Related
Hi all ...
Today i show you how Root And TWRP Recovery for SM-J530F without any Problem
Part 1 : Root
ENABLE OEM UNLOCK and usb development
Note : all you data we will delete all Make sure take Backup !!
a) Download CF-Auto-Root from this link : https://download.chainfire.eu/1135/...y17lte-j5y17ltexx-smj530f.zip?retrieve_file=1
b) Flash with ODIN 3.10.7 in the AP slot.
c) Put your device in DOWNLOAD mode.
d) Load the CF-Auto-Root-j5y17lte-j5y17ltexx-smj530f.tar.md5 file below into the AP slot and hit start.
e) waiting finish, after finish you will see message ( you device is problem press Erase to fix ) press Erase and wait for Erase all data
F) after reboot,, again start in option " C "
g) Now after again Load the CF-Auto-Root file below into the AP slot and hit start. ,,, waiting finish and device is working again ,, you will see SuperUser
Congratulations !!
Now you can flash TWRP recovery form here :
https://forum.xda-developers.com/ga...twrp-samsung-j5-pro-twrp-3-1-10-v2-0-t3728233
Jest only do this :
Flash with ODIN 3.10.7 in the AP slot.
Put your device in DOWNLOAD mode.
Load the respective file below into the AP slot and hit start.
After flashing and ODIN reports PASS immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding POWER + HOME.
You should now see TWRP recovery.
this is all ,, Sory for bad English
Hi, can anyone confirm that this instructions works
SM-J530F/DS
Confirmed working! Thanks @Abdullah_a86 :good:
Twrp install errors
So, i flashed the twrp with odin after enabling 2 things in developer options .
Good, i entered the TWRP menu from phone and formated data , after that when i was trying to install the Magisk Root it always show errors like:
E: TOUCH_DRAG (or HOLD or REPEAT or RELEASE): and 2 numbers here like 575,1000 (example)
Please help me.
The phone is working but i think twrp is broken idk please help.
Thanks
Thanks!
who can, adapt to SM-J530FM recovery ???
(FM - version)
Does it work on the dual sim model?
Does it work on J530F/DS? The dual sim model, thanx in advance
Not working -- UNSTABLE !!!
Yesterday I've followed this root guide to root my J530F (NOT Pro-edition, NOT dual sim) and it worked great but for short time. The first root app I've installed is "Root Checker" to confirm that root is installed correctly - and it was. Then I was installing "Lucky Patcher" app and there was no prompt for root access from SuperSU. I went back to "RootChecker" it was telling me that my root is not available.
Then I rebooted my phone and I got famous Samsung "Black screen of death" - J5 logo appears and then blank, nothing on the screen. I got in Download mode without a problem, re-flashed my firmware (AP) and works fine.
Now it feels stupid, while I triggered KNOX to 0x1 and I don't have a root. I haven't tried this TWRP recovery because I'm afraid that it won't work and that I'll have to format my phone again and start from the beggining.
It is very important that you guys share your experience, so the other knows if this is working or not.
Anyone tried this custom TWRP Recovery???
in my Experience the best way to root j530f is trwrp+ refined kernel
wetito said:
in my Experience the best way to root j530f is trwrp+ refined kernel
Click to expand...
Click to collapse
Can you confirm that TWRP recovery from the first post is working?
Thanks!
Yes it works
wetito said:
Yes it works
Click to expand...
Click to collapse
I've just tried to install TWRP over stock firmware (not rooted) and I got bootloop. I can enter TWRP, but Android can't start. I guess I will wait for some time while stable custom recovery is released. I use this phone everyday, so I can't deal with all of these problems...
In my case root and recovery from this post is not working.
Hope there will be official solution soon.
Thanks!
Guys, someone please help, i have J5 PRO 2017 SM-J530G, i did a search on all XDA and did not found twrp for my model "G", found only for models Y and F, so i must ask if that version exists, and where i can find it ! Second question would be, if i can't find one especifically for G model, if i can use Y or F model of twrp ! thanks in advance for someone that can help !
NeleRS said:
I've just tried to install TWRP over stock firmware (not rooted) and I got bootloop. I can enter TWRP, but Android can't start. I guess I will wait for some time while stable custom recovery is released. I use this phone everyday, so I can't deal with all of these problems...
In my case root and recovery from this post is not working.
Hope there will be official solution soon.
Thanks!
Click to expand...
Click to collapse
Same problem in my case.
Hi. I have problems with the Google Assistant after rooting it. It stucks after telling it a command and suddenly crashes. Why does anything to do this with the root? Google Assistant and root haven't any relationship!!! I also have problems with an app called HelloTalk because it stucks in the chat screen too.
I had to flash my phone back to Stock ROM, because it gets stable again.
Thank you!
Enviado desde mi SM-J530F mediante Tapatalk
JaviLukiOficial said:
Hi. I have problems with the Google Assistant after rooting it. It stucks after telling it a command and suddenly crashes. Why does anything to do this with the root? Google Assistant and root haven't any relationship!!! I also have problems with an app called HelloTalk because it stucks in the chat screen too.
I had to flash my phone back to Stock ROM, because it gets stable again.
Thank you!
Enviado desde mi SM-J530F mediante Tapatalk
Click to expand...
Click to collapse
try root with magisk 14.0 and choose hide magisk
Abdullah_a86 said:
try root with magisk 14.0 and choose hide magisk
Click to expand...
Click to collapse
Where can I find the Magisk 14.0 patch for this phone model? I've never used this Root Manager.
Enviado desde mi SM-J530F mediante Tapatalk
JaviLukiOficial said:
Where can I find the Magisk 14.0 patch for this phone model? I've never used this Root Manager.
Enviado desde mi SM-J530F mediante Tapatalk
Click to expand...
Click to collapse
How to Install Magisk Latest Version 15.0 on Android [Non-Rooted Phones]
Download and install the Magisk v15 zip file from here:
http://magiskmanager.com/Magisk/Magisk-v15.0.zip
Place the zip file in your internal storage. Make sure that you remember the proper location of the zip file.
Reboot your phone into recovery ensure that you have a custom recovery such as TWRP is installed on your phone.
Now, click on the Install button in the TWRP recovery.
Download Magisk Manager
Navigate the Magisk-v15.zip on your internal storage or SD card.
Download Magisk Manager
Now, install the zip file on your device and wait till it is getting installed on your device.
Download Magisk Manager
You have successfully flashed the Magisk-v15.zip on your device.
Reboot your phone and see if it works on your device.
Download Magisk Manager
Download the magisk manager application from here: https://magiskmanager.com/Magisk/MagiskManager-v5.5.1.apk
Install the application by following the above procedure.
Open it and then you will see magisk is installed on your Android device.
Source :
https://magiskmanager.com/
Abdullah_a86 said:
How to Install Magisk Latest Version 15.0 on Android [Non-Rooted Phones]
Download and install the Magisk v15 zip file from here:
http://magiskmanager.com/Magisk/Magisk-v15.0.zip
Place the zip file in your internal storage. Make sure that you remember the proper location of the zip file.
Reboot your phone into recovery ensure that you have a custom recovery such as TWRP is installed on your phone.
Now, click on the Install button in the TWRP recovery.
Download Magisk Manager
Navigate the Magisk-v15.zip on your internal storage or SD card.
Download Magisk Manager
Now, install the zip file on your device and wait till it is getting installed on your device.
Download Magisk Manager
You have successfully flashed the Magisk-v15.zip on your device.
Reboot your phone and see if it works on your device.
Download Magisk Manager
Download the magisk manager application from here: https://magiskmanager.com/Magisk/MagiskManager-v5.5.1.apk
Install the application by following the above procedure.
Open it and then you will see magisk is installed on your Android device.
Source :
https://magiskmanager.com/
Click to expand...
Click to collapse
That web page is false. The same creator of the application has confirmed it in his thread
I think you should reference and post the links to the author's thread and not to a third-party page.
Sent from my Samsung Galaxy S8+ using XDA Labs
ASPViTo said:
Guys, someone please help, i have J5 PRO 2017 SM-J530G, i did a search on all XDA and did not found twrp for my model "G", found only for models Y and F, so i must ask if that version exists, and where i can find it ! Second question would be, if i can't find one especifically for G model, if i can use Y or F model of twrp ! thanks in advance for someone that can help !
Click to expand...
Click to collapse
Anyone can help?
So you bought a shiny new Chinese model, and want to convert to Global or EU version?
I had bought the Chinese version also, and couldn't find a solid method for converting to the Global or EU ROMs. I was worried i would brick my device like so many others! After finding bits and pieces in lots and lots of xda threads, MIUI forums, and finding some mis-information, i decided to put a working method all in one place!
**WARNING***
I am NOT responsible for anything that goes wrong or you have issues with the information i have provided, it worked for me and proceed at your own risk!
FIRST
Unlock your bootloader locked Chinese version phone! (It's a LONG wait)
see official unlock page here-->http://en.miui.com/thread-246705-1-1.html
After Bootloader Unlock
1.) Download TWRP from the page here-->https://forum.xda-developers.com/mi-8/development/recovery-twrp-3-2-3-0-mi-8-t3837745
-- RENAME YOUR DOWNLOADED RECOVERY FILE TO "recovery.img"
2.) Download the DM Verity Disabler here-->https://androidfilehost.com/?fid=3700668719832238534
3.) Download the Region Fix here-->https://www.androidfilehost.com/?fid=1322778262904000068
4.) Download a Global ROM / EU ROM of your choice!
Installing the TWRP Recovery:
Make sure you have a working copy of FASTBOOT on your computer compatible with Mi8 (I used the one in the directory from the Bootloader UNLOCK program)
1.) Copy all of your downloaded files to the Bootloader Unlocker main directory (or a directory with the Fastboot.exe file)
2.) Open a DOS shell prompt on your computer and change the directory to the Bootloader Unlock directory (or Fastboot.exe directory)
3.) Put your phone in to Fastboot Mode (Turn on phone and hold the Volume Down while also holding Power Button)
4.) Connect your phone via USB cable to your computer
5.) In your DOS shell prompt enter this between the quotes "fastboot.exe boot recovery.img"
6.) After your phone boots up with the TWRP, copy the recovery.img file to the main directory of your SDCard
(Your recovery should allow you to open your phones internal storage on your computer)
7.) Install from the TWRP recovery menu (choose IMG file on bottom right, and select the recovery.img from your storage, and choose the Recovery partition to flash to)
8.) After successful TWRP flashing to your recovery partition, Reboot to RECOVERY
Preparing & Flashing Your Downloaded ROM:
1.) Format your data (must be done from the wipe directory where you have to type the word "yes")
2.) after the format, once again reboot to your RECOVERY
3.) Copy your chosen ROM zip file, recovery.img file, Region Fix file, and DM Verity disabler file to your internal phone storage
4.) Install your chosen ROM (flash through TWRP)
5.) Flash your recovery.img file again! (choose IMG file on bottom right of screen, and select the recovery.img from your storage, and choose the Recovery partition to flash to)
6.) Flash the Region Fix file
** Optional of flashing Magisk (v17.1) now if you want **
7.) Flash the DM Verity disabler file
8.) Format DATA again (this removes all of your file from internal storage, so copy them back if you want after the format is done)
9.) Reboot to SYSTEM and Enjoy!
Some steps may be redundant or not needed, however -i spent countless hours in bootloops, reflashes, testing. This method works, and is what i follow every new ROM i install. I am now on the latest Miui10.8.9.6 Global.
Additional Notes:
DON'T downgrade versions of ROMs (ex, miui10 to 9, or miui9 to 8) Anti-Rollback isn't enabled to brick yet (it's only "1")
If you don't flash the Region fix on a Chinese phone, it will constantly reboot, during initial rom setup or won't even make it that far (wish i knew this before, it would have saved me many hours in bootloops)
If you want to STAY on Chinese rom versions with the bootloader locked, you CAN flash miui Chinese developer edition (ex miui10.8.30) using the internal software updater without issues (i did this while waiting for unlocking delay).
Placeholder
Holding
Great job ! A good idea for us
Thanks a lot.
I finally could install miui.eu.
Unfortunately i flash magisk but it doesn't root my phone.
Two questions:
First do i just have to flash magisk and dm verity after?
Then for flash another rom do i have to do all the steps again?
Adeline
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
bidouille1 said:
Thanks a lot.
I finally could install miui.eu.
Unfortunately i flash magisk but it doesn't root my phone.
Two questions:
First do i just have to flash magisk and dm verity after?
Then for flash another rom do i have to do all the steps again?
Adeline
Envoyé de mon ONEPLUS A3003 en utilisant Tapatalk
Click to expand...
Click to collapse
Yes, you have to flash dm verity after magisk. After you are booted, if magisk is installed did you try to update magisk from the app? It worked on global ROM for me.
I would forward all steps again, but up to you. If you report back a shorter method that works j can modify instructions.
I am also working on a fix for the Chinese region that keeps coming back with reboot. I know what needs done, and have fixed mine, i just need to modify the region fix zip.
Agimax said:
Yes, you have to flash dm verity after magisk. After you are booted, if magisk is installed did you try to update magisk from the app? It worked on global ROM for me.
I would forward all steps again, but up to you. If you report back a shorter method that works j can modify instructions.
I am also working on a fix for the Chinese region that keeps coming back with reboot. I know what needs done, and have fixed mine, i just need to modify the region fix zip.
Click to expand...
Click to collapse
I flash again magisk and it works.
Thanks for all
Envoyé de mon MI 8 en utilisant Tapatalk
Thanks for this as it really saves time reading bits of information. I took time to change the ROM as I didn't want to brick my phone. Some knowledgeable people on here will even be annoyed if you ask for clarifications and tell you to read! I basically followed most of the steps mentioned.
Hi,
Can I relock bootloader after change from chinese to global version?
johnny1836 said:
Hi,
Can I relock bootloader after change from chinese to global version?
Click to expand...
Click to collapse
Unfortunately, Xiaomi made a stupid rule, which is that you can't lock global roms with chinese phones. Starting with Mi 8.
Is this goin to work for phones already unlocked by seller account? Is it possible to use my account after this procedure?
@HugoYe
I thought it is solution for lock after flash CN -> Global.
@johnny1836
What do you exactly mean by fixing the problem. I'm still trying to find a solution for this. Keeping the BL open is really bothering me, as I am using the Official Global rom.
Any trick to not wait 720 hours for unlock?
ricksmad said:
Any trick to not wait 720 hours for unlock?
Click to expand...
Click to collapse
Flashing the Developer Chinese ROM took my wait down to 340 hours while i was locked.......
Agimax said:
Flashing the Developer Chinese ROM took my wait down to 340 hours while i was locked.......
Click to expand...
Click to collapse
Do you have a link? Thanks
Sent from my MI 8 using Tapatalk
ricksmad said:
Do you have a link? Thanks
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
I just used the official Chinese ROM link, back then it was miui10 8.8.30 and let the updater in the phone do it.
here is the official CHINESE DEVELOPER BETA of Miui10 8.8.31-->http://bigota.d.miui.com/8.8.31/miui_MI8_8.8.31_b99e4f5263_8.1.zip
http://bigota.d.miui.com/8.9.6/miui_MI8_8.9.6_2e668ca434_9.0.zip
This one?
Sent from my MI 8 using Tapatalk
ricksmad said:
http://bigota.d.miui.com/8.9.6/miui_MI8_8.9.6_2e668ca434_9.0.zip
This one?
Sent from my MI 8 using Tapatalk
Click to expand...
Click to collapse
no, that is a 9.0 beta, i wouldn't touch that one right now. I edited my post above with 8.8.31 ---still 8.1 based.
@Agimax So with your step I can't lock Chinese mi8 variant with global stable or dev rom ?
Hey Guys,
As we all know, our Zenfone 2 has a slightly different method for installing Magisk. It is often confusing to install Magisk Properly and there is sheer lack of proper guides and support for the same for our device.
I was recently looking to install magisk in order to get banking apps to work on my device and also get the play store device status to "Certified".
My Device is as follows:
Device: Asus Zenfone 2 | ZE551ML | 4GB RAM | 32 GB ROM
ROM: Lineage 14.1 Last Official Build and January 2019 Gapps (from openGapps)
Xposed: NO
Any other root modifications: NO
Now, you might be wondering what is the need of this guide.
Firstly, there are no threads that point to the procedure for installing latest Magisk (i.e. 18 and 18.1) for our devices.
I found it depressing taht we only had threads for Magisk 16 and 17.1 and none after that.
Secondly, the method i am going to show you, will work on all future versions of magisk. All very easily.
Thus this eliminates the need for multiple magisk version threads.
I would like to request you guys to report as and when a newer magisk version is released to report whether the method still works. So that we know this is still useful.
So lets start with the procedure:
1. A clean ROM is recommended without any modifications. Else all the effort would go waste if the CTS Test fails eventually.
So, backup your important stuff, format system, data, cache partitions in TWRP and clean flash your ROM of choice along with Gapps
2. Download Magisk from the Official Thread linked Here.
3. Download VerifiedBootsigner v8 from Here. This is designed by the Legendary Chainfire , the brains behind the legendary SuperSU.
4. I would recommed you to finish the setup of your device. i,e, ROM + Gapps first.
Then Reboot into recovery and flash Magisk zip downloaded from the link above in step 2.
5. After flashing Magisk, flash the VerifiedBootSigner v8 downloaded from the link above in step 3.
6. After successful flashing, reboot your Device and open Magisk Manager from the drawer. and Check your safetynet status.
7. You will get 2 green tics.
SUCCESS!
XDA:DevDB Information
Magisk Guide for Zenfone 2 (x86 Devices), App for all devices (see above for details)
Contributors
[email protected]
Version Information
Status: Stable
Created 2019-02-05
Last Updated 2019-02-05
Duplicate threads closed with links to this thread, as it was the original.
mattgyver said:
Duplicate threads closed with links to this thread, as it was the original.
Click to expand...
Click to collapse
Wouldn't this be placed in magisk..? Its technically not a app. Nor a port.
Also looks like spam post due to the 20times it was posted
Has anyone tried 19 on the ze551ml?
I couldnt get mine to boot.
Please, advise on magisk 19 - it's not working with this procedure
Candoris said:
Please, advise on magisk 19 - it's not working with this procedure
Click to expand...
Click to collapse
So any news? Did you successfully install it?
yannahzinha said:
So any news? Did you successfully install it?
Click to expand...
Click to collapse
Candoris said:
Please, advise on magisk 19 - it's not working with this procedure
Click to expand...
Click to collapse
jamesoh said:
Has anyone tried 19 on the ze551ml?
I couldnt get mine to boot.
Click to expand...
Click to collapse
Any update guys?
Did you follow the procedure?
Magisk -> Signature Verification zip ?
Does the boot.img get patched in twrp?
What error do you get?
Remember guys. If it boot loops, just flash the signature verification zip again. It will work.
And please report the success with a screenshot guys. It helps everyone.
19.1 patched works well now, all credit to Tensai™ on Telegram.
Candoris said:
19.1 patched works well now, all credit to Tensai™ on Telegram.
Click to expand...
Click to collapse
Thanks for sharing here! Gonna test right now <3
Candoris said:
19.1 patched works well now, all credit to Tensai™ on Telegram.
Click to expand...
Click to collapse
So, The method in this thread doesn't work? You tried this method? (Magisk Zip + Sig Verification Zip).
Please clarify here. If this method does not work, i'll get this thread locked.
yannahzinha said:
Thanks for sharing here! Gonna test right now <3
Click to expand...
Click to collapse
Hey,
You tried the method in the OP? Please revert.
[email protected] said:
So, The method in this thread doesn't work? You tried this method? (Magisk Zip + Sig Verification Zip).
Please clarify here. If this method does not work, i'll get this thread locked.
Hey,
You tried the method in the OP? Please revert.
Click to expand...
Click to collapse
I have tried the method indicated in this thread, it works for 18* versions of magisk, but didn't work for 19 (bootloops, unstable). I haven't tried it with 19.1, since I got a working patched 19.1, which I shared here. If you wish to lock the thread, you should indicate it is valid for up to ver 18. I am not sure how they got 19.1 to work with some kind of patch.
Candoris said:
I have tried the method indicated in this thread, it works for 18* versions of magisk, but didn't work for 19 (bootloops, unstable). I haven't tried it with 19.1, since I got a working patched 19.1, which I shared here. If you wish to lock the thread, you should indicate it is valid for up to ver 18. I am not sure how they got 19.1 to work with some kind of patch.
Click to expand...
Click to collapse
A person in the Zenfone 2 forums claimed that this method works. He flashed the verification zip and said it works. (And it should work)
Our bootloader needs a signed boot image to run. The Magisk zip does not sign the boot.img after patching on our devices.
The VerifiedBootSigner.zip basically signs the boot.img, so that the bootloader accepts it and does not bootloop. The Magisk post by the dev has this in his FAQ.
I wrote this up, so that users do not have to wait for someone to issue a patched zip (which does this exact same thing).
I tried flashing 19.1 on a device that my friend owns, and it worked. However i do not understand why some people here claim that this fails. Hence i came here to ask.
I still own this device, but i forgot to carry it on my trip. I'll be home next month and cant post screenshots till then. I wish somebody would step up and post screenshots using this method.
[email protected] said:
A person in the Zenfone 2 forums claimed that this method works. He flashed the verification zip and said it works. (And it should work)
Our bootloader needs a signed boot image to run. The Magisk zip does not sign the boot.img after patching on our devices.
The VerifiedBootSigner.zip basically signs the boot.img, so that the bootloader accepts it and does not bootloop. The Magisk post by the dev has this in his FAQ.
I wrote this up, so that users do not have to wait for someone to issue a patched zip (which does this exact same thing).
I tried flashing 19.1 on a device that my friend owns, and it worked. However i do not understand why some people here claim that this fails. Hence i came here to ask.
I still own this device, but i forgot to carry it on my trip. I'll be home next month and cant post screenshots till then. I wish somebody would step up and post screenshots using this method.
Click to expand...
Click to collapse
Look, it is exactly like I said: with your method 19.00 didn't work stably, basically you flash it, it works until your next reboot at which point it bootloops or some such, you try to install a module, it loops on you. This is for 19. 19.10 I got already patched and it works no probs at all. It's possible that the issue only affects 19 and not 19.10 which might work just fine with your method. I'm not trying to discredit your method in any way just saying exactly when and in which way I couldn't get magisk to work following your boot sign procedure. I am not qualified enough to look at the code an tell if the issue is with your method or with the magisk itself so I provided people with what worked for me from the moment it started working. No hard feelings.
Candoris said:
Look, it is exactly like I said: with your method 19.00 didn't work stably, basically you flash it, it works until your next reboot at which point it bootloops or some such, you try to install a module, it loops on you. This is for 19. 19.10 I got already patched and it works no probs at all. It's possible that the issue only affects 19 and not 19.10 which might work just fine with your method. I'm not trying to discredit your method in any way just saying exactly when and in which way I couldn't get magisk to work following your boot sign procedure. I am not qualified enough to look at the code an tell if the issue is with your method or with the magisk itself so I provided people with what worked for me from the moment it started working. No hard feelings.
Click to expand...
Click to collapse
Hey,
No hard feelings here too mate.
Thanks for the Heads-up!
magisk 20.1 stable + verified boot signer v8 works
Goodmorning everyone,
I own a zenfone 2 ZE551ML (android 6.0). After installing magisk manager 7.5.1, I downloaded the magisk 20.3 zip file as indicated by the app. I went to TWRP and launched the installation which ended successfully. Restarted the smartphone, it always returned to the TWRP screen, I have not found any way to start the operating system. Then I proceeded to install the VerifiedBootsigner v8 zip always from TRWP.
The initial configuration of the phone is restarted, only that it restarts after about 1 minute. After many reboots I managed to finish the initial configuration and I see that magisk manager is installed (I managed to start it and I see that the installation of magisk was also successful).
Now, how can I end these annoying reboots that don't actually allow me to use the phone?
Thanks to those who will be able to help me
-------------------------------------------------------------------
Buongiorno a tutti,
possiedo uno zenfone 2 ZE551ML. Dopo aver installato magisk manager 7.5.1, ho scaricato il file zip di magisk 20.3 come indicato dall'app. Sono andato in TWRP e ho lanciato l'installazione che si è conclusa con successo. Riavviato lo smartphone, ritornava sempre nella schermata TWRP, non ho trovato alcun modo per far partire il sistema operativo. Allora ho provveduto ad installare lo zip di VerifiedBootsigner v8 sempre da TRWP.
E' ripartita la configurazione iniziale del telefono, solo che si riavvia dopo circa un 1 minuto. Dopo molti riavvii sono riuscito a finire la configurazione iniziale e vedo che magisk manager è installato ( sono riuscito ad avviarla e vedo che anche l'installazione di magisk è andata a buon fine).
Ora, come posso far terminare questi riavvii fastidiosi che di fatto non mi permettono si utilizzare il telefono?
Grazie a chi saprà aiutarmi
jef_83 said:
Goodmorning everyone,
I own a zenfone 2 ZE551ML (android 6.0). After installing magisk manager 7.5.1, I downloaded the magisk 20.3 zip file as indicated by the app. I went to TWRP and launched the installation which ended successfully. Restarted the smartphone, it always returned to the TWRP screen, I have not found any way to start the operating system. Then I proceeded to install the VerifiedBootsigner v8 zip always from TRWP.
The initial configuration of the phone is restarted, only that it restarts after about 1 minute. After many reboots I managed to finish the initial configuration and I see that magisk manager is installed (I managed to start it and I see that the installation of magisk was also successful).
Now, how can I end these annoying reboots that don't actually allow me to use the phone?
Thanks to those who will be able to help me
Click to expand...
Click to collapse
You'd have to post logs for anyone to have any kind of chance of helping... The console-ramoops and/or lasg_kmsg would probably do the trick. Take a look here for details: https://didgeridoohan.com/magisk/MagiskHelp
I hope they are correct. i file sono sul drive . google . com
logcat.log
/file/d/1eWMrOgBy1oiE6Gvk8FYsOUJuOgiRyA7V/view?usp=sharing
pstore_console
/file/d/1nmrLyTzyb6_Auon-_OZgSAjtfV6zI4eP/view?usp=sharing
event.log
/file/d/1npdyrqH2UAysNhsjcLvQHuhrb6BKmWdj/view?usp=sharing
dmesg.log
/file/d/1GaulviR53dtfCMskiT6jmGklO8R9h9S4/view?usp=sharing
thanks
----
Spero siano corretti.
grazie
Update 4.04.:
I flashed the Stock ROM Version 4.21.40.352 to my phone.
Then unlocked my bootloader installed twrp recovery and did the procedure again:
Installed in twrp my magisk 20.4 and twice the VerifiedBootsigner v8 to be save and delete cache/davlik and restart.
Now no bootloops and i have now root from magisk!!!
Hello,
i have the same Problem with rebooting to twrp screen.
I have Resurection Remix with Android 7.1.2 and it was rooted.
Some Finace App would not work with rooted phones . I installed hideroot app and now i am not anymore rooted, bad because i didn't made a backup before.
I wanted to install Magisk.zip with the twrp recovery mode. I think it will not install because i am no root anymore? but it give no error out.
After installing and rebooting my phone it always return into twrp screen also install "signing boot image" but same result.
If i recover my backup from twrp (only boot) it will boot but no Magisk is installed (see in Magisk Manager).
So two question how i get root again and why i will not install?
edited:
i copied logfiles from twrp recovery to my sd card but i cannot read them, sorry
Best
Felix
I was able to get Magisk 20.3 working on a custom rom. I am using the Groovy Android thats running Android 7.1.2.
Here are my steps.
1. Download rom, and extract the 'boot.img'.
2. Download latest Magisk, then extract the Magisk APK file from the 'common' folder in the zip.
3. Download Gapps of your choice.
4. Download also the VerifiedBootsigner v8
5. Boot into TWRP recovery. I'm doing a clean install here, so go to Wipe--> Advanced wipe --> Select (Dalvik/ART Cache, System, Cache, Data,) and 'swipe to wipe'
6. The go to install, flash your rom, then flash Gapps.
7. Reboot, complete initial setup and go to file manager and find your extracted Magisk APK. Install it.
8. Make sure you're connected to internet, open the Magisk app, select install. Pop up will appear, select install.
9. Pop up with " Select Method" will appear, select "Select and Patch a File", then navigate to the boot.img file the you extracted in Step 1.
10. It will download Magisk files and patch your boot.img, when it finishes it will create a new file in the Download folder called magisk_patched.img
11. Boot into TWRP again, select 'Install', navigate to Download folder. Then press "install Image" button. Your magisk_patched.img will appear. Select it, then make sure you tick the "Boot" bullet in the "Select Partition to Flash Image" option. Swipe to confirm flash.
12. Then flash the VerifiedBootsigner v8.
13. Reboot system, Magisk works. Safetynet passed.
Guys, i know it is pretty early, but has anyone got the slightest idea on how to root this bastard?
Wouldn't call it a B lol, waiting for mine to arrive and would certainly love to root it also
Here is only guide i've found, and i have successful root:-
https://forum.xda-developers.com/galaxy-a71/how-to/galaxy-a71-root-unlock-bootloader-flash-t4047847
yes, would be nice to have a better root guide - the one you link to is very difficult to follow.
Yes the programmers language is different. Things are obvious to them that are not to most.
For example it says
WARNING: You can't downgrade anymore once you flashed U2 update !
In this sentence I assume that downgrade means to root.
Root
Se eu fazer root no meu a71 vou poder usa o samsung cloud?
Gdrc said:
Se eu fazer root no meu a71 vou poder usa o samsung cloud?
Click to expand...
Click to collapse
This is an ENGLISH ONLY forum
I did the following:
Unlock bootloader
Install with odin the latest stock rom
Download twrp and install it with odin
Reboot to twrp
Install magisk and multidisabler
In twrp wipe
And boot the device
Install magisk app.
hans3103 said:
I did the following:
Unlock bootloader
Install with odin the latest stock rom
Download twrp and install it with odin
Reboot to twrp
Install magisk and multidisabler
In twrp wipe
And boot the device
Install magisk app.
Click to expand...
Click to collapse
Where did you find TWRP Hans?
Hi Guys.
I am about to buy the realme x50 5g from aliexpress, is the version 6gb 64gb and I'd like to know if there is a global rom for that one. something to flash in.
Also I'd like to know if those bands are the same in china as in the USA? Because kimovil says that the phone will work with 4 of 5 band 4glte with global version VS. the 3 of 5 bands in the chinese version. Please advice guys,
Gus
Hello there,
I bought one from Aliexpress also. If you plan to unlock bootloader and flash custom ROMs, I would not suggest to buy from here.
99.99% of 6GB 64GB are RMX2025 and up until now there is no deep testing app that supports this model.
I found no custom ROMs for X50 5G either. There may be possiblities to flash GSI if you can unlock bootloader.
My suggestion is you look for RMX2051 model of Realme X50 5G on Aliexpress. There are some sellers that supply this model.
Since RMX2051 is the gauranteed model that will be able to unlock by deep testing app.
siamese007 said:
Hello there,
I bought one from Aliexpress also. If you plan to unlock bootloader and flash custom ROMs, I would not suggest to buy from here.
99.99% of 6GB 64GB are RMX2025 and up until now there is no deep testing app that supports this model.
I found no custom ROMs for X50 5G either. There may be possiblities to flash GSI if you can unlock bootloader.
My suggestion is you look for RMX2051 model of Realme X50 5G on Aliexpress. There are some sellers that supply this model.
Since RMX2051 is the gauranteed model that will be able to unlock by deep testing app.
Click to expand...
Click to collapse
My model is RMX2051 (12+256), The bootloader can be unlocked with deep testing app.
It is however, following the method of twrp, it returns a white screen on boot to the recovery or normal boot.
The device can still boot to the fastboot mode and adb can list the device. What can I do now?
tyu366 said:
My model is RMX2051 (12+256), The bootloader can be unlocked with deep testing app.
It is however, following the method of twrp, it returns a white screen on boot to the recovery or normal boot.
The device can still boot to the fastboot mode and adb can list the device. What can I do now?
Click to expand...
Click to collapse
Hi Bro,
What are you trying to do? I am not clear about that. You're trying to flash some custom ROMs?
Right now there is no specific custom ROMs for this phone. If you want to flash GSIs, you can do this without flashing TWRP or any custom recovery.
The process to flash GSI with fastboot is as follow:
1. Download GSI that you like here. But you need to check your phone model if it's A only or A/B and ARM or ARM64. I saw some apps that can check your phone for project treble support in Play Store. My best guess is A/B ARM64. So you need to look for GSIs of these types. My fav GSIs are LOS, AOSP, Havoc and Pixel.
2. Boot your phone to Fastboot mode.
3. Connect your phone to PC.
4. Run fastboot adb platform
5. unzip GSI file to ROM name.img and copy this file to your directory of fastboot adb platform
6. enter "fastboot devices" to check your phone connection with your PC.
7. enter "fastboot -w" or "fastboot erase userdata" to wipe all data.
8. enter "fastboot flash system <ROM name.img>" to flash GSI to system partition. This may take up to 10-15 minuts. Depending on the GSI file size that you flash.
9. enter "fastboot reboot"
After you see Realme logo, the GSI logo should show up soon and take some time for booting to the system. Otherwise this will be bootloop. This may be caused from unsuccessfully unlocking bootloader. However if you are certain that you unlock bootloader correctly, you can try the following steps.
The process to trouble shoot bootloop from flashing GSIs.
1. Download Stock ROM of RMX2051.
2. Connect your phone to PC.
3. Run fastboot adb platform
4. unzip boot.img and copy to your directory of fastboot adb platform.
5. enter "fastboot flash boot boot.img"
6. enter "fastboot reboot"
By the way, This link for TWRP for Realme X50 5G is here. I have not tested this since I don't have the phone. If this TWRP file still does not work for your phone, you can try flashing manually as the above process.
Hope this helps.
siamese007 said:
Hi Bro,
What are you trying to do? I am not clear about that. You're trying to flash some custom ROMs?
Right now there is no specific custom ROMs for this phone. If you want to flash GSIs, you can do this without flashing TWRP or any custom recovery.
The process to flash GSI with fastboot is as follow:
1. Download GSI that you like here. But you need to check your phone model if it's A only or A/B and ARM or ARM64. I saw some apps that can check your phone for project treble support in Play Store. My best guess is A/B ARM64. So you need to look for GSIs of these types. My fav GSIs are LOS, AOSP, Havoc and Pixel.
2. Boot your phone to Fastboot mode.
3. Connect your phone to PC.
4. Run fastboot adb platform
5. unzip GSI file to ROM name.img and copy this file to your directory of fastboot adb platform
6. enter "fastboot devices" to check your phone connection with your PC.
7. enter "fastboot -w" or "fastboot erase userdata" to wipe all data.
8. enter "fastboot flash system <ROM name.img>" to flash GSI to system partition. This may take up to 10-15 minuts. Depending on the GSI file size that you flash.
9. enter "fastboot reboot"
After you see Realme logo, the GSI logo should show up soon and take some time for booting to the system. Otherwise this will be bootloop. This may be caused from unsuccessfully unlocking bootloader. However if you are certain that you unlock bootloader correctly, you can try the following steps.
The process to trouble shoot bootloop from flashing GSIs.
1. Baixe o Stock ROM de RMX2051.
2. Conecte seu telefone ao PC.
3. Execute a plataforma fastboot adb
4. Descompacte boot.img e copie para o diretório da plataforma fastboot adb.
5. digite "fastboot flash boot boot.img"
6. digite "fastboot reboot"
A propósito, este link para TWRP para Realme X50 5G está aqui . Eu não testei isso porque não tenho o telefone. Se este arquivo TWRP ainda não funcionar para o seu telefone, você pode tentar fazer o flash manualmente conforme o processo acima.
Espero que isto ajude.
[/CITAR]
como vai amigo, também tive um problema ao instalar o twrp, tentei instalar por engano o twrp do x50 pro e agora meu display está branco, a impressão é que o twrp instalou, mas por algum motivo não aparece, então preciso de um twrp específico para este modelo, o link acima que você forneceu não está funcionando, podem me ajudar? muito obrigado
Click to expand...
Click to collapse
como vai amigo, também tive um problema ao instalar o twrp, tentei instalar por engano o twrp do x50 pro e agora meu display está branco, a impressão é que o twrp instalou, mas por algum motivo não aparece, então preciso de um twrp específico para este modelo, o link acima que você forneceu não está funcionando, podem me ajudar? muito obrigado
ofonseca said:
como vai amigo, também tive um problema ao instalar o twrp, tentei instalar por engano o twrp do x50 pro e agora meu display está branco, a impressão é que o twrp instalou, mas por algum motivo não aparece, então preciso de um twrp específico para este modelo, o link acima que você forneceu não está funcionando, podem me ajudar? muito obrigado
Click to expand...
Click to collapse
Hello friend,
Please use English in the forum. I translated your messages using Google translate.
"Like my friend, I also have a problem to install or twrp, I have to install by deceit or twrp of x50 pro and now my display is white, impressed that or twrp install, but for some reason it does not appear, so I need a specific twrp for this model, or link, that you are not working forneceu, can you help me? very obrigado"
What is your phone model no.? And what do you want to use TWRP for?
Right now there is no specific ROM for Realme X50 5G. You can flash GSI ROM if you like to.
Or your want to root your phone? Flashing Magisk may brick your phone.
Realme X50 5G is launched with Android 10. Android 10 is now dynamic /super partition.
I am not sure whether or not Magisk supports this yet.
You need to prepare Stock ROM for your phone in case you may brick your phone by rooting or flashing GSI ROMs.
siamese007 said:
Hello friend,
Please use English in the forum. I translated your messages using Google translate.
"Like my friend, I also have a problem to install or twrp, I have to install by deceit or twrp of x50 pro and now my display is white, impressed that or twrp install, but for some reason it does not appear, so I need a specific twrp for this model, or link, that you are not working forneceu, can you help me? very obrigado"
What is your phone model no.? And what do you want to use TWRP for?
Right now there is no specific ROM for Realme X50 5G. You can flash GSI ROM if you like to.
Or your want to root your phone? Flashing Magisk may brick your phone.
Realme X50 5G is launched with Android 10. Android 10 is now dynamic /super partition.
I am not sure whether or not Magisk supports this yet.
You need to prepare Stock ROM for your phone in case you may brick your phone by rooting or flashing GSI ROMs.
Click to expand...
Click to collapse
First of all I apologize for not using the English language, and secondly, I thank you for the prompt service of my question, my phone model is Realme x50 g5 (china) RMX 2051, I bought it here in Brazil, but unfortunately it it doesn't have multilingual, and I didn't like the system in English, so I tried an app to translate the Morelocar 2 system, but I couldn't install it because I didn't have superuser permission, I tried to install the TWRP that I found on the internet, it was for my model but I don't think it was, because after the installation via fastboot, the cell phone restarted and got the white screen, even installed twrp, but it doesn't appear, very strange. But the biggest problem is that the phone no longer turns on the system, it is only on this screen in recovery mode. Oh my God please help me !!!
I was watching here on the internet a program to install the original cell phone rom called MSM FLASH TOOLS, it is used for several OPPO, ONEPLUS and REALME cell phones. But I am not getting the necessary file, which is .OFP. The file I managed to download here has the extension .OZIP, and I am not able to convert.
ofonseca said:
I was watching here on the internet a program to install the original cell phone rom called MSM FLASH TOOLS, it is used for several OPPO, ONEPLUS and REALME cell phones. But I am not getting the necessary file, which is .OFP. The file I managed to download here has the extension .OZIP, and I am not able to convert.
Click to expand...
Click to collapse
Hello friend,
OK. I am willing to help you out.
1. We can start off by preparing Stock ROM for your phone and flash it. So your phone will be back to the initial state. Please check this link here.
2. And Unlock bootloader of your phone before customising your phone following this link here.
3. I found TWRP for your phone at these two links: here and here. Flash one of these that works for your phone.
After you have done 1-3, reply me again. And I will explain the next possible steps you can do to have your phone customised the way you possibly want.
siamese007 said:
Hello friend,
OK. I am willing to help you out.
1. We can start off by preparing Stock ROM for your phone and flash it. So your phone will be back to the initial state. Please check this link here.
2. And Unlock bootloader of your phone before customising your phone following this link here.
3. I found TWRP for your phone at these two links: here and here. Flash one of these that works for your phone.
After you have done 1-3, reply me again. And I will explain the next possible steps you can do to have your phone customised the way you possibly want.
Click to expand...
Click to collapse
Oops my great friend, God pay you for the help welcome !!!! I had already managed to access these two links, including one of these links that I installed TWRP that didn't work. So I started a search on the Chinese website because this phone is only marketed and supported by the Chinese. And I was already very tired when I managed to find a Chinese website, and I downloaded TWRP, which worked. Now what intrigues that the file is the same size as the one I had already downloaded, I think that when I downloaded it, it must have corrupted the file. My phone is already installed. This is the website I was able to locate (https://www.jkmeng.cn/14356.html). But the phone still has problems, because it is still in bootloop, when I try to restart it goes back to the bootloader, very strange. I also installed another file that said it ends this looping but it didn't work. I think I just have to reinstall the rom again. The site that you indicated to download the rom, also had already found, and I even already have the rom downloaded on my computer. But the rom is in a .OZIP file, can you tell if TWRP accepts this type of file? Thank you again....
ofonseca said:
Oops my great friend, God pay you for the help welcome !!!! I had already managed to access these two links, including one of these links that I installed TWRP that didn't work. So I started a search on the Chinese website because this phone is only marketed and supported by the Chinese. And I was already very tired when I managed to find a Chinese website, and I downloaded TWRP, which worked. Now what intrigues that the file is the same size as the one I had already downloaded, I think that when I downloaded it, it must have corrupted the file. My phone is already installed. This is the website I was able to locate (https://www.jkmeng.cn/14356.html). But the phone still has problems, because it is still in bootloop, when I try to restart it goes back to the bootloader, very strange. I also installed another file that said it ends this looping but it didn't work. I think I just have to reinstall the rom again. The site that you indicated to download the rom, also had already found, and I even already have the rom downloaded on my computer. But the rom is in a .OZIP file, can you tell if TWRP accepts this type of file? Thank you again....
Click to expand...
Click to collapse
Oh, I forgot to say that the botloader is already unlocked.
ofonseca said:
Oops my great friend, God pay you for the help welcome !!!! I had already managed to access these two links, including one of these links that I installed TWRP that didn't work. So I started a search on the Chinese website because this phone is only marketed and supported by the Chinese. And I was already very tired when I managed to find a Chinese website, and I downloaded TWRP, which worked. Now what intrigues that the file is the same size as the one I had already downloaded, I think that when I downloaded it, it must have corrupted the file. My phone is already installed. This is the website I was able to locate (https://www.jkmeng.cn/14356.html). But the phone still has problems, because it is still in bootloop, when I try to restart it goes back to the bootloader, very strange. I also installed another file that said it ends this looping but it didn't work. I think I just have to reinstall the rom again. The site that you indicated to download the rom, also had already found, and I even already have the rom downloaded on my computer. But the rom is in a .OZIP file, can you tell if TWRP accepts this type of file? Thank you again....
Click to expand...
Click to collapse
You are so good that you could find TWRP that works for your phone in Chinese website. If I were you, I wouldn't be able to find that.
By the way, for flashing Stock ROM, I mean you need to use Flash tools in one of the method 2-4 to flash Stock ROM.
Your situation is probably hard brick and need to reorganize the phone partitions. TWRP won't help you with this. TWRP is used to flash Custom ROMs, GAPPS, Magisk and some flashable files for specific purposes.
If you are certain that you unlock booloader then after you flash Stock ROM, your phone would be back on. I guess the Stock ROM in the link above should come with multiple language. Otherwise reply me again and I will figure out what method to do for multilanguage.
siamese007 said:
You are so good that you could find TWRP that works for your phone in Chinese website. If I were you, I wouldn't be able to find that.
By the way, for flashing Stock ROM, I mean you need to use Flash tools in one of the method 2-4 to flash Stock ROM.
Your situation is probably hard brick and need to reorganize the phone partitions. TWRP won't help you with this. TWRP is used to flash Custom ROMs, GAPPS, Magisk and some flashable files for specific purposes.
If you are certain that you unlock booloader then after you flash Stock ROM, your phone would be back on. I guess the Stock ROM in the link above should come with multiple language. Otherwise reply me again and I will figure out what method to do for multilanguage.
Click to expand...
Click to collapse
How's my great friend doing !!! yesterday after a lot of struggle I was able to install TWRP, and then I was able to install the official ROM of the REALME X50 5G (Chinese). But I am still having problems with the installation of the ROOT (magisk) because when I install on the cell phone the system does not work, it is on a red screen saying the phone is unusable. And I would also be grateful if you could get some information about a PERSONALIZED ROM, which is multilingual, for Brazilian Portuguese. Thank you very much for, and have a blessed week.
ofonseca said:
How's my great friend doing !!! yesterday after a lot of struggle I was able to install TWRP, and then I was able to install the official ROM of the REALME X50 5G (Chinese). But I am still having problems with the installation of the ROOT (magisk) because when I install on the cell phone the system does not work, it is on a red screen saying the phone is unusable. And I would also be grateful if you could get some information about a PERSONALIZED ROM, which is multilingual, for Brazilian Portuguese. Thank you very much for, and have a blessed week.
Click to expand...
Click to collapse
Hi friend,
I'm willing to help. However I have never successfully flash Magisk for Android 10+ so far. Android 10 has dynamic /super partition which combines such partiions as /system, /vendor. If it's possible to flash Magisk, I would suggest Magisk Canary. Copy boot.img from the official ROM that you flashed recently and use Magisk Canary to patch boot.img then you use this file to flash to /boot partition using this command in fastboot mode:
fastboot flash boot patched_boot.img
In some website said, flashing patched_boot.img need to specify the partition a or b using this command:
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
For Personalized ROM, I guess you probably mean Custom ROM for Realme X50 5G RMX2051. Right now there is no Custom ROM for your phone. There is only Generic System Image or GSI. You can flash this by following this tutorial here.
Before flashing GSI, your data will be gone. So back up all necessary data before doing this.
My steps to flash GSI is as follow:
1. boot to your bootloader
2. boot to fastbootd
fastboot reboot fastboot
3. delete /product partition to give more space to system partition
fastboot delete-logical-partition product
4. erase /system partition
fastboot erase system
5. download GSI ROM from here. Or you can search about GSI ROMs from the internet.
extract the ROM to system.img and flash it.
fastboot flash system system.img
6. disable vbmeta by downloading blank vbmeta.img in the attached file and flash it
fastboot --disable-verification flash vbmeta vbmeta.img
7. format data
fastboot -w
8. reboot to system
fastboot reboot
Flashing GSI has more then 50% chance of bootloop or bricked. But it's worth the risk if succeeded.
You can find many more GSI ROMs on the internet. Since there is no specifi custom ROMs for your phone GSI ROMs are the only choice for now. 99% of GSI ROMs are Global ROMs. And many GSI ROMs come with SU already. You don't need to flash Magisk. Just activate the SU then you can gain root access already.
Hope this helps.
Edit: You can install Treble check or Treble info app to check what archs your phone supports.
There are ARM32, ARM32 binder 64 or ARM64 and A only or A/B
My best guess is your phone is ARM64 A/B. So you need to look for this in the coded name of the GSI ROMs. Vanilla mean no GAPPS. You need to look for the name with GAPPS. Or you can flash MicroG for GSI ROM Vanilla later. Flashing MicroG require the GSI ROM with Signature spoofing feature to bypass security system check in order to install MicroG successfully.
siamese007 said:
Hi friend,
I'm willing to help. However I have never successfully flash Magisk for Android 10+ so far. Android 10 has dynamic /super partition which combines such partiions as /system, /vendor. If it's possible to flash Magisk, I would suggest Magisk Canary. Copy boot.img from the official ROM that you flashed recently and use Magisk Canary to patch boot.img then you use this file to flash to /boot partition using this command in fastboot mode:
fastboot flash boot patched_boot.img
In some website said, flashing patched_boot.img need to specify the partition a or b using this command:
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
For Personalized ROM, I guess you probably mean Custom ROM for Realme X50 5G RMX2051. Right now there is no Custom ROM for your phone. There is only Generic System Image or GSI. You can flash this by following this tutorial here.
Before flashing GSI, your data will be gone. So back up all necessary data before doing this.
My steps to flash GSI is as follow:
1. boot to your bootloader
2. boot to fastbootd
fastboot reboot fastboot
3. delete /product partition to give more space to system partition
fastboot delete-logical-partition product
4. erase /system partition
fastboot erase system
5. download GSI ROM from here. Or you can search about GSI ROMs from the internet.
extract the ROM to system.img and flash it.
fastboot flash system system.img
6. disable vbmeta by downloading blank vbmeta.img in the attached file and flash it
fastboot --disable-verification flash vbmeta vbmeta.img
7. format data
fastboot -w
8. reboot to system
fastboot reboot
Flashing GSI has more then 50% chance of bootloop or bricked. But it's worth the risk if succeeded.
You can find many more GSI ROMs on the internet. Since there is no specifi custom ROMs for your phone GSI ROMs are the only choice for now. 99% of GSI ROMs are Global ROMs. And many GSI ROMs come with SU already. You don't need to flash Magisk. Just activate the SU then you can gain root access already.
Hope this helps.
Edit: You can install Treble check or Treble info app to check what archs your phone supports.
There are ARM32, ARM32 binder 64 or ARM64 and A only or A/B
My best guess is your phone is ARM64 A/B. So you need to look for this in the coded name of the GSI ROMs. Vanilla mean no GAPPS. You need to look for the name with GAPPS. Or you can flash MicroG for GSI ROM Vanilla later. Flashing MicroG require the GSI ROM with Signature spoofing feature to bypass security system check in order to install MicroG successfully.
[/CITAR]
good night my friend!!! satisfaction in talking to you again. I thank you again for your return, but I tried to do a search here on the internet to find the GSI ROM but I was not successful. Do you have a specific website for me to download this rom? Another problem that I had on my phone, after I reinstalled the original system through TWRP, I can no longer transfer files or install applications, nor through Google Play, a message in English saying that the phone is locked for that operation. Do I have to change anything in the system configuration. Thank you very much for your attention.
Click to expand...
Click to collapse
guys
whos facing bootloop and no stock recovery just format data via fastboot and you can unitall the magisk by unstaller zip file via TWRP recovery
and just boot to TWRP and you will see white screen open all in one tools and install the magisk unstaller
now the device booting
hgyut said:
guys
whos facing bootloop and no stock recovery just format data via fastboot and you can unitall the magisk by unstaller zip file via TWRP recovery
and just boot to TWRP and you will see white screen open all in one tools and install the magisk unstaller
now the device booting
Click to expand...
Click to collapse
Please share the link to "all in one tools". Thank you for your suggestions.