Related
Hi i just want to know can we flash the firmware zip on the motofirmware site using Nexus Toolkit?
if yes please help me with the guide.
if no how can i flash the firmware zip from the motofirmware site?
i know how to root , unlock the bootloader flash the stock using nexus toolkit. i know how to sideload the zip file using nexus toolkit. and i can flash the stock image by downloading manually from google developer site or automatically from nexus toolkit . but i want to know how to flash the zip file that we can download from the morofirmware site. i heard we have to use RSD Lite . but their is no step by step guide for nexus 6. so i want to try plase if anyone can help much appreciated. i downloaded the RSD Lite and the zip file i have install all the drivers as well but RSD lite is not showing my Device. i have tried unlocking the bootloader and rebooting to fastboot. please help? i have asked in motofiremware site as well no one is gibing me proper guide. thanks .
iRimas said:
Hi i just want to know can we flash the firmware zip on the motofirmware site using Nexus Toolkit?
if yes please help me with the guide.
if no how can i flash the firmware zip from the motofirmware site?
i know how to root , unlock the bootloader flash the stock using nexus toolkit. i know how to sideload the zip file using nexus toolkit. and i can flash the stock image by downloading manually from google developer site or automatically from nexus toolkit . but i want to know how to flash the zip file that we can download from the morofirmware site. i heard we have to use RSD Lite . but their is no step by step guide for nexus 6. so i want to try plase if anyone can help much appreciated. i downloaded the RSD Lite and the zip file i have install all the drivers as well but RSD lite is not showing my Device. i have tried unlocking the bootloader and rebooting to fastboot. please help? i have asked in motofiremware site as well no one is gibing me proper guide. thanks .
Click to expand...
Click to collapse
it wont run on a nexus 6 and you will probably end up bricking your device if it actually flashes.
It says its for nexus 6 ?
iRimas said:
It says its for nexus 6 ?
Click to expand...
Click to collapse
ahh, i thought you were talking about the moto x pro :angel:
No its the nexus firmware but I think that zip file we can't just flash normal like other zip file m that's y .I need help .
hello everyone so i messed up bad. need rsd lite firmware to flash if anyone can share. all i have now is the abiliy to get into bootloader mode. Any help would be appreciated.
mikelikesbikes said:
hello everyone so i messed up bad. need rsd lite firmware to flash if anyone can share. all i have now is the abiliy to get into bootloader mode. Any help would be appreciated.
Click to expand...
Click to collapse
All factory images can be found here: http://motofirmware.center/files/category/23-droid-turbo/
having trouble getting rsd to recognize my device in bootloader, anyone recommend some drivers i can try? windows 8.1
mikelikesbikes said:
having trouble getting rsd to recognize my device in bootloader, anyone recommend some drivers i can try? windows 8.1
Click to expand...
Click to collapse
Install Motorola Device Manager from Moto's website. That will give you the drivers you need.
My advice is don't use RSDlite. To get it to work, you have to edit the xml file in the firmware that you're trying to flash to remove all the other devices that it inexplicably also includes. All RSDlite does is automate the fastboot flashing process. A better way to do it, in my opinion, is to edit the .bat file that comes with the factory images and manually input the fastboot commands that you see there. If you want more detailed directions, see my post here: http://forum.xda-developers.com/droid-turbo/help/turbo-firmware-t3254185
tried your tutorial. now for some reason i cant get fastboot to recognize my device. device manager now says "fastboot quark S" with the little triangle beside it. fastboot devices isnt showing my device is connected,but it did before i tried manually flashing like in the post you linked me to. i dont get it
TheSt33v said:
Install Motorola Device Manager from Moto's website. That will give you the drivers you need.
My advice is don't use RSDlite. To get it to work, you have to edit the xml file in the firmware that you're trying to flash to remove all the other devices that it inexplicably also includes. All RSDlite does is automate the fastboot flashing process. A better way to do it, in my opinion, is to edit the .bat file that comes with the factory images and manually input the fastboot commands that you see there. If you want more detailed directions, see my post here: http://forum.xda-developers.com/droid-turbo/help/turbo-firmware-t3254185
Click to expand...
Click to collapse
what do you mean by editing the .bat file that comes with factory images?
mikelikesbikes said:
what do you mean by editing the .bat file that comes with factory images?
Click to expand...
Click to collapse
I mean right click on the .bat file that is included in the .zip file of the firmware that you're trying to flash and select "edit." This allows you to see the commands that the .bat file does when you double click on it.
But you don't have to worry about that, because I already outlined the necessary commands in the post that I gave you a link to.
TheSt33v said:
I mean right click on the .bat file that is included in the .zip file of the firmware that you're trying to flash and select "edit." This allows you to see the commands that the .bat file does when you double click on it.
But you don't have to worry about that, because I already outlined the necessary commands in the post that I gave you a link to.
Click to expand...
Click to collapse
any idea why fastboot doesnt see my device now? it did before, but I get the yellow triangle in device manager. I have installed every driver i can find... including motorola device manager and ran it several times. Was on mofo'd 4.4.4. and for some dumb reason thought i could flash the lollipop bootloader so now i am stuck with bootloader, recovery, but no os. any advice would be great.
OK, so i finally got fastboot to recognize my device again. Trying to download stock firmware from Rootjunky. Am i correct that I extract the zip into the fastboot folder then issue the commands? I am about to pull my hair out...
mikelikesbikes said:
any idea why fastboot doesnt see my device now? it did before, but I get the yellow triangle in device manager. I have installed every driver i can find... including motorola device manager and ran it several times. Was on mofo'd 4.4.4. and for some dumb reason thought i could flash the lollipop bootloader so now i am stuck with bootloader, recovery, but no os. any advice would be great.
OK, so i finally got fastboot to recognize my device again. Trying to download stock firmware from Rootjunky. Am i correct that I extract the zip into the fastboot folder then issue the commands? I am about to pull my hair out...
Click to expand...
Click to collapse
Yep. That should be all you have to do.
[solved read more below]
Guys can anyone please provide a step by step guide for installing nokia x2ds stock with nokia care suite
problem i faced:
-i downloaded nokia x2ds software from MrCrap
-i put the files at .../packages/RM-1013
-i start nokia care suite and chose product support tool
-i open RM-1013 product then chose recovery
[email protected]$$#@ BUT IT DOESNT DETECT THE DOWNLOADED SOFTWARE IDK WHY :crying:
i used the right product code 059V782
so please if anyone can help asap provide the guide :fingers-crossed:
[Edit]
=================================================================================
the directory should be C:\ProgramData\Nokia\Packages\Products\RM-1013
instead of C:\ProgramData\Nokia\Packages\RM-1013
=================================================================================
if anybody wants a detailed guide for how to reinstall latest nokia x2ds software via nokia care suite just let me know
You should download recovery through nokia care. I never tried but probably the tool don't detect third party downloaded recoveries.
Btw here is how I installed stock.
First downloaded and installed Nokia Software recovery tool. Connected my device. And downloaded the firmware through software recovery. It automatically detects everything. Then installed it, but after completion of process, software recovery told me that installation is not completed even though it was completed. So I unplugged and checked my device and all was done.
Also if u needed to do it again and software recovery says that ur previously downloaded firmware is corrupted or something like that, just switch software recovery to offline mode. It will not give any issue then.
Note : Btw there r handful of flashable stock rom zips available on xda
Devnikolus said:
Btw here is how I installed stock.
First downloaded and installed Nokia Software recovery tool. Connected my device. And downloaded the firmware through software recovery. It automatically detects everything. Then installed it, but after completion of process, software recovery told me that installation is not completed even though it was completed. So I unplugged and checked my device and all was done.
Also if u needed to do it again and software recovery says that ur previously downloaded firmware is corrupted or something like that, just switch software recovery to offline mode. It will not give any issue then.
Note : Btw there r handful of flashable stock rom zips available on xda
Click to expand...
Click to collapse
MrCrap provides the stock software for nokia x2 after microsoft has shutdown all nokia servers
and i have a full dead phone
i think my problem is which directory should i put the downloaded files in
-=sorry for bad English=-
That's not bad english dude. Anyway in my case directory is
ProgramData/Microsoft/Packages/Products/RM-1013/
In RM-1013 folder there is no zip all files r spread, so I think u can try extracting zip in it. Btw program data is a hidden folder.
And also I'm using Nokia software recovery tool 6.2.55
Any working download link of single file Firmware for RM-1013 Nokia X2 v2.1.0.13 (not 2.0.1.11) code 059V782 please?
Download Nokia X2DS Firmware RM-1013 059V782 v2.1.0.13 NDT MEA.
While Installing TWRP I formatted a Flash with Auto Flash Format option
and now device is not starting !
urvish015 said:
While Installing TWRP I formatted a Flash with Auto Flash Format option
and now device is not starting !
Click to expand...
Click to collapse
Now u have to Flash the stock rom again via sp flash tool
But how it can be possible ?( in bricked/totally dead phone )
User Sid said:
Now u have to Flash the stock rom again via sp flash tool
Click to expand...
Click to collapse
But how it can be possible ?( in bricked/totally dead phone )
urvish015 said:
But how it can be possible ?( in bricked/totally dead phone )
Click to expand...
Click to collapse
It is possible, If Ur phone goes dead or got soft bricked after flashing ROM/Recovery then u can able to Recover or fix it by using SP Flash tool
In hard bricked it is not possible......nd u mention that u r flashing TWRP then ur phone got dead it means it is a soft brick....
Method to Flash Stock Rom with SP Flash Tool...
1- Download Stock Rom==
Link== https://drive.google.com/file/d/0B5os0Tgr4idrN3pfRmgxNE9FWFE/view
2 Install Lenovo Drivers in ur pc and also keep in mind that u have VCOM Drivers installed on ur pc
Extract the zip file and flash the stock rom with sp flash tool
U can watch this video if u r not familiar with Sp Flash Tool...
https://www.youtube.com/watch?v=UxW17gEBY_M
If u feel any prblm jst ask...happy to help u
Scatter File is INVALID !
First of ALL
Thank U very much ! :laugh:
it is showing Scatter file is INVALID !
CHECK these screenshots !
Scatter File Error >> https: //ibb.co/ cj7JUQ (remove all spaces)
Scatter File Location >> https: //ibb.co/ eMq59Q (remove all spaces)
and .... phone getting loop of connected to pc and disconnected.( as i can hear sounds from PC)
urvish015 said:
First of ALL
Thank U very much ! :laugh:
it is showing Scatter file is INVALID !
CHECK these screenshots !
Scatter File Error >> https: //ibb.co/ cj7JUQ (remove all spaces)
Scatter File Location >> https: //ibb.co/ eMq59Q (remove all spaces)
and .... phone getting loop of connected to pc and disconnected.( as i can hear sounds from PC)
Click to expand...
Click to collapse
I think u r selecting Wrong Scatter File coz Yesterday my phone stuck in bootloop and i downloaded the same stock file which i have provided u.....and i successfully able to fix it..Here i m giving u the full details from where u select the scatter file
1- Download the stock rom ( I already provided the link above ) File size-1.3GB
2- Extract the file u got Stock file & Sp Flash Tool
3- Open SP flash Tool, It will ask u to find scatter file (Go to folder where u have extracted the folder> Find Target Bin Folder U will Find the Scatter file there)
4- If it also not detecting the download agent then u can find it in ( Extracted folder Aio upgrade > select Allinone
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note- If u don't have VCOM Drivers in ur pc, then ur pc can't able to detect ur phone and then u can't able to flash the stock rom so Install it
I recovered my phone ! but again ....
User Sid said:
I think u r selecting Wrong Scatter File coz Yesterday my phone stuck in bootloop and i downloaded the same stock file which i have provided u.....and i successfully able to fix it..Here i m giving u the full details from where u select the scatter file
1- Download the stock rom ( I already provided the link above ) File size-1.3GB
2- Extract the file u got Stock file & Sp Flash Tool
3- Open SP flash Tool, It will ask u to find scatter file (Go to folder where u have extracted the folder> Find Target Bin Folder U will Find the Scatter file there)
4- If it also not detecting the download agent then u can find it in ( Extracted folder Aio upgrade > select Allinone
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note- If u don't have VCOM Drivers in ur pc, then ur pc can't able to detect ur phone and then u can't able to flash the stock rom so Install it
Click to expand...
Click to collapse
I have recovered my phone via my friend. but he installed "Lolipop". so i wanted to update it to marshmallow.
for that ... i have downloaded your file (1.3GB) , put it in my sd card.
for installing it in recovery mode, i have also installed new recovery mode(TWRP), but after that, i can not start my device.
ONLY Recovery mode works. whenever i start my device, logo of lenovo comes, and than disappears. ( maybe phone get started after this,becauase when i connect phone to pc in that condition, my laptop detects the device and play that sound.)
urvish015 said:
I have recovered my phone via my friend. but he installed "Lolipop". so i wanted to update it to marshmallow.
for that ... i have downloaded your file (1.3GB) , put it in my sd card.
for installing it in recovery mode, i have also installed new recovery mode(TWRP), but after that, i can not start my device.
ONLY Recovery mode works. whenever i start my device, logo of lenovo comes, and than disappears. ( maybe phone get started after this,becauase when i connect phone to pc in that condition, my laptop detects the device and play that sound.)
Click to expand...
Click to collapse
Once u Flash TWRP u can't Update stock rom Now u again bricked ur phone.............
and also the Stock file i have provided is of 5.0 nt 6.0
Hi there,
I'm facing a huge problem and I can not find the solution Googling and reading in randon forums.
Basically after unlocking the bootloader I wanted to relocked it again to avoid fingerprints issues, so that's the problem. I did something wrong and everytime I press Power button it appears a message saying
"The current image(boot/recovery) have been destroyed and cannot boot..."
The thing is that I can not even access to fastboot pressing Power button + Vol-, just pressing Power button + Vol+ and it access to EDL, but my question is related to EDL thing.
I have downloaded the .ozip file which contains the ROM files, but I don't find the "rawprogram0.xml" or related files to flash the phone properly with Qualcomm Flashing tools.
I have also tried with "Msm download tool" but the program gives me and advert which says that the .ofp file is not correct blablabla.
Do you guys know where to get the proper ROM with rawprogram0.xml and patch files?
I would really appreciate your help because I'm getting crazy with this issue and I don't know how to fix it.
Thanks so much.
guide CN Version
How to Install Stock ROM on Realme X2 Pro (RMX1931)
Before doing anything, we need to have the ROM file for the designated device ie Realme X2 Pro. Here is the download link for the same.
Download Stock ROM File
RMX1931_11_0110: Download
Installation Guide
Before beginning with the installation remember a few pointers we have mentioned below.
Pre-Requisites
This ROM is exclusively for the Realme X2 Pro (RMX1931). Don’t use it on other devices.
Charge your phone completely before installing the ROM.
A Windows PC/Laptop
Download and install Realme USB drivers on your Windows PC.
Download QFil Tool or QPST Flash tool and install on your PC.
It is always recommended to take a backup of your Android Device.
Backup Android Phone Without Root on any device
If you have TWRP Recovery, Create and Restore Nandroid Backup using TWRP Recovery
GetDroidTips will not be responsible for any hardware or software issue happening to your phone upon installing this firmware or following this guide. Perform this installation at your own risk..!
Method 1: Instructions to Install via QFIL Tool:
Download Qualcomm Flash image loader tool and USB Drivers on your PC. Follow the below link to install the firmware using QFIL tool
Guide to Install Stock ROM using QFIL Tool
Method 2: Instructions to Install via MSM Download tool:
Download the MSM Download tool, firmware, and drivers on your PC.
Now install the USB drivers
Place the MSM download tool and firmware in the same folder
Open the MSM download tool and connect your device to PC/Laptop
Once you connect, it will automatically load the firmware, if not select it manually.
Click on start button and wait patiently to complete the installation process.
Once it is done! remove your device from PC. That’s it!
Method 3: Instructions to Install via QPST Tool:
Here are the instructions you need to follow in order to install Stock ROM on the Realme X2 Pro :
First of all, do all the PREREQUISITE STEPS and Now Open the Extracted QPST Folder
You will find two files with the name: Qualcomm_USB_Drivers_For_Windows.rar and QPST.WIN.2.7 Installer-00429.zip QPST folder
Open the QPST Win folder and Install the QPST.exe file on your PC/Laptop QPST install
After Installation, Go to the Installed Location in the C Drive
Open the QPST Configuration QPST Configuration exe open
Now in the QPST Configuration, Click on Add new port -> Select the com port of your device -> and close it QPST Configuration
Now Open the EMMC Software Downloader in the same folder located all the QPST Files EMMC Software download
In EMMC Software Downloader, Check program boot loaders -> Browse for the device com portEMMC Software download Browse
Now Click Load XML Def and browse for rawprogram0.xml in folder ROM in EMMC Software Downloader (If you didn’t extract please extract the ROM and then browse the file rawprogram0.xml)click and load xml
Now tap on Load Patch def and browse for patch0.xml in folder ROM load patch
Check the search path 2 and browse for the folder ROM search path QPST
Now click download, wait for the download to finish (it never finish but it also detects for a new driver, and that’s important) and it will search for the new hardware found, install the driver
That’s it! Once your installation is done! Reboot the phone! Congrats, you successfully installed Stock ROM on Realme X2 Pro.
So, that’s it, guys. Now you know how to install stock ROM on Realme X2 Pro (RMX1931). We hope this tutorial was helpful to you. In case you have any queries do let us know in the comments.
Check out this guide CN Version
Thanks for the reply, but it does not help. I have followed all the guides found in Google, but none has the correct ROM to get rawprogram0.xml and patch.xml files.
Btw, I have European Global ROM (RMX1931EX)
yj_206 said:
Thanks for the reply, but it does not help. I have followed all the guides found in Google, but none has the correct ROM to get rawprogram0.xml and patch.xml files.
Btw, I have European Global ROM (RMX1931EX)
Click to expand...
Click to collapse
did you try via fastboot to fix it ? it might work with the official global rom
natedogg20050 said:
did you try via fastboot to fix it ? it might work with the official global rom
Click to expand...
Click to collapse
any solition?, i have de same case
I think I almost have it, but I need the scatter file, any of you have it generated?
natedogg20050 said:
did you try via fastboot to fix it ? it might work with the official global rom
Click to expand...
Click to collapse
"The thing is that I can not even access to fastboot pressing Power button + Vol-, just pressing Power button + Vol+ and it access to EDL, but my question is related to EDL thing."
Isavar said:
any solition?, i have de same case
Click to expand...
Click to collapse
I sent it back to the shop and they gave me a new one. I said it was "updating issue"
There should be a fix hopefully soon, maybe check the thread how to lock the bootloader maybe it helps
What are people using to extract from ozip?
yj_206 said:
Hi there,
I'm facing a huge problem and I can not find the solution Googling and reading in randon forums.
Basically after unlocking the bootloader I wanted to relocked it again to avoid fingerprints issues, so that's the problem. I did something wrong and everytime I press Power button it appears a message saying
"The current image(boot/recovery) have been destroyed and cannot boot..."
The thing is that I can not even access to fastboot pressing Power button + Vol-, just pressing Power button + Vol+ and it access to EDL, but my question is related to EDL thing.
I have downloaded the .ozip file which contains the ROM files, but I don't find the "rawprogram0.xml" or related files to flash the phone properly with Qualcomm Flashing tools.
I have also tried with "Msm download tool" but the program gives me and advert which says that the .ofp file is not correct blablabla.
Do you guys know where to get the proper ROM with rawprogram0.xml and patch files?
I would really appreciate your help because I'm getting crazy with this issue and I don't know how to fix it.
Thanks so much.
Click to expand...
Click to collapse
Did you find a fix?
i have one now with "The current image(boot/recovery) have been destryed and can not boot"
any ideea? the client bring to me in that mode. I think i nned test point because the phone its in the bootloop, i cant make nothing with taste combination. I will open the phone first to remove battery... will see after... Thx in advance!
---------- Post added at 04:24 PM ---------- Previous post was at 04:12 PM ----------
good, the phone enter in HS mode without battery with vol+ and vol - pressed... will see next step. I'll try with QFil first...
xchris said:
i have one now with "The current image(boot/recovery) have been destryed and can not boot"
any ideea? the client bring to me in that mode. I think i nned test point because the phone its in the bootloop, i cant make nothing with taste combination. I will open the phone first to remove battery... will see after... Thx in advance!
---------- Post added at 04:24 PM ---------- Previous post was at 04:12 PM ----------
good, the phone enter in HS mode without battery with vol+ and vol - pressed... will see next step. I'll try with QFil first...
Click to expand...
Click to collapse
did you made to unbrick the device?
any update guys.....i have the same problem and i can't seem to find any solution
I have extracted the firmware and I got patch0.xml , rawprogram0.xml , prog_firehose_ddr.elf and bunch of other files .
I upload a picture of the files .
The firmware is RMX1931_11_A.11 .
I do not have this device yet and I am not 100% sure how to use it but as I understand there is an option to flash though QPST tool on EDL mode.
Update - I also extracted RMX1931EX_11_A.06 global firmware .
how did u extract the ozip file ??
---------- Post added at 05:40 PM ---------- Previous post was at 05:38 PM ----------
or965 said:
I have extracted the firmware and I got patch0.xml , rawprogram0.xml , prog_firehose_ddr.elf and bunch of other files .
I upload a picture of the files .
The firmware is RMX1931_11_A.11 .
I do not have this device yet and I am not 100% sure how to use it but as I understand there is an option to flash though QPST tool on EDL mode.
Update - I also extracted RMX1931EX_11_A.06 global firmware .
Click to expand...
Click to collapse
how did u extract the file ??
uv.007 said:
how did u extract the ozip file ??
---------- Post added at 05:40 PM ---------- Previous post was at 05:38 PM ----------
how did u extract the file ??
Click to expand...
Click to collapse
The OZIP file does not have any of the files that are needed to flash on QFIL tool. I extracted the ofp file .
I currently uploading the extracted files of the Global and CN versions and will post a partial guide of how to flash it through QFIL .I do not 100% sure that it will work as I have not tested it and the guide will be very dangerous and only recommended for people with hard bricked devices that have locked bootloader . I bought this device and waiting to receive it .I was planing to unlock the bootloader of the device and then I read that many people have hard bricked their device and decided to search a way to unbrick this phone in case that I will hard brick the phone in the future.
or965 said:
The OZIP file does not have any of the files that are needed to flash on QFIL tool. I extracted the ofp file .
I currently uploading the extracted files of the Global and CN versions and will post a partial guide of how to flash it through QFIL .I do not 100% sure that it will work as I have not tested it and the guide will be very dangerous and only recommended for people with hard bricked devices that have locked bootloader . I bought this device and waiting to receive it .I was planing to unlock the bootloader of the device and then I read that many people have hard bricked their device and decided to search a way to unbrick this phone in case that I will hard brick the phone in the future.
Click to expand...
Click to collapse
do u have any link for ofp file for realme X2 (RMX1992)
[/COLOR]
uv.007 said:
do u have any link for ofp file for realme X2 (RMX1992)
Click to expand...
Click to collapse
I just search on Google and found one, RMX1992EX_11_A.15_191029_ea418f8c.ofp - https://drive.google.com/file/d/1quux10IHGy6T_dbHljbdxaqWPY-ZBeg_/view
This is an ofp firmware, you can not extract it with winrar or 7 zip,you need special software . If you need I can upload an extracted version . The guide that i will post should be also good for the realme x2 as it has a snapdragon CPU .
or965 said:
[/COLOR]
I just search on Google and found one, RMX1992EX_11_A.15_191029_ea418f8c.ofp - https://drive.google.com/file/d/1quux10IHGy6T_dbHljbdxaqWPY-ZBeg_/view
This is an ofp firmware, you can not extract it with winrar or 7 zip,you need special software . If you need I can upload an extracted version . The guide that i will post should be also good for the realme x2 as it has a snapdragon CPU .
Click to expand...
Click to collapse
downloaded this zip and it's mirror too both are corrupted some crc issue