Is there any way to use Xposed on EMUI 8.0? Latest version (v90-beta3, sdk 26, arm64) bootloops on my Huawei P10.
Try to VirtualXposed.
Wysłane z mojego Redmi 4X przy użyciu Tapatalka
xposed-v90-sdk26-arm64-beta4-test1.zip
pan.baidu.com/s/1M6nvyDbt5PCrCZELdTz35g
for emui 8.x
早就有了
strubelz said:
Is there any way to use Xposed on EMUI 8.0?.........
Click to expand...
Click to collapse
I don't have any Huawei devices myself nor have any using the arm64 Architecture but, you can always try the Virtual XPosed. I haven't used it yet and, eventually, plan to give it a try sometime.
Or you can see if the "xposed-v90-sdk26-arm64-beta4-test1" will work for you that's located on the following link.
https://www.androidfilehost.com/?w=files&flid=272642
I can't guarantee that either method will work for you but, those are probably the best options available (that I'm aware of).
Good Luck!
~~~~~~~~~~~~~~~
UNLESS asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Enigma Machine {aenigma = Latin for "Riddle"}.
Related
Hi.I recently installed xposed framework and tried to instal the Android N-Ify module but it doesn't change anything to the appearence,I have Android 6.0 with EMUi 4.0.
Can anyone help me,or is the EMUI the problem?
It won't work on EMUI.
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
AlinM. said:
Hi.I recently installed xposed framework and tried to instal the Android N-Ify module but it doesn't change anything to the appearence,I have Android 6.0 with EMUi 4.0.
Can anyone help me,or is the EMUI the problem?
Click to expand...
Click to collapse
Many X-posed modules are compatible with AOSP, or near AOSP. EMUI isn't close enough ....
OK,thanks.Is there any module that can give me a stock marshmallow or nougat notification center?
Unfortunately, no, there aren't such a modules.
Wysłane z mojego ALE-L21 przy użyciu Tapatalka
Hi,I am a ROM builder and since I have enough time to do this I would like to build whatever Android you want(excluding Oreo), so write down below what ROM would you like to see on this device(excluding Oreo as I said).
I will start with Dirty Unicorns Nougat.
Hi, redknight65, nice to meet you! I would like you to build MIUI for P8lite with kirin 620 processor. God bless your efforts.
ekobaltika said:
Hi, redknight65, nice to meet you! I would like you to build MIUI for P8lite with kirin 620 processor. God bless your efforts.
Click to expand...
Click to collapse
Yeah I wish that too but as I think you know this what @XTutorials is/was trying to do but it has some zygote conflicts so it's not booting but I'm not saying i'm not going to give it a try.
redknight65 said:
Yeah I wish that too but as I think you know this what @XTutorials is/was trying to do but it has some zygote conflicts so it's not booting but I'm not saying i'm not going to give it a try.
Click to expand...
Click to collapse
Zygote problem fixed, it's stuck on bootloop.
P.S. It would be a waste of time to try to build it yourself since I tried to use all Marshmallow ROM's as base and use many modes to build and none worked. All have different problems from one to another.
XTutorials said:
Zygote problem fixed, it's stuck on bootloop.
P.S. It would be a waste of time to try to build it yourself since I tried to use all Marshmallow ROM's as base and use many modes to build and none worked. All have different problems from one to another.
Click to expand...
Click to collapse
If you did fix the Zygote then what it's causing now the bootloop?
redknight65 said:
If you did fix the Zygote then what it's causing now the bootloop?
Click to expand...
Click to collapse
libandroid_runtime.so. Replaced and still nothing. I belive this is caused because the newer security patches. MIUI PatchROM requires a ROM with a security patch older than October 2016. None of our ROMs have that old of a security patch.
May be you can try ColorOS?
XTutorials said:
libandroid_runtime.so. Replaced and still nothing. I belive this is caused because the newer security patches. MIUI PatchROM requires a ROM with a security patch older than October 2016. None of our ROMs have that old of a security patch.
Click to expand...
Click to collapse
did you see this thread maybe it will help, it's talking about the same thing (security patches).
https://forum.xda-developers.com/pixel-xl/how-to/suhide-real-pixel-t3520001
""""With the November security patches, Google back-ported a security feature that allows only a certain whitelist of filesystem sockets to be used.""""
ekobaltika said:
May be you can try ColorOS?
Click to expand...
Click to collapse
But there is only jellybean source code for this ROM.
Maybe cyanogenmod 11?
Wysłane z mojego CHM-U01 przy użyciu Tapatalka
Mirdeusz said:
Maybe cyanogenmod 11?
Wysłane z mojego CHM-U01 przy użyciu Tapatalka
Click to expand...
Click to collapse
God. If this phone was released with 64-Bit version of Android 5 a older version is impossible to run on this device.
XTutorials said:
God. If this phone was released with 64-Bit version of Android 5 a older version is impossible to run on this device.
Click to expand...
Click to collapse
Actually if think it can be posible cause ARMv8-A was announced at October 2011, Cortex A53 at 30 Oct 2012 and Android KK at 31 October 2013 and as i think you know there is a model ALE-L04 what runs KitKat and it's a Cortex A53 64Bit so you can run KitKat on such processor but here comes the question "Why would you want CM 11(Android Kitkat)?"
redknight65 said:
Actually if think it can be posible cause ARMv8-A was announced at October 2011, Cortex A53 at 30 Oct 2012 and Android KK at 31 October 2013 and as i think you know there is a model ALE-L04 what runs KitKat and it's a Cortex A53 64Bit so you can run KitKat on such processor but here comes the question "Why would you want CM 11(Android Kitkat)?"
Click to expand...
Click to collapse
Yea. Fine. And where would you get the SOURCE code designed for android 4.4 if you only have android 5 64-Bit?
XTutorials said:
Yea. Fine. And where would you get the SOURCE code designed for android 4.4 if you only have android 5 64-Bit?
Click to expand...
Click to collapse
You don't need it designed when you can design it yourself but as i said i don't see the point of this.
XTutorials said:
Yea. Fine. And where would you get the SOURCE code designed for android 4.4 if you only have android 5 64-Bit?
Click to expand...
Click to collapse
Honor 4C had kitkat
---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------
XTutorials said:
Zygote problem fixed, it's stuck on bootloop.
P.S. It would be a waste of time to try to build it yourself since I tried to use all Marshmallow ROM's as base and use many modes to build and none worked. All have different problems from one to another.
Click to expand...
Click to collapse
I think that omni 6.0 has 2016 security patches
kosmitchak said:
Honor 4C had kitkat
---------- Post added at 04:39 PM ---------- Previous post was at 04:37 PM ----------
I think that omni 6.0 has 2016 security patches
Click to expand...
Click to collapse
Omni 6.0 indeed has 2016 security patches but it"s November we need it october or before
EDIT:
Here's the commit that change's that thing
https://android.googlesource.com/pl...8be33b0bedec211708c4525b9d3f3b4effb385c^!/#F0
redknight65 said:
You don't need it designed when you can design it yourself but as i said i don't see the point of this.
Click to expand...
Click to collapse
Im a fan of holo look That's all.
Wysłane z mojego CHM-U01 przy użyciu Tapatalka
Mirdeusz said:
Im a fan of holo look That's all.
Wysłane z mojego CHM-U01 przy użyciu Tapatalka
Click to expand...
Click to collapse
You can use a theme with holo look
who wants crDroid?
redknight65 said:
who wants crDroid?
Click to expand...
Click to collapse
Why not? Also very good! Come on! Build it! Good luck!:good:
What does this module do?
It makes Vol+/Play_pause/Vol- keys on Samsung headphones work on other android devices too.
The keylayout file I placed in this module was provided in this thread:
https://forum.xda-developers.com/general/general/fix-enable-3-button-headphone-t3733364
I Used Zackptg5's Unity Template to make a magisk module.
All the credit goes to:
topjohnwu
Zackptg5
__PG__
I just put a file in a folder
I only tried it on my Honor 5X phone with the new Samsung Headphone I just bought
It might work for you too.
for what version of Android? I have Oreo
Wysłane z mojego MI 6 przy użyciu Tapatalka
Adamk102 said:
for what version of Android? I have Oreo
Wysłane z mojego MI 6 przy użyciu Tapatalka
Click to expand...
Click to collapse
Sorry, I forgot to mention Its a general Android setting. will probably work on KK to P
MAGISK IS ROOT. But which one has more modules if I am using Resurrection Remix (Pie){Should I downgrade to use Xposed}.
Xposed is better for you.
Wysłane z mojego Redmi 4X przy użyciu Tapatalka
They serve different purposes.
Both have their own uses. Just install both and use whatever modules you need. They don't interfere with each other. There's a 9.0 Xposed that came out recently and a lot of cool modules can be used on it. Developers will most likely update their modules to add Pie support.
You can't compare a solution to make systemless things (magisk) to something that expand the framework of android.
magisk does not have xposed module ?
halotr said:
magisk does not have xposed module ?
Click to expand...
Click to collapse
There is a mod called taichi xposed
I tried it but you only can use xposed mods from within the special taichi app which are mainly written in Chinese so your mandarin knowledge has to be good to understand what you're doing.
Don't try if you can't read Chinese, you'll brick your device!
Hi,
I'm on version 9.4.26 and magisk 19.0-54d1207f (i believe it's the last beta), and still magisk hide is not working, apps still detect the rooting of the phone...
Anyone else with the same issue?
stokks said:
Hi,
I'm on version 9.4.26 and magisk 19.0-54d1207f (i believe it's the last beta), and still magisk hide is not working, apps still detect the rooting of the phone...
Anyone else with the same issue?
Click to expand...
Click to collapse
it's not a root issue, it's just an unlocked bootloader. Google Pay works only with locked devices.
Wysłane z mojego MI 9 przy użyciu Tapatalka
Topjohnwu statement
hi, had the same issue with some banking apps. go into settings from magisk manager and hit "Hide Magisk Manager". Hope this helps you
Edit: if edexposed is installed, disable the two modules in magisk manager
jerzyd said:
it's not a root issue, it's just an unlocked bootloader. Google Pay works only with locked devices.
Wysłane z mojego MI 9 przy użyciu Tapatalka
Click to expand...
Click to collapse
Mmmm in my previous mobile it was working perfectly and it was a mi 5s with unlocked bootloader so.. Don't think that's the problem.
I have a Mi Mix2s , stock rom, unlocked and rooted with Magisk.
GPay worked for month but since a week it doesnt.
I contacted Google and they told me, they discovered my unlocked BL and thats the reason why it doesnt work anymore