[Q] {HELP] usb and charging not working - Galaxy S Advance I9070 Q&A, Help & Troubleshooting

when i connect my phone with USB to PC.
windows shows notification that malfluctuation in usb installation. http://forum.xda-developers.com/images/smilies/crying.gif
and i cant able to flash the software.
i try it by factory reseting the phone..
but still it was not working..
sorry for bad english but plz help me out..
i cant able to charge my phone.. some time it show battery full notification..
plz help me out..
http://forum.xda-developers.com/images/icons/advanced/battery_full.png
http://forum.xda-developers.com/images/icons/icon9.gif

Reinstall the driver

Downlod the latest drivers..
And also factory reset it many times..
But can able to connect to my pc or other pc.
I tried different cable but not working. ..

Rahul125125 said:
Downlod the latest drivers..
And also factory reset it many times..
But can able to connect to my pc or other pc.
I tried different cable but not working. ..
Click to expand...
Click to collapse
Probably a hardware problem then....
I have had the same problem for a few weeks now. It started to fail occasionally and right now the usb won't work unless you reboot the phone. If i'm running out of battery, i must connect the charger and reboot for the phone to charge. And when the phone is charged, if I unplug the charger, the phone thinks it's still connected.... that is until you reboot again. It's a pain in the ass because also the phone wont go to deep sleep (ab8500 charger attached wakelock is keeping it awake at all times).
I was waiting for mi carrier (Movistar, Argentina) to update to Jelly Bean so i wouldn't need to downgrade (as i read some people experience CSC problems when downgrading) but I'm starting to grow impatient...

Same problem dude..

Related

[Q] Phone semi bricked and unknown device in download mode

Hey all,
I've got a problem related to my Micro USB port (at least I think it is).
[Long story]
I've got a very annoying issue right now. Today I flashed Team ICSSGS RC4.1. Later when I connected my Galaxy S to my PC with the usb cable, no recharging icon appeared and my pc did not react to the connection at all.
Thinking it was a bug in RC4.1 (as OneCosmic RC 2.3 had the mass storage issue) I searched the ICSSGS thread, but not a single issue about mass storage mode was posted. So I flashed Devil kernel, hoping to fix it, but it didn't. Reflashed RC4.1, but problem still persisted.
I went radical and recovered a nandroid backup in CWM of ICSSGS RC3.0 (the one is was running earlier today), but somehow the recovery failed and left me with a semi-bricked phone. (Actually the 2nd time in a row when recovery semi-bricked my phone.)
Only download mode works. Recovery and normal boot bootloop.
[/Long story]
In short:
When connecting to PC to flash with Odin:
-At first the PC did not even notice the phone being connected through USB. Nothing happens.
-After blowing in the contacts of the Micro USB port, PC recognizes connection, but gives "Unknown device" error upon connecting. Reinstalling Samsung drivers does not work at all. Tested on laptop and home PC.
-Somehow I always have to blow into the Micro USB port to create contact and to get the PC to recognize a connection. But that's about it. "Unknown device" every time.
-When I plug in wall charger, the big battery icon appears, but stays grey all the time and after half a minute the phone boots, starting the bootloop.
Could it be that my Micro USB port is broken?
Any solution for this?
Thanks in advance!
I feel so stupid for recovering that nandroid backup. Otherwise my phone would still be working...
you will need the nexus drivers for your comp found here : w w w.multiupload.co.uk/BUCFT8M42 as your samsung drivers are no use now.
Thanks for your advice: Going to test it right away.
Unfortunately your link does not work for me.
I had the same problem but replacing the cable solved it.
Sorry for the duff link http://www.multiupload.co.uk/BUCFT8M42N
japperrrr said:
I had the same problem but replacing the cable solved it.
Click to expand...
Click to collapse
Tested this morning with someone else's cable, still the same issue.
Tried the Nexus driver, but still nothing. Also having troubles again to let the usb connection register. It connected after cleaning it, but now it does not seem to connect at all.
Could it be that the phone is completely busted and therefor breaks usb connection?
Haven't heard such a story yet, but is it possible?
I've got it sorted out.
Since it might be helpful for others that are searching for a solution:
1. I cleaned out my Micro-USB port using micro interdental brushes and a few drops of isopropyl alcohol. It also doesn't hurt to clean the contacts of your USB cable, just to be sure.
2. Connected the phone to my PC. This time my pc recognized it as a serial gadget.
3. Disconnected the phone and installed Nexus S driver (because of ICS rom on my Galaxy S)
Next connection my device was automatically recognized as an android phone.
Odin saw my phone as well and I could flash again!
My phone is back on Team ICSSGS RC4.2.
Thanks everyone for helping!
Same Issue cant fix
Hey guys im glad to see others are having the same issue but i cant seem to fix mine.
Assume im an idiot and ive missed something out but ill explain my situation....
Galaxy i9000 - windows 7 32bit - put ics on it a few weeks back following a guide on youtube (had never used odin or anything like that before) got it working but now have no usb comm options in the ics settings. now when i plug the usb (when it does detect at all) it says driver havent worked - device manager shows unknown device - i try update the driver and it says the best driver is already installed.
Im completely stuck and want to revert back to gingerbread so i can use my usb functions again. If i can get odin to see my phone again ill be relieved.
Any ideas?
Cheers guys! Seán.
subcultural said:
I've got it sorted out.
Since it might be helpful for others that are searching for a solution:
1. I cleaned out my Micro-USB port using micro interdental brushes and a few drops of isopropyl alcohol. It also doesn't hurt to clean the contacts of your USB cable, just to be sure.
2. Connected the phone to my PC. This time my pc recognized it as a serial gadget.
3. Disconnected the phone and installed Nexus S driver (because of ICS rom on my Galaxy S)
Next connection my device was automatically recognized as an android phone.
Odin saw my phone as well and I could flash again!
My phone is back on Team ICSSGS RC4.2.
Thanks everyone for helping!
Click to expand...
Click to collapse
dieselno7 said:
Any ideas?
Cheers guys! Seán.
Click to expand...
Click to collapse
USB solutions http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
But most of all, check your usb cable and try switching to another USB port after rebooting your PC

[Q] [q] USB BRICK - Devs PLZ HELP!!!

I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
[THINGS I'VE TRIED THAT DID NOT FIX THE ISSUE]
1. Factory Reset.
2. Used Mobile Odin, reverted to my Phone's Stock GB ROM (KK2). On stock GB, I tried Kies Air and that worked fine, but USB connection had the same issue. Also tried Stock ICS via Mobile Odin
3. Formatted the Internal Storage
4. Removed the SIM Card and Micro SD card, still no luck.
5. re-installed CWM manually (without pc)
6. Tried various different roms in the development section
7. Called Samsung... They said they wont service my phone because I'm located in Canada and I have the International Note. They told me I'd have to take it to the country I bought it from.
8. Replaced the micro USB hardware component inside the phone (bought it from ebay)
9. Tried a Jig to see if it recognizes that and it booted me into download mode but doesn't recognize the USB connection to PC.
I've been struggling with this issue for the past 2 months and have gotten sick of this issue.:crying: I've tried all that was possible based on my knowledge and now I need some serious help. I've posted this issue in the Q&A before and about 3 people responded with suggestions that I had already mentioned in thread. I believe this issue might be caused by a file that has gotten corrupted on the phone because i've even replaced the hardware (usb port) and it didn't change anything. If anyone can offer any help/suggestions that would be great. Sorry for making this such a long post but I really need some help and wanted to give as much info as possible.
Thanks in advance.
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
kopitalk said:
I had that same problem before, it's really frustrating having tried so many stuff before finally I gave up and went to service center to replace the usb hardware module, which solves the problem. When I asked them why it happened and how to prevent that same thing to happen again, they didn't answer.
Click to expand...
Click to collapse
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
ssyed said:
I've already replaced the usb hardware module myself. I bought it from ebay. It didnt change anything.
Click to expand...
Click to collapse
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
praetorius said:
1. You bought it from ebay
2. You changed it personally
Send it in for proper repair.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
I am well versed in replacing hardware components myself. The usb module I bought from ebay does exactly the same thing as the original one. It too charges but does not recognize PC connectivity which means it wasnt the usb module which was defective, its something else!
I would love to send it in for repair, but Samsung WON'T service my phone because I live in Canada and they do not sell the international Note here. When I called them they told me to take it to where I bought it from (which was in UAE). Since I am not going there and have no plans to go there, I am stuck with a phone that can't be warrantied!
Any one know how to fix this issue?
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
kopitalk said:
Maybe what you need is just to replace the usb cable... Who knows? (trying-to-help mode).
Click to expand...
Click to collapse
I've tried multiple different cables, including the original, in multiple different usb ports! nothing works.
I appreciate the suggestions tho
Try another set of driver from Samsung.
The set in the file from link below works perfectly for me:
http://www.mediafire.com/?ager59qlwy35q50
If it does not work then, maybe, try to change rom. Load a custom rom.zip to external sdcard and flash using CWM.
cheers.
I had the somewhat similar problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
darthvedor said:
I had the same problem, few days back and started a thread.
http://forum.xda-developers.com/showthread.php?t=1732686
Ok here is the solution. It worked for me. Hope it helps someone
1. download latest version of kies for PC
2. uninstall previous kies (if any) and install new one.
3. On the cell phone, dial the following number: *#7284#
Once the last # is hit, the PhoneUtil application is launched. Choose USB -> Modem and then USB -> PDA mode. (Even if the mode is PDA, switch to Modem and then back to PDA.)
4. Plug the USB cable.
Click to expand...
Click to collapse
Hmm it looks like your issue was different.. at least you were getting some sort of message that you connected your phone. When I connect it to the computer, its as if nothing happened. I've even tried linux and its just that the phone isnt recognizing its connected to a computer, it thinks its connected to a charger.
I tried your suggested solution, still no avail!
ssyed said:
it thinks its connected to a charger.
Click to expand...
Click to collapse
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
darthvedor said:
if you have CWM installed, just boot into CWM Recovry >
advance > wipe battery status
turn off the phone, remove battery for 3 mins and than reboot normally. Let us know, if it works.
Click to expand...
Click to collapse
Just tried that... didnt work
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
abhijit038 said:
I faced a similar problem a few days ago. Here's what I did :
Try cleaning micro usb port by rubbing alcohol using paper strips. They should be thin enough so that you can clean both top and bottom part of the port.Then let it dry under the sun or by itself.Make sure that you don't blow any air into the port else condensation may occur.
By the way, is it monsoon season there in Canada ?
Click to expand...
Click to collapse
I bought a whole new micro usb module and replaced it. Still didnt change anything.
lol our weatherman is messed up, and where I live, its just been hot and dry for the most part.
i had the same problem before...try changing the rom ...that worked for me
ssyed said:
I have a USB BRICK and wishing that someone could help me fix it
[STORY]
My phone was working perfectly until a few days ago when I noticed that USB connection to PC stopped working. I was running imilkas CM9 v2. USB used to work perfectly and then randomly, it just stopped working, I don't have a clue what caused it because I did not flash anything on the phone.
When I connect my Phone to the Computer via USB cable, my phone start charging and nothing else happens. My computer does not even show that I connected a USB device.
I've tried 3 other computers with the drivers and the same issue (1 comp with xp and the others with win 7). Also, not to mention, I've tried multiple USB cables, including the original. I've tried USB Debugging on and off, doesn't make a difference.
I've tried ADB and it does not recognize the device either.
In CWM when I mount USB storage, it does not work.
In download mode, when I plug in the cable, nothing happens, odin does not detect any connection.
USB connection to the computer is Dead and it does nothing but charge my phone. I've searched this issue and I believe its called a USB BRICK
Click to expand...
Click to collapse
Almost same situation here from the highlighted above. when I plug my charger in the usb it just charge the phone and PC cannot detect it. Also, it only charge the phone when i reboot it. If I unplug the charger while the phone is on, and plug the charger back, it will not charge. However, when I insert the usb cable in my phone, there is a notification in my phone which says "usb connector connected" but the PC cannot detect my phone for mass storage, as well as for Kies and Odin.
My usb port was already replaced by Samsung but same problem still occurs. It could be a software/configuration related issue. Or could it be a usb brick? Pls help.
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
I have the same problem ... :crying:
nokiamodeln91 said:
have you tried to put the phone in download mode and checked if odin is able to detect the phone.. what rom are you on.. have you tried to flash a stock rom ?
Click to expand...
Click to collapse
Yes, tried on download mode but odin cannot detect it.
Joined the group of USB Brick ....

[Q] Not able to connect to PC using USB cable

Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
musicking said:
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
Click to expand...
Click to collapse
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
xonar_ said:
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
Click to expand...
Click to collapse
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
musicking said:
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
Click to expand...
Click to collapse
You can root your phone from there. If you have SW Update. I recommend taking it into the shop if you are still under warranty, If you don't have warranty then you can go ahead and root. Just install a patched bin and fls with Smart Flash Tool. It's one of the stickies (How to unbrick, I think)
hi
new to Android nation
I have the same issue when connecting to USB...
And I managed to flash with custom firmware (latest ZEUS version) and I rooted but the issue with USB connection is still there...
Anyway, I wiil try connecting it to Linux to check if that would work with USB connecting
UPDATE:
OK after some digging, I managed to (at least temporally) solve the issue... After fresh installing official 2.3.4 firmware I booted to recovery and from there formatted the system folder and then installed Zeus v7 firmware... anyway, USB connection and charging indicator work fine at first booting to system... As soon as I reboot the OS USB connection (and charging) get unstable, and after third reboot it completely goes away and the device does not recognize anything: if I connect USB cable it does not show any sing (charging indicator does not show battery charging, nor the device offers me to connect in mass storage, windows recognizes only modem but not the USB storage) and when I connect charger, battery indicator does not flash as charging... Battery monitor tool shows that "battery is discharging" even though the battery capacity seems to increase (according to growing percentage of battery capacity)... Is there a some kind of USB server... I am a total noob to Androiid OS (used to be Symibian from its beggining )so I hope you won`t mind if I used wrong terms in my explanation/comment...
I hope my explanation is not confusing
Cheers
UPDATE 2:
After installing Zeus v7.01 update, battery charging recognition got fixed using both USB cable and wall charger...
Anyway, USB recognition by PC problem still exists... But when in recovery mode I can successfully mount SD card to PC in Mass storage mode...
Will keep you updated... :victory:

[Q] Sony Xperia T LT30P hard bricked?

Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
biegan said:
Hi i have Xperia T which was fully working and my friend tries to make downgrade with Flashtool... i don't know exacly what he has done i'm trying to get it back alive but Setool didn't recognise the phone original update program also when i connect it to USB it is recognised by pc as Zeus Flash device on other computer as qualcoomm device any idea how i can unbrick it? i have to add pc recognise the phone without pushing any button with volume down or up is the same it is recognised also when i disconnect the battery when i tries to power it up nothing happens please help!!
Click to expand...
Click to collapse
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
gregbradley said:
calm down. Follow the instrctions in the third thread in the general section about how to recover froma soft brick. Its here
Follow those instructions and post here if you have any problems. Preferably with screen shots of what your PC/Phone is doing.
Click to expand...
Click to collapse
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
biegan said:
I will describe what programs showing because i have polish version and maybe you can't understand them:
When i'm trying to connect to pc companion when pc recognise phone i'm geting message PC companion could not connect with device disconnect device and try again
When trying do sof/hard reset nothing happens
When trying to pull in fastboot or flash mode pc recognise phone always the same in conrtol panel ZEUS FLASH device pc also recognise in thisa mode without battery and without pushing any buttons but i'm not geting any led Green or blue only when i'm conecting charger or usb cable WITHOUT battery it blinks red ones
When i'm trying to flash with flashtool or original update service when program is on screen asking me to connect the device i plug usb pc recognising the phone (usb connected device sound) but program doesn't start to flash or even recognise
i have also setool when i'm trying to flash by setool when program is waiting for device connecting bar is moving on down side of window when i connect the phone it is stoping like it tries to connect but nothing happens....
i was thinking to try this but i have cheked battery voltage and it is 3,88 so i thing it is fully charged:
Here are the steps I took successfully revise my phone from soft brick.
Let the phone charge (long long time = 4+ hrs) on wall charger.
Red light on (constantly - not flashing) - charge until red light off (again very long time =16+ hrs)
Unplug from wall
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
While hold volumn down and plug in USB
Red light will be back on, after a few seconds - flash will run.
Unplug USB then power on - phone will boot and die (it's okay don't worry)
Charge the phone again - after a while (or let it charge full), you can now turn on the phone.
That is all ... Back and running.
GOOD Luck.
Timing = could be different from phone to phone - depends on battery of the phone before it dead.
please do you have any idea? for me it hangs in some kind of boot mode and i don't know how to kick it fromthis and reflash if any screens can help please tell me i will do them
Click to expand...
Click to collapse
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
biegan said:
I want to add when i'm trying to connect for example SE ARC it is recognised as SEMC Flash Device and all programs recognising it
Click to expand...
Click to collapse
I forgot to add when i'm doing test point to unlock for example ARC it is also recognised as ZEUS Flash so i thing it stays in some king of boot mode but there is no information in the net how to kick it out or even do jtag because i can doit also but i think it is not supported yet
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Run flashtool from PC and run flash .111 until it asks to put phone in flashmode
Click to expand...
Click to collapse
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
gregbradley said:
You have an xperia T, then how can you connect the phone to the PC WITHOUT a battery? It is not removable in the Xperia T!
Have you flashed anything to the device before this happened?
EDIT
Which firmware is .111? I dont beleive there has ever been a .111 firmware for the T? Can you give me the post you found that in and the download link, thanks
Click to expand...
Click to collapse
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
biegan said:
i disassemble the back cover it's very simple the battery connector is on the flex cable i know what i'm talking if you want i can send pics i'am using flashifile LT30p_7.0.A.1.303_CH the most important think that no program is detecting the phone only pc recognising the phone
Click to expand...
Click to collapse
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
gregbradley said:
OK,
Yes thats true but it sounds similar to a problem I have come across before. But this happened when someone flashed the S1 update on the TX instead of the T.
Have you unistalled evrything android/sdk/adb related from your computer and started again.
Also, you can try another machine.
Are you on win8? That has issues with drivers from Sony.
Click to expand...
Click to collapse
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
biegan said:
Hi no i didn't try i always use XP for software problems with phones i don't knoiw exacly what he did with the phone you think when i try to do it on clean system should help? i tried on 2 computers and problem is the same i think to general problem is that computer recognising the phone like a ZEUS FLash not SEMC Flash device i think somehow he erase whole flash or write from other model and now i can't do anythink
Click to expand...
Click to collapse
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
gregbradley said:
Yes, it sounds like your friend has done something silly to the phone. Untill we know exactly what he did, and what he tried to flash we are just guessing...
Click to expand...
Click to collapse
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
biegan said:
All i know he told me he tries to downgrade the phone to make a root and he was using flashtool is there any other methods/programs which can flash lt30p? i have all service boxes like riff box setool but riff don't make it setool can't start flashing i don't know any testpoint or jtag?
Click to expand...
Click to collapse
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
gregbradley said:
I dont know where testpoint is on xperia T as we have never been down that road here.
Has he tried to use EMMA to flash something? That is meant only for unlocked bootloaders, maybe he has messed up with that, but I am onl guessing here and i cant really see why that would do anything to the boot...
Maybe he tried to flash it, dropped it, broke it, and thinks a software hack can help him....
Click to expand...
Click to collapse
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
biegan said:
No it is 100% software problem he is noob in this and all he told me he trried to root the phone but first he tried to downgrade it with flashtool but if flashtool doens't recognise the phone setool also do you think there is any other option?
Click to expand...
Click to collapse
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
gregbradley said:
Not that I know of. Bin4ry is someone who has experience with setool and may be able to help. Try PM'ing him.
Sorry I couldnt be of much more use.
Click to expand...
Click to collapse
Thanks bro anyway for your help!!
any update about your device...
i have exactly same problem as you mentioned but my device is Xperia V (LT25i)....
waiting for your reply. please do update.
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
bambox said:
I also had the same problem, my cell phone xperia v. .. please help me .... What can I do now?
Click to expand...
Click to collapse
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
gregbradley said:
what have you already done to try and fix it?
What did you do to make it not work?
What are the symptoms of your phone?
Click to expand...
Click to collapse
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
bambox said:
a week ago I upgraded to 4.1.2, and using kernel vKernel_Xperia_V_1.2.5
after 1 week of use, I reboot my xperia v, but do not want to live anymore, Charging not respont, could not power on, flsahmode and fasbootmode.
my xperia v die, but still 70% battery.
on my pc not detect (only ZEUS FLASH DEVICE)
Click to expand...
Click to collapse
put it on charge for 24 hours and leave it alone.
after the 24 hours turn it on.

[Q] Problem with connecting LG P970 to PC

Hello people
I'm new here, in terms of asking questions and seeking help
I have the LG Optimus P970
A few days ago I made ​​the update to ICS, and by proceeding with this page, hackmyandroid.com/optimus-black-p970-official-ics-update/3299
After that, not impossible to connect the phone to a PC, even the software update mode, it can not recognize, anyway to connect it just throws a slow charging.
Is there someone who knows what it is.
I'd love to go back to the old software, but there is no way to detect it pc
Sorry for my bad english
Thanks in advance
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
edzunic said:
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
Click to expand...
Click to collapse
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
ferhpsquad said:
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
Click to expand...
Click to collapse
I have the original cable, but still the same problem.
I have all drivers installed, I can transfer files between the phone and the pc, I can use the LG suite,
But I can't see my phone on the ADB console, I can't use smartflashtool cause the phone isn't recoginized.
yesterday I tried with lg cable, and wall charger, in both cases, said slow charging the battery, I tried on three different computers, I tried to reinstall the drivers, like the software blocked communication with the phone, just charge the battery.
If there was a way to put the software through SD card, it might solve the problem.
even the software update mode, the computer does not see the phone
Bro! For the softwaretool like smartflash, You need to boot into download mode i.e., You need to switch off the phone, plug in the USB cable connected to the PC and instantly press the volume up button. Then the tool will recognise Your phone. Try it and check once!
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
edzunic said:
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
Click to expand...
Click to collapse
Try to boot your PC with disabled driver signatures, or use a 32bit windows system.
try entering download-mode the following way:
disconnect your phone from pc
remove battery
press and hold Vol-up
connect the usb-cable (still without battery)
Now the phone should be detected as a serial-cable device an you can use the smart flash tool.
would have to be sound,
no sound when I connect the phone to the PC
Solved my problem.
Seems like windows automatically installs driver to the phone, but it partially works.
Unistall all drivers for the phone, or try on a new computer.
Plug the phone and cancel the driver search by windows
Install drivers for LG (unplug the phone before)
Turn it off
Plug the cable and enter download mode
And there is the phone recognized on smartflashtool.
I'm flashing a new one right now, thank you.
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
edzunic said:
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
Click to expand...
Click to collapse
I got same problem.
bollix said:
I got same problem.
Click to expand...
Click to collapse
add me!
Connection Problem with Mackay 2.999
Hey Guys,
first of all, sorry for my not so good English
I'am at Mackay 2.999 with last Kernel of his build and can't connect the Phone to the Computer.
It only install the LGE Mobile Composite USB Device, the LGE Mobile USB Serial Port and the LGE Mobile USB Modem on connecting to the Workstation.
I had test it on many Computers but the Problem is all the same: I can't get on my Memory or ADB.
I also had testet all modes under the setting point (MTP/PTP/mass storage device) and with debbuging on and off.
On my Workstation is the Last Version of ADB (1.0.31) installed.
Did anyone know the problem?
Did no one know a result to this problem
Hmmm my PC also can't read my storage what I did is go to cwm and plugged in usb cable and pressed mount storage it seems to solve my problem. I also did a cache and dalvik cache wipe.
Hey, I have found the result to this problem. You must flash another Baseband. Use from Nooby the V30 Baseband and it is solved.
Gruß Ernst
via Tapatalk 2
but how to flash, when can´t connect to pc
lg optimus
hi frendz ,
please help me out
i'm using lg optimus p970..last night my phone memory get full and mobile get turn off ..now it wont turn on even battery is fully charged...only LG logo shows nithing else...
Hy guys , i have the same problem . I updated to 4.4.2 Nameless ROM and i can't connect my phone to pc . The only action that it's done : charging the phone and that's all . I tried connecting to another pc but with no result . An error appeared :" LGE USB Device - No driver found " .Before 4.4.2 i had 4.1.2 from CyanogenMod and with that ROM i had no problem connecting the phone to the pc . Any help ?

Categories

Resources