Related
Hey guys, I just recieved my Moto G 2014 and the first thing after my initial boot (to make sure everything was working) I did was unlock the bootloader, flash twrp, and root.
I just booted it up for the first time after doing all that and my wifi won't turn on. Toggling it on causes the switch to immediately go back off.
Is it a radio problem? I didn't touch any files other than logo.bin, recovery, or boot.img.
Can anyone help? Thanks.
Edit: It seems that whatever guide I followed had me flash a boot.img that probably messed my phone up. How can I get the original boot.img for my phone? This is the guide I used, which I got from the xda portal. It seems a few other people had problems with wifi in that thread, but a solution was never posted.
Edit2: I downloaded a stock based rom for the moto g 2014 and flashed the boot.img from it, but now I can't get root, even after flashing the supersu zip in recovery. Can anyone help?
Maybe you have to go through unlocking procedure once again? Not because the bootloader is relocked but there could be some kind of setting that has changed after flashing boot.img.
Just thinking.
Wolfcity said:
Maybe you have to go through unlocking procedure once again? Not because the bootloader is relocked but there could be some kind of setting that has changed after flashing boot.img.
Just thinking.
Click to expand...
Click to collapse
Eh, I don't think so. The root process, in all reality, should just be unlock bootloader, flash recovery, flash supersu if I'm not mistaken. I've done all that and i still can't get root. At least my wifi works again though.
Flash complete stock rom and try again.
I unlocked bootloader, rooted by booting (instead of flashing) into TWRP 2.8.5.0 and flashed SuperSU 2.46 without any problems. There must have been something wrong with the first boot.img.
Sent from my XT1068 using XDA Free mobile app
Ciao.
I have the same problem with my Moto G 2014 LTE XT1039. I installed the twrp 3. No network, no wifi signal.
Inform me if you find a solution.
Thanks a lot
Nicola
My solution
quanic said:
Ciao.
I have the same problem with my Moto G 2014 LTE XT1039. I installed the twrp 3. No network, no wifi signal.
Inform me if you find a solution.
Thanks a lot
Nicola
Click to expand...
Click to collapse
I had the same problem but could solve it as follows:
Download the file WCNSS_qcom_wlan_factory_nv.rar
Extract the file "WCNSS_qcom_wlan_factory_nv.bin" to folder "/persist" (root required)
Restart system
Information taken from the post http://forum.xda-developers.com/moto-g-2014/general/fix-wifi-missing-file-t3007540
Hi, I had the same problem . If WIFI DONT TURN ON .then u might have not used the command fastboot flashing unlock_critical . Try using this command will work for sure. If it didn't work flash using miflashtool but don't select clear all instead select 2nd option only storage
I was trying to sideload the new update and something wen wrong and it stopped updating. I tried to boot it up but now its just in a bootloop. I am completly stock and don't have TWRP. Is their a way to force unlock bootloader?
win465 said:
I was trying to sideload the new update and something wen wrong and it stopped updating. I tried to boot it up but now its just in a bootloop. I am completly stock and don't have TWRP. Is their a way to force unlock bootloader?
Click to expand...
Click to collapse
without enabling oem unlock in the developer options, nope. but you can use the stock recovery to check if a factory reset would help.
Factory reset doesn't help. When trying to sideload I keep getting error "system partition has unexpected contents" (Status 7).
win465 said:
Factory reset doesn't help. When trying to sideload I keep getting error "system partition has unexpected contents" (Status 7).
Click to expand...
Click to collapse
Had you unencrypted?
Yes, but i flashed backed to stock kernal.
win465 said:
Yes, but i flashed backed to stock kernal.
Click to expand...
Click to collapse
How?
Using the nexus tool kit. After that I locked the bootloader to sideload the update.
win465 said:
Using the nexus tool kit. After that I locked the bootloader to sideload the update.
Click to expand...
Click to collapse
Were you rooted before all of this too?
Nope
Evolution_Tech said:
Were you rooted before all of this too?
Click to expand...
Click to collapse
Nope
win465 said:
Nope
Click to expand...
Click to collapse
Then the toolkit most likely didn't replace the proper kernel, which is why the OTA failed. You'll have to RMA.
Evolution_Tech said:
Then the toolkit most likely didn't replace the proper kernel, which is why the OTA failed. You'll have to RMA.
Click to expand...
Click to collapse
Thank you for your help
Which toolkit did you use? Try to flash everything in BOOTLOADER with the newest 5.1.1 using ADB and Fastboot commands as opposed to the Toolkits. I'm hoping your successful in your endeavours, I'm working on mine too. Even if you are missing any part of your stock image or basic partitions, you should be able to flash it back to normal via your bootloader. I had a similar issue with my Nexus 5, last week, actually.
EDIT: So, when you sideload or fastboot the system partition, it's stopping you? I may have sleep induced stupidity here and not fully taking in the issue but, I was able to flash 5.1.0 on my Nexus 5 after re-locking it via fastboot commands.
RedHazy said:
Which toolkit did you use? Try to flash everything in BOOTLOADER with the newest 5.1.1 using ADB and Fastboot commands as opposed to the Toolkits. I'm hoping your successful in your endeavours, I'm working on mine too. Even if you are missing any part of your stock image or basic partitions, you should be able to flash it back to normal via your bootloader. I had a similar issue with my Nexus 5, last week, actually.
Click to expand...
Click to collapse
Not when his bootloader is locked. Unfortunately, the OP has locked his bootloader and can't boot to android to enable OEM unlock.
Possible idea
Evolution_Tech said:
Not when his bootloader is locked. Unfortunately, the OP has locked his bootloader and can't boot to android to enable OEM unlock.
Click to expand...
Click to collapse
There's some more concrete info in the first couple pages, especially regarding our N6's:
http://forum.xda-developers.com/nexus-9/help/to-toggle-allow-oem-unlock-via-fastboot-t3091119
Hope this helps.
I'll keep my eyes open for anything that seems pertinent.
Best of luck
RedHazy said:
Which toolkit did you use? Try to flash everything in BOOTLOADER with the newest 5.1.1 using ADB and Fastboot commands as opposed to the Toolkits. I'm hoping your successful in your endeavours, I'm working on mine too. Even if you are missing any part of your stock image or basic partitions, you should be able to flash it back to normal via your bootloader. I had a similar issue with my Nexus 5, last week, actually.
EDIT: So, when you sideload or fastboot the system partition, it's stopping you? I may have sleep induced stupidity here and not fully taking in the issue but, I was able to flash 5.1.0 on my Nexus 5 after re-locking it via fastboot commands.
Click to expand...
Click to collapse
I get this error message "system partition has unexpected contents" (Status 7).
win465 said:
I was trying to sideload the new update and something wen wrong and it stopped updating. I tried to boot it up but now its just in a bootloop. I am completly stock and don't have TWRP. Is their a way to force unlock bootloader?
Click to expand...
Click to collapse
Can you fastboot boot twrp recovery? And if that is possible, will twrp flash zips with a locked bootloader?
Edit: I'm almost certain fastboot boot recovery won't work with a locked bootloader. I almost thought I had a good idea.
I am in the same situation. Bootloader locked and no custom recovery nor adb enabled. surprisingly enough, yesterday my phone could boot up but it's stuck now in the configuration process. I cannot access to the settings so I can check usb debugging or oem unlock. I can only access the dialer. my question is: is there anyway to do that with just a dialer code?
Just to clarify: you never need to relock your bootloader! Unless you have some kind of security restrictions from the company you work with or something, just don't!
OTA can be installed even with the bootloader unlocked (normal or sideload). The only prerequisite is that the system is stock (not rooted, stock kernel, stock recovery, and so on).
Didgeridoohan said:
Just to clarify: you never need to relock your bootloader! Unless you have some kind of security restrictions from the company you work with or something, just don't!
OTA can be installed even with the bootloader unlocked (normal or sideload). The only prerequisite is that the system is stock (not rooted, stock kernel, stock recovery, and so on).
Click to expand...
Click to collapse
Sorry for the noob question but where can I find these OTAs and how to install one of them? Does it require usb debugging to be enabled?
Sorry if this seems like a dumb question - I'm a little green on the phone modding (last phone was a S3, rooted with oneclickroot I think) I have a bootloader unlockable XT1775 owens (bought from retail, no carrier lock) that I have been planning to bootloader unlock and root with TWRP & Magisk. I just got a notification that update "NPR26-58-45" is available. I downloaded it, but haven't installed yet - for fear that it might affect what I want to do for root.
What should I do? ie: - install it, and go forward with the root process? Root first, and then install?
jdsmn21 said:
Sorry if this seems like a dumb question - I'm a little green on the phone modding (last phone was a S3, rooted with oneclickroot I think) I have a bootloader unlockable XT1775 owens (bought from retail, no carrier lock) that I have been planning to bootloader unlock and root with TWRP & Magisk. I just got a notification that update "NPR26-58-45" is available. I downloaded it, but haven't installed yet - for fear that it might affect what I want to do for root.
What should I do? ie: - install it, and go forward with the root process? Root first, and then install?
Click to expand...
Click to collapse
Do NOT root first!
Edit: do me a favor and upload a system backup after you update, root and install twrp (if you do anyway), so I can make a twrp flashable ROM.
Edit-2: actually, if you could backup system before rooting or anything, that would be better.
You do not want to root first. Update then root as doing an ota while rooted may loose your root status or worse!
Goose03 said:
Do NOT root first!
Edit: do me a favor and upload a system backup after you update, root and install twrp (if you do anyway), so I can make a twrp flashable ROM.
Edit-2: actually, if you could backup system before rooting or anything, that would be better.
Click to expand...
Click to collapse
Thanks Goose. I will gladly upload that, but I will have to get back to you after the weekend - I apologize, heading out of town after work.
To clarify on the process, I would go through the step to unlock the bootloader (using the code I will get from Moto website and "fastboot oem unlock CODE"). After that is the TWRP step, right? If so, which command do I use: "fastboot boot recovery.img" or "fastboot flash recovery recovery.img" ??
jdsmn21 said:
Thanks Goose. I will gladly upload that, but I will have to get back to you after the weekend - I apologize, heading out of town after work.
To clarify on the process, I would go through the step to unlock the bootloader (using the code I will get from Moto website and "fastboot oem unlock CODE"). After that is the TWRP step, right? If so, which command do I use: "fastboot boot recovery.img" or "fastboot flash recovery recovery.img" ??
Click to expand...
Click to collapse
Np. Take your time. Thanks. Yes, that is what you do to unlock. Then for flashing twrp it's like you have but make sure to match the last part "recovery.img" to whatever the recovery is named. If your recovery is named twrp.img the command is:
fastboot flash recovery twrp.img
If it helps, I posted a step-by-step guide to unlocking, installing TWRP and rooting here: https://forum.xda-developers.com/moto-e4-plus/help/step-step-how-to-root-moto-e4-plus-t3752334
koop1955 said:
If it helps, I posted a step-by-step guide to unlocking, installing TWRP and rooting here: https://forum.xda-developers.com/moto-e4-plus/help/step-step-how-to-root-moto-e4-plus-t3752334
Click to expand...
Click to collapse
That's the one I had been following! I found that very helpful - that would make a good sticky post for guys like myself.
Since I have your attention too, I'd like to ask - is dmnoverity and phh's SU not needed at all? The only three files copied to the SD card (and then installed) are TWRP, Magisk zip, and Magiskmanager APK?
jdsmn21 said:
That's the one I had been following! I found that very helpful - that would make a good sticky post for guys like myself.
Since I have your attention too, I'd like to ask - is dmnoverity and phh's SU not needed at all? The only three files copied to the SD card (and then installed) are TWRP, Magisk zip, and Magiskmanager APK?
Click to expand...
Click to collapse
Phh SU is not needed since Magisk gives you all the necessary root and features. dmnoverity is not needed. I recommend you allow twrp system write access.
koop1955 said:
If it helps, I posted a step-by-step guide to unlocking, installing TWRP and rooting here: https://forum.xda-developers.com/moto-e4-plus/help/step-step-how-to-root-moto-e4-plus-t3752334
Click to expand...
Click to collapse
Well, I followed your instructions....with a minor tweak - and I'm having problems.
I unlocked the bootloader a couple days ago, but couldn't download the TWRP.bin file, so I used my phone through today. Formatted a 64gb card and loaded the magisk zip and apk on it. Flashed the TWRP on the phone, and used the wipe function to wipe data, cache, and dalvik, and then made a backup to my sd card. Flashed the magisk.zip, and then hit reboot "system". Now it just reboots to TWRP. I can reboot to bootloader, but hitting "start" goes to TWRP again.
What do I do? Where did I go wrong?
jdsmn21 said:
Well, I followed your instructions....with a minor tweak - and I'm having problems.
I unlocked the bootloader a couple days ago, but couldn't download the TWRP.bin file, so I used my phone through today. Formatted a 64gb card and loaded the magisk zip and apk on it. Flashed the TWRP on the phone, and used the wipe function to wipe data, cache, and dalvik, and then made a backup to my sd card. Flashed the magisk.zip, and then hit reboot "system". Now it just reboots to TWRP. I can reboot to bootloader, but hitting "start" goes to TWRP again.
What do I do? Where did I go wrong?
Click to expand...
Click to collapse
Try fastboot oem fb_mode_clear
Sent from my Moto E (4) Plus using XDA Labs
Goose03 said:
Try fastboot oem fb_mode_clear
Sent from my Moto E (4) Plus using XDA Labs
Click to expand...
Click to collapse
Thank you. I tried the command, and it said OK, but it still boots to TWRP; i then reboot to bootloader, and select Start and it goes into the normal system. Is that how it is supposed to work?
Last night I was stuck in a TWRP loop, but i got it to go with formatting data and factory reset wipe in TWRP. After finally getting the system to boot, I installed the Magisk Manager and then Adaway. Now today I was playing with the Chase Pay app, which won't let me sign in due to being rooted. I then reverted my hosts file and uninstalled Adaway, and played with all the hide options in Magisk., to no avail. Root Checker app says that Safetynet is tripped.
Does Magisk effectively work for apps that look at Safetynet on this phone - apps like Chase Pay?
jdsmn21 said:
Thank you. I tried the command, and it said OK, but it still boots to TWRP; i then reboot to bootloader, and select Start and it goes into the normal system. Is that how it is supposed to work?
Last night I was stuck in a TWRP loop, but i got it to go with formatting data and factory reset wipe in TWRP. After finally getting the system to boot, I installed the Magisk Manager and then Adaway. Now today I was playing with the Chase Pay app, which won't let me sign in due to being rooted. I then reverted my hosts file and uninstalled Adaway, and played with all the hide options in Magisk., to no avail. Root Checker app says that Safetynet is tripped.
Does Magisk effectively work for apps that look at Safetynet on this phone - apps like Chase Pay?
Click to expand...
Click to collapse
It is not normal to have it boot straight to twrp or the bootloader rather than the rom unless you do so manually.
Have you triedbplaying with the settings in Magisk Manager? There is an option to hide Magisk from your choice of apps. There is also a couple other options in the settings to hide things as much as possible. If you have Xposed installed it won't pass a safteynet check.
Sent from my Moto E (4) Plus using XDA Labs
XT1775 rom's is possible install on XT1776 ?
almao11 said:
XT1775 rom's is possible install on XT1776 ?
Click to expand...
Click to collapse
You could. I've flashed xt1775 firmware to my xt1776 to get a backup of the system to make a twrp flashable from. I don't recommend it, but if you only flash the system and not the modem and oem it should provision data services. Why do you ask exactly?
Sent from my Moto E (4) Plus using XDA Labs
I have successfully unlocked the bootloader using the requested unlock code.
Connected device to computer and sent commands using adb and Motorola drivers.
I would like to root the device (in order to obtain more control over install/uninstalling Apps)
I would like to continue with the STOCK ROM that I have.
I would like a system backup including the recovery. I want to install and use TRWP for that purpose before rooting the device using Magisk (as this modifies the recovery partition).The problem is first
1) confusion over my device on several posts. This is the UK version Pettyl XT1920-15 variant. (some posts are for the U.S. model, which has a fundamentally different system).
2)The tutorial says to install TWRP before Magisk, however to flash TRWP does it not require that the device be rooted?
I have attempted to follow the tutorial to install Magisk to root. I can not flash TWRP.
I have placed this file TWRP-3.2.3-TwrpBuilder-pettyl-2018-10-28_04-33.img in the adb folder from where I issue commands using PowerShell on windows.
3)I get the error: '(bootloader) uncertified or corrupt image)' straight away.
I now get an annoying message displayed in the top left when booting.
message: bad key
In addition to the tutorial(https://www.xda-developers.com/how-to-install-magisk/) I have carefully read this:
https://forum.xda-developers.com/moto-e5/help/moto-e5-xt1920-15-pettyl-unlock-t385958
and this one: https://forum.xda-developers.com/moto-e5/how-to/root-magisk-moto-e5-xt1944-2-norarow-t3824856
The bad key message persisted after I re-lock the bootloader.
Someone with this problem was advised to install stock ROM then re-lock the bootloader but I have not touched my ROM.
Any assistance would be appreciated.
You should be having a similar problem to what I had with my XT1924-4. You must remove the encryption from the device for the recovery work. By removing the encryption all your data will be lost so it's good to have a backup before:
https://forum.xda-developers.com/mo...very-twrp-3-2-3-x-moto-e5-plus-t3912189/page2
Can you give me a step-by-step procedure to follow remember that I am using windows not Linux to connect.
If I just wanted to get it back to as it was (without the bad key) can someone please assist a newbie.
Could you identify what these are and which ones are needed ?
Moto E5 Play pettyl 3.2.3
Moto_E5_XT1920-15-recovery.img
Moto_E5_XT1920-15-rooted_magisek_boot.img
platform-tools_r28.0.2-windows.zip
TWRP Backup Tool v1.1.zip
TWRP-3.2.3-TwrpBuilder-pettyl-2018-10-28_04-33.img
twrp-3.3.0-0-nora.img
XT1920-15 STOCK ROOTED FIXED.zip
XT1920-15_PETTYL_TESCOGB_8.1.0_OPGS28.54-53-2_cid50_subsidy-TESCOGB_regulatory-DEFAULT_CFC.xml.zip
I was wondering is there any RP2 ROMS like Lineage os or other ROMS? Or not yet or it's not possible to make for this kind of phone or maybe i didn't search more to know what's going on??
No specific ROM for RP2 but you can install GSI ROM after unlocking your bootloader.
Peace
chris5s said:
No specific ROM for RP2 but you can install GSI ROM after unlocking your bootloader.
Peace
Click to expand...
Click to collapse
Okay Thanks for the info, But i'm trying to root my phone on mr2 i can't find any thread that shows how to root mr2 with steps ??
I'm on MR 2 as well. Follow these steps :-
Unlock bootloader.
Flash Arter's kernel from bootloader mode. Then boot into TWRP recovery (comes with Arters kernel) and from there flash latest Magisk zip to get root.
Peace
chris5s said:
I'm on MR 2 as well. Follow these steps :-
Unlock bootloader.
Flash Arter's kernel from bootloader mode. Then boot into TWRP recovery (comes with Arters kernel) and from there flash latest Magisk zip to get root.
Peace
Click to expand...
Click to collapse
Doesn't work on MR2 December realeas i tried and it bricked my phone any other way?
AssyrianHero said:
Doesn't work on MR2 December realeas i tried and it bricked my phone any other way?
Click to expand...
Click to collapse
Yes it does you have to flash the global version NOT the AT&T version.
https://s3.amazonaws.com/cheryl-factory-images/aura-p-release-3123-user-full.zip
JDBarlow said:
Yes it does you have to flash the global version NOT the AT&T version.
https://s3.amazonaws.com/cheryl-factory-images/aura-p-release-3123-user-full.zip
Click to expand...
Click to collapse
Yes this is what i'm flashing "aura-p-release-3123-user-full" its global version and i think i'm doing something wrong can you explain step by step instructions? cause i'm new to RP2 and i'm used to old simple root method
Have you tried flashing Arter's kernel then reboot into system before trying to root?
If that works then maybe it's the rooting that's bricking the phone?
Which version of Magisk are you trying to flash?
chris5s said:
Have you tried flashing Arter's kernel then reboot into system before trying to root?
If that works then maybe it's the rooting that's bricking the phone?
Which version of Magisk are you trying to flash?
Click to expand...
Click to collapse
The problem there is no steps that shows what to do I'm just using my own steps, and I'm not using any Magisk I'm just trying to flash Arter's kernel.
Maybe explain what steps you are doing and what errors you are getting then?
Can you put the phone into bootloader mode? Is it unlocked? Do you have adb and do you know how to use it?
Peace.
AssyrianHero said:
Yes this is what i'm flashing "aura-p-release-3123-user-full" its global version and i think i'm doing something wrong can you explain step by step instructions? cause i'm new to RP2 and i'm used to old simple root method
Click to expand...
Click to collapse
Honestly it's easier to root phones today than it ever has especially the RP2.
If you are truly unlocked this should only take you minutes to do.
First things first. Open a terminal where you have ADB / FASTBOOT installed or if you setup the attributes properly just open a terminal.
Type adb devices and it should give you your serial number of your phone. If not adb isn't installed properly.
If so, type adb reboot bootloader and phone will boot to bootloader.
Type fastboot devices and again it should give you the phones ID. If not fastboot isn't installed properly.
If so, type fastboot flash boot and the name of your arter97 file.img this will also install TWRP.
After installation from bootloader menu scroll down to reboot recovery and it should boot to TWRP.
Click cancel then swipe to allow modifications. In TWRP menu select INSTALL then choose where you've saved the magisk 20.3 file on your SD or internal drive.
After installation reboot system then install magisk manager if not already installed. At this point you're rooted. Have a great weekend!!
Good luck! :good:
Make sure you have unlocked your phone, suggest following razer official instruction.(new xda user cant post outside link, search it)
1.Unlock the Bootloader 2.Unlock the Bootloader Critical Partitions 3.Flash official System Image
And please note unlock will erases all user data on the Phone!
After unlocked your phone you can flash arter97 kernel or f(x)THaxxorX TrinityKernel. Both of them contain TWRP, install Magisk Manager and flash Magisk in TWRP. Get rooted.
chris5s said:
Maybe explain what steps you are doing and what errors you are getting then?
Can you put the phone into bootloader mode? Is it unlocked? Do you have adb and do you know how to use it?
Peace.
Click to expand...
Click to collapse
The bootloader is unlocked i do have adb and i i know how to use it I've been rooting all my phones HTC M9 Samsung S7-8-9 and OnePlus 7 I've rooted too many phones but this one is little bit different than others i tried my own steps like i used to do:
I reboot my phone into bootloader and type fastboot devices and it gives me the Serial number and i then i type fastboot boot boot.img i don't know if this command works with this phone it actually worked with other phones this one not..
finixs said:
Make sure you have unlocked your phone, suggest following razer official instruction.(new xda user cant post outside link, search it)
1.Unlock the Bootloader 2.Unlock the Bootloader Critical Partitions 3.Flash official System Image
And please note unlock will erases all user data on the Phone!
After unlocked your phone you can flash arter97 kernel or f(x)THaxxorX TrinityKernel. Both of them contain TWRP, install Magisk Manager and flash Magisk in TWRP. Get rooted.
Click to expand...
Click to collapse
How to unlock the Bootloader Critical Partitions? I think i missed this step i have the bootloader unlocked..
Look on the Razer website for the specific instructions to unlock bootloader/critical.
The fastboot command to flash a boot img is
fastboot flash boot boot.img
Peace
AssyrianHero said:
How to unlock the Bootloader Critical Partitions? I think i missed this step i have the bootloader unlocked..
Click to expand...
Click to collapse
"fastboot flashing unlock" unlock bootloader
"fastboot flashing unlock_critical" unlock the bootloader critical partitions
Also, make sure you're using the Razer recommended USB cord and ADB/Fastboot.
https://developer.razer.com/razer-phone-dev-tools/factory-images/
Cables
When connecting your Razer Phone to a computer for any development, it is advised by Razer to not use the in-box USB Type-C to Type-C charging cable for flashing. The supplied cable is specifically engineered for fast power delivery, not for data transfer. Razer recommends you use a USB 3 Type-A to Type-C spec-compliant cable for any device flashing.
Click to expand...
Click to collapse
Upgrade your ADB/Fastboot here.