Hi everyone,
I got an P20 PRO Build: CLT-L29 9.0.0.159(C33E3R1P9) that as the following issues:
-FRP Locked
-Can't get into FASTBOOT mode (i press VOLUME DOWN, and i plug into computer and it just starts charging.
- I tried to Upgrade /Downgrade the firmware using OTG cable by dialing *#*#2846579#*#*
no sucess, i tried other fw packages to make sure...
-The i tried to use the Firmware Finder method, changing the router DCHP DNS, without any sucess aswell...
I don't know what to do, i really need some help :/
Have you try to downgrade in HiSuite?
masze said:
Have you try to downgrade in HiSuite?
Click to expand...
Click to collapse
Hey mate, well I think that I would need to get the phone into FASTBOOT mode, correct?
Somehow I can’t get the phone into that mode, I tried everything.
No, just connect your phone with hisuite on pc.
Possible can you downgrade there.
I can downgrade from 9 to 8 in hisuite
Related
Regards to all,
what to do to the specified phone able to use a USB flash memory via OTG cable?
BojanT88 said:
Regards to all,
what to do to the specified phone able to use a USB flash memory via OTG cable?
Click to expand...
Click to collapse
does anyone have an idea?
BojanT88 said:
does anyone have an idea?
Click to expand...
Click to collapse
My device (NEM-L21) doest support OTG.
But if you can or if you have unlock(ed) bootloader, you can install kernel or ROM, which supports OTG. You only cant use normal OTG cable, you need Y OTG cable. It like normal OTG cable, but there is added one USB which is used to power it and you connect it into charger, i think. Search on Google 'Y OTG cable' and you will see. But ROM / kernel support is needed first.
I think I made a big problem ...
Today I unlocked the bootloader, root did, then TWRP and SuperSU. I followed the advice from the forums and youtube. However When you turn on the phone, two things happen: or to use TWRP or appears Huawei eRecovery, which can not be download...
my phone is now unusable. What do I do and where I made a mistake?
any help is appreciated!
Any?
After several attempts to fix my problem now, when I set out to do a reboot TWRP recovery go out me notice: No OS instaled.
Looks like I'm all messed up...
BojanT88 said:
After several attempts to fix my problem now, when I set out to do a reboot TWRP recovery go out me notice: No OS instaled.
Looks like I'm all messed up...
Click to expand...
Click to collapse
https://forum.xda-developers.com/ho...covery-stock-recovery-download-honor-t3521504
Here is stock recovery for NEM L22.
Find stock recovery for your model if you dont have NEM-L22(i might work too, but i dont know) and flash it, proably via fastboot.
Then download stock firmware for your phone, you find it on huawei website. (Or you can try from here https://forum.xda-developers.com/ho...lota-upgrade-packages-models-nem-l51-t3473110)
You should create folder dload in root of sd card and here put UPDATE.APP file, which you extract from stock firmware. Then you should do force update - turn off device, the press all three keys (vol + ol - power) once.
Or you can try to install some custom ROM for our device.
Odesláno z mého NEM-L21 pomocí Tapatalk
Hello guys
When i try to connect my P9 to my pc with usb nothings happening. It only charges the phone. I have tried to reset the phone but nothing different is happening, it also does not want to boot into fastboot mode...
by the way bootloader is unlocked
Would really appreciate some help here
hadidwahedi1 said:
Hello guys
When i try to connect my P9 to my pc with usb nothings happening. It only charges the phone. I have tried to reset the phone but nothing different is happening, it also does not want to boot into fastboot mode...
by the way bootloader is unlocked
Would really appreciate some help here
Click to expand...
Click to collapse
Go to the the developer options and turn on "Always prompt when connecting to USB" . Should work.
Jan Philipp said:
Go to the the developer options and turn on "Always prompt when connecting to USB" . Should work.
Click to expand...
Click to collapse
Tried that, but that doesn't work either
hello again, can someone suggest me a guide or web page to guide me as unbrick my huawei p10, I do not have access to the fastboot mode and I have TWRP but I can not mount any part of the storage (therefore I can not install .zip or .img ). I think TWRP is blocked but I have been doing it for days and I have not been able to do anything.
Also, I can access the e-recovery and make a factory restoration with a microsd.
I appreciate any help. Thank you.
Can you try to turn off phone completly, then hold volume down and connect usb cabel which is connected to pc?
This is the only way i can put my P10 in fastboot mode
nocio said:
Can you try to turn off phone completly, then hold volume down and connect usb cabel which is connected to pc?
This is the only way i can put my P10 in fastboot mode
Click to expand...
Click to collapse
Yes dude! but the phone dont enter to the fastboot mode... for now i am trying in a technical service u.u
sorry for my bad english...
Hello,
So I happen to somehow hard brick my huawei p10 via HiSuite while downgrading from EMUI 9.1.0.262 to 9.0.1.180 and to 8.0.0 (dont know which version). After phone finished downgrading to 8.0 its suddenly turned off and it wont turn back again. When I plug it to the charger the phone gets warm, while on computer (connected via usb) its recognized as fastboot device. I tried shorting testpoint but I couldnt get SERAIL recognition.
Please help me, I wanna save this bease I know it still has potential.. Huawei is so damn dumb when it comes to software support and firmware updates via PC unlike Xiaomi, Samsung whom have Odin and MiFlash.
its sad, big minus for huawei
kenzyyy said:
Hello,
So I happen to somehow hard brick my huawei p10 via HiSuite while downgrading from EMUI 9.1.0.262 to 9.0.1.180 and to 8.0.0 (dont know which version). After phone finished downgrading to 8.0 its suddenly turned off and it wont turn back again. When I plug it to the charger the phone gets warm, while on computer (connected via usb) its recognized as fastboot device. I tried shorting testpoint but I couldnt get SERAIL recognition.
Please help me, I wanna save this bease I know it still has potential.. Huawei is so damn dumb when it comes to software support and firmware updates via PC unlike Xiaomi, Samsung whom have Odin and MiFlash.
its sad, big minus for huawei
Click to expand...
Click to collapse
Tip for getting the testpoints to work:
* Disconnect the battery. You'll have to remove the plate over the battery connector.
* Plug in your USB cable to the phone - leave it disconnected from the computer.
* Short the testpoint.
* Plug the cable into the computer while keeping the testpoint shorted.
It should now come up in serial mode. You can, at your own risk, reconnect the battery now - I've never had a problem doing this, but the socket is now live so...
irony_delerium said:
Tip for getting the testpoints to work:
* Disconnect the battery. You'll have to remove the plate over the battery connector.
* Plug in your USB cable to the phone - leave it disconnected from the computer.
* Short the testpoint.
* Plug the cable into the computer while keeping the testpoint shorted.
It should now come up in serial mode. You can, at your own risk, reconnect the battery now - I've never had a problem doing this, but the socket is now live so...
Click to expand...
Click to collapse
Thanks for replying..
I get the testpoint working but after I get it to work PC doesn't recognize testpoint mode. I tried everything the phone is dead, it's stuck in fastboot..
I just want to get it to work it's all I want, I just want to flash any system on it I tried LINUX method but it's the same issue testpoint not recognized by PC other modes are recognized.
kenzyyy said:
Thanks for replying..
I get the testpoint working but after I get it to work PC doesn't recognize testpoint mode. I tried everything the phone is dead, it's stuck in fastboot..
I just want to get it to work it's all I want, I just want to flash any system on it I tried LINUX method but it's the same issue testpoint not recognized by PC other modes are recognized.
Click to expand...
Click to collapse
On Windows, you'll have to dig up some very specific drivers for the port.
On Linux, you need to make sure things like ModemManager aren't installed, as Linux directly recognizes the serial port exposed by the device, and if you have a package installed that tries autodetecting modems, it screws with the serial mode of the device - it's not terribly tolerant of protocol data that it doesn't understand.
irony_delerium said:
On Windows, you'll have to dig up some very specific drivers for the port.
On Linux, you need to make sure things like ModemManager aren't installed, as Linux directly recognizes the serial port exposed by the device, and if you have a package installed that tries autodetecting modems, it screws with the serial mode of the device - it's not terribly tolerant of protocol data that it doesn't understand.
Click to expand...
Click to collapse
Thank you again for replying.
Now I'm getting this in device manager (see picture)
So I've got this how in the heck do I get it working again? Is there any software that allows me to get it running? Plz don't recommend DC phoenix I've paid them and I didn't have so much luck with them..
:good:
kenzyyy said:
:good:
Click to expand...
Click to collapse
From there, you need to load the IDT mode fastboot, and then in theory you can reflash everything else.
Check elsewhere, I've seen a package floating around for restoring from a brick situation here. Otherwise, your choices are pretty much DC Phoenix or to go tracking down internal Huawei tools, as those are the only other pieces of software I know of for flashing the device back from such a brick situation.
irony_delerium said:
From there, you need to load the IDT mode fastboot, and then in theory you can reflash everything else.
Check elsewhere, I've seen a package floating around for restoring from a brick situation here. Otherwise, your choices are pretty much DC Phoenix or to go tracking down internal Huawei tools, as those are the only other pieces of software I know of for flashing the device back from such a brick situation.
Click to expand...
Click to collapse
How can I find it? I have found this thread currently I am downloading all necessary files + it's for Kirin 960 which is good I think. So do you think this will work? Here is the link: https://forum.xda-developers.com/mediapad-m5/how-to/downgrade-unbrick-huawei-device-methods-t3915693
U dont need hikey, just use image download tool 2.0.0.9
kikson112 said:
U dont need hikey, just use image download tool 2.0.0.9
Click to expand...
Click to collapse
So even if my device is recognized in fastboot and serial port (test point) mode it means I can unbrick it with Image Download Tool by flashing stock firmware? Cause my device is super duper dead black screen stuck in fastboot tried every single key combination plus I've let it charge for 2 nights still nothing and PC still recognizes in fastboot only..
EDIT: My bootloader is locked.
Thanks for replying btw! :highfive:
writing by idm is from test point usb com 1.0, i cant promis u that all goes well, probably imei will gone, beckup oem info from fastboot it may be help for future,
and if all goes bad, u cant do anythink more, feel free to contact me
kenzyyy said:
So even if my device is recognized in fastboot and serial port (test point) mode it means I can unbrick it with Image Download Tool by flashing stock firmware? Cause my device is super duper dead black screen stuck in fastboot tried every single key combination plus I've let it charge for 2 nights still nothing and PC still recognizes in fastboot only..
EDIT: My bootloader is locked.
Thanks for replying btw! :highfive:
Click to expand...
Click to collapse
3 Step Game
1st Write Board Firmware By Furious Gold Or DC Phoenix & Free TOOL IDT 2.0.0.9
2nd When Phone Powered On write Oem Info Model: VTR-L29 Vendor: hw , Country: eu
3rd Flash Stock Firmware 9.1 Or 9.0 ( C432 )
Game Over
if you need board firmware or stock firmware let me know
imeicodes said:
3 Step Game
1st Write Board Firmware By Furious Gold Or DC Phoenix & Free TOOL IDT 2.0.0.9
2nd When Phone Powered On write Oem Info Model: VTR-L29 Vendor: hw , Country: eu
3rd Flash Stock Firmware 9.1 Or 9.0 ( C432 )
Game Over
if you need board firmware or stock firmware let me know
Click to expand...
Click to collapse
Could you please post the necessary FW for P10 VTR-L29 9.0.1.185(C432E1R1P9)?
As I understand it would be the firmware with XML so i can use the Image download tool to flash it?
Thank you
Hi guys,
I think I have bricked my phone definetley. I did a couple of bad things. First I disconneted the usb cable while flashing with Odine, then, worse I closed odin and the phone went into emergency recovery mode. I tryed to use Smart Swithc to revoer it but it daoes not connect with th W10 Pc. The only thing I can do is to switch off using power and volume down but then it restart atutomatically and shws the emergency recovery screen. I have tryed all te uttons combinations found on the web, but the stubborn piece od hardware does not hear me, Is there someone that cne help me? I am close to use a hammer...
Hey there, when the phone is in emergency recovery mode, does it show up in Odin? If yes, you can try flashing the firmware again. It should work.
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
enzo-ita said:
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
Click to expand...
Click to collapse
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
RVR said:
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
enzo-ita said:
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
Click to expand...
Click to collapse
Happy to hear that!