Related
Hi to all,
I hope people here can help me solve my gt problem connecting with my pc (win7), I already download this Samsung_P1000_USB_Drivers and install to my computer, still Kies cannot detect my tab.
Some say you don't need any driver if you're using Win7 but why I encounter this problem.
Some say you need to turn off the USB Debugging before you connect your tab from your pc but still I encounter this problem.
Some say install the driver from Kies built-in driver but still encountering this problem.
My GT O/S still stock, its still intact since I out my GT from the box.
Please share me your experience if you encounter this problem and how you solve it, I can't flash any rom because my pc can't detect my tab at all.
Thank You and Regards to all.
[email protected] said:
Hi to all,
I hope people here can help me solve my gt problem connecting with my pc (win7), I already download this Samsung_P1000_USB_Drivers and install to my computer, still Kies cannot detect my tab.
Some say you don't need any driver if you're using Win7 but why I encounter this problem.
Some say you need to turn off the USB Debugging before you connect your tab from your pc but still I encounter this problem.
Some say install the driver from Kies built-in driver but still encountering this problem.
My GT O/S still stock, its still intact since I out my GT from the box.
Please share me your experience if you encounter this problem and how you solve it, I can't flash any rom because my pc can't detect my tab at all.
Thank You and Regards to all.
Click to expand...
Click to collapse
Can odin detects your tab? Another note is, is kies with the latest version?
fastcx said:
Can odin detects your tab? Another note is, is kies with the latest version?
Click to expand...
Click to collapse
Hi fastcx,
ODIN can't detect my GT, and I think I have the latest Kies which is version 2.0.0.11014_49.
Purchase in Riyadh
Some info of my gtab
PDA: P1000JPJK2
PHONE: P1000JXJK2
CSC: P1000JPJK1
Personalization Status
--------------------------------
Network Lock: Off
Networj Subset Lock: Off
SP Lock: Off
CP Lock: Off
Guys need your help regarding my problem.
Try to uninstall the drivers. You can do that with many uninstaller programs or you can use system restore. Go to settings and set galaxy tab connectivity to samsing kies. Connect your galaxy tab (make sure to disable debugging mode). Windows will install drivers which might take a few minutes. As for odin try to go to downloas mode by holding volume down and power button. If you get a yellow shade with com#. Your tab is recognised and connected.
Hope it helps!
Same issue with Kies not detecting SGT
I'm new to the forum, and a new SGT owner, so my knowledge is limited. I have been researching these forums along with some help from the unlockr.com. Kies would not detect my tab. I downloaded the Samsung New PC Studio, and was able to have my drivers downloaded through this software. My tab is now rooted. I still don't know what else to do with the rooted tab at this point, but I'm still researching.
dxwilliams40 said:
I'm new to the forum, and a new SGT owner, so my knowledge is limited. I have been researching these forums along with some help from the unlockr.com. Kies would not detect my tab. I downloaded the Samsung New PC Studio, and was able to have my drivers downloaded through this software. My tab is now rooted. I still don't know what else to do with the rooted tab at this point, but I'm still researching.
Click to expand...
Click to collapse
Hi dxwilliams40,
What Samsung New PC Studio version you have?
Can you give me the url where you get this software?
Also, can you give me the procedure on how you get the driver using this Samsung New PC Studio?
TIA.
DarkPal said:
Try to uninstall the drivers. You can do that with many uninstaller programs or you can use system restore. Go to settings and set galaxy tab connectivity to samsing kies. Connect your galaxy tab (make sure to disable debugging mode). Windows will install drivers which might take a few minutes. As for odin try to go to downloas mode by holding volume down and power button. If you get a yellow shade with com#. Your tab is recognised and connected.
Hope it helps!
Click to expand...
Click to collapse
Hi DarkPal,
I uninstalled all samsung drivers and kies but still gt is not detected by win7.
I tried also download mode by holding both power and down volume button and odin 1.3 and odin 1.7 not detect my gt.
Any more idea?
TIA.
[email protected] said:
Hi DarkPal,
I uninstalled all samsung drivers and kies but still gt is not detected by win7.
I tried also download mode by holding both power and down volume button and odin 1.3 and odin 1.7 not detect my gt.
Any more idea?
TIA.
Click to expand...
Click to collapse
This sound worrying When you plugged in to your pc, did your tab's battery icon change?
fastcx said:
This sound worrying When you plugged in to your pc, did your tab's battery icon change?
Click to expand...
Click to collapse
Yes, it goes to recharge mode, this is the only thing I can only use between my gt and my computer is to recharge.
To all XDA member's who have this problem before and solve it, please share it to me, I can't move from here I have a good device but I can't maximize the use of it.
Regards to all,
Yes as a matter of fact i have more ideas. Press on menu button while on home screen, go to settings then wireless network and then choose usb settings. Choose ask on connection, if your tab is set on kies. If its set on mass storage set on kies, we all know windows installs no drivers for mass storage. Also try connecting tab on other computer and see if it connects preferrably with other OS. Sorry to disagree still doesnt seem worrying because i faced problem with a samsung mp3 player which used to give me hell with connecting using mtp (media transfer protocol). If it connects to other computers download mtp protocol from microsoft website manually. I will dig it up for you if you report that its working on other computers. Also will dig drivers from my own W7 machine 64 bit to see if it helps.
EDIT did a quick search online. Connect your galaxy tab in kies mode WHIlLE installing kies. Seemed to help many android galaxy S users.
W7 PORTING KIT DOWNLOAD: http://msdn.microsoft.com/en-us/windows/hardware/gg463543
DarkPal said:
Yes as a matter of fact i have more ideas. Press on menu button while on home screen, go to settings then wireless network and then choose usb settings. Choose ask on connection, if your tab is set on kies. If its set on mass storage set on kies, we all know windows installs no drivers for mass storage. Also try connecting tab on other computer and see if it connects preferrably with other OS. Sorry to disagree still doesnt seem worrying because i faced problem with a samsung mp3 player which used to give me hell with connecting using mtp (media transfer protocol). If it connects to other computers download mtp protocol from microsoft website manually. I will dig it up for you if you report that its working on other computers. Also will dig drivers from my own W7 machine 64 bit to see if it helps.
EDIT did a quick search online. Connect your galaxy tab in kies mode WHIlLE installing kies. Seemed to help many android galaxy S users.
W7 PORTING KIT DOWNLOAD: http://msdn.microsoft.com/en-us/windows/hardware/gg463543
Click to expand...
Click to collapse
Hi DarkPal,
I do 1 by 1 your advice but in the ended it's still the same, I installed MTP from your link but my PC can't detect my GT.
I attached my GT from our 2 laptops both Win7 but they can't detect also my GT.
Hope you have more plan
TIA
Still more plans. I have phd with samsung devices not connecting to many windows pcs (dunno if faulty drivers submitted to microsoft by samsung or issue in an end user enviroment. Anyway few question: is your galaxy in usb debugging mode? Tap menu then choose settings applications development. Make sure USB is not in debugging mode.
EDIT: is the usb charging fine? Is there any USB detections on tab screen. I read reports of faulty usb cables. If you have another SGT cable try it and see if it connects.
If uave the luxury connect other mtp devices like ipod or ipad or othe media players. This will sure exclude a pc or OS problem.
EDIT2 Here is a guide i followed back in mp3 days:
Go to samsung support site and download latest samsung kies (must be latest) and uninstaller package.
If u still have kies uninstall it with this package. If not run it anyway to remove any residual files. A cleaner program will clean as well.
Reboot your pc and your SGT.
Install samsung kies (make sure you run it as an administrator whether setup or program launch).
Now in your galaxy tab make sure usb settings is set to kies.
Fire up kies and connect your galaxy tab.
If there is no signs of connections. Access device manager and look for any imprperly connected device (would show as a yellow exclamation mark or saying unknown device). Reinstall kies USB driver. Disconnect tab and reconnect.
Few important notes:
Connect tab directly to the pc not via usb hub or similar apparatus (tab takes power from pc as well as data).
Update your windows media player to latest version (i know its bloated and hogs system resources but it has latest mtp repositories).
Always execute command as an adminstrator. Whether launching or installing.
I had the same problem long time ago. I solved changing the USB port. Befor I used the front case one...the I switch the port in one of the back case and it was working without any issue. Try this. I hope it help!
DarkPal said:
Still more plans. I have phd with samsung devices not connecting to many windows pcs (dunno if faulty drivers submitted to microsoft by samsung or issue in an end user enviroment. Anyway few question: is your galaxy in usb debugging mode? Tap menu then choose settings applications development. Make sure USB is not in debugging mode.
EDIT: is the usb charging fine? Is there any USB detections on tab screen. I read reports of faulty usb cables. If you have another SGT cable try it and see if it connects.
If u have the luxury connect other mtp devices like ipod or ipad or othe media players. This will sure exclude a pc or OS problem.
EDIT2 Here is a guide i followed back in mp3 days:
Go to samsung support site and download latest samsung kies (must be latest) and uninstaller package.
If u still have kies uninstall it with this package. If not run it anyway to remove any residual files. A cleaner program will clean as well.
Reboot your pc and your SGT.
Install samsung kies (make sure you run it as an administrator whether setup or program launch).
Now in your galaxy tab make sure usb settings is set to kies.
Fire up kies and connect your galaxy tab.
If there is no signs of connections. Access device manager and look for any imprperly connected device (would show as a yellow exclamation mark or saying unknown device).
Click to expand...
Click to collapse
Hi Again;
Debugging mode is off when I tested all your instruction on my sgt.
I uninstall Kies restart, download from samsung Kies 2.0.0.11014_49 and install it again, restart, test sgt fail again.
Win7 detect my sgt when you put on usb.
My sgt can recharge on my win7.
iPhone 3gs, iPhone 4, Blackberry 9780, iPad Wifi+3g all working with the same usb I use for sgt.
I hope you still have option that we can test
it look like you having problem with the data cable..... do you have another cable to try!
Well 2 options. A trick I never understood by Samsung support. Remove the Cable from PC while on keys wait 30 seconds and repeat procedure 3 times. Hopefully it will detect.
Also Cable could be the culprit as Ironically All SGT don't have exact same cables. You have to make sure you buy exact stock cable if you need a replacement. Ebay cables fail almost always even if it does the charge function.
you said w7 detects SGT when you put on USB. What type of detection Care to elaborate?
DarkPal said:
Well 2 options. A trick I never understood by Samsung support. Remove the Cable from PC while on keys wait 30 seconds and repeat procedure 3 times. Hopefully it will detect.
Also Cable could be the culprit as Ironically All SGT don't have exact same cables. You have to make sure you buy exact stock cable if you need a replacement. Ebay cables fail almost always even if it does the charge function.
you said w7 detects SGT when you put on USB. What type of detection Care to elaborate?
Click to expand...
Click to collapse
" USB Device Not Recognized " error occur when you put sgt on my computer.
And the removal of USB cable doesn't work also.
This is the original cable came from sgt box, it's new like 3 months only, anyway I will try to buy another cable and I hope this will work.
But anything you want me to try much appreciated, dunno where I can find original sgt cable, specially you mention buying online we don't know if genuine from samsung.
tnx man.
If device shows in device manager with yellow excalmation mark right click and uninstall unplug and try to plug the device again. And I Think i found a solution as odd as it seems first remove all usb devices connected to your pc ,flash drives, phones, pdas etc . You can even uninstall it by removing these devices from the device manager to uninstall these drives completely so they can be identified newly. Here is the weird part shutdown i mean pull the plug on computer wait 5 minutes to restart. A cold boot forces computer to reidentify usb ports. Reconnect and see if it works.
Also update your pc motherboard controllers from your pc driver site if w7 doesnt natively identify it.
EDIT follow this link instructions: www.ntcompatible.com/Desperately_need_help_---_USB_Devices_Not_Recognized_t32356.html. Seem to helped others.
DarkPal said:
If device shows in device manager with yellow excalmation mark right click and uninstall unplug and try to plug the device again. And I Think i found a solution as odd as it seems first remove all usb devices connected to your pc ,flash drives, phones, pdas etc . You can even uninstall it by removing these devices from the device manager to uninstall these drives completely so they can be identified newly. Here is the weird part shutdown i mean pull the plug on computer wait 5 minutes to restart. A cold boot forces computer to reidentify usb ports. Reconnect and see if it works.
Also update your pc motherboard controllers from your pc driver site if w7 doesnt natively identify it.
EDIT follow this link instructions: www.ntcompatible.com/Desperately_need_help_---_USB_Devices_Not_Recognized_t32356.html. Seem to helped others.
Click to expand...
Click to collapse
to make my life easier, now i use sony vaio i5 eseries with win7 64 bit.
so now the only device connected to my laptop is the sgt but still the device no recognized.
i go to device manager, i dont have the yellow exclamation instead i have the erroneous usb which i uninstall and restart try to connect again and still the same
maybe i need to find a new usb cable for sgt.
[email protected] said:
to make my life easier, now i use sony vaio i5 eseries with win7 64 bit.
so now the only device connected to my laptop is the sgt but still the device no recognized.
i go to device manager, i dont have the yellow exclamation instead i have the erroneous usb which i uninstall and restart try to connect again and still the same
maybe i need to find a new usb cable for sgt.
Click to expand...
Click to collapse
Still not giving up on you my friend. Try to put the tab in download mode (power and vol rocker down). Reboot computer and in device manager uninstall it. Disconnect the cable and reconnect it.
I have a final solution for you it involves installing heimdal usb drivers to your computer
Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it
Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Today I tried to connect via USB to transfer a new book I'd downloaded, and Windows didn't recognize the device. Has the error USB Device not recognized.
It shows on the device in the status area that MTP is installed, and it says on the device that USB is connected.
Tried everything. I have the latest version of Kies, uninstalled and re-installed. Deleted the device, let windows re-install it. The tablet charges fine via the same cable. I've tried different USB ports.
My Samsung Galaxy S2 Skyrocket connects on the same computer, seen by Kies, can transfer USB. Works on the same USB port!
And of course I have USB debugging turned on.
Any thoughts. I am certain it was due to the change of ROM.
Bump........
Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.
harry_fine said:
Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Click to expand...
Click to collapse
Are you sure you are in correct forum? I have never heard about UCLA modem or 2.3.6 ROM for GT8.9
Latest modem we have is KJ6 and Android version should be 3.2
Sorry, I was confusing this with my Galaxy S2 Skyrocket.
This is 2.6.36.3 kernel, Android 3.2, which I think is the latest official stock for the Tab. I think I used P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar.md5 for the upgrade.
Didn't work, same problem. Anyone else?
Tried a solution I found online, found some very long file extensions on the SDCARD, removed them, rebooted phone, and now no problem connected as a drive using MTP, and installing driver.
so what's the solution??
lastiko said:
so what's the solution??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=31929746&postcount=236
Simply install the drivers, reboot the PC, then connect the device.
subtil123 said:
Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.
Click to expand...
Click to collapse
it really works out.......thank you :good:
i have a galaxy note 10.1 and it didnt recognize not even the Adapter Cable.....
I have Samsung P7300
just want to root it, but my PC does not even recognize it. not even Kies..
done all the things searching on XDA and other sites, but still the same Problem,
I cant even find the MTP thing under USB Storage.
I can Connect my Samsung galaxy S Plus i9001 to it.
i have installed/uninstalled Drivers, and kies many times.
My problem is why there is NO MTP Option in this device, it is not even rooted.
.
So attempting to root I can not get my tmobile note 4 to be recognized by Odin when I enter downloading mode. I obviously tried installing samsung usb mobile driver, when I did a message window in Japanese with a red x appeared on my win 8.1 desktop. I tried different downloads of driver and even tried samsung site all give same error window. I then installed latest kies and it installed ok and recognized my note. I tried Odin and entered dl mode on note and still Odin doesn't recognize device. I uninstalled and reinstalled kies and driver but no luck. Is there a setting on my phone that's not allowing. I have usb Debug checked. When in dl mode it just says secure download enabled and then says entering udc. I am adb literate but new to odin. Any suggestions ...
Delete everything and start over. My laptop automatically downloads the drivers for me so not sure if your desktop will do the same.
If not, download drivers or just reinstall then and try it out and see if that works for you.
Well my fix was to go to a friend's house and use there pc. Tried everything and my win 8.1 did not like.
Removing or reinstalling Samsung drivers can be tricky. You did the right (easy) thing going to a different computer. Trying to use the same computer for an old and new Samsung device at the same time can easily cause your problem to happen. I found that you can't just switch between different versions of the drivers willy nilly. Perhaps the uninstaller routine doesn't work? Registry issue? Don't know.
If your win 8 pc can be rolled back to before you ever installed kies or a Samsung driver you might be able to get it to work using the correct (new) driver. That said, I'm still using the same driver I installed for my Note 2. Since it worked for the Note 4 and knowing what could happen, I left well enough alone!
Sent from my SM-N910T using XDA Free mobile app
I just got my Note 4 from Tmobile and trying to root it. However, Odin is not recognizing the phone when it is in download mode.
I have tried using different USB cables, one was the stock cable that the phone came with. Tired different ports on two different windows computers. Installed Kies and reloaded the USB drivers. Downloaded the drivers from multiple places. Tired removing the battery while the cable was plugged in. No luck with Odin recognizing the phone in download mode.
I do have developer mode turned on, and USB debugging. The phone is recognized when it's running like normal as a camera or mass storage device.
I'm at a loss of why it's not working. I have had no trouble with an S4, S5, and Note 3.
Does anyone have any idea or can link me to a solution?
Thank you.
dertanion said:
I just got my Note 4 from Tmobile and trying to root it. However, Odin is not recognizing the phone when it is in download mode.
I have tried using different USB cables, one was the stock cable that the phone came with. Tired different ports on two different windows computers. Installed Kies and reloaded the USB drivers. Downloaded the drivers from multiple places. Tired removing the battery while the cable was plugged in. No luck with Odin recognizing the phone in download mode.
I do have developer mode turned on, and USB debugging. The phone is recognized when it's running like normal as a camera or mass storage device.
I'm at a loss of why it's not working. I have had no trouble with an S4, S5, and Note 3.
Does anyone have any idea or can link me to a solution?
Thank you.
Click to expand...
Click to collapse
What method are you using to root? Tekhd has a nice one with all the downloads linked and try restarting PC.
BAD ASS NOTE 4 & GEAR S
I had some trouble with mine. I found that making sure the phone is NOT plugged in until it is already in DL mode is what worked. Gaining root was a first try operation. It took a dozen tries to install TWRP until I figured out what I was doing wrong. Now I can repeat it regularly.
Cliffs:
Put phone into download mode BEFORE plugging in the USB
I'd try a different version of Odin. I use 3.0.4 every day.
If that doesn't work then I'd try a friend's computer.
I'd try a different version of Odin.