How can i force my car : Hyundai Sonata to use AUX audio output instead of USB that comes when using Android auto, because with using usb i get 1-2 seconds sound delay while on aux it works normally, is there anyway to disable the android auto from getting audio from usb and just get audio from aux?
when i play my media through AUX there is no delay or lag, but when i use Android auto it uses remote_submix to get audio from usb and therfore i cant use my aux audio, i tried to disable remove_submix but android auto wont start, any idea how to reroute audio from android auto usb to aux?
Related
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I think the answer lies in the question here,, Parrot Bluetooth Media Connection.
The stereo isn't 'smart' enough to determine that what is connecting to it is a Phone/MP3 and as such you wont be able to split the audio to have the phone play music and the Stereo take calls, it'll end up being one over the other.
One way around this would be to test with a completely different Bluetooth Headset to see if this allows music to be played on the Device and Calls to come through on the Headset,, failing that its going to have to be a potential dev jobby to split how the device sends its audio and to what specific device,,, if that lies with HTC and Android/Us or Pioneer/Parrot themselves,, might be worth asking whats the official standpoint on this with the Manufacturer and see if they are getting this same issue from multiple folks
uConnect and Bluetooth Media
deadman3000 said:
I have a Pioneer car stereo with built in Parrot bluetooth and media connection. I had this issue with my previous phone so it must be either an Android issue or problem with my car stereo bluetooth. Every time I connect bluetooth to the car stereo the phone enables media connectivity and I have to manually go in and turn it off again. Sometimes I have to turn it on and off again as it says it's connected even though it isn't (tick box is ticked but if I untick it it connects and I have to untick it again and OK it to verify). Also if I disconnect it then cycle through the sources on the car stereo as soon as I get to bluetooth it enables it again.
I don't want it on because I want to hear media audio through the phone speakers and phone calls through the car stereo.
Android 4.1.2 at present.
Click to expand...
Click to collapse
I have the same problem with my HTC One across four different ROMs, two GE and two Sense.
It's NOT an issue with my car stereo (uConnect system) as it works flawlessly on my Nexus 7 and VZW Galaxy Nexus. I prefer to have media (music, Ingress etc...) play over the phone. Only thing I want to play over the uConnect is the actual phone. No matter how many times I unselect media in the bluetooth settings it selects it again.
I see this is an old thread, anyone have any ideas?
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
deadman3000 said:
Nope. It does not always do it though. I found that if I leave bluetooth on it seems to be OK just as long as I don't switch through from aux to radio to CD and back to USB again on the Pioneer. If I use the automatic bluetooth app to save battery it connects but then connects with the media option enabled. Bummer.
Click to expand...
Click to collapse
I've just installed Bluetooth Auto Connect have to go run some errands in a little while, I'll let you know if it helps out managing profiles or not.
If it works let me know what settings you used as I don't understand all the options lol.
bluetooth problem
Hi developers: Thanks Team Venom for a great ROM. I have only one problem. Rom 2.7 no problem with Bluetooth in the car. 3.1 Installation of clean and dirty disables bluetooth. Ten seconds connected and then disconnected. Again, connects and disconnects. So it all over again. It is in version 3.6 ... any change BT software? You can install the software separately BT? Or any other advice? Thank you very much
edit: I deleted the original settings in the car. Again the connection and still the same problem.
Hello all, I didn't see any recent posts regarding setting Android Auto to use aux audio output instead of USB. I have an LG V30 and the Quad DAC sound quality is significantly better over aux than USB in my Ascent's Harmon Kardon speakers. It is very inconvenient to have to unplug my phone and manually select aux in the media center settings just to play good quality music. Please help! [emoji24]
Sent from my LG-H932 using Tapatalk
I feel ya. I have the V35, but it doesn't matter what phone. What you have to do is before plugging in your phone USB to launch AA, you must select your audio source first. And then, do not select anything else like Play Music or any other app that plays music because you can't get back to it without unplugging and plugging back in. The good thing is that you can still change tracks via steering wheel controls. I don't see Google baking in functionality for AUX ports anytime soon if ever since they want it all to go through USB and AA.
Did you try to use the option in developer settings in phone system menus to disable audio through USB routing?
This is my setup:
Aftermarket head unit (IDCORE) connected through AUX to car stereo. AA is connected wireless (S10+, stock) with head unit; there is also car BT connected to mobile; when driving TWO active BT connections: 1, phone - car BT for audio and 2, IDCORE for AA).
And this is my problem:
AUX output (head unit -> car stereo) works, but has a quite annoying (static?) noise. Ground loop isolator is set, everything I can do hardware-wise is done -but the quality of AUX sound is MUCH LESS than it is when using BT phone-car connection (makes sense, Meridian built in system, with fiber optic).
Question:
considering above and that there IS an active phone-car BT audio connection during driving (beside the necessary AA-IDCORE connection) is there a way (software, app, switch?) to route AA sound through the phone-car BT audio connection, instead of the (noisy!) AUX wire?
Rooting of the phone is not an attractive option (due to my company account on the phone) - but I would be interested in any solution; as noise on the AUX output is quite disturbing. Thanks in advance
Have you checked the Bluetooth settings and checked music audio for the connection to the head unit?
Just did it. I CAN route music audio (in my case TuneIn) to BT in the settings of the phone (sounds, separate app sounds setting), but 1, this does not work (no sound over car BT from TuneIn, when using it on AA), 2, this setting can only be set for ONE application at the time (and I also use navigation, news service on AA), 3, the Android Auto app (the one I need?) does not show up in the application list of this setting. Still stuck.
My idea was (but I don't know if it is possible) a nifty app, that FORCES all sound (music, nav, news, etc) from the phone to BT (car), even when using AA.
I've got the same problem, using AA over USB and can't get Viper working because it doesn't stream over Bluetooth.
I have the same request. I have an AA unit attached to an original BMW X5 nav system. I can switch between them by long pressing the MENU button. The problem is that the AA unit can output sound only via audio jack and my car's system has fiber optics. The quality is very poor when compared. Is there anyway in which I can force my Android phone to output AA sound through car's BT? The AA unit has an option to do this for phone calls but unfortunatly not for regular sound (Spotify etc).
Anyone heard of anything related to this? I noticed that in the iPhones there is a setting in the accessibility options to route the audio through bluetooth. But there is nothing similar in AA. I can't believe this feature is not requested more.
Has anyone solved it? I'm struggling with the same thing.
I just ended up buying a BT transmitter which connects to my device's jack audio out and in turn it connects to the car's bt. It is stupid that there is no software solution to such a simple problem. Why can it do it for audio calls but not for music!? Why the iPhone can do it but the all configurable God of a mobile OSes simply can't?
Also, another idiotic thing of AA is that it doesn't allow you to switch the call to speaker or another bt device... in fact nothing happens when I get a call on the actual phone when connected to stupid AA. This is sooooo idiotic. Way to go android...
Aawireless also has a fewture that solves this also
Really? Where? What is it's name? Where do I access this?!
Aawireless: that is a piece of hardware again, isn't it (https://www.aawireless.io/)?
I look for an app/ software to solve this issue, if possible..
Aaahh I thought the reference was to Android Auto Wireless not a 3rd party hardware thing.
I have a 2014 Acura MDX with no Android Auto Support. I purchased a Navtool kit which allowed me to add Carplay/Android Auto to it. With Carplay, I can configure the phone to play the music through Bluetooth because the Navtool interface plays through Aux and it passes engine electrical noise. When I use my Pixel 6 Pro, even when the phone says it is connected to Bluetooth, the sound is still forced through the Aux output of the Navtool's device.
Is there a way to configure Android Auto to play through Bluetooth?
Thanks,
Nelson
These are not Android Auto.
So, I am currently bypassing my car's infotainment and amp to run a high end audio system. Reason for this is the stock CMU and Factory Amp just don't cut it for power, bit-rate, and sampling compared to a quality aftermarket system. I'm currently running an OTG that goes to a Digital to digital converter converting to optical audio straight to my DSP.
I'd LOVE to have Android Auto working while being able to send audio directly to my own system rather than the car's. But Android Auto entirely overrides audio outputs from the phone and forces audio to be done through the connection even if wireless. (so that I'm not using the stock amp which is integrated into the car's MOSTbus and a royal pain to work with, and double amp set ups are horrible for quality and tuning audio)
Has anyone figured out how to change the audio output of the phone/android auto to be separate of the Android Auto service while retaining the Car's connected Android Auto features/controls but using the separated audio stream?
Hi. Same problem