Hi guys,
I think I have bricked my phone definetley. I did a couple of bad things. First I disconneted the usb cable while flashing with Odine, then, worse I closed odin and the phone went into emergency recovery mode. I tryed to use Smart Swithc to revoer it but it daoes not connect with th W10 Pc. The only thing I can do is to switch off using power and volume down but then it restart atutomatically and shws the emergency recovery screen. I have tryed all te uttons combinations found on the web, but the stubborn piece od hardware does not hear me, Is there someone that cne help me? I am close to use a hammer...
Hey there, when the phone is in emergency recovery mode, does it show up in Odin? If yes, you can try flashing the firmware again. It should work.
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
enzo-ita said:
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
Click to expand...
Click to collapse
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
RVR said:
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
enzo-ita said:
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
Click to expand...
Click to collapse
Happy to hear that!
Related
Hello there,
I am Belgian so i'm gonna try to do my best to find my english somewhere
I have a samsung galaxy s3 mini gt-i8190..
I have tried to flash with odin thru pda BUT it stopped with fail as result..
Then i have tried to put original firmware back the same way but fail again,
then tried again with same original firmware and succeeded..
Phone froze at samsung logo, tried again and now i got the message "firmware upgrade encountered an issue. please select recovery mode in Kies & try again."
Ok, so i plug the phone back in the usb cable: Device Not Recognized! (windows 7 ultimate laptop).
I can get in to download mode: still not recognized via usb.
recovery mode DOESN'T work at all (3 button combo) just the error message at the normal boot and the download mode.
So basically i can't flash cause i can't connect, reinstalled drivers, used another pc, same thing...
It doesn't even charge the phone..
Odin mode says:
Product name: GT-I8190
Custom Binary Download: YES (4 counts)
Current binary: Custom
System status: Official
So does there somehow any file exists to put on my sd card to access usb OR a file to go into recovery mode.
Any tip is welcome, will try them all..
Thanks by advance,
yoni089
Have you tried installing Samsung's USB Driver? I know installing kies comes with the USB drivers but just in case. You might want to check if it's properly installed in your computer. Try reseting your counter first with Triangle Away. Please tell me more of what you did.
Click on the thanks button if I helped!
Change usb port and make sure all processes with kies are killed in taskmanager.
Open Odin. Put the phone in download mode and connect usb.
Hello,
Thanks for the reply's
I did install Odin first, when i flashed my phone it failed..
So i decided to install kies to make sure i had the right drivers,
Uninstalled Kies without the drivers. The phone was still recognized back then!!
Flashed it again and again FAIL!
Since then NOTHING works with the usb connection, windows does not recognize my phone "unknown device".
So it doesnt even know what it is..
Uninstalled the drivers and reinstalled them, rebooted my laptop with battery out for a minute but nothing works..
Also i tried to connect to another pc but no luck..
So i guess the key on my phone for the driver to find is missing/deleted by flashing and failing..
That's why i asked if there is any file to putt on my sd card to be recognized by my computer.
I did tried many times using another usb port..
Also tried with and without sim card/ sd card.
(btw: does they have to be in there anyway?)
Thnx and grtz,
Yoni089
please post where odin fail?
samersh72 said:
please post where odin fail?
Click to expand...
Click to collapse
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
yoni089 said:
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
Click to expand...
Click to collapse
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
SethCode'z said:
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
Click to expand...
Click to collapse
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
yoni089 said:
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
Click to expand...
Click to collapse
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
SethCode'z said:
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
Click to expand...
Click to collapse
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
yoni089 said:
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
Click to expand...
Click to collapse
Did your three button combination work for recovery mode before this happened?
tys0n said:
Did your three button combination work for recovery mode before this happened?
Click to expand...
Click to collapse
I have no idea, i never needed it before..
yoni089 said:
I have no idea, i never needed it before..
Click to expand...
Click to collapse
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
tys0n said:
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
Click to expand...
Click to collapse
It just turns on to the triangle that says there is an issue with the firmware upgrade..
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
Do provide the odin log, probably corrupted PIT ?
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
linux is your answer it never fails
Sent from my Vodafone Smart II using xda premium
AssToast said:
Do provide the odin log, probably corrupted PIT ?
Click to expand...
Click to collapse
How do i get that log?
tys0n said:
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
Click to expand...
Click to collapse
no it doesn't, not even my laptop does..
yoni089 said:
How do i get that log?
no it doesn't, not even my laptop does..
Click to expand...
Click to collapse
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
nuotal you
tys0n said:
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
Click to expand...
Click to collapse
I did it all
Yes it was the original usb cable..
I had flashed phone.. Phone was giving me issues . so I went into twrp was going to reflash phone. I cleaned wiped everything out. Now phone says no os system. computer will not see phone but charges the phone. also odin doesn't see phone. I have installed and uninstalled Samsung drivers still cant get computer to see phone...Help please::crying::crying::crying::crying:
lwhite900 said:
I had flashed phone.. Phone was giving me issues . so I went into twrp was going to reflash phone. I cleaned wiped everything out. Now phone says no os system. computer will not see phone but charges the phone. also odin doesn't see phone. I have installed and uninstalled Samsung drivers still cant get computer to see phone...Help please::crying::crying::crying::crying:
Click to expand...
Click to collapse
When you say Odin doesn't see the phone, I presume you had put the phone into download mode?
the phone doesnt register in odin or with my computer. i need to know how to make my computer see the phone so i can use odin to fix it.
lwhite900 said:
the phone doesnt register in odin or with my computer. i need to know how to make my computer see the phone so i can use odin to fix it.
Click to expand...
Click to collapse
For the second time, did you put the phone into download mode? Odin isn't going to "see" it if it isn't in download mode.
I go into download mode and odin doesn't see. my computer doesn't recognize the phone at all. I want to know how to get computer to recognize that phone is connected so I can run odin or hard push file to phone.
lwhite900 said:
I go into download mode and odin doesn't see. my computer doesn't recognize the phone at all. I want to know how to get computer to recognize that phone is connected so I can run odin or hard push file to phone.
Click to expand...
Click to collapse
Like @cwhiatt is saying, are you certain you're in download mode - by pressing and holding volume down + home + power? If you're in TWRP, that's recovery mode, not download. Just want to make sure that's not the issue here.
In download mode there should be a blue/green screen that says "Downloading... Do not turn off target".
Ishmael89 said:
Like @cwhiatt is saying, are you certain you're in download mode - by pressing and holding volume down + home + power? If you're in TWRP, that's recovery mode, not download. Just want to make sure that's not the issue here.
In download mode there should be a blue/green screen that says "Downloading... Do not turn off target".
Click to expand...
Click to collapse
Yes I am in download mood. My computer and other computers don't see the phone. I feel I will have to pay to have it jtag. so I can get my phone back. as no one is helping
lwhite900 said:
Yes I am in download mood. My computer and other computers don't see the phone. I feel I will have to pay to have it jtag. so I can get my phone back. as no one is helping
Click to expand...
Click to collapse
Have you tried other cables? Other ports? Other computers?
some usb cables are for power only while others do data if it has just a lightning bolt on it, that's a charger if it has the universal usb logo that's data cable.
Your problem is fixed ?
So my problem is that i wanted to root my Huawei Mate S, so I had to unlock the Bootloader.
It said that it was successful and unlocked, so I continued rooting, which seemed fine.
But then I got stuck in a bootload and I havent been able to access my phone ever since.
At first I was able to charge it, because the red LED was flashing, but nothing else happened.
Now I can´t do anything; If it´s connected to Power all it does is vibrating one short time, if I try to access Download- or Recovery-Mode, which means that its not detected by the PC...
Is there any way to fix it?
Thanks in advance.
Dailvorn said:
So my problem is that i wanted to root my Huawei Mate S, so I had to unlock the Bootloader.
It said that it was successful and unlocked, so I continued rooting, which seemed fine.
But then I got stuck in a bootload and I havent been able to access my phone ever since.
At first I was able to charge it, because the red LED was flashing, but nothing else happened.
Now I can´t do anything; If it´s connected to Power all it does is vibrating one short time, if I try to access Download- or Recovery-Mode, which means that its not detected by the PC...
Is there any way to fix it?
Thanks in advance.
Click to expand...
Click to collapse
Install trwp3 and then install custom eumi5 rom backupfile sr1
nortonnc said:
Install trwp3 and then install custom eumi5 rom backupfile sr1
Click to expand...
Click to collapse
But how am I suppossed to do so, if I can't access my phone at all ( no recovery-/ download-mode)and my computer won't recognize it being connected?
have you tried to charge the phone only via the pc usb port or did you use a wall charger? it wouldn't hurt to connect it to a wall charger and let it rest a few hours if you haven't done that yet. then try to connect it to the pc and to try turning it on either in recovery or fastboot mode.
thyssen2k said:
have you tried to charge the phone only via the pc usb port or did you use a wall charger? it wouldn't hurt to connect it to a wall charger and let it rest a few hours if you haven't done that yet. then try to connect it to the pc and to try turning it on either in recovery or fastboot mode.
Click to expand...
Click to collapse
I actually did use a wall charger, but I'm still not able to do anything...
I just don't understand why it is vibrating when I try to boot into recovery mode...
To me that means that the phone is not completely dead...
So no one actually hast an idea?
Dailvorn said:
So no one actually hast an idea?
Click to expand...
Click to collapse
Nope, but I feel you: https://forum.xda-developers.com/mate-s/help/fullbricked-mate-s-signs-life-whatsoever-t3357711
Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q
I can help you, just visit my blog
tickernel.tk
Present status
QbaQbaPL said:
Hi,
Today i bricked/hard bricked my X620. I had TWRP 3.0.x, but i decide to flash with 3.1.x. I made it through by commands in windows using twrp.img file, and finished with fastboot reboot command, and phone died. Last info was something with the flow. I read many threads, and i found, that it's not alowd to finish flashing with this command. Now, im not able to switch on my phone, enter fastboot or TWRP, and when i conect my phone to pc, red light apears and i can hear a sound i win7 that something has been connected to pc, and disconnect, and connected, disconnected ...................., and nothing i happening with the phone. So, i'm not able to connect my phone to pc to make new flash by flash tool.
Can somebody help me with this problem????
Q
Click to expand...
Click to collapse
Is it solved? I am also facing same problem.
BiswashKoirala said:
Is it solved? I am also facing same problem.
Click to expand...
Click to collapse
I am facing the same problem as well. Can anybody help pls??
No..I tried few solutions but the phone was still dead. So I bought a new phone.
Bootloader type = Oxygen (not sure if that is the proper one for the device though)
Bootloader lock = Unlocked via Xiaomi official procedure
USB Debug = Not sure, I'm starting to fear it's off though
Original issue = My phone was bricked. No sound, display or whatsoever.
What did I try?
I followed an unbrick tutorial which made me flash an Oxygen firmware file. After that I get a boot loop. Mi logo and Android loading bar appears and seems to be like that continuously.
I can't access either fastboot or recovery mode. If I try any of the two button combinations I don't even get the Mi logo screen. I see the backlight turn on and nothing happens.
I tried flashing several fastboot roms, stock roms and firmware files I could find, flashing them with different versions of MiFlash. Except for the one I described in step 1 none of them change the situation as described in 'Original issue'.
I need to use the 'test pin method' to even let the computer detect the phone in MiFlash. The phone does not get detected inADB fasboot (which makes sense, as I can't enter fastboot mode anyway).
I'm hoping someone can point me in a direction which leads me to fix my phone. I'm not sure what steps I did to even get to the point where it stopped responding in any way. It has been some time ago, but I think I flashed an Oreo firmware file just before that point.
i did tryied test point (edl mode) and i think either i connect wrong point together or my rom was wrong and my phone can not boot or show anything . when connect to charge it shows key light flashing without any picture in the screen and without any vibration after pushing power button . i either dont have acces to fastboot now . what is wrong with my phone ?
Esemtix said:
i did tryied test point (edl mode) and i think either i connect wrong point together or my rom was wrong and my phone can not boot or show anything . when connect to charge it shows key light flashing without any picture in the screen and without any vibration after pushing power button . i either dont have acces to fastboot now . what is wrong with my phone ?
Click to expand...
Click to collapse
If you find the right points you can get into edl. Did you try a cable already?
Arealhooman said:
If you find the right points you can get into edl. Did you try a cable already?
Click to expand...
Click to collapse
i dont know i connect right point together or not but my phone name changed when connect to pc with xiaomi fastboot installer and i gave my phone to a developer and he install a lot of roms with edl mode ,too but there is no change
Try using edl cable
Arealhooman said:
Try using edl cable
Click to expand...
Click to collapse
i dont need any box tool for use it ?
What do you mean?
Arealhooman said:
What do you mean?
Click to expand...
Click to collapse
boxes like flash you can connect to pc and acces more thing for connecting to your phone
i mean i wont need anything like these except edl cable ?
sorry i ask too many questions
Esemtix said:
boxes like flash you can connect to pc and acces more thing for connecting to your phone
i mean i wont need anything like these except edl cable ?
sorry i ask too many questions
Click to expand...
Click to collapse
Nah it’s k. You still need the right files, but most of the time a edl cable can get you in.
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
janus.8x said:
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
Click to expand...
Click to collapse
Someone told me the phone got hard problem .
janus.8x said:
i did tryied edl mode and just black screen does shows. what should i do ? my phone either doesn not vibrate when connect to charge
Click to expand...
Click to collapse
hi . I tried to flash the phone a lot but still the phone keys light are just on when I connect the phone to charger and when I disconnected it , it is off even when I push power key
what should I do ?