i try to get into twrp and i only get black screens - Xiaomi Mi A2 / 6X Questions & Answers

hello everyone, for a couple of days i tried to put twrp on my xiaomi a2 so i can get root on it and custom roms (not now, but afterwards when i eventually get tired of the stock rom) but the only thing i get is a black screen (turned on) and seconds later it turns off. i tried using commands such as
" fastboot flash boot_b TWRP-3.2.3-jasmine-20180804.img "
"fastboot set_active b"
but nothing happens, i cant get into android, so i rebooted and went to "set_active a"...
i dont know what to do anymore im getting desperate, none of my past phones did this to me :crying:
im using android pie and compilation is 10.0.2.0

Try to go to fastboot, then to EDL mode with MI toolkit and then reflash stock

MaxImbrox said:
Try to go to fastboot, then to EDL mode with MI toolkit and then reflash stock
Click to expand...
Click to collapse
Edl mode? Well, I already flashed the stock rom trough Mi flash program

Related

BRICKED - Changing Mi 5X ROM to Mi A1 Via EDL

Hello everyone, just get frustrated right now my brand new 5X Half-Bricked after trying to flash stock fastboot firmware of the A1 through EDL with mi flash. just over excited of this devices, as i'm not a new one on this stuff and things, so that i ignoring some post said that the mi A1 rom won't run/boot compatible with 5X. (some interesting post right here about 3 Variants Hacked Bootloader http://en.miui.com/thread-840402-1-1.html)
I put whole things needed togather (fastboot firmware of A1, and Mi5X, also Twrp and some of unbrick zip from the thread above) so i was thinking when everythings gone crazy and bad i just need to reverting back to stock fastboot firmware of MI5X and everything works fine.
i do backup my QCN file so the worst thing i losted the imei and baseband i just need to restore that backup. Then i start the stupid things with proud.
flashing the Mi A1 sucessfully without any error on mi-flash then power it on boom, as i predicted it won't be as easier and simple as that step. some error text appeared on my screen some related to bootloader things, okay i just go into fastboot and unlocking with type "fastboot oem unlock" done with success and thats also said in terminal. okay then i rebooted (no panic at all), so the warning text still, then appeared your system has been destroyed, okay than i put the mi A1 recovery and flashing that through the fastboot, its said error no such partitions "recovery"??? (bit panic here) but trying to type "fastboot boot tissot.img" (tissot the codename of A1) its boot and send me into recovery, flashing some A1 rom for 5X from xda still won't boot at all (start panic here ).
so everything i try here flashing stock miui also won;t even boot and see the homescreen. I give up and OK i just need to flash the stock 5X through EDL, rebooting to edl and then flashing the stock 5X and success flashing done without any error, so i rebooted but its only stuck at MI logo then restart itself (really PANIC), so i get into recovery (stock MIUI) and mybe wiping whole data and cache will help, but there's no changes still restart/rebooting itself , okay i need to flash again this time i downloding Develover versions, and put the devices into edl through test point this time (as now the bootloader are relocked after flashing the stock one).
after flasing done the device still won't even boot at all just stuck at MI logo, now i really need help anyone any advices will really help, thanks
SH1M4BD3 said:
Hello everyone, just get frustrated right now my brand new 5X Half-Bricked after trying to flash stock fastboot firmware of the A1 through EDL with mi flash. just over excited of this devices, as i'm not a new one on this stuff and things, so that i ignoring some post said that the mi A1 rom won't run/boot compatible with 5X. (some interesting post right here about 3 Variants Hacked Bootloader http://en.miui.com/thread-840402-1-1.html)
I put whole things needed togather (fastboot firmware of A1, and Mi5X, also Twrp and some of unbrick zip from the thread above) so i was thinking when everythings gone crazy and bad i just need to reverting back to stock fastboot firmware of MI5X and everything works fine.
i do backup my QCN file so the worst thing i losted the imei and baseband i just need to restore that backup. Then i start the stupid things with proud.
flashing the Mi A1 sucessfully without any error on mi-flash then power it on boom, as i predicted it won't be as easier and simple as that step. some error text appeared on my screen some related to bootloader things, okay i just go into fastboot and unlocking with type "fastboot oem unlock" done with success and thats also said in terminal. okay then i rebooted (no panic at all), so the warning text still, then appeared your system has been destroyed, okay than i put the mi A1 recovery and flashing that through the fastboot, its said error no such partitions "recovery"??? (bit panic here) but trying to type "fastboot boot tissot.img" (tissot the codename of A1) its boot and send me into recovery, flashing some A1 rom for 5X from xda still won't boot at all (start panic here ).
so everything i try here flashing stock miui also won;t even boot and see the homescreen. I give up and OK i just need to flash the stock 5X through EDL, rebooting to edl and then flashing the stock 5X and success flashing done without any error, so i rebooted but its only stuck at MI logo then restart itself (really PANIC), so i get into recovery (stock MIUI) and mybe wiping whole data and cache will help, but there's no changes still restart/rebooting itself , okay i need to flash again this time i downloding Develover versions, and put the devices into edl through test point this time (as now the bootloader are relocked after flashing the stock one).
after flasing done the device still won't even boot at all just stuck at MI logo, now i really need help anyone any advices will really help, thanks
Click to expand...
Click to collapse
I think you should not unlock the bootloader using the command fast boot OEM unlock,you should go to http://en.miui.com/unlock/ here and download the app to unlock it, and when you flash a new rom which is not miui,you must keep it unlock,do not fastboot OEM lock,that will cause it can not go into system and stuck in logo
linjike said:
I think you should not unlock the bootloader using the command fast boot OEM unlock,you should go to http://en.miui.com/unlock/ here and download the app to unlock it, and when you flash a new rom which is not miui,you must keep it unlock,do not fastboot OEM lock,that will cause it can not go into system and stuck in logo
Click to expand...
Click to collapse
Nope, that's the basic things and i really know how it works, As for now i''ve no ways to go / reach the homescreen at all, so i can't put my mi account in setting and linked the device into my acccount, its useless using the miunlock tools. And i can only do that commands right after i converted mine to A1 firmwares.
hi, finally, i know what problem you met, because i have met the same problem, the solution is ,you go to the fastboot ,first unlock the devices, then fastboot reboot,then you find you go to the system, then you go back to fastboot,and last ,you need to use the miflash to flash the rom,and it should work fine now,it seem when you are locked,the miflash can not really work
Last news, damn lucky bastard i'am got replaced units, lets see does we'll have some aosp goodies soon..
linjike said:
hi, finally, i know what problem you met, because i have met the same problem, the solution is ,you go to the fastboot ,first unlock the devices, then fastboot reboot,then you find you go to the system, then you go back to fastboot,and last ,you need to use the miflash to flash the rom,and it should work fine now,it seem when you are locked,the miflash can not really work
Click to expand...
Click to collapse
Hi, it happened to my mi note 3. But not able to unlock in fastboot or mi unlock tool (prompted me adb been blocked by other program) . It's good if you able to help me. Thanks in advance.
Sent from my Redmi Note 4 using Tapatalk
samgcw said:
Hi, it happened to my mi note 3. But not able to unlock in fastboot or mi unlock tool (prompted me adb been blocked by other program) . It's good if you able to help me. Thanks in advance.
Click to expand...
Click to collapse
Use the mi unlock tool ,you can only unlock the phone when you are in fastboot mode,,turn off the phone,press the power and volume down bottom simultaneously,and you will be in fastboot mode

MI A2 back to Stock Rom

Hi guys!
I have a little problem. A couple of days ago I soft bricked my phone,and there was a boot loop. But fortunatelly today I found the solution and now my phone working again. But I would like to revert everything because I cant uptade the system. When I uninstall the Magisk,and I restart the phone, I fall into the same problem,I got the boot loop and a lot of things. So I know the solution how to get out from the boot loop,but how can I restore my phone? I want to make a clean install and lock the bootloader.
Sorry my bad english
Flash official rom with Mi Flash.
_Drifter_ said:
Flash official rom with Mi Flash.
Click to expand...
Click to collapse
Unfortunately It's not working because the bootloader locked. And I cant do anything in fastboot mode. The only working command is fastboot boot xy.img. With this command I can boot my phone.
EDL mode?
Perhaps using test point to force edl and flash the rom thought miflash.

My a2 fastboot disappeared

My MI A2 crashed on the home screen, so I thought to use the flash mi and put the rom stock in it to get back to the original, I had root and bootloader unlocked.
I used the xiaomi aplacative and installed the original rom, it worked but my fastboot mode disappeared, instead it's just a black screen.
Does anyone know a way for me to recover fastboot? I want to use gcam, for that I need root.
I think I'm in EDL mode which I entered to install the stock rom, but now I do not know how to get back to the fastboot.
Send pics i had the same problem it's black fastboot And mi.com logo
If you are in EDL mode, you could flash stock via MiFlash.
Arnaldo Cardoso said:
My MI A2 crashed on the home screen, so I thought to use the flash mi and put the rom stock in it to get back to the original, I had root and bootloader unlocked.
I used the xiaomi aplacative and installed the original rom, it worked but my fastboot mode disappeared, instead it's just a black screen.
Does anyone know a way for me to recover fastboot? I want to use gcam, for that I need root.
I think I'm in EDL mode which I entered to install the stock rom, but now I do not know how to get back to the fastboot.
Click to expand...
Click to collapse
Your fastboot should be working fine eventough it only shows black screen. If you flashed stock in EDL-mode it leaves splash partition out and that's why you have blank black screen in fastboot mode. You just need to flash splash.img in fastboot mode using code:
Code:
fastboot flash splash splash.img
.
I was able to solve the problem
I was able to solve the problem, I used the toolkit for the MI A2 provided by the friend "Daha3ker", I used the version V 1.0.5. This tool literally revived my smartphone and returned it to stock rom, until I was able to upgrade via OTA to the February update.
In the Toolkit menu I used option 3 (UNBRICK / REVERT TO STOCK). I want to express my thanks to Daha3ker for developing this tool and thanks to XDA.

pls help me, strangest bootloop ever

Hi can somebody help me? i was on caos gsi and i tried to flash with fastboot the new global miui 12,now my phone wont boot.
i mean i still can access to fastboot and i tried to flash the gsi back,now my phone is stuck on '"redmi powered by android" but it's stuck there,no bootloop at all and i still can access recovery and fastboot
NorternLights said:
Hi can somebody help me? i was on caos gsi and i tried to flash with fastboot the new global miui 12,now my phone wont boot.
i mean i still can access to fastboot and i tried to flash the gsi back,now my phone is stuck on '"redmi powered by android" but it's stuck there,no bootloop at all and i still can access recovery and fastboot
Click to expand...
Click to collapse
May be your fastboot process failed...try again or go to recovery and clean all usure data
i tried,but now my phone is a pricey brick.
never again an mtk devices.
I have suffered this situation few days ago, I was using platform-tool to install MIUI 12.01 recovery rom using flash_all.bat but got bootloop everytime. Then I tried to flash the fastboot rom via Miflash tool and finally it booted up, it also re-locked bootloader after flashing, but the phone is live again!
I also tried to Wipe User Data in Recovery ([Volume up] + [Power]) before flashed the ROM with Miflash. Didn't know if it'd fixed the problem.
Have you try spflash tool yet?
fortunately i was able to recover the device using miflashtool then i sold it and i bought a redmi 9s
dont buy mtk devices guys,worst experience ever
You must know what you do on MTK than its ok!!!
-CALIBAN666- said:
You must know what you do on MTK than its ok!!!
Click to expand...
Click to collapse
Mtk is made for poor people..if mtk is not available then we can not buy a smart phone....

Question Hi, just bricked my device

So, I was trying to flash a GSI Custom Rom on my device, I tried fastboot flash super ./system.img, and it didn't work. (fastboot screen)
I couldn't boot into fastbootd, because when I tried fastboot reboot fastboot, twrp appeared, device not recognized by fastboot devices, and touch not working.
So I rebooted into bootloader and tried to flash global rom, so I could get fastbootd but I realized that I could just flash boot.img, so I closed MiFlash before it was flashing super partition (bad idea) and tried to do fastboot flash boot ./boot.img.
It didn't work, so I rebooted it... black screen, stuck in EDL.
Then tried to flash global rom in MiFlash again, saw COM4, but tried to flash anyway. And I got "write time out, maybe device was disconnected."
Tried multiple times, the same message.
Holding Power + Vol Down didn't do anything.
And I need to ask you, is there any way to boot into fastboot and then into twrp or something, without Testpoints, and authorized Xiaomi account?
I don't quite have money, or something to repair.
Thanks.
flash this :https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharing, it's an engenering rom which works with edl mode. after the flash let the rom boot and reflash the rom you want.
Got the same error,
it flashed "prog_firehose_ddr.elf"
And then again write time out, maybe device was disconnected.
reversee said:
Got the same error,
it flashed "prog_firehose_ddr.elf"
And then again write time out, maybe device was disconnected.
Click to expand...
Click to collapse
Do you use the usb cable sold with the mi 11 ?
Pikaone41 said:
Do you use the usb cable sold with the mi 11 ?
Click to expand...
Click to collapse
Yes i did
reversee said:
So, I was trying to flash a GSI Custom Rom on my device, I tried fastboot flash super ./system.img, and it didn't work. (fastboot screen)
I couldn't boot into fastbootd, because when I tried fastboot reboot fastboot, twrp appeared, device not recognized by fastboot devices, and touch not working.
So I rebooted into bootloader and tried to flash global rom, so I could get fastbootd but I realized that I could just flash boot.img, so I closed MiFlash before it was flashing super partition (bad idea) and tried to do fastboot flash boot ./boot.img.
It didn't work, so I rebooted it... black screen, stuck in EDL.
Then tried to flash global rom in MiFlash again, saw COM4, but tried to flash anyway. And I got "write time out, maybe device was disconnected."
Tried multiple times, the same message.
Holding Power + Vol Down didn't do anything.
And I need to ask you, is there any way to boot into fastboot and then into twrp or something, without Testpoints, and authorized Xiaomi account?
I don't quite have money, or something to repair.
Thanks.
Click to expand...
Click to collapse
Hi
I had the same problem with k20 pro
The Emmc was distroyed.
So you need to go to a service center.
Hello, press volume + and power key at the same time when the phone turns on immediately press the volume key - but without releasing the volume + or the power key, this will take you directly to recovery twrp or to fastboot, hopefully we will solve it soon
Pikaone41 said:
şunu flashlayın: https://drive.google.com/file/d/1quyYpwV8IkZxnICZ2PEBXduuarxemlBI/view?usp=sharing , bu, edl moduyla çalışan geliştirici bir rom'dur. Flaştan sonra rom'un önyüklemesine izin verin ve istediğiniz rom'u yeniden yükleyin.
Click to expand...
Click to collapse
Dosyayı tekrar paylaşabilir misiniz?
reversee said:
So, I was trying to flash a GSI Custom Rom on my device, I tried fastboot flash super ./system.img, and it didn't work. (fastboot screen)
I couldn't boot into fastbootd, because when I tried fastboot reboot fastboot, twrp appeared, device not recognized by fastboot devices, and touch not working.
So I rebooted into bootloader and tried to flash global rom, so I could get fastbootd but I realized that I could just flash boot.img, so I closed MiFlash before it was flashing super partition (bad idea) and tried to do fastboot flash boot ./boot.img.
It didn't work, so I rebooted it... black screen, stuck in EDL.
Then tried to flash global rom in MiFlash again, saw COM4, but tried to flash anyway. And I got "write time out, maybe device was disconnected."
Tried multiple times, the same message.
Holding Power + Vol Down didn't do anything.
And I need to ask you, is there any way to boot into fastboot and then into twrp or something, without Testpoints, and authorized Xiaomi account?
I don't quite have money, or something to repair.
Thanks.
Click to expand...
Click to collapse
please use testpoint for edl and then flash the engineering rom and flash the global rom
mvikrant97 said:
lütfen edl için testpoint'i kullanın ve ardından mühendislik rom'unu yükleyin ve global rom'u yükleyin.
Click to expand...
Click to collapse
mvikrant97 said:
please use testpoint for edl and then flash the engineering rom and flash the global rom
Click to expand...
Click to collapse
When I plug in the usb cable, it acts as if it's in edl mode. no flash method worked, the only solution is the prog_firehose_ddr.elf file, unfortunately I can't find it for Venus 11

Categories

Resources