Related
Fellow androiders,
I believe I am in a really rare brick situation that no matter how I try, it still does not show any turn around.
[Introduction]
I bought a Korean version Milestone(Moto Qrty, as they put], and I took it to China. Because the original phone did not support sending Chinese text message, plus, too much telco provided apps are making the phone sluggish, I decided to follow my friend advice, to switch to widely available open-sourced Froyo (I wanted the CM).
[Problem]
I thought that the flashing process would not be too difficult and I could handle it by myself. But, it turns out that I have become a victim of an overly simplified version of flashing guide. I don't know what exactly have done wrong, after successfully rooted the phone, I vaguely remember that I have used CM ROM for Droid, instead of CM ROM for Milestone.
And that made my phone a brick. My phone will turn on, but will restart again and again after M logo(So-called M boot loop).
[Background information of the Phone and my PC environment]
Phone Model: A853
Original Bootloader version: A0.20
Original Android System: Froyo
RSD lite version: 5.3.1. (later switched to 4.6 due to the suspicion of RSD bug)
Operating System: Windows 7 64 bit, English
[What I have tried so far]
I have tried to follow many tips on the internet. Tips from Korean websites, from Chinese websites, and from English websites. Basically, these tips will let you flash back to the original ROM by using RSD lite.
But, no matter what I try, it will not fix the boot loop problem.
I've tried to
1) Bring the phone to the original status [did not work.]
- flash the bootloader into A0.20 (the original bootloader) with RSD lite;
(bl_a020_umts_sholesumts_skt_consumer_replacer.sbf)
- flash with original Froyo sbf (following the advice from Korean websites, flashed Clair first, and then flashed Froyo) with RSD lite.
(A853_2.1(Eclair).SBF / A853_2.2.1(Proyo).SBF)
* According to what Koreans say, it would make your phone into the original status, will even remove signs of root.
2) Used many combination of following bootloader and ROMs
- flash the bootloader into 90.78ch
(BL_9078_umts_sholes_GC_HS_Consumer_replacer.sbf)
- flash the bootloader into 90.78
(BL_9078_umts_sholes_HS_Consumer_replacer.sbf)
- GOT221 ROM
(GOT_RTEU_2_2_1FULL.sbf)
- And some other un-name-able ROMs
SGC_U2_03.04.0_USASHLSGCB1B2B5008.0R_PDS06A_HWp2a_1FF.sbf
3) Used many different OpenRecovery Variations
OpenRecovery v1.46
OpenRecovery 3.3
OpenRecovery GOT mod v2.1
4) Restore Nandroid backup which I made right before I made my phone brick.
5) Cleaned data/cache/dalvic as I do every flash, and tried boot without SIM card and SDCard.
[Some discoveries and successes]
- With 90.78ch + GOT2.2.1, it will show "Android" screen, but it will reboot as soon as the phone OS interface show up.
- According to my friend, when he flashed back to the original bootloader A0.20 + original froyo Rom, it showed TelCo Symbol "T" once (which is the booting screen right after M).
[Final Comment]
What I really want to know is that is it the time I give up on it? or is there any value of pursuing other knowledge on bring this phone back?
I really need this phone, and it will take some times to save money to buy another smartphone, I would really really appreciate if you can help me bring this phone back to normal.
Thank you.
some users reported problems with sdcard. try to boot without sdcard, and wipe everything after or before the flash process.
and i don think it's hard bricked...
Sir, I have tried so, somehow, I did not have lucks other had.
roofghost said:
Sir, I have tried so, somehow, I did not have lucks other had.
Click to expand...
Click to collapse
So you've tried flashing different bootloaders, with no success? I always thought flashing another bootloader version different from your own was risky.
If not, you can just try flashing the SBF from here: http://android.doshaska.net/rootable , then installing OpenRecovery, rooting the phone, flashing a custom ROM, etc.
..... my bad
I have the same issue,
in recovery there is message when wiping data/factory reset:
E:Error in CACHE:fota/log
(no space left on device)
I am wondering, if I move CACHE to SD would it help??
Yesterday I have installed original Rom (shols~) and phone booted once to android and when I have rebooted it, there is M bootloop again.
Please help me
skadude66 said:
So you've tried flashing different bootloaders, with no success? I always thought flashing another bootloader version different from your own was risky.
If not, you can just try flashing the SBF from here: android.doshaska.net/rootable , then installing OpenRecovery, rooting the phone, flashing a custom ROM, etc.
Click to expand...
Click to collapse
Thanks, did not work.
I have a feeling that the "doshaska" will know how to solve this. Anyone know how to contact or PM him?
Thanks.
By the way,
in this case, is there anyway can fix the brick via "console" in the OpenRecovery?
Thanks.
So... you have open recovery and can get to the console...
What happens if you copy CM to the updates folder and flash CM?
zeppelinrox said:
So... you have open recovery and can get to the console...
What happens if you copy CM to the updates folder and flash CM?
Click to expand...
Click to collapse
Yes, I can enter OpenRecovery and can get to the console.
And,
sorry about the CM, I think I will have to try that again and let you know then.
Is there any CM ROM you want me to try? (Hopefully with a reliable instruction. If you are busy, you can just leave this part, I will look for myself about the instruction.)
Truly thank you and glad to see new reply under this topic.
Well, use OR's mount as usb function and plug into your computer.
Copy the latest CM7 (I think that's what you want - or any ROM really) to the updates folder.
Wipe all caches
Then apply the update
It should "just work"
I mean, the hardest part is getting into OR lol
I'm surprised that your battery hasn't died yet
zeppelinrox said:
Well, use OR's mount as usb function and plug into your computer.
Copy the latest CM7 (I think that's what you want - or any ROM really) to the updates folder.
Wipe all caches
Then apply the update
It should "just work"
I mean, the hardest part is getting into OR lol
I'm surprised that your battery hasn't died yet
Click to expand...
Click to collapse
Can I install CM7 on Froyo? I thought that was for the Android 2.3.
I have just flashed back to the original bootloader of A0.20 (it was 90.78 as I play around with it.), and flashed the original korean .sbf froyo. Just to follow your suggestion.
I will try to install vulnerable recovery. I think in this way, I can use OpenRecovery again.
About my batter, I purchased a separate battery charger.
I will keep my status updated as soon as I try this out.
Thanks.
same problem and flash so many rom My milestone can't acess sdcard on recovery mode and android os.
Sent from my Milestone using XDA App
guys same problem here, help us
Hi guys.
I want to get into rom flashing, but to be honest I find it rather confusing to say the least.
It would appear that ROM manager seems to be the easiest way to flash my phone correct?
Am I right in saying that all I need to do is download whichever rom I wish to install, rename it to "install .zip", put this file on the internal SD (not quite sure where exactly), then use ROM manager to flash, then it's done?
Is this the safest way of doing a flash?
Sorry for the noob questions.
You shud read your previous post dude
Sent from my GT-I9000 using XDA
Omarjivraj said:
You shud read your previous post dude
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
Thanks mate. I did, but I'm interested in trying other roms other than 2.3.6.
Darren K said:
Hi guys.
I want to get into rom flashing, but to be honest I find it rather confusing to say the least.
It would appear that ROM manager seems to be the easiest way to flash my phone correct?
Am I right in saying that all I need to do is download whichever rom I wish to install, rename it to "install .zip", put this file on the internal SD (not quite sure where exactly), then use ROM manager to flash, then it's done?
Is this the safest way of doing a flash?
Sorry for the noob questions.
Click to expand...
Click to collapse
I thought ROM manager took all that out of it. All you need to do is make sure your on latest CWM (which is does for you before you can download, i believe) and then you pick your download. Once it finishes it asks you whether you want to install and it does it all for you...
There is no "safe" way to flash. Something can always go wrong. I advise you follow the directions on the threads of your chosen rom. That way you can learn of the current bugs, the best way to flash based on your current situation (GB, Stock, another ICS etc) and what you may need to do before hand e.g. wipe/factory reset
If you have any questions on a particular installation method search the forum and the thread. If you cant find it then ask within the thread of your chosen rom.
Usually if its another rom i believe the best thing to do is wipe/factory reset from recovery menu and then choose zip from sd card. (But you still shoud read the first 2 pages and last 3 pages of the thread)
Talon26 said:
I thought ROM manager took all that out of it. All you need to do is make sure your on latest CWM (which is does for you before you can download, i believe) and then you pick your download. Once it finishes it asks you whether you want to install and it does it all for you...
There is no "safe" way to flash. Something can always go wrong. I advise you follow the directions on the threads of your chosen rom. That way you can learn of the current bugs, the best way to flash based on your current situation (GB, Stock, another ICS etc) and what you may need to do before hand e.g. wipe/factory reset
If you have any questions on a particular installation method search the forum and the thread. If you cant find it then ask within the thread of your chosen rom.
Usually if its another rom i believe the best thing to do is wipe/factory reset from recovery menu and then choose zip from sd card. (But you still shoud read the first 2 pages and last 3 pages of the thread)
Click to expand...
Click to collapse
What is the CWM, and why do I need that?
CWM = colockworkmod. Its basically the a new recovery menu that gives you more freedom to what you can do whilst in the menu. You have it on non-rooted devices (stock firmware/samsung firmware) but as i said it provides more freedom. I believe almost every rom uses a version of it, either adapted or not.
Im not sure you will be able to use ROM manager on a device that is not yet rooted (rooted means you have administrative privileges like in windows). You will need root access as you will be changing the system files which if done incorrectly will cause something to go wrong. Which is why you wish to use ROM manager. TBH is very hard to do something wrong with the SGS and not be able to come back from it to have a fully capable phone again.
Don't rush into anything though. Don't root or flash anything without knowing the risks and what could happen, and in-turn what needs to be done to correct it. If you know this then usually you will understand what went wrong and how to fix it.
Sorry for leaving all these long messages, just trying to be clear
Hello everybody,
First of all: I have rooted some devices before, often in very bad conditions (Softbricked ones, simlocked and branded ones et cetera). However, all of them were not mine.
My smartphone is the Samsung Galaxy Note w/o branding or simlock but with the original Samsung software.
There wasn't really a reason to root my phone up to the point when it broke down (ergo: Shut itself down, reinstalled everything) on one day a few months ago, since that day, my phone has got a really, really bad battery life, apps are destroyed and it is pretty slow. Built-in obsolescence, as I won that phone when it was released, so I got the earliest version.
Because of this, I want to root dat phone and install dat cyanogen-shizzle.
All the phones I rooted before were rooted with my untested and never-recommended method of rooting it with a exploit on the phone, putting up clockworkmod via rom manager and then flashing cyanogen. Sometimes the phone was going crazy, but it always worked, every phone is working way better than ever before.
However, I read some real horror-stories about hardbricks on the Note as Samsung did some really bad work as always. (My next phone will be a Nokia Lumia anyway.)
So, what I wanted to ask: Can I root my phone and then install clockworkmod via ROM manager and then install the ROM via Clockworkmod without being exposed to an enormously high risk of a hard brick? My phone is currently on Android version 4.1.2.
I checked the phone with "Got Brickbug" and yes, I'm having it.
Any help would be appreciated
Thanks in advance,
M24o (No, this name is not inspired by a weapon..)
Best, easiest and hassle free way to get root and custom recovery is to download the philz kernel (the one corresponding to your ROM):
http://forum.xda-developers.com/showthread.php?t=1901191
you can do wipe, flash any custom rom, backup, restore and many more things on this.
Edit: download the zip file, put on ext sd, go to recovery select install zip from external storage, choose philz .zip file and that is it.
treacherous_hawk said:
Best, easiest and hassle free way to get root and custom recovery is to download the philz kernel (the one corresponding to your ROM):
http://forum.xda-developers.com/showthread.php?t=1901191
you can do wipe, flash any custom rom, backup, restore and many more things on this.
Edit: download the zip file, put on ext sd, go to recovery select install zip from external storage, choose philz .zip file and that is it.
Click to expand...
Click to collapse
Thank you, I've just read the thread, what I really like about it is that I can flash it from the phone. Thanks alot for this, those threads are the ones I am always looking for hours (and then find them) to make rooting bearable for my.
Thank you!
Current situation: pretty much complete newbie. I broke my factory OS after rooting it, I think I deleted something Settings needs, so anytime it needs to access settings I get "Unfortunately, Settings has stopped." I factory reset it hoping that would help, but now after loading it gets stuck on a cycling white screen reporting that error (I think it's trying to set up the phone.) The error message prevents me from doing the touch-four-screen-corners trick I've read about and bypass set up. So, stuck on phone setup errors as near as I can tell.
I do have my user apps backed up with TiBu, but couldn't get the recovery zip from TiBu to work. I downloaded CWM but didn't figure it out yet. Also unfortunately I can't get the USB drivers to work (the LGE Android MTP Device won't install), so I think my only way of getting files to my phone now is using the microSD cards.
I'd love some help! I think my factory OS is FUBAR, so I'm not trying to fix that, instead I'd rather just get a cool ROM loaded so I can continue learning with a working device with said cool ROM. I don't fully understand terms that I know I need to like "bootloader" or what CWM / TWRP actually does or how to use them (I need to make a custom recovery ROM?). Or where to get a cool ROM or which to pick, some step by step basics on from some experienced users would be fantastic! Thank you so much!
So you were on stock, rooted, backed up and then messed the ROM? Flash stock ROM again using LG Flash tool (there is a thread in the main section), it should not wipe your data but you'll lose root. Hard to fix if you're not sure about the problem and have no easy access to files. Just make sure you flash the correct version for your model (D405, D410hn, etc), preferably the same version you have now so you won't need a factory reset after flashing...
lfom said:
So you were on stock, rooted, backed up and then messed the ROM? Flash stock ROM again using LG Flash tool (there is a thread in the main section), it should not wipe your data but you'll lose root. Hard to fix if you're not sure about the problem and have no easy access to files. Just make sure you flash the correct version for your model (D405, D410hn, etc), preferably the same version you have now so you won't need a factory reset after flashing...
Click to expand...
Click to collapse
Thank you, this put me in the right direction. I ended up discovering that even though the " LGE Android MTP Device won't install," the flashing process worked with this program via USB anyway. I'm going to lick my wounds a bit before trying to flash a custom ROM. Thank you!
For the rom installation, after unlocking your bootloader and rooting, download the app Flashify from Google Play, then install TWRP or CWM zip file as recovery image. Then, from there, you can install custom ROMs or make backups of your phone, etc. A cool custom ROM I recommend is CyanogenMod, it ports newer versions for older devices. So, you can have Android 6.0.1 in your phone
Hello I'm not really that good with mobile tech so excuse my noobness but i decided to dive in and try to root my samsung s6. Here is step by step what i've done so far
Following a few tuts after backups i rooted my phone and verified it with root checker.
Next I downloaded a few popular root apps and removed a bunch of bloatware on the phone
Today I decided to try to install a custom ROM for my phone, after finding a suitable one for my model I proceeded with his guide:
http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-0-t3094423
Next I downloaded all the correct files (I'm confident I double checked)
Now I'm not sure if this is where I went wrong but I installed TWRP custom recovery first
Then I proceeded to install modem with Odin and that went fine it passed and phone restarted
But when I go to install bootloader under BL in Odin it just fails, tried 3 times same result
Can anyone suggest another step in troubleshooting this? If it helps I was running stock samsung os never tinkered with the phone before this
Any advice is appreciated and please let me know if there is any more info i can provide
Thanks
EDIT:
Ok so I posted this late last night after trying to figure it out for a while. This morning I left for work to discover I had no mobile capabilities at all. No data, call, text nothing. Last night I was connected to my wifi at home so I guess I didn't notice. This has been obviously brutal with no communication all day. I tried tinkering a bit with it (did a factory reset through TWRP, tried flashing everything through TWRP) and nothing really helped.
Now I'm not really sure how to proceed so any advice would help as I don't want to brick my phone. What I'm planning on doing next that is the only thing that makes sense to me (again I have very little experience with phones) is to:
1. Re-flash everything through TWRP
2. Re-flash using stock rom, stock bl, and stock modem using Odin
My questions are is there any particular order I need to do this in and also will I have to re-root the phone again after or will this just be the stock rom but still rooted?
Thanks again literally ANY ideas u can throw out here go a long way as I've opened myself a can of worms