Hard-Bricked Huawei Mate S - any way to fix it? - Huawei Mate S

So my problem is that i wanted to root my Huawei Mate S, so I had to unlock the Bootloader.
It said that it was successful and unlocked, so I continued rooting, which seemed fine.
But then I got stuck in a bootload and I havent been able to access my phone ever since.
At first I was able to charge it, because the red LED was flashing, but nothing else happened.
Now I can´t do anything; If it´s connected to Power all it does is vibrating one short time, if I try to access Download- or Recovery-Mode, which means that its not detected by the PC...
Is there any way to fix it?
Thanks in advance.

Dailvorn said:
So my problem is that i wanted to root my Huawei Mate S, so I had to unlock the Bootloader.
It said that it was successful and unlocked, so I continued rooting, which seemed fine.
But then I got stuck in a bootload and I havent been able to access my phone ever since.
At first I was able to charge it, because the red LED was flashing, but nothing else happened.
Now I can´t do anything; If it´s connected to Power all it does is vibrating one short time, if I try to access Download- or Recovery-Mode, which means that its not detected by the PC...
Is there any way to fix it?
Thanks in advance.
Click to expand...
Click to collapse
Install trwp3 and then install custom eumi5 rom backupfile sr1

nortonnc said:
Install trwp3 and then install custom eumi5 rom backupfile sr1
Click to expand...
Click to collapse
But how am I suppossed to do so, if I can't access my phone at all ( no recovery-/ download-mode)and my computer won't recognize it being connected?

have you tried to charge the phone only via the pc usb port or did you use a wall charger? it wouldn't hurt to connect it to a wall charger and let it rest a few hours if you haven't done that yet. then try to connect it to the pc and to try turning it on either in recovery or fastboot mode.

thyssen2k said:
have you tried to charge the phone only via the pc usb port or did you use a wall charger? it wouldn't hurt to connect it to a wall charger and let it rest a few hours if you haven't done that yet. then try to connect it to the pc and to try turning it on either in recovery or fastboot mode.
Click to expand...
Click to collapse
I actually did use a wall charger, but I'm still not able to do anything...
I just don't understand why it is vibrating when I try to boot into recovery mode...
To me that means that the phone is not completely dead...

So no one actually hast an idea?

Dailvorn said:
So no one actually hast an idea?
Click to expand...
Click to collapse
Nope, but I feel you: https://forum.xda-developers.com/mate-s/help/fullbricked-mate-s-signs-life-whatsoever-t3357711

Related

[Q] Sony Xperia T LT30P hard bricked?

Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
biegan said:
Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
Click to expand...
Click to collapse
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
gregbradley said:
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
Click to expand...
Click to collapse
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
biegan said:
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
Click to expand...
Click to collapse
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
biegan said:
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
Click to expand...
Click to collapse
I forgot to add when i'm doing test point to unlock for example ARC it is also recognised as ZEUS Flash so i thing it stays in some king of boot mode but there is no information in the net how to kick it out or even do jtag because i can doit also but i think it is not supported yet
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
Click to expand...
Click to collapse
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
gregbradley said:
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
Click to expand...
Click to collapse
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
biegan said:
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
Click to expand...
Click to collapse
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
gregbradley said:
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
Click to expand...
Click to collapse
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
biegan said:
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
Click to expand...
Click to collapse
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
gregbradley said:
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
Click to expand...
Click to collapse
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
biegan said:
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
Click to expand...
Click to collapse
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
gregbradley said:
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
Click to expand...
Click to collapse
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
biegan said:
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
Click to expand...
Click to collapse
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
gregbradley said:
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
Click to expand...
Click to collapse
Thanks bro anyway for your help!!
any update about your device...
i have exactly same problem as you mentioned but my device is Xperia V (LT25i)....
waiting for your reply. please do update.
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
bambox said:
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
Click to expand...
Click to collapse
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
gregbradley said:
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
Click to expand...
Click to collapse
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
bambox said:
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
Click to expand...
Click to collapse
put it on charge for 24 hours and leave it alone.
after the 24 hours turn it on.

[Q] {HELP] usb and charging not working

when i connect my phone with USB to PC.
windows shows notification that malfluctuation in usb installation. http://forum.xda-developers.com/images/smilies/crying.gif
and i cant able to flash the software.
i try it by factory reseting the phone..
but still it was not working..
sorry for bad english but plz help me out..
i cant able to charge my phone.. some time it show battery full notification..
plz help me out..
http://forum.xda-developers.com/images/icons/advanced/battery_full.png
http://forum.xda-developers.com/images/icons/icon9.gif
Reinstall the driver
Downlod the latest drivers..
And also factory reset it many times..
But can able to connect to my pc or other pc.
I tried different cable but not working. ..
Rahul125125 said:
Downlod the latest drivers..
And also factory reset it many times..
But can able to connect to my pc or other pc.
I tried different cable but not working. ..
Click to expand...
Click to collapse
Probably a hardware problem then....
I have had the same problem for a few weeks now. It started to fail occasionally and right now the usb won't work unless you reboot the phone. If i'm running out of battery, i must connect the charger and reboot for the phone to charge. And when the phone is charged, if I unplug the charger, the phone thinks it's still connected.... that is until you reboot again. It's a pain in the ass because also the phone wont go to deep sleep (ab8500 charger attached wakelock is keeping it awake at all times).
I was waiting for mi carrier (Movistar, Argentina) to update to Jelly Bean so i wouldn't need to downgrade (as i read some people experience CSC problems when downgrading) but I'm starting to grow impatient...
Same problem dude..

[Q] Did I just hard-brick my Xperia T?

Hello.
I was installing different boot.img by Flashify app. Then I was asked to restart my phone, pressed the button and... nothing.
My phone doesn't turn on, LED doesn't blink while connected to adapter, phone is recognized as Qualcomm HS-USB QDLoader 9008.
I'm 99% sure my phone is hardbricked, but I'm not going to lose it. If there are any possible solutions to recovery it, I'll risk to keep my phone alive (or dead).
Thanks for any response
Fastlone
fastlone said:
Hello.
I was installing different boot.img by Flashify app. Then I was asked to restart my phone, pressed the button and... nothing.
My phone doesn't turn on, LED doesn't blink while connected to adapter, phone is recognized as Qualcomm HS-USB QDLoader 9008.
I'm 99% sure my phone is hardbricked, but I'm not going to lose it. If there are any possible solutions to recovery it, I'll risk to keep my phone alive (or dead).
Thanks for any response
Fastlone
Click to expand...
Click to collapse
If it is hard bricked then open the phone disconnect the battery and reconnect it..then use flashtool to flash a kernel with recovery and flash another rom..you should then be good to go!
@PeterGeorgiou already tried it, gives nothing.
fastlone said:
@PeterGeorgiou already tried it, gives nothing.
Click to expand...
Click to collapse
Try to press and hold volume up and power simultaneously and connect to pc. I managed to recover my XV that way.
If it doesnt work, take battery out and in and retry.
Good luck!!
Still nothing :/
Second question: is there any chance that if I send it for a guarantee, sony experts won't find that my phone was modificated?
fastlone said:
Still nothing :/
Second question: is there any chance that if I send it for a guarantee, sony experts won't find that my phone was modificated?
Click to expand...
Click to collapse
All you have to do is put the phone in fastboot mode and use Flashtool to flash a stock kernel or the kernel for your ROM if you're on a Custom ROM, which is the first thing a repair shop will do if you tell them what you did and/or if they really are "experts". You should google how to put your phone in fastboot mode since I've already heard about several people saying they've ruined their phone when in fact they just have no idea how to put it into fastboot/flash mode properly.
If they manage to boot up the phone they will see that you've at the very least rooted your phone and installed apps that require root, so you might want to consider that.
Antiga Prime said:
All you have to do is put the phone in fastboot mode and use Flashtool to flash a stock kernel or the kernel for your ROM if you're on a Custom ROM, which is the first thing a repair shop will do if you tell them what you did and/or if they really are "experts". You should google how to put your phone in fastboot mode since I've already heard about several people saying they've ruined their phone when in fact they just have no idea how to put it into fastboot/flash mode properly.
If they manage to boot up the phone they will see that you've at the very least rooted your phone and installed apps that require root, so you might want to consider that.
Click to expand...
Click to collapse
If I was able to put my phone in fastboot mode, I wouldn't make this thread. Main reason of creating this topic is that I can't access my phone in any way including many combinations of keys, disconnecting battery etc.
fastlone said:
If I was able to put my phone in fastboot mode, I wouldn't make this thread. Main reason of creating this topic is that I can't access my phone in any way including many combinations of keys, disconnecting battery etc.
Click to expand...
Click to collapse
I know, I'm just saying because, just as you, I've seen other people make threads because they say they can't do this and that, and then it turns out they just don't know what they are doing. You wouldn't be the first person who couldn't get into fastboot mode, when in fact, didn't know how to get into fastboot mode, which is why I reminded you, because if a Sony Service Center does in fact boot up your phone and see you have rooted, that might most likely void your warranty and you'd have to pay; so it's best if you really figure out if you actually know how to get into fastboot/flash mode.
fastlone said:
Hello.
I was installing different boot.img by Flashify app. Then I was asked to restart my phone, pressed the button and... nothing.
Click to expand...
Click to collapse
What boot.img have you installed?
Is your bootloader unlocked?
istux said:
What boot.img have you installed?
Is your bootloader unlocked?
Click to expand...
Click to collapse
Of course it's unlocked :>
It's a boot.img from Omni ROM dated on 09.23.2014. Rom I've installed is WhiteNeo's NeoWave based on CM11.
fastlone said:
Hello.
I was installing different boot.img by Flashify app. Then I was asked to restart my phone, pressed the button and... nothing.
My phone doesn't turn on, LED doesn't blink while connected to adapter, phone is recognized as Qualcomm HS-USB QDLoader 9008.
I'm 99% sure my phone is hardbricked, but I'm not going to lose it. If there are any possible solutions to recovery it, I'll risk to keep my phone alive (or dead).
Thanks for any response
Fastlone
Click to expand...
Click to collapse
fastlone said:
Of course it's unlocked :>
It's a boot.img from Omni ROM dated on 09.23.2014. Rom I've installed is WhiteNeo's NeoWave based on CM11.
Click to expand...
Click to collapse
NeoWave is based on Omnirom... not CM11.
Boot.img had to be installed by Flashtool or manually in bootloader mode.
The only way is to connect to PC pressing volume UP.
Power+volumeUP is a good way to reset a wrong kernel.
No sign from your phone? No blue light?
Have you tried to change usb cable? To change PC?
If there's no red light when you connect the recharger, it's a bad sign though
istux said:
NeoWave is based on Omnirom... not CM11.
Boot.img had to be installed by Flashtool or manually in bootloader mode.
The only way is to connect to PC pressing volume UP.
Power+volumeUP is a good way to reset a wrong kernel.
No sign from your phone? No blue light?
Have you tried to change usb cable? To change PC?
If there's no red light when you connect the recharger, it's a bad sign though
Click to expand...
Click to collapse
Sorry, my bad.
Haven't switched USB cable (I've got only one), but I'm sure it works because I've checked it on my secondary phone.
Tried to do it on PC and also on my laptop, both don't work.
And a really bad thing is that when I connect my phone to recharger there's no red light.
fastlone said:
Sorry, my bad.
Haven't switched USB cable (I've got only one), but I'm sure it works because I've checked it on my secondary phone.
Tried to do it on PC and also on my laptop, both don't work.
And a really bad thing is that when I connect my phone to recharger there's no red light.
Click to expand...
Click to collapse
Perhaps you need to find a way to recharge your battery because it's to low for anything to happen?
Someone should inform the Flashify developer that his app bricks our phones.. Perhaps he can add some kind of device check to prevent this in future.
WhiteNeo said:
Perhaps you need to find a way to recharge your battery because it's to low for anything to happen?
Someone should inform the Flashify developer that his app bricks our phones.. Perhaps he can add some kind of device check to prevent this in future.
Click to expand...
Click to collapse
Any ideas how to recharge my battery?
fastlone said:
Any ideas how to recharge my battery?
Click to expand...
Click to collapse
There are some chargers like that on the market.
The question is if you want to invest the money and give it a try.
WhiteNeo said:
There are some chargers like that on the market.
The question is if you want to invest the money and give it a try.
Click to expand...
Click to collapse
Or just buy a new battery, which has always a little charge before installation.
A wrong kernel doesn't allow to recharge and the battery may discharge quickly, that's true, but the fact that after rebooting there was no sign is a very bad thing.
Maybe the battery was suddenly fried... who knows.. Yeah, give it a try.

My E1 Doesn't start, even if i let charging; will be dead?

I need help to know what to do, my xperia doesn't boot, i try to boot into fastboot/Flash mode, but even that doesn't works.
I hope that somebody can help me.
PD: This is the only "vital sign" of my phone (and only shows that when i plug to the electric current)
Deathgasm said:
I need help to know what to do, my xperia doesn't boot, i try to boot into fastboot/Flash mode, but even that doesn't works.
I hope that somebody can help me.
PD: This is the only "vital sign" of my phone (and only shows that when i plug to the electric current)
Click to expand...
Click to collapse
What ROM?
What you have done before it happens?
You really tried press Vol+ and plug usb cable on PC?
Nothing bro, the phone is clear, no unlocked boot, no root. no rom, nothing
Caio99BR said:
What ROM?
What you have done before it happens?
You really tried press Vol+ and plug usb cable on PC?
Click to expand...
Click to collapse
Nothing bro, the phone is clear, no unlocked boot, no root. no rom, nothing
Deathgasm said:
Nothing bro, the phone is clear, no unlocked boot, no root. no rom, nothing
Click to expand...
Click to collapse
Hmm OK, how many time this device have?
Anyway you checked usb port of pc and if a blue led is on when trying Vol+ (or Vol- I dont remember) and connecting?
Try to remeber last thing you have done before it (0% of battery, wrong charger ...)
I have solution
Caio99BR said:
Hmm OK, how many time this device have?
Anyway you checked usb port of pc and if a blue led is on when trying Vol+ (or Vol- I dont remember) and connecting?
Try to remeber last thing you have done before it (0% of battery, wrong charger ...)
Click to expand...
Click to collapse
Your solution is here:
forum.hovatek.com/thread-19721.html

S10 G-973F Android 11 Bricked

Hi guys,
I think I have bricked my phone definetley. I did a couple of bad things. First I disconneted the usb cable while flashing with Odine, then, worse I closed odin and the phone went into emergency recovery mode. I tryed to use Smart Swithc to revoer it but it daoes not connect with th W10 Pc. The only thing I can do is to switch off using power and volume down but then it restart atutomatically and shws the emergency recovery screen. I have tryed all te uttons combinations found on the web, but the stubborn piece od hardware does not hear me, Is there someone that cne help me? I am close to use a hammer...
Hey there, when the phone is in emergency recovery mode, does it show up in Odin? If yes, you can try flashing the firmware again. It should work.
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
enzo-ita said:
No, it does not. When i connect it to the pc I can hear the connetion sound and then immeditely after the disconnection. In other words it connects and then it disconnects on its own. This happens either if connect trough usb B or C. Thanks
Click to expand...
Click to collapse
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
RVR said:
Can you please try this?
Stuck in emergency recovery mode
I left my tablet charging overnight, i wanted to install crdroid so i unlocked and went into download mode, flashed the vbmeta from twrp and got an error saying it couldn't verify it. So i flashed the stock .md5 files but mid flash it turned off...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
enzo-ita said:
Thank again for your help. I do not know what I did, but suddenly the connection via USB C was detected by Odin so I was able to flash the firmware and the phone got life again. Thank again.
Enzo
Click to expand...
Click to collapse
Happy to hear that!

Categories

Resources