Wortham Kernel
Legal Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
The source is now based on cleanslate by anayw2001
schedalucard, pwrutilx, bluschedutil, helix governor
zen, maple, fiops
500hz timer
Undervolt
Wakelock Blocker v1.1
backlight dimmer
Vibrate option (may not work)
Sweep2Sleep
32bit vDSO
wireguard
KCAL
What's Not Working
hotspot
Download Link
https://github.com/Camvar97/wortham_mata_kernel/releases
XDA:DevDB Information
Wortham Kernel Mata, Kernel for the Essential Phone
Contributors
camvar97
Source Code: https://github.com/Camvar97/wortham_mata_kernel
Version Information
Status: Beta
Created 2019-01-18
Last Updated 2019-02-19
What exactly is the vDSO for? Is it a virtual Dynamic Shared Object or am I looking at the wrong vDSO
gavinfernandes2012 said:
What exactly is the vDSO for? Is it a virtual Dynamic Shared Object or am I looking at the wrong vDSO
Click to expand...
Click to collapse
Yep
Installed and running great. No problems. Thanks for this.
Hi, after flashing videocam breaks in stock. Both in essential and in Google cameras.
Let me know if you need some logs for it.
After 3 secs of recording an error pops up and video is unplayable.
Except for that, great kernel!
feligoni said:
Hi, after flashing videocam breaks in stock. Both in essential and in Google cameras.
Let me know if you need some logs for it.
After 3 secs of recording an error pops up and video is unplayable.
Except for that, great kernel!
Click to expand...
Click to collapse
Always send logs when you encounter the error. The kernel is more tailored toward a custom ROM but it is compatible with stock for those that use it. Please reproduce and send logs. Thank you.
goodest karnel for mata phone!¡!¡!¡!¡! essential phone good mata kernel 2019
FYI video recording works in R10 even if not stated in the changelog. So great work dev and keep it up!
Hitmax117 said:
FYI video recording works in R10 even if not stated in the changelog. So great work dev and keep it up!
Click to expand...
Click to collapse
Haven't changed anything that I'm aware of lol
BTW R11 SHOULD BE TODAY
R11 Released
I cant seem to find anything about "vibrate option" other than it is related to qualcomm haptic based on the qpnp-haptic documentation from googlesource. What features does this bring with it? Improved haptic feedback? Feedback based on audio? I cant seem to find any information on it
luigi311 said:
I cant seem to find anything about "vibrate option" other than it is related to qualcomm haptic based on the qpnp-haptic documentation from googlesource. What features does this bring with it? Improved haptic feedback? Feedback based on audio? I cant seem to find any information on it
Click to expand...
Click to collapse
I forgot to remove the feature in the list, you should be able to set the vibration strength in a kernel tweaker application. unfortunately the feature for whatever reason doesn't stick past reboot.
R12 Released, sorry for delay! its currently my exam weeks at school.
thanks for your work, this kernel works fine on my stock rom, and i have to set the governor back to schedutil as i found schedallucard consume more power than normal schedutil, and I have to enable wakelock blocker manually in EXKM, everything else is good. oh...and backlit dimmer is disabled by default, I think is it possible to enable such feature as u mentioned on first page by default? thank you
Hey, op you think your kernel will work with the new android Q release approaching on stock rom?
Thanks!
Related
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
Support for Governors---
Interactive
Performance
PowerSave
Userspace
Optimizations and Tweaks---
Disabled CRC-Check for upto 30% faster I/O.
Support for Dynamic-FSync (adjusts FSync according to usage resulting in a significant boost in the I/O performance).
Reduced RQ Lock-Contention for upto 0.7% increase in Performance.
Install
Copy the zip to your external or internal memory
Boot to twrp
Select the zip.
Reboot to system
Download-- Note 3 Neo (3g/4g)
XDA:DevDB Information
FireKernel for LP (5.1.x) ROMs (3g/4g), Kernel for the Samsung Galaxy Note 3 Neo
Contributors
FireLord, franciscofranco,Shoaib05
Source Code: https://github.com/FireLord1/android_kernel_samsung_smdk5260/commits/FireKernel-lp
Kernel Special Features: battery life
Version Information
Status: Beta
Created 2016-10-08
Last Updated 2016-10-08
ChangeLog
v1
Code:
FireLord1 - script: use google gcc 4.8
franciscofranco - Reduced RQ Lock-Contention for upto 0.7% increase in Performance
Shoaib0597 - Optimized task_sched_runtime for upto 20% increase in Performance
Shoaib0597 - Added support for CRC Toggle
Shoaib0597 - Reduced OverHead
Shoaib0597 - Enabled ARCH-Power feature
Joonsoo Kim - slub: fix a possible memory leak
franciscofranco - Remove '+' symbol from kernel version string
franciscofranco - drivers: mmc: according to the comment left by the original author disabling a cyclic redundancy check on data blocks by yield a a performance improvement hovering ~30%
Francisco Franco - backport https://lists.linuxfoundation.org/pipermail/ltsi-dev/2013-December/002683.html from Kernel 3.10 workqueue: use a higher bit to give more space to actual non-internal flags
franciscofranco - ksm: check and skip page, if it is already scanned
franciscofranco - sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire. From http://ripke.com/loadavg/moire
franciscofranco - Added fsync on/off support.
Greg Kroah-Hartman - Linux 3.4.40
FireLord1 - Linux: FK: r1
FireLord1 - script: zip: add building script and all
FireLord1 - defconfig: renamed to match script
Reserved
* This is my Kernel from osprey (moto g3). this may not have much features as compared to my first kernel release bcz that is for qcom and in exynos i cant do much BUT ill try to maintain main thing which is common. i.e battery life
* osprey: http://forum.xda-developers.com/2015-moto-g/orig-development/firekernel-v1-0-mm-6-0-x-roms-t3401538
* This is for single sim exynos galaxy note 3 neo.
* Compatible with all the custom roms.
* Can work for stock rom too but one thing will not work that is USB PC connection bcz i have edited the files for cm so..
* Its still using google GCC, will test uber GCC if that seems stable ill cook and give here.
* Well not much features but but.. ill upstream till 3.4.112 one Day!
* As always i dont own note 3 neo but i like to make stuff for it. Thanks to my testers 3g and 4g both.
It's very nice to see this Kernel coming from our osprey. It's the nice kernel for Osprey. Hope it's smooth & stable like osprey for exynos too
Huge kudos for you to work on 'Exynos' like SoC. Best of luck.
Thank you for your dedicated work brother. Appreciate it, and keep it up ?✌?
Thanks, waiting for N7502 custom ROM
Good job @FireLord
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
JimmygreecePanathinaikos said:
It doesn't save wifi when I reboot...I am on stock Why? :/ please help me cause I really need a costume kernel and I really appreciate your work! @FireLord
Click to expand...
Click to collapse
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Sent from my MotoG3 using Tapatalk
FireLord said:
Wooah. Sorry to hear that.. Can you tell your device? I'm not sure if I can fix..
Click to expand...
Click to collapse
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
JimmygreecePanathinaikos said:
Samsung galaxy note 3 neo 4g version stock Android 5.1.1 Thanks for the fast reply I hope you will find something to fix this.. You always do!!
Click to expand...
Click to collapse
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
FireKernel for SM-N7507 (hlltezt)
This is FireKernel with fixed Deadlock bug
Download: AFH
FireLord said:
umm dunno how stock works.. try deleting /system/lib/module (whole module folder) it is not required cuz kernel has it inbuilt now.. please make backup before doing anything
Click to expand...
Click to collapse
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
JimmygreecePanathinaikos said:
I always have backups... You don't say on the steps if we have to do a simple wipe/cache after installing the rom.. Could this be my problem for no savings wifi passwords after reboot??
Click to expand...
Click to collapse
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Sent from my MotoG3 using Tapatalk
FireLord said:
Yea try wiping after flashing kernel.. But hey? Why you keep on rebooting ?
Click to expand...
Click to collapse
I installed a xposed module after your kernel so I had to soft reboot
JimmygreecePanathinaikos said:
I installed a xposed module after your kernel so I had to soft reboot
Click to expand...
Click to collapse
Oh.. Then try wiping cache
Sent from my MotoG3 using Tapatalk
Thx for your work. Will try the new kernel with stock rom in a few days.
Sent from my SM-N7505 using XDA-Developers mobile app
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
moss20 said:
does this kernel fix camera issue or calling audio in cm-based roms ?
SAMSUNG Galaxy Note 3 neo
Click to expand...
Click to collapse
Its just custom kernel.. Not bug fixing kernel please test it may fix
Sent from my MotoG3 using Tapatalk
biggoof75 said:
Thx for your work. Will try the new kernel with stock rom in a few days.
Click to expand...
Click to collapse
When you try please tell us if your wifi passwords are deleted after every reboot
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
Made yank battery profile as default for zzmoove
Added optimax governor
Added alucard governor
Increased rate of charging
Spectrum support
Vibrator intensity control.
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the latest zip from https://www.androidfilehost.com/?w=files&flid=197263
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
CHANGE IO SCHEDULER TO ZEN FOR BETTER BATTERY BACKUP.
ENABLE USB FASTCHARGE FROM KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in https://t.me/Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Update( 23/07/17):
No much changes in this one as I was little busy. Sorry!!!
Now u can actually control vibration intensity thorugh kernel tweaker
Added Governors:
Lionheart
Darkness
Dancedance
LZ4 Compression for faster booting.
Network speed enhanced.
Set governor to either zzmoove or nightmare and reduce maximum frequency around 1500 for better battery life.
If you feel phone is laggy increase the frequency!
Do report if you face any issue or if you need any new feature to be added.
V2.0
New build is up !!!
Link: https://www.androidfilehost.com/?fid=745425885120753737
Changelog:
UKM works perfectly (for synapse)*
Cleaned the zip file(fix for bootloop in aex and nr)
Added fpboost
Added FIOPS iosched
Added Alucard Hotplug*
*Governors can now be changed using synapse.
*Enable Alucard Hotplug for extreme battery saving. Device may slow down and lag. Increase max freq to keep it stable.
NOTE:
For better battery , set governor to zzmoove and max freq around 1.2k-1.5k and also keep 2 or 3 cpu's online .
For more feature request and issue report pm me!!
Will possibly change the bootsplash logo in next build .
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @shubh84 for testing
@Anush12133 @Martichou
Source : https://gitlab.com/Srijith2001/StarCity_ham
Is it stable..??
It has yank battery extreme profile ??? it is good with zzmove governor.
himanshu fulmali said:
Is it stable..??
Click to expand...
Click to collapse
Yup
Safetynet isn't bypassing
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in @SRIJITH2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandey for helping with source
@Chaitanya @sk284 for testing
Click to expand...
Click to collapse
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Bro whats your sot..??
sumanth26 said:
Safetynet isn't bypassing
Click to expand...
Click to collapse
Enable magisk hide root and try. If it doesnt then the feature is not present in the rom.
Depends on the rom also. Kernel supports safetyNet bypass but rom should have that feature to bypass.
himanshu fulmali said:
Bro whats your sot..??
Click to expand...
Click to collapse
6-7 hrs in RR
ashokram343 said:
was it a rom or something else am on nogat lineage os 14.1 and my fingerprint was not working actually there no option to unlock my phone with fingerprint any help with regarding that if it install this will it work
Click to expand...
Click to collapse
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Srijith Bharadwaj said:
Its a kernel read op. Flash firmware and reflash the rom if have flashed nougat rom directly from lollipop.
Click to expand...
Click to collapse
could you please give step by step information so that i wont make any mistakes please
ashokram343 said:
could you please give step by step information so that i wont make any mistakes please
Click to expand...
Click to collapse
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Srijith Bharadwaj said:
Download nougat firmware.
Reboot to recovery
Wipe everything other than internal and otg
Flash nougat firmware and then flash the rom.
Fingerprint should work .
If not then fastboot cos and find if it works in it.
If it doesn't work in cos also then it's hardware issue.
Click to expand...
Click to collapse
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
ashokram343 said:
hey thanks for the reply what is COS mean and one more thing i had installed mm nightlies fingerprint worked there
Click to expand...
Click to collapse
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Srijith Bharadwaj said:
Cos is cyanogen os.
U wld have jumped directly from lollipop to nougat so u faced fingerprint issue. Now as u r back to marshmallow fingerprint is working. Now u can flash Nougat rom and u wll have fingerprint option.
Click to expand...
Click to collapse
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Flash zui 2.5 and then flash any other N roms
ashokram343 said:
i was back to nougat so that i mentioned its not working but as you said i came from directly to nougat from lollipop but after asking same qes in forum they said this same method but nothing worked for me so is there any way to fix or i have to stick to mm will there be any solution for nougat roms users like me where i found multi window as an better option
Click to expand...
Click to collapse
Bro flash ham nougat firmware and then flash N rom. Your fingerprint should work after this.
Synapse
Srijith Bharadwaj said:
Kernel for ZUK Z1:
Code:
/* *** Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I decided to compile a kernel for this devices out of interest and also lack of development in kernel for it.
My aim is to make users happy by providing all the features possible.
Features:
Compatible with all N roms.
Zzmoove govenor for good battery.
Intelliactive and nightmare governors.
SIO, SIOPLUS and ZEN io schedulers.
U-touch supported
Fast charging enalbe (charges phone around 1.5 to 1.75 hrs)
Faux Sound control
kcal control:Colors, Saturation, Hue, Contrast and more
SafetyNet bypass support
More features yet to come!!!
Steps to Install and flash StarCity kernel:
* Download the zip from https://www.androidfilehost.com/?fid=961840155545580230
* Reboot to recovery
* Recommended to take backup.
* Wipe cache and dalvik.
* Flash the kernel.
* Reboot
* Install your preferred kernel tweaker(synapse and ex kernel manager recommended)
CHANGE THE GOVERNOR TO ZZMOOVE USING KERNEL TWEAKING APP.
For feature request and any issue pm me, for faster reply telegram me in Srijith2001 or mail at [email protected] .
Get Ready to enter into StarCity!!!!!!
Credits:
@ankurpandeyvns for helping with source
@Chaitanya @sk284 for testing
Source : https://github.com/Srijith2001/StarCity
Click to expand...
Click to collapse
Users reported that synapse wasn't working so i checked it and fixed it. Now u can download the new zip from https://www.androidfilehost.com/?fid=961840155545580384 . Use the same procedure to flash.
Sorry for the inconvenience caused.
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
raza_maestro said:
I flashed the kernel on nuclearom 7.1.2 as instructed in the op by clearing cache and dalvik but it ended in a boot loop.
I did something wrong?
Click to expand...
Click to collapse
Some other users too faced this problem. I will check to it bro. Will be fixed in next build.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
WhitePugKernel by joe2k01Based on OpenKirin's source, you'll have same bugs as in RROS
How to install:
Download the flashable zip
Boot in TWRP
Flash zip
Reboot and you're done
Feautures:
Added blu active governor
Added alucard governor
Added darkness governor
Added bioshock governor
MSDOS fylesystem support
HFS filesystem support
HFS+ filesystem support
zen I/O scheduler
sio I/O scheduler
fiops I/O scheduler
tripndroid I/O scheduler
Option to disable fsync
Disabled detection of unclocked bootloader bt SafetyNet
Faster fingerprint wakeup
Nvidia power patches
Take care because I don't own the device, it has been tested anyway
Donate to IARC or SaveTheChildren
https://www.iarc.fr/en/about/donations.php
http://www.savethechildren.org
Downloads:
V1: Download
V2: Download
XDA:DevDB Information
WhitePugKernel for the Honor 8 Pro, Kernel for the Honor 8 Pro
Contributors
joe2k01
Source Code: https://github.com/joe2k01/WhitePugKernel-huawei_hi3660
Kernel Special Features:
Version Information
Status: Testing
Created 2017-07-08
Last Updated 2017-07-12
Fast work there man.
Sent from my Honor 8 using XDA Labs
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
smouker said:
Thanks for your work.
Im unable to flash the zip... It says unsupported device.
Got the DUK-L09C432 model
Cheers
Click to expand...
Click to collapse
Thank you for testing. Can you send me your build.prop and I'll fix? Probably I used wrong device name for secure flash.
---EDIT---
Sorry I just realised I linked Honor 8 kernel instead of 8 Pro, going to fix op
OP is fixed, now you shouldn't have any problem @smouker
joe2k01 said:
OP is fixed, now you shouldn't have any problem @smouker
Click to expand...
Click to collapse
Thank you for your work.
I was able to flash the kernel.
Cheers
smouker said:
Thank you for your work.
I was able to flash the kernel.
Cheers
Click to expand...
Click to collapse
Well, report back your experience please :highfive:
joe2k01 said:
Well, report back your experience please :highfive:
Click to expand...
Click to collapse
Fingerprint sensor is faster! Currtently im using I/O-Scheduler Zen an 1024 Readahead.
I underclocked both CPU groups and so far the Phone is still stable
Thank you for your work!
New build released:
Bioshock governor
Tripndroid scheduler
Nvidia power patches
Fixing credits in repo, will fix OP later
Support for both Stock and Custom or just Custom??
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
Both.
FixerZ said:
Support for both Stock and Custom or just Custom??
Click to expand...
Click to collapse
On stock you'll have bugs like no SD card and buggy camera
can you make dt2w in this kernel?
Ruppi64 said:
can you make dt2w in this kernel?
Click to expand...
Click to collapse
It is already in kernel, I just need a proper way to activate it
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
That would be good, then synonymous times the lockscreen a sense:good:
Ruppi64 said:
That would be good, then synonymous times the lockscreen a sense:good:
Click to expand...
Click to collapse
Yeah but I have to investigate a bit
Hi, I just made a tg group for my kernels users. Here is link http://t.me/WhitePugKernels
joe2k01 said:
It is already in kernel, I just need a proper way to activate it
Click to expand...
Click to collapse
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Ruppi64 said:
I have tried dt2w times after this guidance https://forum.xda-developers.com/mate-9/how-to/enable-double-tap-to-wake-mate-9-t3580764
But unfortunately I have only the option under motion control dt2w and dt2s with firmware DUK-L09C432B130
Otherwise no function
Click to expand...
Click to collapse
That guide is for EMUI only. Anyway I may be wrong
AOSP-CAF 8.1 for Xiaomi A1
Code:
/*
* Your warranty is now maybe void.
*
* We are not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
What's AOSP?
AOSP is Android as Google publish without other modifications. More or less AOSP is the Nexus devices stock rom without gapps.
We added few non-AOSP features for a better user experience and we NOT going to add something other.
What's CodeAurora Forums?
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
Bugs
* WiFi hotspot (need to reboot after using it or wifi breaks)
FAQ
Why is the security patch older then the latest AOSP patch?
CAF focus on delivering the latest hardware patches and are usually about a month behind Google on security patches, on the other hand, Google is usually a month or more behind on them on caf patches (sometimes months). No point in complaining about it, if you want the latest security patch, go with an AOSP based rom (like PixelExperience), if you want latest qualcomm optimizations for our hardware as well as fixes, go with caf, its as simple as that.
I'm having an issue with X third party app/module/hack
Talk to the dev of that thing, not me. if the dev has a solution I need to implement that won't effect others, have him contact me
Can you add X feature like traffic meter?
No! this is pure aosp-caf. Only support for exfat and advanced power + button support was added, no stupid non stock UI tricks
Installation
Same as all other roms here:
1. Wipe data if coming from another custom rom
2. Install ROM
3. Flash TWRP
4. reboot into twrp
5. Flash GAPPS
6. Flash magisk
7. reboot
Download
Link
Sources
https://github.com/AOSP-CAF
https://github.com/PixelExperience-Devices/android_kernel_xiaomi_msm8953
Credits:
Men_in_black007 for the rom
Team oreo for the dt
Flex1911 for the kernel base
XDA:DevDB Information
[ROM][8.1][AOSP-CAF][LA.UM.6.6.r1-07400-89xx.0][17/04/18], ROM for the Xiaomi Mi A1
Contributors
sooti, Men_in_black007, flex1911
Source Code: https://github.com/AOSP-CAF
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
Based On: CAF
Version Information
Status: Stable
Created 2018-04-12
Last Updated 2018-04-17
Nice Dev!!
Changelog:
17/04/18:
* Partial fix for wifi hotspot - It works now but reboot is required after turning hotspot off to get wifi to work again, still trying to find a solution.
* Updated kernel base from flex to 3.18.105
* Fixed camera watermark in stock camera (for those who use it)
14/04/18:
* Fixed audio clicking bug
* Merged 'LA.UM.6.6.r1-07400-89xx.0'
13/04/18:
* Initial release
Reserved
link for download?
yay!!! was waiting for it :3 thanks!!!
Selinux permissive? Some banking apps don't run if it's set as permissive. It'd be really helpful if it's enforcing
pluticoman said:
link for download?
Click to expand...
Click to collapse
Will be up when its done uploading
anoubhavcashyap said:
Selinux permissive? Some banking apps don't run if it's set as permissive. It'd be really helpful if it's enforcing
Click to expand...
Click to collapse
Non of the roms have selinux enforced yet, we are working on addressing the denials but for now just use magisk hide no? I think its should work, at least it works for me... otherwise can't help until we get selinux working right
Thanks @sooti.
A long awaited ROM. Thanks a lot.
That's what called master piece. Great work .... Thank you for pure core Android
sooti said:
Will be up when its done uploading
Non of the roms have selinux enforced yet, we are working on addressing the denials but for now just use magisk hide no? I think its should work, at least it works for me... otherwise can't help until we get selinux working right
Click to expand...
Click to collapse
Yeah, man but unfortunately there's some apps that are still detecting root even after using magisk hide.
Build is up.
Possible bug - voLTE, there is no icon so don't complain about that. Please check if voLTE actually works, not if icon is there. thanks
Already installed all good sooti thanks!!!
In this rom the navbar is working??
ruperxl89 said:
In this rom the navbar is working??
Click to expand...
Click to collapse
Yup
Small update will be uploaded tomorrow that fixes audio issues (click sound)
sooti said:
Yup
Small update will be uploaded tomorrow that fixes audio issues (click sound)
Click to expand...
Click to collapse
and where you can configure to override the buttons and activate the navbar
ruperxl89 said:
and where you can configure to override the buttons and activate the navbar
Click to expand...
Click to collapse
Under buttons :/ just enable navbar
sooti said:
Yup
Small update will be uploaded tomorrow that fixes audio issues (click sound)
Click to expand...
Click to collapse
hey. noob question.
In order to install the update I need to do the same process I did in the installation? Or will it be via OTA?
leofwg said:
hey. noob question.
In order to install the update I need to do the same process I did in the installation? Or will it be via OTA?
Click to expand...
Click to collapse
Same process as install
Official?
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.*/
RZ Kernel aims for as stock experience as possible. It is made from Samsung's stock kernel with stability updates thanks to great guys who made ELS (exynos-linux-stable) branch
It also attempts to increase overall multitasking performance while maintaining good battery life with proper settings
Features
Adapted new Samsung EMS scheduler from Samsung 4.14 kernel (with 16ms PELT)
Gaming optimizations (reduce heat while maintaining performance stability)
Disabled battery-hogging WAKELOCKS
WireGuard and DriveDroid support
Security patch fixes adapted
Thanks to corsicanu for helping me with initial kernel support
XDA:DevDB Information
RZ Kernel, Kernel for the Samsung Galaxy S9
Contributors
remilia15
Source Code: https://github.com/diepquynh/android_kernel_samsung_universal9810
Kernel Special Features:
Version Information
Status: Testing
Created 2020-04-11
Last Updated 2020-08-27
Download link: Drive folder
CHANGELOG:
20200412: Initial release
20200823 [FINAL]: Post #10
Notices and Q&A
The kernel is based on tw10-android-4.9-q branch of ELS, which is currently at stable state from my experience
Other related features of the kernel were picked from other sources. Credits belong to the owner
The kernel's energy costs table is remade in favor of new EMS scheduler
Questions and Answers (Q&A)
Q: AnTuTu scores please?
A: This kernel isn't made for benchmarks so let's not talk about it
Q: My phone gets hot while using this kernel?
A: Short answer: It's your own issue, fix it yourself. Nobody makes a kernel just to burn your hands
Long answer:
Install Termux app from Play Store
Enable screen rotation, open Termux in landspace mode
Type this command: su -c top -d 2
A list of processes will appear and refresh with 2s interval. Find which process consumes the most CPU usage with [%CPU] column and the package name in ARGS column. You should see the culprit of your issue
Reminder: There is no such thing as "I have nothing in background but the phone still heats up". There definitely something happen and 99% of the time it's some of the rogue apps running in background
Q: Can you add X Y Z feature to this kernel?
A: I want to keep the kernel clean and simple. However, if the feature is really useful, I'll consider adapting it with proper performance check before releasing
Q: Installation procedure?
A: Simply flash the kernel with supported ROM and forget. No Magisk reinstallation needed
Reversed for future usage
Another kernel for S9 devices, awesome.?
Thanks
Updated initial release with latest defconfig base for DTC5 vendor
Limit of downloadings from google...
Hey. Will this kernel Work with dtc4 vendor?
Build kernel from scratch
I need help with building kernel outside of android build system.
I have downloaded sources from here: https://github.com/LineageOS/android..._universal9810 , installed cross-compiler, configured with "make exynos9810-starlte_defconfig", build with "make". For now I have file arch/arm64/boot/Image .
How to build correct dtb and pack it with the Image file to bootable image?
Thank you.
Second public build is coming, and this will be the final build of the kernel project!
We have been going through lots of ups and downs in the testing group, so here are the results
Changes:
Fixes zram on boot
Adapted a new kernel scheduler, supporting 32/64-bit task scheduling
Critical scheduler performance fixes
Adapted newer vendor support
As this is the final build of the whole kernel project, I'd like to say thank you to all supporters/developers who helped me improving the kernel. The whole project hasn't lasted long, but it was a great time. This and the RZ Kernel project for Exynos 8895 will also be abandoned, unfortunately
Once again, thank you for all your support!
remilia15 said:
Second public build is coming, and this will be the final build of the kernel project!
We have been going through lots of ups and downs in the testing group, so here are the results
Changes:
Fixes zram on boot
Adapted a new kernel scheduler, supporting 32/64-bit task scheduling
Critical scheduler performance fixes
Adapted newer vendor support
As this is the final build of the whole kernel project, I'd like to say thank you to all supporters/developers who helped me improving the kernel. The whole project hasn't lasted long, but it was a great time. This and the RZ Kernel project for Exynos 8895 will also be abandoned, unfortunately
Once again, thank you for all your support!
Click to expand...
Click to collapse
Arigathanks! I've been using the kernel for quite sometime and I like how it's underclocked by default. What device would you be moving to?
Sad to see such a nice kernel getting abandoned.
What needs to be done to keep it updated and relevant? Would love to keep it alive.
Using this kernel with havoc os, all is good as a daily driver battery life with this combo is awesome
Revontheus said:
Arigathanks! I've been using the kernel for quite sometime and I like how it's underclocked by default. What device would you be moving to?
Click to expand...
Click to collapse
I'm still using my daily driver (S8+) and currently don't have plans buying any other devices
BackToAndroid said:
Sad to see such a nice kernel getting abandoned.
What needs to be done to keep it updated and relevant? Would love to keep it alive.
Click to expand...
Click to collapse
Perhaps you can clone my kernel repo and do something with it. The most contemplating thing is to handle future vendor updates from Samsung. The kernel might go unbootable on latest One UI at some point, so someone must be doing the stock defconfig update (that's the least requirement to boot One UI ROMs with newer vendor)
Hmmm....Usually I can verify that the kernel has been installed by checking it's build date. But it still shows the same like before. I'm running official LOS and flashed the kernel in LOS recovery. According to the log it went fine. Maybe it doesn't work with that recovery?
Edit: Ok, in TWRP it works fine.
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
It works without issues for the most part except for USB C audio output which stutters compared to stock kernel.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
I tried it. Some tweaks not working like showing download speed and reverted back the old power menu (no emergency call) which is baked in the rom and the settings menu changes like 2 battery options in the menu. One is fixed at maximum power saving and cant change while another is on the device health or something which can be change. I also found that sometimes it ramps up the clocks without any reason i still manage to get 4.5-5.3hrs of sot with light usage. The chrome is unusable since it bugged out like its inverted color and cant see sh*t.
BackToAndroid said:
Anyone tried using with the latest vendor / security patch? I'm on Alexis ROM 1.8 would love to continue using this kenel.
Click to expand...
Click to collapse
Just flashed it - seems to work fine with 1.8
UweRammelt said:
Just flashed it - seems to work fine with 1.8
Click to expand...
Click to collapse
How was the standby drain? What twrp did you use? I used 3.4.0.0 of TWRP. The chrome is super dark and cant see. Can you confirm this or im an isolated case? Do you think its because of not using twrp 3.3.1.1 that bugged mine? Hope you can help me. Thanks!