Database Develop

Downgrading from L09C432B378?

I have Paul O'Brien's stock L09C432B136 ROM which used to serve me well but for sone reason when doing the 3 finger flash it comes up with software incompatibility error.
Does anyone have any ideas as to how to downgrade to marshmallow?

Use the beta rollback downloads from Huawei website

More info?

I must reinterate I've successfully upgraded via b136 to nougat but I thought that a full stock ROM is able to "take over" and completely flash stock ROM.

Go here http://consumer.huawei.com/uk/support/mobile-phones/p9_uk-sup.htm, or change for your relevant country
Go to dowloads
Download Rollback Package
Download Firmware
Expand Rollback package read instructions
Apply as per the Huawei instructions in the zips. Do not mess up the order or you will brick your phone
---------- Post added at 11:55 AM ---------- Previous post was at 11:54 AM ----------
The nougat firmware appears to need an intermediate firmware to part comlpete the rollback

Natchi said:
Use the beta rollback downloads from Huawei website
Click to expand...
Click to collapse
Natchi said:
Go here http://consumer.huawei.com/uk/support/mobile-phones/p9_uk-sup.htm, or change for your relevant country
Go to dowloads
Download Rollback Package
Download Firmware
Expand Rollback package read instructions
Apply as per the Huawei instructions in the zips. Do not mess up the order or you will brick your phone
---------- Post added at 11:55 AM ---------- Previous post was at 11:54 AM ----------
The nougat firmware appears to need an intermediate firmware to part comlpete the rollback
Click to expand...
Click to collapse
Thanks

Natchi said:
Go here http://consumer.huawei.com/uk/support/mobile-phones/p9_uk-sup.htm, or change for your relevant country
Go to dowloads
Download Rollback Package
Download Firmware
Expand Rollback package read instructions
Apply as per the Huawei instructions in the zips. Do not mess up the order or you will brick your phone
---------- Post added at 11:55 AM ---------- Previous post was at 11:54 AM ----------
The nougat firmware appears to need an intermediate firmware to part comlpete the rollback
Click to expand...
Click to collapse
I was on Eva-l09c432b178 and i have downloaded the rollback package for Europe and now my phone shows Eva-c900b300 (intermediate firmware)
After this i am still trying c432b136 full firmware, c432b182 as well on sd card dload via 3 button method, but i am stuck at 5% and fail. which firmware i should go for ?

I would use the firmware listed with the rollback package, I believe they are paired for the fact the work together. In my case for the UK the rollback package was paired with b166. Worked perfectly for me. Then you can apply b132,

still no luck with the c432b166 firmware provided in the link, i was on c432b378, i followed the instructions of rollback and now my fone show c900b300 but after that i am unable to apply EVA-L09C432B166, its stucks on 5% and fails, then fone shows message to restart.

k4fari said:
still no luck with the c432b166 firmware provided in the link, i was on c432b378, i followed the instructions of rollback and now my fone show c900b300 but after that i am unable to apply EVA-L09C432B166, its stucks on 5% and fails, then fone shows message to restart.
Click to expand...
Click to collapse
I got stuck on B300. What I did was use SRK tool to install TWRP & use that all wipe B300. With no OS I then used SRK tool to reinstall MM recovery. From there I installed the Paul O'Brien B136 from dload. If you are confident your B166 is good you might want to try that.

Problem solved, i was transferring the update.app files via data cable and i was getting errors, i just used a card reader and transferred the dload folder to sdcard and it was all ok. its strange but worked for me. now i am on c432b182

How to lower android 6 of p9 euro ?

Hello everyone, I'm using magicrainbow version 3. Now I want to go back to android 6.0 emuix 4.xx have not. It can be loaded via twrp or huawei's rollback file, or loaded via dload. I need to load via twrp because it dloads it with 5% error and stops it causing the machine to hang. Looking forward to everyone's help thanks.
Huawei p9 eva L09c432

Dinh Manh said:
Hello everyone, I'm using magicrainbow version 3. Now I want to go back to android 6.0 emuix 4.xx have not. It can be loaded via twrp or huawei's rollback file, or loaded via dload. I need to load via twrp because it dloads it with 5% error and stops it causing the machine to hang. Looking forward to everyone's help thanks.
Huawei p9 eva L09c432
Click to expand...
Click to collapse
If you were using MR v3, please be aware of post #3 in that thread that descrobes how to go by HWOTAs back to stock Android N, from MR v3
It was alse discussed many times in the same thread how to rollback from N to MM.
You can search through the MR v3 thread for rollback or roll-back and you will find posts describing the process
Generally, you must not rollback directly from MR v3 to Android A, it cannot work

First I have to go back to android N stock. Then use rollback to MM. very thank you for the help.: tốt:: tốt:

[GUIDE] Root nokia 5 android 8.1

what you need:
-your Nokia 5 (TA-1053, NOT SURE WHITH OTHERS)
-A computer (i use windows 10, x64)
-internet
-read this guide few times
*you must run android 7x, if not, you must downgrade to 7*
-turn your phone to download mode by holding <volume +> and <power> buttons
*follow TUT. from @wolfyapl*
+read this if you dont know how the script works
https://forum.xda-developers.com/nokia-5/how-to/guide-temporary-unlock-bootloader-to-t3746947
+download the script here and excute "unlock bootloader.bat" ( remember to prepare md5 code)
https://forum.xda-developers.com/nokia-5/development/small-batch-script-to-manipulate-t3764411
-then download this new twrp http://bit.ly/2MzpnZN and rename to "recovery.img" then replace the file in the script folder
-run "twrp flashing.bat" and dont reboot from the script when it complete processing, you must hold <volume +> and <power> till the twrp shows up
-install the oreo update .zip here http://bit.ly/2BqIUY0 and dont reboot yet
-go to 3-dot, select magisk root then restart your phone
-install magisk manager
-you are all set!
!There is English language in TWRP setting menu!

Many Thanks
Thank you Bro it worked for me

Can I update after rooting?

Abirm said:
Can I update after rooting?
Click to expand...
Click to collapse
you can't, if you update the twrp will disappear and stuck in stock recovery

alwaysbest said:
you can't, if you update the twrp will disappear and stuck in stock recovery
Click to expand...
Click to collapse
Is any way to get OTA updates so that the root is preserved? Even if there TWRP will be broken, the main thing is to keep the root access.

Can i not downgrade my phone to android 7 and just unlock the bootloader? or is it necessary to downgrade it? i have nokia 5 android 8.1 btw..

alwaysbest said:
you can't, if you update the twrp will disappear and stuck in stock recovery
Click to expand...
Click to collapse
What should i do if im stuck in stock recovery bootloop?

What to do next.. HELP
@alwaysbest
I downgraded my android to 7.1, then unlocked the bootloader. Problem is how to run that twrp, i renamed it to recovery.img and copied it to the ADB file, is this correct? or should i just type the command "flash recovery recovery.img"? and after downloading the oreo update zip in the last part, in what file should i put it in?
thanks in advance to anyone who will reply

@Always best can you please make a short video on this ,it would be nice

hmm... is that oreo belongs to igors 4pda ?

---------- Post added at 06:11 AM ---------- Previous post was at 06:10 AM ----------
[/COLOR]
vineet09i said:
@Always best can you please make a short video on this, it would be nice
Click to expand...
Click to collapse
@alwaysbest please make a video

md5 i generate not workingik
unfortunately i am stuck at trying to unlock the bootloader. thw md5 i generate isn't working. Brings an error. i just downgraded today and can't find a way to make it work

Help?!
Hey!
If the Android Pie update rolls out and I update. Will it brick my phone? And if it bricks my phone, how can I update without to brick my phone?
Thanks

Khanmodx said:
unfortunately i am stuck at trying to unlock the bootloader. thw md5 i generate isn't working. Brings an error. i just downgraded today and can't find a way to make it work
Click to expand...
Click to collapse
I'll try it soon (tomorrow). I'll report you the result.
Greetings from Germany

BotoxNoob said:
I'll try it soon (tomorrow). I'll report you the result.
Greetings from Germany
Click to expand...
Click to collapse
Hey noob, i did try it and it worked. Its a temporary unlock so everytime you will need to be doing it before flashing any thing.

Thanks for the reply ^^
Khanmodx said:
Hey noob, i did try it and it worked. Its a temporary unlock so everytime you will need to be doing it before flashing any thing.
Click to expand...
Click to collapse
Thanks for the reply.

Works perfect for me!
Thank you guy!

Someone has proved this method with a TA-1044 Android 8.1 ?

Yes pls. Wich Android version Is that firmware? And... This guide steps are the same?
I'm new with Nokia Phones, always have Motorola
---------- Post added at 06:35 PM ---------- Previous post was at 06:35 PM ----------
BotoxNoob said:
Yes. But you need the TA-1044 NBO Rom. Do you want the link?
Click to expand...
Click to collapse
Yes pls. Wich Android version Is that firmware? And... This guide steps are the same?
I'm new with Nokia Phones, always have Motorola

BotoxNoob said:
Oh... I think, there's no .nbo rom for your Device. But let me search a bit.
Click to expand...
Click to collapse
I have a Nokia 5 TA-1044 Dual SIM with Android 8.1

Working android emui 10 - lya-l29 c432 - dload

Hi,
We're all waiting for this famous update to Android EMUI 10?
I have a solution for you!
Test on version C432 Only!!!! test at your own risk on the other versions... I am in no way responsible for your actions.
/!\This method has the effect of resetting the phone!
> Remember to make a backup if necessary beforehand! (via HiSuite on computer for example)
I couldn't be held responsible for a possible phone brick or anything else, if you've never "tweaked" phones, just wait for them by OTA on HiSuite.
In the first case there you need a stock firmware, no superchouche of operator.
If you have firmware with superouche of operator, you must downgrade to version 9.1.0.310.
If you are on stock firmware and have version 9.1.0.346 or 9.1.0.0.347 you can switch to Android EMUI 10 directly if not you need at least to update your Phone to version 9.1.0.346 or 9.1.0.347.
If you are on firmware stock in 9.1.0.346 or 9.1.0.0.347
You are required to have a USB stick with a Type C -> USB adapter or a NanoSD.
1. Download the update file ANDROID EMUI 10 UPDATE CLICK TO DOWNLOAD
2. Extract the "Software" folder from the ZIP file
3. Format your USB key in "exFAT" format
4. Copy the "dload" folder that is located in the "Software" folder that you just extracted to the root of your USB/NanoSD Key.
5. Open your dialer and type "*#*##2846579#*#**" without the quotes
6. Click on "4. Software Upgrade" then on "Memory Card Upgrade"
7. Your phone will ask you to restart, do not disconnect the USB/NanoSD Key!
8. The update will done your phone will restart within 5 to 10 minutes (automatic default reset data)
9. Enjoy you are in Android EMUI 10
If you are in firmware with superchouche of operator
To get ANDROID 9.1.0.346/347 you need to drop to 9.1.0.310 to update to 9.1.0.346/347 without sim card inserted.
You are required to have a USB stick with a Type C -> USB adapter or a NanoSD.
Important /!\\
Remove your sim card during all operations, you could insert it only from the moment your phone is updated to 9.1.0.346 or 9.1.0.347, if you insert it before it will not work!
1. Download the update file ANDROID EMUI 9.1.0.310 UPDATE CLICK TO DOWNLOAD
2. Extract the "Software" folder from the ZIP file
3. Format your USB key in "exFAT" format
4. Copy the "dload" folder that is located in the "Software" folder that you just extracted to the root of your USB/NanoSD Key.
5. Open your dialer and type "*#*##2846579#*#**" without the quotes
6. Click on "4. Software Upgrade" then on "Memory Card Upgrade"
7. Your phone will ask you to restart, do not disconnect the USB/NanoSD Key!
8. The downgrade will done your phone will restart within 5 to 10 minutes (automatic default reset data)
9. Update your phone to version 9.1.0.346 or 9.1.0.0.347
10. Check your updates with HiSuite, then look at the file "SystemUpdate_xxxxxxxxxxxxx.log" in the folder :
"C:\Users\USERNAME\AppData\Local\HiSuite\log"
************************* full *************************
* udid:true
* VendorCountry:hw-eu
* C_Version:C432
* D_version000
* DashBoard:41.003.53.00.06
* DeviceName:LYA-L29
* packageType:full
* FirmWare:LYA-L29 9.1.0.347(C432E10R1P16)
* FirmWare_Base:
* FirmWare_Cust:
* FirmWare_Preload:
* Language:en_US
* OS:Hisuite_10.0.0.510- Windows 10 Enterprise 6.3
* SaleInfo:|eu|hw|N|EmotionUI_9.1.0|6,4 Go|4,29 Go|8_2,6GHz
************************************************************
Click to expand...
Click to collapse
11. C_Version must be C432 if it is not the case you had to start over until you have C432.
12. If you have C432 Follow the tutorial of the stock firmware.
If you want other firmware :
Firmware available :
10.0.0.154
9.1.0.310
9.1.0.300
9.1.0.266
9.1.0.238
MEGA FOLDER OF FIRMWARE
If you succeeded in dropping a thanks!
Thanks to Christophe.P & Boaddicted !!! from Huawei Forum for the firmware share and the manipulation

will this work with the C432E10R1P16 as well? unlocked phone newly purchased in Norway. Still waiting for the update to show up

Rogstrix said:
will this work with the C432E10R1P16 as well? unlocked phone newly purchased in Norway. Still waiting for the update to show up
Click to expand...
Click to collapse
What the version 9.1.0.xxx?

9.1.0.347

Rogstrix said:
9.1.0.347
Click to expand...
Click to collapse
Follow the guide with the firmware C432E7R1P5 I will works for you!

Will this work for lya-l09 c432

rhyhoxda said:
Will this work for lya-l09 c432
Click to expand...
Click to collapse
No sorry only for dual-sim model..
I don't have firmware for L09 (Single Sim)..

AllsGamingHD said:
No sorry only for dual-sim model..
I don't have firmware for L09 (Single Sim)..
Click to expand...
Click to collapse
Okay thank you, I'll stay put untill ota I think then

Will this work on 9.1.0.350 region is C605? Thanks!

rhyhoxda said:
Will this work for lya-l09 c432
Click to expand...
Click to collapse
It does work for LYA-L09 u have to change the zip names from LYA-29 to LYA-L09 it's all over the forum ...u people should really start reading the threads instead of constantly asking for answers...

dog121 said:
It does work for LYA-L09 u have to change the zip names from LYA-29 to LYA-L09 it's all over the forum ...u people should really start reading the threads instead of constantly asking for answers...
Click to expand...
Click to collapse
The way I see it. If unsure just ask, if the answer is elsewhere then you should just direct me there. I'd rather be certain than unsure

xrizonx said:
Will this work on 9.1.0.350 region is C605? Thanks!
Click to expand...
Click to collapse
No only for C432 version, sorry

dog121 said:
It does work for LYA-L09 u have to change the zip names from LYA-29 to LYA-L09 it's all over the forum ...u people should really start reading the threads instead of constantly asking for answers...
Click to expand...
Click to collapse
Flash LYA-L29 on LYA-L09 will cause a soft brick, test at your own risk..

rhyhoxda said:
The way I see it. If unsure just ask, if the answer is elsewhere then you should just direct me there. I'd rather be certain than unsure
Click to expand...
Click to collapse
Not being funny but if the op of this thread did his homework he would be giving u the right info..this emui 10 software is all over the forum all the information anyone needs is available all u have to do is read ...it's not rocket science..
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
AllsGamingHD said:
Flash LYA-L29 on LYA-L09 will cause a soft brick, test at your own risk..
Click to expand...
Click to collapse
No it doesn't do ur home work read the threads...

I'm currently on 9.1.0.338(C432E10R1P16), Still suitable for using this file/method?
Update: Tested the dload method and All OK.

dog121 said:
Not being funny but if the op of this thread did his homework he would be giving u the right info..this emui 10 software is all over the forum all the information anyone needs is available all u have to do is read ...it's not rocket science..
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
No it doesn't do ur home work read the threads...
Click to expand...
Click to collapse
I HAVE MATE 20PRO LYA L09
Yes, I changed the zip file name from 29 to 09, then I was able to update to EMUI 10. IT WAS A SUCCESS. THANKS , MATE.

xrizonx said:
Will this work on 9.1.0.350 region is C605? Thanks!
Click to expand...
Click to collapse
Do you have any dload official firmware files for c605? Thanks!
Sent from my LG-US998 using Tapatalk

Hi
2 questions:
1.My version is 9.1.0.346 c432e10r1p16 is it possible to flash this version with EMUI10
2. I have Stock 9.1.0.346 I insert SIM after Update latest Stock and now I have an Operator Patch is it possible to Flash now?
THX for help

Well merry christmas all, I used to package files above to update my phone from 9.0 stuck on the april patch to 9.1, then proceed with the 10.0 and now im bricked. Any help would be apprecited.

This work on 9.1.0.358???
Thank you

Rooting S9 on ANDROID 10 STABLE

Is it possible to root s9 on android 10 just like android pie with twrp fully working? If yes, then please reply...

Yes, I'm on android 10 rooted and twrp

danlivesey said:
Yes, I'm on android 10 rooted and twrp
Click to expand...
Click to collapse
how to?

How did you made it?

Nothing different as with Android P,
1. boot unlocked
2. installed twrp with odin.
3.Instantly restart in twrp after installing.
4. install magisk
works normal

Hi,
i cannot get my phone to reboot once twrp is installed.
Got any clue?
Thanks

Is there any procedure that properly roots Android 10 stable without leading to an infinite bootloop?

I am able to root but biometric stopped working.
Not sure how to fix that
---------- Post added at 08:26 PM ---------- Previous post was at 08:03 PM ----------
I am able to root but biometric stopped working.
Not sure how to fix that

Could you describe the process you followed for rooting?

g-gett said:
Hi,
i cannot get my phone to reboot once twrp is installed.
Got any clue?
Thanks
Click to expand...
Click to collapse
What device do you own?

it's a G960F
---------- Post added at 08:36 AM ---------- Previous post was at 08:24 AM ----------
TheMadScientist said:
What device do you own?
Click to expand...
Click to collapse
it's a G960F

Right, install twrp through odin, make sure you boot straight into twrp from download mode. Then wipe date and reboot recovery not the system. Then flash the multi disable zip from the download link. Then flash magisk and reboot. All done
https://drive.google.com/file/d/1TBp5hIrzIljYvOquI1H9L78YFtskxMDn/view?usp=drivesdk

So what if I already have twrp on my android 9 ,but now I wanna flash android 10

You got me there bud, My advice would to try a dirty flash to android 10 with Odin, but chances are you may need to flash twrp again not to sure.

Thanks, so what would I need to install twrp on my android 10(s9)

Just follow the instructions above with the link you need to flash that file after you flash twrp to stop the boot loop. Obviously you need Odin to flash twrp

Hi there does this work also for Andriod 10 latest UI2 on S9 ? Looking to root my S9 as well . Got it yesterday updated to the latest software . Tried to use it without root but too many apps that I use depends on it . Thanks

I have a Samsung G960f Singapore country, I want to use the Indonesian firmware base, can I do this?

febriasava said:
I have a Samsung G960f Singapore country, I want to use the Indonesian firmware base, can I do this?
Click to expand...
Click to collapse
You can do this as long as Indian firmware also labels as G960F. I am on Philippines and I'm using firmware from United Arab Emirates.

kyooohei08 said:
You can do this as long as Indian firmware also labels as G960F. I am on Philippines and I'm using firmware from United Arab Emirates.
Click to expand...
Click to collapse
must use g960f? or can it be g960fd or g960u or other?