My z1 c9603 stuck at sony logo after I flashed stock rom with flash tool
I plugged it again and flashed it still the same
In the end off flashing it says unplug usb and start your device and then debugging must be checked?
Idont remember but i may forgot to check usb debugging
How to fix it? ?
Related
HI Everyone.
My Xperia X8 is bricked as i have tried to install custom roms in my phone. Now it is stucked at the Sony Ericsson Logo screen and is not going any further.
I have tried to flash the phone using Flash Tool but it failed. After connecting it in flash mode, Flash Tool says to check the USB Debugging mode from within phone which is not possible as it is not working.
I have also tried Sony PC Companion to repair my phone but at the time of update it says that no new update is available for my phone.
I have also tried using Sony Update Service but it also failed.
What should i do now?
Since retyping is troublesome ...
Have a look at this post I wrote up in this thread
Edit: Follow the instructions carefully. As you can read in the thread the restore worked (and I resurrected mine from the same point where yours is stuck).
The "Flash Tool says to check the USB Debugging mode from within phone" can't come up if the phone is connected in "Download mode" (keeping the back button pressed while connecting the USB cable to the computer). The crucial part is that the phone is TURNED OFF at the step where you press the back button, and that you KEEP the button pressed until Flashtool starts to flash.
And install gordon gate's usb drivers
Hit thanks button.
Sent from my E15 using Tapatalk
I assume my brother full wiped his phone, I can't flash a ftf because apparently Usb debugging is turned off, I can't get onto recovery neither can I get past the white Sony Ericsson screen. What should I do?
Edit: No worries guys, managed to repair it via PCC.
hello everyone
i have problem with my x8 flash mode
my flashmode(green led) always disconnect/reboot after 15 second,it can't stay long, and it give me bootloop (stuck at se logo)
i have installed flashtool 0.9.8(also flashmode and x8 driver inside) and sony pc companion..
is there any solution?
thank you before
sorry for my bad english
Are you going in the flashmode correctly??
Tip:If you are flashin the kernel then dont connect the phone directly in flashmode..
First connect it simply and then connect it in flashmode when it prompts to do so..
make sure all Driver is installed correctly..
x8 driver, flashtool driver
check if your cable and x8 usb port is not broken or something else..
you say it enters flash mode for sometime
so check the drivers first and check the usb cable if it is damaged on the ports
or
if you want to flash a kernel you can use it even in your condition..
select the kernel you want to flash.. and when the dialog box appear saying connect mobile with usb then instantly connect it in flash mode...flashing takes less than 5 seconds.. and it even prevent your phone from reboot at that time...because phone cannot reboot during flashing...
if the problem goes away... then enjoy .
thanks for the reply guys
i have try other usb port and cable ,btw.still no luck
now i am going try flash kernel just like dagger n CnC-ROCK said
i will tell.if it works
just out of curiosity, is this problem have something to do with bootloader?
my problem finally solved
just like @dagger said,we must connect to flash mode when flashtool ask us to connect
thank you everyone
Hi,
I have a problem with my xperia x8. I was using minicm10 and during this i got rid of debugging on notification every time i connected the phone to usb so i turned off the debugging. The problem started now when i wanted to change the rom and kernel because of minicm10 being really slow. I connected the phone and flashed the kernel to the stock and when i turn the phone on it stops booting on "sony ericsson" sign and doesnt go any further.
I think that it happens this way because i have the usb debugging off but i cant change it cause i cant turn on my phone. SEUS says that everything is ok with it and there is no update for my phone.
So i ask if there is any other option for enabling debugging on in my situation or method for changing kernel so to make it work.
Please help, i dont want to go to the service.
You can repair with SEUS. It will download the 2.1 ROM and flash it directly to your phone. zi'm not sure whether the bootloader is locked again though. And did you format /system, /data and /cache before flashing stock kernel?
http://forum.xda-developers.com/showpost.php?p=35989425&postcount=4
Hi guys,
So I'll tell you the whole story here. I was on Lollipop, fully rooted with working XZDR recovery but phone seemed laggy so I decided to give it a full format with the newer firmware. So I backed up everything. Booted into recovery. Formatted the whole phone, then took out the SD card to load on the zip file from the PC. On inserting it, it wouldn't be detected so I tried to reboot into recovery using the inbuilt option but forgot that recovery too would have been deleted. Since then its just stuck on the Sony logo. It reboots by keeping the Power button and Volume Up pressed, but to no avail. I tried to flash the image using Flashtool but it doesn't recognize the phone when I try to connect it in Fastboot using the Volume Down during Reboot method. Nor do I get a blue LED on the phone. I guess it isn't entering Fast boot.
Please help out since its my daily driver. Help appreciated. Thanks
Oh hey guys managed to restore using Flashtool. Tried booting phone into Flash Mode again and idk how it worked this time. Breathing a sigh of relief.
Could you please explain in detail how did you managed to get out of bootllop....it seems i sucked exactly like you & now clueless....
First of all, try repair it with Pc Companion. If that doesn't work, try with flashtool.
Keep in mind, to enter flash mode, press volume down button and insert usb cable.
tried PC companion & got error 2003 (Unlocked Bootloader & rooted wont work it seems)
Flashtool, will give a try again....
As of now, i am able to go to the fastboot & can open files on my PC when connect phone via USB cable....
Phone not booting up normal/recovery mode....It just stucked with boot loops
Tried flashtool---Ended up with errors as attached pic
As i cant bootup my phone...USB Debugging option cant be ticked
I was running SlimLP (unofficial) while bricked my phone....
Anything on that please....
pranavd1980 said:
Tried flashtool---Ended up with errors as attached pic
As i cant bootup my phone...USB Debugging option cant be ticked
I was running SlimLP (unofficial) while bricked my phone....
Anything on that please....
Click to expand...
Click to collapse
Try installing Flashtool ver 0.9.10.2beta4 - you can see in this tutorial section #5: Device connected with USB Debugging off, ergo you dont have to have USB Debugging on: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
Norup58 said:
Try installing Flashtool ver 0.9.10.2beta4 - you can see in this tutorial section #5: Device connected with USB Debugging off, ergo you dont have to have USB Debugging on: http://forum.xda-developers.com/xperia-z/general/tutorial-how-to-flash-stock-roms-t2240614
Click to expand...
Click to collapse
if that is the case, i think that fsc script is the issue....can you highlight something on that????
pranavd1980 said:
if that is the case, i think that fsc script is the issue....can you highlight something on that????
Click to expand...
Click to collapse
Not sure what you mean....... all I can say is, Flashtool 0.9.10.2beta4 does not require USB Debugging to be turned on to work and I definitely didnt turn USB Debugging on before starting the root process. Later yes but not before.
Try it or not, thats up to you.....