deleted no more support
I cant wait to flash it.
@carbon271 Thank you so much for this! Any plans to make it TWRP flashable?
avbctdisable link seems broken...
LDP12 said:
avbctdisable link seems broken...
Click to expand...
Click to collapse
FIXED
TheKnux said:
@carbon271 Thank you so much for this! Any plans to make it TWRP flashable?
Click to expand...
Click to collapse
I didn't make the GSI was pulled from the treble side of development is an alternative until RR is supported for our devices
The rr gsi flashes fine in twrp, Fyi. Does this one have volte working? It works till u make a call then 3g or h.I flashed the build which seems to be the same from source forge from the gsi thread and volte doesnt work. Tmobile. General gsi info... U dont have to flash any of the other stuff. Whatever rom u run, wipe system, data, dalvik in twrp, flash gsi system.img, reboot.i have flashed it several times since its release this past fri/sat..
Flashing that first zip, what is it for?
Why flash to both slots? The whole point of A/B slotting is for redundancy fallback in case there's an issue with an update/rom. Also, TWRP supports flashing .img files without having to deal with fastboot (i.e., Install->Install Image).
fullofhell said:
The rr gsi flashes fine in twrp, Fyi. Does this one have volte working? It works till u make a call then 3g or h.I flashed the build which seems to be the same from source forge from the gsi thread and volte doesnt work. Tmobile. General gsi info... U dont have to flash any of the other stuff. Whatever rom u run, wipe system, data, dalvik in twrp, flash gsi system.img, reboot.i have flashed it several times since its release this past fri/sat..
Flashing that first zip, what is it for?
Click to expand...
Click to collapse
The Zip is to Disable Encryption since it cant be done thru fastboot is crucial to use it if not u will only have 8gb storage available meaning that u won't have any storage available.
Now First, off the one your talking about is an old build they reposted a whole new build yesterday second the GSI does not properly flash thru TWRP I cannot stress explaining this enough I have been testing GSI for 3-4days now and all I've done is write down and testing what works and doesn't is why I wrote the GSI Flashing guide Been Testing RR since this Morning and everything in my side works Volte, Wifi, Bluetooth,SMS all works camera also works if u don't follow the instructions I can't be of much help is Crucial to follow the steps as mentioned for the reason of everything to work properly.
Nsane457 said:
Why flash to both slots? The whole point of A/B slotting is for redundancy fallback in case there's an issue with an update/rom. Also, TWRP supports flashing .img files without having to deal with fastboot (i.e., Install->Install Image).
Click to expand...
Click to collapse
Is how I got everything to work properly if you guys want to try it as just slot a or b go for it but do know if you have issues I can't be of much help and twrp wasn't flashing gsi properly is why I used fastboot trust me I wouldn't go thru the hassle of saying it didn't work if it did
Will flash this tonight. I've been waiting for this rom, by far my favorite rom!
Yes!!!!! I was hoping we got this
Getting error 404 on downloads
Sent from my OnePlus6T using XDA Labs
fullofhell said:
The rr gsi flashes fine in twrp, Fyi. Does this one have volte working? It works till u make a call then 3g or h.I flashed the build which seems to be the same from source forge from the gsi thread and volte doesnt work. Tmobile. General gsi info... U dont have to flash any of the other stuff. Whatever rom u run, wipe system, data, dalvik in twrp, flash gsi system.img, reboot.i have flashed it several times since its release this past fri/sat..
Flashing that first zip, what is it for?
Click to expand...
Click to collapse
Do you ever stop giving bad flash instructions? This is the second time I've seen you do this now. Do you just want people to brick their devices or are you really that dumb? Don't even make a post if you're just going to guide people to a brick.
carbon271 said:
The Zip is to Disable Encryption since it cant be done thru fastboot is crucial to use it if not u will only have 8gb storage available meaning that u won't have any storage available.
Now First, off the one your talking about is an old build they reposted a whole new build yesterday second the GSI does not properly flash thru TWRP I cannot stress explaining this enough I have been testing GSI for 3-4days now and all I've done is write down and testing what works and doesn't is why I wrote the GSI Flashing guide Been Testing RR since this Morning and everything in my side works Volte, Wifi, Bluetooth,SMS all works camera also works if u don't follow the instructions I can't be of much help is Crucial to follow the steps as mentioned for the reason of everything to work properly.
Click to expand...
Click to collapse
Yeah i flashed the same build last night via twrp and used twrp to resize system partition to install gapps.f Lte works till u make a phone call. Tried with three kernels, redflare,.nebula, and stock kernel.thanks for linking this. I am building RR pie for fajita. Been working at it for a few days. My build derps at 90%, I now have some help and it will be ready to share soon, till then this gsi runs great, so long as u dont make a phone call.
Also, gsi's must be flashed to both slots on all devices
fullofhell said:
Yeah i flashed the same build last night via twrp and used twrp to resize system partition to install gapps.f Lte works till u make a phone call. Tried with three kernels, redflare,.nebula, and stock kernel.thanks for linking this. I am building RR pie for fajita. Been working at it for a few days. My build derps at 90%, I now have some help and it will be ready to share soon, till then this gsi runs great, so long as u dont make a phone call.
Also, gsi's must be flashed to both slots on all devices
Click to expand...
Click to collapse
So are you saying that you can't make phone calls?
sparky2029 said:
So are you saying that you can't make phone calls?
Click to expand...
Click to collapse
DO NOT LISTEN TO HIM FALSE INFORMATION
I've gone thru the hassle to write this guide for people that are likeminded and can't wait for an official build and wanted to see what is all about so i took the leap of testing GSI i have done everything I could to make sure that nobody has issues i am personally running this GSI and do not have any problems what so ever LTE works Volte Works wifi Bluetooth everything I am also running holy dragon kernel with magisk no issue no force closes everything seems pretty stable trust me I've sat here day after day working on this I wrote this instruction as specific as possible for the reasons to prevent any bricks from anyone please people if the instructions are nothing of what I posted do not follow can't stress this enough messing with GSI on a and b devices is a pain is why I said I had to wipe and boot my OEM Tmobile Rom before I did everything again just looking out for people don't want anybody to do my mistakes.
DoktorPlazarus said:
Getting error 404 on downloads
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
Links Updated
carbon271 said:
Updating Links Now
Click to expand...
Click to collapse
Awesome ! Thanks a ton
Sent from my OnePlus6T using XDA Labs
DoktorPlazarus said:
Awesome ! Thanks a ton
Sent from my OnePlus6T using XDA Labs
Click to expand...
Click to collapse
Links Updated good to go
Related
As its widely known the official installation zips for the 4.0.0 community release of OxygenOS break boot loader compatibility with all other ROMs and all but one TWRP image.
I messed a bit around with firmware/kernel/system combinations to bring you the one and only which allows for running the 3.5.3 with a boot loader which is compatible with TWRP and other ROMs.
Required firmware revision 3.2.6, download: https://www.androidfilehost.com/?fid=385035244224381129 this zip contains only firmware no boot.img or system partition. Other firmware only packets can be found here: http://forum.xda-developers.com/oneplus-3/development/firmware-updates-oos-3-1-2-3-5-2-t3465312
OxygenOS 4.0.0 without firmware files: https://www.androidfilehost.com/?fid=457095661767120365
OxygenOS 3.5.3 without firmware files: https://www.androidfilehost.com/?fid=385035244224381127
OxygenOS 3.5.2 without firmware files: https://www.androidfilehost.com/?fid=312968872162493315
I know I could just put booth in one zip but I thought to keep it separated would be better in the long run.
So installation Guid
1. boot into TWRP
2. install the firmware zip
3. install the OOS 4.0.0 zip
4. wipe cache
5. reboot system and go back into recovery (this step prevents recovery from being overwrite by the stock one )
6. install SuperSU if you want or if you not than don't
7. reboot to system
done
Now keep in mind that 3.2.6 firmware while works well with old kernels has a updated fingerprint scanner firmware and will render the fingerprint scanner inoperative for older OOS releases and current custom roms. To fix that just flash 3.2.4 firmware packet together with the custom rom or your restored backup (https://www.androidfilehost.com/?fid=385035244224381128).
Thanks for the scripts, will give it a shot
Step 3 you mean 3.5.2 zip? And step 1 twrp you mean official? I'm currently with the modified twrp.
Gesendet von meinem ONEPLUS A3003 mit Tapatalk
Have I lost the base-band, as I retrieve it?
>Step 3 you mean 3.5.2 zip?
yes, it was a typo now fixed
> And step 1 twrp you mean official
yes, although in think the modified should continue to work
> Have I lost the base-band, as I retrieve it?
what do you mean? the modem firmware will be also changed to the firmware version you flash
3.5.2 modem
I live in a rural area in Missouri state that I often get poor signal, sometimes one bar on edge. The modem on 3.5.2 gave me the bestsignal and was rock solid steady, sigh, lol. Will you perhaps be releasing a flashable zip for it? If possible??
Thanks for your work and efforts!
If you use CM/RR you cannot use this radio as it will break your home button function.
whitebuffalo said:
I live in a rural area in Missouri state that I often get poor signal, sometimes one bar on edge. The modem on 3.5.2 gave me the bestsignal and was rock solid steady, sigh, lol. Will you perhaps be releasing a flashable zip for it? If possible??
Thanks for your work and efforts!
Click to expand...
Click to collapse
3.5.2 modem
NZnewbie said:
If you use CM/RR you cannot use this radio as it will break your home button function.
Click to expand...
Click to collapse
Yeah, I know. The baseband is different from the others and works better for me. But I prefer custom rooms, lol.
Same. I found this all out before the weekend...
whitebuffalo said:
Yeah, I know. The baseband is different from the others and works better for me. But I prefer custom rooms, lol.
Click to expand...
Click to collapse
Here is a link with only the baseband file taken from 3.5.2.
http://forum.xda-developers.com/showpost.php?p=68782646&postcount=336
I am using it currently on 3.2.6 without issues.
3.5.2 modem
AcmE85 said:
Here is a link with only the baseband file taken from 3.5.2.
http://forum.xda-developers.com/showpost.php?p=68782646&postcount=336
I am using it currently on 3.2.6 without issues.
Click to expand...
Click to collapse
Is this flashable in tarp? Or flashier? And thank you much. Going outside in the rain or snow isn't my idea of fun lol. I bought this hoping it would work better for reception since I'm in the boonies and even the fastest cable is 5mps where you can get it and when it's working lol.
Cheers,
Denny
whitebuffalo said:
Is this flashable in tarp? Or flashier? And thank you much. Going outside in the rain or snow isn't my idea of fun lol. I bought this hoping it would work better for reception since I'm in the boonies and even the fastest cable is 5mps where you can get it and when it's working lol.
Cheers,
Denny
Click to expand...
Click to collapse
Yes it is flashable in TWRP. In case you run into issues, simply reflash the 3.2.6 firmware linked in the first post.
3.5.2 modem
AcmE85 said:
Yes it is flashable in TWRP. In case you run into issues, simply reflash the 3.2.6 firmware linked in the first post.
Click to expand...
Click to collapse
I'll try it, I'm not using the 3.2.6 firmware because the home button doesn't work for me. Hopefully it will work and that kind you for your time and effort!
Cheers,
Denny
this is working very very well with 3.5.2 modem and 3.2.6 firmware thank you!
Maybe stupid question, but in the step 5 - should we let it boot into the system to the optimizing apps window or do we reboot straight into twrp again? Thanks
Berik84 said:
Maybe stupid question, but in the step 5 - should we let it boot into the system to the optimizing apps window or do we reboot straight into twrp again? Thanks
Click to expand...
Click to collapse
Reboot straight back to twrp
Sent from my OnePlus 3 using XDA Labs
your steps worked perfectly and now i am running 3.5.2. CB. thanks a lot for your guide. Now that 3.5.3 is out, can i just update via OTA or do you recommend something else. any help will be really appreciated
updated to 3.5.3 community build
DavidXanatos said:
updated to 3.5.3 community build
Click to expand...
Click to collapse
Can't we just flash 3.5.3 over modded twrp like i did in 3.5.2?
thanks for your sharing sir.. keep going
Most custom ROMs for the OnePlus 5 are now supporting encrypted devices only. However, some users choose to keep their device in a decrypted state for MultiROM support and for other reasons. If you follow the steps below, you can flash any encrypted ROM on your decrypted device (without losing data) and your device will remain decrypted! I found this information in one of the many threads I've read (I don't remember which one) and thought I'd post it here to help others and for easy reference. Enjoy!
Follow These Steps:
1. Boot into TWRP
2. Wipe caches, data, and system partitions
3. Flash encrypted ROM
4. Flash GApps
5. Flash Magisk
6. Flash no-verity-op5.zip (not created by me)
7. Reboot
8. Enjoy!
If you closely follow the instructions above, you can enjoy any ROM on your decrypted OnePlus 5 and have the best of both worlds! :highfive:
Note 1: If device gets stuck at OnePlus boot animation after following all of the steps above, hold the power button for 10 seconds to turn off device. Power the device back on and it will boot successfully into the ROM.
Note 2: Some ROMs are not compatible with MultiROM without the inclusion of additional commits by ROM developer.
After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Tested it yesterday with aosip and all data are on internal storage. Flashed validus today without no-verity-op5.zip and it worked too. Didn't lose data on internal storage...
Gesendet von meinem ONEPLUS A5000 mit Tapatalk
Ph0enix_216 said:
Is this confirmed working? Has anyone actually tried the process and confirmed that any data on the phone's internal storage is there?
Click to expand...
Click to collapse
Yes, I have followed these steps to flash MANY encrypted ROMs on my decrypted device.
Confirmed to work successfully! :good:
Creeper36 said:
After wipes, its Flash ROM.. Flash optional Kernel.. Flash Gapps.. Flash No-verity.. Flash optional root (magisk or SuperSU).. Flash optional Viper4Arise?
Click to expand...
Click to collapse
I've found that flashing SuperSU (instead of Magisk) on encrypted ROMs often ends in a bootloop on my decrypted device. Flashing Magisk seems to be a requirement.
Not working for me. Tried with AICP release from 9/11. Wiped caches, system, data. Flashed rom. flashed gapps (tried stock/full/micro). Flashed magisk (also tried without). -> Bootloop
//edit
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?
nico2195x said:
sorry i think i misunderstood the post. i thought i can flash decrypted roms on encrypted device xD is that possible too?
Click to expand...
Click to collapse
No, I believe your device must be decrypted to flash decrypted ROMs.
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.
DunamisMaximus said:
Thanks for this! Do you know who we should thank for the zip? If there's an original thread for it?
Click to expand...
Click to collapse
sjamie said:
You are very welcome! Unfortunately, I do not know who originally created the verity zip. It has been passed around on XDA by many people.
Click to expand...
Click to collapse
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.
I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Sent from my Nexus 6 using XDA Premium HD app
shadowstep said:
The original zip was modified for making FBE optional by @snowwolf725. Click here to visit his original thread.
Click to expand...
Click to collapse
And there's a thread I started for using FDE.
It works with most ROMs...
https://forum.xda-developers.com/oneplus-5/development/op5-disk-encryption-enabler-op5-t3672477
glockman4519 said:
I have a quick question. I just unlocked the Bootloader on my Plus 5 and installed TWRP 3.1.1-1 and Magisk 14.0 on it. The firmware is 4.5.0 as I didn't let it update at all and did all this to the device upon first bootup. I did not decrypt.
I've tried installing latest RR release (final for N cheeseburger) and the install stops with errors. I tried a different rom in the same Android version (7.1.2) and get same results. MD5 checks out on both downloads.
Do I have to flash the latest OnePlus 5 update (full OTA 4.5.10) before flashing a 7.1.2 rom? And should I decrypt my device for easier flashing?
If no one answers, I completely understand and will search some more but this seems to be a cloudy subject that gets many different answers and I thought I would post it here. Thank you all in advance.
Click to expand...
Click to collapse
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..
arjunarora said:
Yes.. U need to flash the latest firmware and then flash roms.. There's a thread for firmware.. Flash the whole zip would again give you stock recovery and you have to re do the fastboot stuff so makes no sense..
Click to expand...
Click to collapse
In addition to what is stated here, if you flash Magisk immediately after flashing the full firmware zip (no rebooting between steps), TWRP won't get replaced with the stock recovery. This is a great time saver!
Any method to get oxygen os as a secondary ROM with multirom?
dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Yes, I've read that is possible. No, I don't know how to do it. :laugh:
sjamie said:
Yes, I've read that is possible. No, I don't know how to do it. :laugh:
Click to expand...
Click to collapse
Darn, well thanks for the reply
I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"
dakotah2468 said:
Any method to get oxygen os as a secondary ROM with multirom?
Click to expand...
Click to collapse
Have you tried flashing OxygenOS, the no-verity zip and Magisk?
glockman4519 said:
I just wanted to thank you for this thread. All of the information you provided helped me immensely. I was struggling with this device and flashing roms at first but one I unencrypted it, with your guide, everything worked great. I was going to leave it encrypted for easier flashing since most all the roms for this device are encrypted only. But I was having more issues than ever. And many, of the posts in here have also answered quite a few questions I had. This should be a pinned tread.
Anyways thank you again. Your thread is a must read for anyone with an Opo5.
"Chance Favors the Prepared"
Click to expand...
Click to collapse
Thanks for the feedback and I'm glad this thread could provide you the guidance you needed.
Hi guys,
My 32 GB 3GB RAM Moto G5S Plus should arrive tomorrow, and I have a couple questions.
Apparently the bootloader can be easily unlocked and I'm guessing I'll be able to easily get root.
My questions are:
1 - How do I unlock the bootloader
2 - How do I get root
3- What's the best custom ROMS for this device
Thanks!
razers7t8 said:
Hi guys,
My 32 GB 3GB RAM Moto G5S Plus should arrive tomorrow, and I have a couple questions.
Apparently the bootloader can be easily unlocked and I'm guessing I'll be able to easily get root.
My questions are:
1 - How do I unlock the bootloader
2 - How do I get root
3- What's the best custom ROMS for this device
Thanks!
Click to expand...
Click to collapse
1 - read - more than enough info available
2 - c 1
3 - that's up to you to decide
razers7t8 said:
Hi guys,
My 32 GB 3GB RAM Moto G5S Plus should arrive tomorrow, and I have a couple questions.
Apparently the bootloader can be easily unlocked and I'm guessing I'll be able to easily get root.
My questions are:
1 - How do I unlock the bootloader
2 - How do I get root
3- What's the best custom ROMS for this device
Thanks!
Click to expand...
Click to collapse
Follow this link for bootloader unlock, root, & twrp(&thank the OP:good - it's pretty straight forward & won't take too long to accomplish...be sure to follow the instructions closely: https://forum.xda-developers.com/moto-g5s-plus/development/root-moto-g5s-plus-t3673287
And "best" is a subjective thing, but there are some good ROMs out there. Give them all a try I've been on validus 8.0 for weeks now, aex 64 bit is nice, and there are more ROMs floating around on android file host too.
Good luck & hope you like your new g5s :highfive:
Mines coming tomorrow too!
Mine will be here Friday.
Sent from my SGP512 using XDA Premium HD app
I don't know how I'm gonna actually make use of it as a "phone" given that I'm currently using an iPhone 8 Plus, but I'm just happy to have a customizable Android device again. Google Voice for the win!
razers7t8 said:
I don't know how I'm gonna actually make use of it as a "phone" given that I'm currently using an iPhone 8 Plus, but I'm just happy to have a customizable Android device again. Google Voice for the win!
Click to expand...
Click to collapse
Just in time too...iPhone X sales are weak so its about that time for crapple to start throttling their 8's to try and get those X sales up!
startswithPendswithOOH said:
Just in time too...iPhone X sales are weak so its about that time for crapple to start throttling their 8's to try and get those X sales up!
Click to expand...
Click to collapse
Hahaha. Custom ROMS, baby!
startswithPendswithOOH said:
Follow this link for bootloader unlock, root, & twrp(&thank the OP:good - it's pretty straight forward & won't take too long to accomplish...be sure to follow the instructions closely: https://forum.xda-developers.com/moto-g5s-plus/development/root-moto-g5s-plus-t3673287
And "best" is a subjective thing, but there are some good ROMs out there. Give them all a try I've been on validus 8.0 for weeks now, aex 64 bit is nice, and there are more ROMs floating around on android file host too.
Good luck & hope you like your new g5s :highfive:
Click to expand...
Click to collapse
I unlocked the bootloader successfully, but when I get to the second step and try to flash the twrp recovery, I keep getting this message:
I keep getting "writing recovery"...
(bootloader) Image not signed or corrupt
OKAY [0.292s]
finished
I erased my phone and started over and didn't enable fingerprint or a PIN. What's the problem?
razers7t8 said:
I unlocked the bootloader successfully, but when I get to the second step and try to flash the twrp recovery, I keep getting this message:
I keep getting "writing recovery"...
(bootloader) Image not signed or corrupt
OKAY [0.292s]
finished
I erased my phone and started over and didn't enable fingerprint or a PIN. What's the problem?
Click to expand...
Click to collapse
Got everything to work. What's the best ROM, though. I'd prefer to be on 8.0 Oreo.
razers7t8 said:
Got everything to work. What's the best ROM, though. I'd prefer to be on 8.0 Oreo.
Click to expand...
Click to collapse
Validus has been my daily driver since day 1 of owning this phone, aex 64 bit is nice too. Just flash & see what you like best
Also, check android file host...there's a few builds there too.
startswithPendswithOOH said:
Validus has been my daily driver since day 1 of owning this phone, aex 64 bit is nice too. Just flash & see what you like best
Also, check android file host...there's a few builds there too.
Click to expand...
Click to collapse
OK. Thanks. I'm guessing Validos is Oreo 8.0. I'm gonna try it now. Could you provide a link?
razers7t8 said:
OK. Thanks. I'm guessing Validos is Oreo 8.0. I'm gonna try it now. Could you provide a link?
Click to expand...
Click to collapse
ROM: https://androidfilehost.com/?w=files&flid=231006
GZR minimal gapps: https://androidfilehost.com/?w=files&flid=222140 (You can use open gapps too if that's your preference)
GZR validus XDA thread: https://forum.xda-developers.com/mo...icial-8-x-y-ground-zero-roms-validus-t3690386
startswithPendswithOOH said:
ROM: https://androidfilehost.com/?w=files&flid=231006
GZR minimal gapps: https://androidfilehost.com/?w=files&flid=222140 (You can use open gapps too if that's your preference)
GZR validus XDA thread: https://forum.xda-developers.com/mo...icial-8-x-y-ground-zero-roms-validus-t3690386
Click to expand...
Click to collapse
I flashed everything, but when I reboot, it doesn't load an OS. It just reboots to TWRP. Help!
razers7t8 said:
I flashed everything, but when I reboot, it doesn't load an OS. It just reboots to TWRP. Help!
Click to expand...
Click to collapse
While I was still on the stock Moto ROM, the last thing I did was fo a factory reset because I had a PIN/Pattern. So I did a factory reset then it took me back TWRP when it restarted. I flashed the Validus ROM and it flashed successfully, but every time I reboot, it goes straight back to TWRP.
razers7t8 said:
I flashed everything, but when I reboot, it doesn't load an OS. It just reboots to TWRP. Help!
Click to expand...
Click to collapse
Hmm... Which TWRP version did you use? r15 is the latest one(r9 worked for me too)... https://androidfilehost.com/?fid=817906626617952763
Download it & flash it in recovery as an image file.
startswithPendswithOOH said:
Hmm... Which TWRP version did you use? r15 is the latest one(r9 worked for me too)... https://androidfilehost.com/?fid=817906626617952763
Download it & flash it in recovery as an image file.
Click to expand...
Click to collapse
Select partition to Flash Image:
system image
boot
recovery
logo
which one?
razers7t8 said:
Select partition to Flash Image:
system image
boot
recovery
logo
which one?
Click to expand...
Click to collapse
I checked. I initially flashed r15
razers7t8 said:
I checked. I initially flashed r15
Click to expand...
Click to collapse
I got out of the TRWP loop by flashing the stock moto ROM following this guide: https://forum.xda-developers.com/mo...lash-official-firmware-moto-g5s-plus-t3681018
Something is wrong with Validus. I would advise against using this custom ROM.
razers7t8 said:
I got out of the TRWP loop by flashing the stock moto ROM following this guide: https://forum.xda-developers.com/mo...lash-official-firmware-moto-g5s-plus-t3681018
Something is wrong with Validus. I would advise against using this custom ROM.
Click to expand...
Click to collapse
Uh, nope. Not a thing wrong with Validus. Been running the 12/8 build flawlessly since it came out. It's your 1st day with the phone and you messed something up along the way...not a ROM problem...user problem.
---------- Post added at 02:58 PM ---------- Previous post was at 02:53 PM ----------
razers7t8 said:
I checked. I initially flashed r15
Click to expand...
Click to collapse
Did you skip this step from the bootloader unlock thread after installing TWRP?
"Create a complete backup in this step. Do not do anything without taking backup
Now connect your phone to PC. You will see Moto Z storage. Move TWRP backup to PC from your phone. Also move music, images, video and everything to your PC.
Now go to wipe in TWRP and wipe data.
Now copy Magisk zip from PC to Phone.
Now go to install and select Magisk zip and flash. Now reboot to system."
Also, in the validus/GZR OP it has a zip file you need to flash if you had setup fingerprint on stock...did you try that?
"Note: If you set Fingerprint + Pattern/ Pin on Primary/Stock then you need to flash a Lock Fix file on Primary
Lockfix.zip"
Hello everyone,
is it possible to Flash a treble Rom with unlocked Bootloader?
Do i need twrp also?
If it is possible i will try to install all Apps from the global rom to the treble Rom.
Greets
florian-m19 said:
Hello everyone,
is it possible to Flash a treble Rom with unlocked Bootloader?
Do i need twrp also?
If it is possible i will try to install all Apps from the global rom to the treble Rom.
Greets
Click to expand...
Click to collapse
I think yes, but I'm not sure
Was wondering the same thing, does anyone know if the red magic 3 is A only or an A/B device. I'm pretty sure it's A only, but I couldn't find any documentation online.
Its A only i think.
Hum... So Project Treble should work ?
That is interesting !
If I could install Resurrection Remix to this device and provided everything works it would become really almost perfect.
If anyone wants to try... If not I'll do it myself when I have time (in 2 or 3 days)...
Regards.
If the device has treble support, meaning a vendor partition it should work no problem, a/b partitioning is really not required for treble.
I tested treble using fastboot, since twrp had some issues, but it resulted in a bootloop and a corrupted recovery partition. I managed to fix it by following: https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
Twrp gave me a mounting error for
/system_root, which is fixable by setting system to be read-only and then rebooting the recovery and re enableing read/write. Have not had the time to test using twrp and treble yet.
*I posted earlier in the day but managed to fix all the issues I had, so this a better summary :silly:
trepKep said:
I tested treble using fastboot, since twrp had some issues, but it resulted in a bootloop and a corrupted recovery partition. I managed to fix it by following: https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9
Twrp gave me a mounting error for
/system_root, which is fixable by setting system to be read-only and then rebooting the recovery and re enableing read/write. Have not had the time to test using twrp and treble yet.
*I posted earlier in the day but managed to fix all the issues I had, so this a better summary :silly:
Click to expand...
Click to collapse
So, this means its not working.. Sad Story.
florian-m19 said:
So, this means its not working.. Sad Story.
Click to expand...
Click to collapse
Well not necessarily, since I flashed the lineageos gsi through fastboot. (That may be the issue) I was having issues with twrp. I will try again today, although the chances are slim.
trepKep said:
Well not necessarily, since I flashed the lineageos gsi through fastboot. (That may be the issue) I was having issues with twrp. I will try again today, although the chances are slim.
Click to expand...
Click to collapse
U should clear user data and cache after installing new system if you have bootloop problem
Make sure its A only GSI
em902566 said:
U should clear user data and cache after installing new system if you have bootloop problem
Make sure its A only GSI
Click to expand...
Click to collapse
I'll keep that in mind
trepKep said:
I'll keep that in mind
Click to expand...
Click to collapse
Hey, did you try it again?
florian-m19 said:
Hey, did you try it again?
Click to expand...
Click to collapse
No, I was busy. But I'm trying right now
Treble Attempt #2
No luck, everything flashed with no errors, but all I get is more than 10 minutes of black screen. I also tried flashing magisk right after the gsi finished, same result.
trepKep said:
Treble Attempt #2
No luck, everything flashed with no errors, but all I get is more than 10 minutes of black screen. I also tried flashing magisk right after the gsi finished, same result.
Click to expand...
Click to collapse
Hmm then we must wait for a custom Rom..
florian-m19 said:
Hmm then we must wait for a custom Rom..
Click to expand...
Click to collapse
Yeah, a one plus 7 pro port would be nice
florian-m19 said:
Hello everyone,
is it possible to Flash a treble Rom with unlocked Bootloader?
Do i need twrp also?
If it is possible i will try to install all Apps from the global rom to the treble Rom.
Greets
Click to expand...
Click to collapse
Word of advice. Do not attempt to flash anything on this cell. You will regret it. I tried to flash TWRP over 6 weeks ago an it's been dead ever since. Even a cellphone repair center guy could not repair it.
You need to leave good enough alone.
People all around the world have been stuck in permanent recovery screens or fastboot screens like me.
It really is a very good cell the way it is ?
Bryceicle1971 said:
Word of advice. Do not attempt to flash anything on this cell. You will regret it. I tried to flash TWRP over 6 weeks ago an it's been dead ever since. Even a cellphone repair center guy could not repair it.
You need to leave good enough alone.
People all around the world have been stuck in permanent recovery screens or fastboot screens like me.
It really is a very good cell the way it is ?
Click to expand...
Click to collapse
Many people have faced the issue and they have recovered their device. Look for all solutions available.
danishajaz said:
Many people have faced the issue and they have recovered their device. Look for all solutions available.
Click to expand...
Click to collapse
I have. 7 weeks an counting an no working cell yet. I bought an Mi9 an no issues with it. Easy to reinstall firmware. The red magic 3 is the most difficult to repair cell I have ever encountered. I wish they had something like miflashpro for it
Treble is working from chinese ROM with twrp make sure image is A/B because this device is A/B
Guys, I decided to install custom firmware, but I met a bunch of problems.
I chose this recovery https://4pda.ru/pages/go/?u=https:/...4690/fsdownload/krdcaHlb9/TWRP_A30&e=94266802 and installed it through One, the recovery is loading, everything is fine. Then I decided to install Lineage OS 17.1 (https://w3bsit3-dns.com.ru/forum/index.php?showtopic=948701&view=findpost&p=90491345), BUT after a successful installation of the image it loads me into recovery again, and in the reboot section it says "no os installed ". At the moment, I can’t install any os - he writes that it is successful but eventually reboots into recovery. I will be glad to any help or advice.
dude same here , i tried flashing arrowOS and pixel EXperience but no OS installed shown ..i think its because TWRP doesn't support on android 10 cause on TWRP you can't change the option "mount system as read". this one is the first problem and there are so many else...
i tried many options, flashing new TWRP as well but RIP.
Yeah, i found it out too. Ive flashed stock through odin and this works fine. Now will search for the right recovery. Maybe somebody leave link here
I found temporary solution.https://4pda.ru/forum/dl/post/18912044/twrp_for_andr.10.tar
You should flash it in odin like usual twrp, then format data, reboot to recovery and flash magisk debug(https://4pda.ru/forum/dl/post/18911692/magisk-debug.zip) . Works fine.
And you must be registred to be allowed to download from there else you get an error
NegilisticBluesman said:
I found temporary solution.https://4pda.ru/forum/dl/post/18912044/twrp_for_andr.10.tar
You should flash it in odin like usual twrp, then format data, reboot to recovery and flash magisk debug(https://4pda.ru/forum/dl/post/18911692/magisk-debug.zip) . Works fine.
And you must be registred to be allowed to download from there else you get an error
Click to expand...
Click to collapse
dude first link is giving me errors....can you plz share an updated link, i too want to flash custom ROM
btw which custom ROM are u using, i heard pixel Experience and Lineage OS are some good ones.
luke martinez said:
dude first link is giving me errors....can you plz share an updated link, i too want to flash custom ROM
btw which custom ROM are u using, i heard pixel Experience and Lineage OS are some good ones.
Click to expand...
Click to collapse
https://4pda.ru/forum/index.php?showtopic=948701&view=findpost&p=94153866
Im using Lineage os 17.1, there are two bugs: mtp(but in twrp it works) and when u are using bluetooth headset incoming call's sound will go through speaker
NegilisticBluesman said:
https://4pda.ru/forum/index.php?showtopic=948701&view=findpost&p=94153866
Im using Lineage os 17.1, there are two bugs: mtp(but in twrp it works) and when u are using bluetooth headset incoming call's sound will go through speaker
Click to expand...
Click to collapse
hey man, its again giving me download error :crying::crying:can you give me another download link to TWRP for Andriod 10?? Thanks
btw system partition type for GSi rom - A or A/B ??:fingers-crossed:
You must be registred at this forum or u wont be allowed to download. A or A/B? I dont know about this.
NegilisticBluesman said:
You must be registred at this forum or u wont be allowed to download. A or A/B? I dont know about this.
Click to expand...
Click to collapse
sorry i don't know russian..can you please upload that TWRP to google drive or any other site
Hey bro help me by uploading twrp here.
Forum is completely russian and moreover i can't make account or download anything cause even CAPTCHA are in Russian language.
EDIT: IGNORE IT ,I MADE AN ACCOUNT SOMEHOW!!! THANKS FOR NOT REALLY HELPING ME FOR ASKING FOR SO LONG!:highfive:
luke martinez said:
Hey bro help me by uploading twrp here.
Forum is completely russian and moreover i can't make account or download anything cause even CAPTCHA are in Russian language.
EDIT: IGNORE IT ,I MADE AN ACCOUNT SOMEHOW!!! THANKS FOR NOT REALLY HELPING ME FOR ASKING FOR SO LONG!:highfive:
Click to expand...
Click to collapse
if u still need here is completly working twrp for samsung a30: https://drive.google.com/file/d/1fnXYqD_lyogDbjx9MnJ51cM2PmMoImc4/view?usp=sharing:highfive: