very simple to do.
Can someone confirm test point connectors on the play please?
Doesn't look too difficult imho.
https://4pda.ru/forum/index.php?showtopic=932709
Original thread ?
nuteyha said:
Cor-L29 firmware 9.0.0.184 (SP53C636) Not working....
Click to expand...
Click to collapse
Did you try this then and didn't work??
Does/can this work with Honor View 10?
I tried it with EML-L29C432, program showed me OK, but I still have stock recovery... Any idea?
Hey. I have a huawei p8 lite 2017 and whenever I turn on my phone, I get this:
ERROR FUNC NO 8 (hifi image)
ERROR FUNC NO 1 (security verify failed)
Is there something I can do? I can't even access fastboot. If you got any idea whatsoever, please, send a message. I don't want to buy another phone. Also, if you need more info about the phone, I'll try to give it to you.
Hey,
If fastboot doesn't work or bootloader mode is not accessible, I only see one option : use manufacturer rescue update mode. You may try this (you need an micro SD card with a least 4.5 GB free)
download this image : PRA_LX1_8.0.0.400(C432)
Extract it and put the dload folder into the root of our sdcard (as your phone doesn't boot you cannot copy directly : you need to remove your card from the phone then use a card reader in order to copy the dload content, then insert it back into the phone)
Turn off the phone
Press power and vol + & - buttons at the same time
Once you see the huawei logo stop pressing power but keep pressing on volume buttons
It should restore your phone with emergency update.
If it doesn't work there is a chance that internal emmc memory chip is dead.
Andrei1744 said:
Hey. I have a huawei p8 lite 2017 and whenever I turn on my phone, I get this:
ERROR FUNC NO 8 (hifi image)
ERROR FUNC NO 1 (security verify failed)
Is there something I can do? I can't even access fastboot. If you got any idea whatsoever, please, send a message. I don't want to buy another phone. Also, if you need more info about the phone, I'll try to give it to you.
Click to expand...
Click to collapse
Hi,
I forgot to use the reply button. I hope that my previous post will help.
damiendroid said:
Hi,
I forgot to use the reply button. I hope that my previous post will help.
Click to expand...
Click to collapse
My friend is having this same issue with her phone.
The button combo to reboot to recovery or bootloader or the download mode don't work at all. It just boots back to the same screen. For us tho the error message is error 10 instead of error 8.
pic related:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Helhound0 said:
My friend is having this same issue with her phone.
The button combo to reboot to recovery or bootloader or the download mode don't work at all. It just boots back to the same screen. For us tho the error message is error 10 instead of error 8.
pic related:View attachment 5710285
Click to expand...
Click to collapse
After some attempts trying to fix the issue my device definitively stopped powering up at all. It's probably a sign of dying infernal storage. I am sorry for your friend as there is probably no solution for his problem.
damiendroid said:
After some attempts trying to fix the issue my device definitively stopped powering up at all. It's probably a sign of dying infernal storage. I am sorry for your friend as there is probably no solution for his problem.
Click to expand...
Click to collapse
Thanks. I already told her now that she's been using it for so long it's probably dying. But she wanted to see if we could recover the data in it? I'm guessing that's not possible?
Helhound0 said:
Thanks. I already told her now that she's been using it for so long it's probably dying. But she wanted to see if we could recover the data in it? I'm guessing that's not possible?
Click to expand...
Click to collapse
Maybe it is possible to retrieve data using adb sideload as the device still powers on but I'm not skilled enough to help with this. My new device is not from Huawei so I cannot test what is possible, sorry. Maybe someone could help you if you open a new thread. Good luck though
damiendroid said:
Maybe it is possible to retrieve data using adb sideload as the device still powers on but I'm not skilled enough to help with this. My new device is not from Huawei so I cannot test what is possible, sorry. Maybe someone could help you if you open a new thread. Good luck though
Click to expand...
Click to collapse
I did open a new thread on this but there were no replies. I got her to get a new phone and give up on the old data. Thanks anyway.
I tried to root my redme note 9 using magdisc from pc. after completing all steps, I have given command to boot recovery through minimal adb, after that phone automatically moved from Fastboot mode and started blinking REDME on screen, a few moments later it goes black and again appear. it keeps continuing now. I tried long press on the power button for restart/switch off, but no use, it will vibrate and ON with redme logo, and will go black after few moments. i tried to enter into fast boot mode, but result is same, it will vibrate and go OFF, when I tried to connect pc, pc is not recogonizing this phone anymore. nothing is working, cant even switch off
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello, i have the same issue here, but just after trying to update pixelUI official.... infinite bootloop on miui logo, no fastboot, no recovery and not detected on the PC. Installed MTK drivers but nothing more... THX
Did you try to flash something?
Yep! upgrade from pixelUI official 3.7 to 3.8, had some intempestive reboot, so i swype and re-install and seen that, infinite boot loop, no recovery, no fastboot and phone isn't recognize by PC...
So i can't use SPflash tool to install stock rom...
Sometimes PC see the phone realy realy fast son i don't have time to verify in device manager..
Thanks for your fast response!
Install usb drivers and then force flashing using spflashtool.
thrasholiv said:
Hello, i have the same issue here, but just after trying to update pixelUI official.... infinite bootloop on miui logo, no fastboot, no recovery and not detected on the PC. Installed MTK drivers but nothing more... THX
Click to expand...
Click to collapse
i was trying to root my phone by magisk, but now the issue is solved, I tried SP flash tool
VD171 said:
Install usb drivers and then force flashing using spflashtool.
Click to expand...
Click to collapse
yes I tried this, now issue is solved
SP flash tool give me an error message "STATUS_BROM_CMD_FAIL", so i must use EDL but when i try "
[GUIDE] How to bypass authentication and flash in EDL with NO auth for FREE"Even after install and uninstall many version of python, when i try to execute "cdc-acm.inf" as administrator a prompt tell my python is not found...
THX for your answers!
guys i have the same issue. do anyone help me to recover. Please join with my on any screen sharing platforms so i can solve my issue. thanks
VD171 said:
Install usb drivers and then force flashing using spflashtool.
Click to expand...
Click to collapse
How can I do that, to force flashing using sp flash tool? something similar happens to me only that it does not turn on and when I connect it to the pc comes out the following error that I will attach an image and translate:
'usb device is not recognized
the last device you connected to this computer did not work and Windows does not recognize it.'
what can i do in that case?
afyjaslam said:
I tried to root my redme note 9 using magdisc from pc. after completing all steps, I have given command to boot recovery through minimal adb, after that phone automatically moved from Fastboot mode and started blinking REDME on screen, a few moments later it goes black and again appear. it keeps continuing now. I tried long press on the power button for restart/switch off, but no use, it will vibrate and ON with redme logo, and will go black after few moments. i tried to enter into fast boot mode, but result is same, it will vibrate and go OFF, when I tried to connect pc, pc is not recogonizing this phone anymore. nothing is working, cant even switch off
View attachment 5387173
Click to expand...
Click to collapse
hey man did you fixed it and how pls tell me thanku
ahmadLiaqat2839 said:
guys i have the same issue. do anyone help me to recover. Please join with my on any screen sharing platforms so i can solve my issue. thanks
Click to expand...
Click to collapse
hey did you fixed the problem bro and how
hey i have the same problem with my redmi note 9 pro please help
VD171 said:
Install usb drivers and then force flashing using spflashtool.
Click to expand...
Click to collapse
hello there, my redmi note 9 just got updated to miui 13 and for some time it sudenly freezes and not its in bootloop and i cant go to recovery mode nor fastboot, what do i need to do to fix this?
br
pembasherpa01 said:
hey did you fixed the problem bro and how
Click to expand...
Click to collapse
man did you get it fixed? please I would like to know
Any news on this?
I briked my phone.. cycling boot logo, cannot get to fastboot, cannot get to recovery, EDL does not work and the phone does not even show up in computer...